iio: afe: add temperature rescaling support
Subsystems (3)
v15 cover iio: afe: add temperature rescaling support
Jonathan, Peter, Andy,
This series focuses on adding temperature rescaling support to the IIO Analog Front End (AFE) driver.
The main changes to the AFE driver include an initial Kunit test suite, support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs and temperature transducer sensors.
Thanks for your time,
Liam
Changes since v14:
- Revert units.h changes in favor of "raw" values
Changes since v13:
- fix SI prefix in rescale_temp_sense_rtd_props()
- add comment explaining SI prefixes are sometimes used as mathematical multipliers with no particular physical meaning associated.
Changes since v12:
- rebase on latest testing branch
- fix copyright holder in newly created header file
- add myself as a copyright holder of the iio-rescale.c driver at Peter's suggestion
- fix undefined behavior on left-shift operation
Changes since v11:
- update commits with my personal email since all this work was done on my own time
- apply Peter's Reviewed-by to my local tree
- fix use of units.h
- make use of units.h more consistently in iio-rescale.c and in the tests
- fix #include ordering
- treat 04/16 as a fix. Move it, and add a Fixes: tag
- fix undefined behavior on left-shift operation
- add comment about fract_mult with iio_str_to_fixpoint()
- reword commit message for 14/16, based on Andy's comments
Changes since v10:
- apply Andy's suggestion for offset calculations
- make use of units.h more consistently
Changes since v9:
- make use of linux/units.h
- reorder commits, fix fract_log2 before merging fract
- keep fractional representation when not overflowing
Changes since v8:
- reword comment
- fix erroneous 64-bit division
- optimize and use 32-bit divisions when values are know to not overflow
- keep IIO_VAL_FRACTIONAL scale when possible, if not default to fixed point
- add test cases
- use nano precision in test cases
- simplify offset calculation in rtd_props()
Changes since v7:
- drop gcd() logic in rescale_process_scale()
- use div_s64() instead of do_div() for signed 64-bit divisions
- combine IIO_VAL_FRACTIONAL and IIO_VAL_FRACTIONAL_LOG2 scale cases
- switch to INT_PLUS_NANO when accuracy is lost with FRACTIONAL scales
- rework test logic to allow for small relative error
- rename test variables to align error output messages
Changes since v6:
- rework IIO_VAL_INT_PLUS_{NANO,MICRO} based on Peter's suggestion
- combine IIO_VAL_INT_PLUS_{NANO,MICRO} cases
- add test cases for negative IIO_VAL_INT_PLUS_{NANO,MICRO} corner cases
- force use of positive integers with gcd()
- reduce risk of integer overflow in IIO_VAL_FRACTIONAL_LOG2
- fix duplicate symbol build error
- apply Reviewed-by
Changes since v5:
- add include/linux/iio/afe/rescale.h
- expose functions use to process scale and offset
- add basic iio-rescale kunit test cases
- fix integer overflow case
- improve precision for IIO_VAL_FRACTIONAL_LOG2
Changes since v4:
- only use gcd() when necessary in overflow mitigation
- fix INT_PLUS_{MICRO,NANO} support
- apply Reviewed-by
- fix temperature-transducer bindings
Changes since v3:
- drop unnecessary fallthrough statements
- drop redundant local variables in some calculations
- fix s64 divisions on 32bit platforms by using do_div
- add comment describing iio-rescaler offset calculation
- drop unnecessary MAINTAINERS entry
Changes since v2:
- don't break implicit offset truncations
- make a best effort to get a valid value for fractional types
- drop return value change in iio_convert_raw_to_processed_unlocked()
- don't rely on processed value for offset calculation
- add INT_PLUS_{MICRO,NANO} support in iio-rescale
- revert generic implementation in favor of temperature-sense-rtd and temperature-transducer
- add separate section to MAINTAINERS file
Changes since v1:
- rebase on latest iio testing branch
- also apply consumer scale on integer channel scale types
- don't break implicit truncation in processed channel offset calculation
- drop temperature AFE flavors in favor of a simpler generic implementation
Liam Beguin (10):
iio: afe: rescale: expose scale processing function
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: add offset support
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: reduce risk of integer overflow
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: add RTD temperature sensor support
iio: afe: rescale: add temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
dt-bindings: iio: afe: add bindings for temperature transducers
.../iio/afe/temperature-sense-rtd.yaml | 101 +++ .../iio/afe/temperature-transducer.yaml | 114 +++ drivers/iio/afe/iio-rescale.c | 283 ++++++- drivers/iio/test/Kconfig | 10 + drivers/iio/test/Makefile | 1 + drivers/iio/test/iio-test-rescale.c | 710 ++++++++++++++++++ include/linux/iio/afe/rescale.h | 36 + 7 files changed, 1220 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml create mode 100644 drivers/iio/test/iio-test-rescale.c create mode 100644 include/linux/iio/afe/rescale.h
Range-diff against v14:
-: ------------ > 1: ee26b0eeac65 iio: afe: rescale: expose scale processing function
1: a510097c83f1 ! 2: 78f9d37575a5 iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support@@ Commit message
## drivers/iio/afe/iio-rescale.c ##
-@@
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
-+#include <linux/units.h>
-
- #include <linux/iio/afe/rescale.h>
- #include <linux/iio/consumer.h>
@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale, int scale_type,
int *val, int *val2)
{
@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+ return scale_type;
+ case IIO_VAL_INT_PLUS_NANO:
+ case IIO_VAL_INT_PLUS_MICRO:
-+ mult = scale_type == IIO_VAL_INT_PLUS_NANO ? GIGA : MEGA;
++ mult = scale_type == IIO_VAL_INT_PLUS_NANO ? 1000000000L : 1000000L;
+
+ /*
+ * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val
2: 8f2f2699a9b4 ! 3: 5be82bd72453 iio: afe: rescale: add offset support
@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+ *val = div_s64(tmp, scale) + schan_off;
+ return IIO_VAL_INT;
+ case IIO_VAL_INT_PLUS_NANO:
-+ tmp = (s64)rescale->offset * GIGA;
-+ tmp2 = ((s64)scale * GIGA) + scale2;
++ tmp = (s64)rescale->offset * 1000000000LL;
++ tmp2 = ((s64)scale * 1000000000LL) + scale2;
+ *val = div64_s64(tmp, tmp2) + schan_off;
+ return IIO_VAL_INT;
+ case IIO_VAL_INT_PLUS_MICRO:
-+ tmp = (s64)rescale->offset * MEGA;
-+ tmp2 = ((s64)scale * MEGA) + scale2;
++ tmp = (s64)rescale->offset * 1000000LL;
++ tmp2 = ((s64)scale * 1000000LL) + scale2;
+ *val = div64_s64(tmp, tmp2) + schan_off;
+ return IIO_VAL_INT;
+ default:
3: 2efa970bad26 ! 4: 95ec184759f6 iio: afe: rescale: fix accuracy for small fractional scales
@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+ return IIO_VAL_INT_PLUS_NANO;
case IIO_VAL_INT_PLUS_NANO:
case IIO_VAL_INT_PLUS_MICRO:
- mult = scale_type == IIO_VAL_INT_PLUS_NANO ? GIGA : MEGA;
+ mult = scale_type == IIO_VAL_INT_PLUS_NANO ? 1000000000L : 1000000L;
4: 201037c0ead8 = 5: 2e1d41ef69d9 iio: afe: rescale: reduce risk of integer overflow
5: a0037cc3ee90 < -: ------------ iio: afe: rescale: make use of units.h
6: f8d47728f482 ! 6: 0b6c029dea1d iio: test: add basic tests for the iio-rescale driver
@@ drivers/iio/test/iio-test-rescale.c (new)
+
+#include <linux/gcd.h>
+#include <linux/overflow.h>
-+#include <linux/units.h>
+
+#include <linux/iio/afe/rescale.h>
+#include <linux/iio/iio.h>
@@ drivers/iio/test/iio-test-rescale.c (new)
+ if (tmp < 0)
+ tmp2 *= -1;
+
-+ *nano = (s64)tmp * GIGA + tmp2;
++ *nano = (s64)tmp * 1000000000UL + tmp2;
+
+ return ret;
+}
@@ drivers/iio/test/iio-test-rescale.c (new)
+ return -EINVAL;
+ }
+
-+ err = MEGA * abs(exp - real);
++ err = 1000000UL * abs(exp - real);
+
+ return (int)div64_u64(err, abs(exp));
+}
7: a04685586340 ! 7: 951ea44d0f5c iio: afe: rescale: add RTD temperature sensor support
@@ drivers/iio/afe/iio-rescale.c: static int rescale_voltage_divider_props(struct d
+ return ret;
+ }
+
-+ tmp = r0 * iexc * alpha / MEGA;
-+ factor = gcd(tmp, MEGA);
-+ rescale->numerator = MEGA / factor;
++ tmp = r0 * iexc * alpha / 1000000;
++ factor = gcd(tmp, 1000000);
++ rescale->numerator = 1000000 / factor;
+ rescale->denominator = tmp / factor;
+
-+ rescale->offset = -1 * ((r0 * iexc) / KILO);
++ rescale->offset = -1 * ((r0 * iexc) / 1000);
+
+ return 0;
+}
8: e3b716aaee50 ! 8: 56516fdc67bf iio: afe: rescale: add temperature transducers
@@ drivers/iio/afe/iio-rescale.c: static int rescale_temp_sense_rtd_props(struct de
+ return ret;
+ }
+
-+ rescale->numerator = MEGA;
++ rescale->numerator = 1000000;
+ rescale->denominator = alpha * sense;
+
+ rescale->offset = div_s64((s64)offset * rescale->denominator,
9: 22ae1458eb8b = 9: 8c409050990b dt-bindings: iio: afe: add bindings for temperature-sense-rtd
10: 33825ad452d6 = 10: bb39296590f3 dt-bindings: iio: afe: add bindings for temperature transducersbase-commit: cd717ac6f69db4953ca701c6220c7cb58e17f35a
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 1/10 iio: afe: rescale: expose scale processing function
In preparation for the addition of kunit tests, expose the logic responsible for combining channel scales.
--- drivers/iio/afe/iio-rescale.c | 65 ++++++++++++++------------------- include/linux/iio/afe/rescale.h | 32 ++++++++++++++++ 2 files changed, 60 insertions(+), 37 deletions(-) create mode 100644 include/linux/iio/afe/rescale.h
drivers/iio/afe/iio-rescale.c +28 -37
@@ -15,32 +15,43 @@#include <linux/platform_device.h> #include <linux/property.h> +#include <linux/iio/afe/rescale.h> #include <linux/iio/consumer.h> #include <linux/iio/iio.h> -struct rescale ; - -struct rescale_cfg { -enum iio_chan_type type; -int (*props)(struct device *dev,struct rescale *rescale); -}; +int rescale_process_scale (struct rescale *rescale,int scale_type, +int *val,int *val2) +{ +s64 tmp; -struct rescale { -const struct rescale_cfg *cfg; -struct iio_channel *source; -struct iio_chan_spec chan; -struct iio_chan_spec_ext_info *ext_info; -bool chan_processed; -s32 numerator; -s32 denominator; -}; +switch (scale_type) { +case IIO_VAL_FRACTIONAL : + *val *= rescale->numerator; + *val2 *= rescale->denominator; +return scale_type; +case IIO_VAL_INT : + *val *= rescale->numerator; +if (rescale->denominator ==1 ) +return scale_type; + *val2 = rescale->denominator; +return IIO_VAL_FRACTIONAL ; +case IIO_VAL_FRACTIONAL_LOG2 : + tmp = (s64)*val *1000000000LL ; + tmp =div_s64 (tmp, rescale->denominator); + tmp *= rescale->numerator; + tmp =div_s64 (tmp,1000000000LL ); + *val = tmp; +return scale_type; +default : +return -EOPNOTSUPP ; + } +}static int rescale_read_raw (struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int *val,int *val2,long mask) {struct rescale *rescale =iio_priv (indio_dev); -s64 tmp;int ret;switch (mask) {
@@ -66,27 +77,7 @@ static int rescale_read_raw(struct iio_dev *indio_dev, }else { ret =iio_read_channel_scale (rescale->source, val, val2); } -switch (ret) { -case IIO_VAL_FRACTIONAL : - *val *= rescale->numerator; - *val2 *= rescale->denominator; -return ret; -case IIO_VAL_INT : - *val *= rescale->numerator; -if (rescale->denominator ==1 ) -return ret; - *val2 = rescale->denominator; -return IIO_VAL_FRACTIONAL ; -case IIO_VAL_FRACTIONAL_LOG2 : - tmp = (s64)*val *1000000000LL ; - tmp =div_s64 (tmp, rescale->denominator); - tmp *= rescale->numerator; - tmp =div_s64 (tmp,1000000000LL ); - *val = tmp; -return ret; -default : -return -EOPNOTSUPP ; - } +return rescale_process_scale (rescale, ret, val, val2);default :return -EINVAL ; }
include/linux/iio/afe/rescale.h new file +32 -0
@@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (C) 2018 Axentia Technologies AB +*/ + +#ifndef __IIO_RESCALE_H__ +#define __IIO_RESCALE_H__ + +#include <linux/types.h> +#include <linux/iio/iio.h> + +struct device ; +struct rescale ; + +struct rescale_cfg { +enum iio_chan_type type; +int (*props)(struct device *dev,struct rescale *rescale); +}; + +struct rescale { +const struct rescale_cfg *cfg; +struct iio_channel *source; +struct iio_chan_spec chan; +struct iio_chan_spec_ext_info *ext_info; +bool chan_processed; +s32 numerator; +s32 denominator; +}; + +int rescale_process_scale (struct rescale *rescale,int scale_type, +int *val,int *val2); +#endif /* __IIO_RESCALE_H__ */
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 2/10 iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
In reply to Liam BeguinSome ADCs use IIO_VAL_INT_PLUS_{NANO,MICRO} scale types. Add support for these to allow using the iio-rescaler with them.
--- drivers/iio/afe/iio-rescale.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
drivers/iio/afe/iio-rescale.c +34 -0
@@ -23,6 +23,9 @@ int rescale_process_scale(struct rescale *rescale, int scale_type, int *val, int *val2) { s64 tmp; +s32 rem; +u32 mult; +u32 neg;switch (scale_type) {case IIO_VAL_FRACTIONAL :
@@ -41,6 +44,37 @@ int rescale_process_scale(struct rescale *rescale, int scale_type, tmp *= rescale->numerator; tmp =div_s64 (tmp,1000000000LL ); *val = tmp; +return scale_type; +case IIO_VAL_INT_PLUS_NANO : +case IIO_VAL_INT_PLUS_MICRO : + mult = scale_type ==IIO_VAL_INT_PLUS_NANO ?1000000000L :1000000L ; + +/* +* For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val +* OR *val2 is negative the schan scale is negative, i.e. +* *val = 1 and *val2 = -0.5 yields -1.5 not -0.5. +*/ + neg = *val <0 || *val2 <0 ; + + tmp = (s64 )abs (*val) *abs (rescale->numerator); + *val =div_s64_rem (tmp,abs (rescale->denominator), &rem); + + tmp = (s64 )rem * mult + (s64 )abs (*val2) *abs (rescale->numerator); + tmp =div_s64 (tmp,abs (rescale->denominator)); + + *val +=div_s64_rem (tmp, mult, val2); + +/* +* If only one of the rescaler elements or the schan scale is +* negative, the combined scale is negative. +*/ +if (neg ^ ((rescale->numerator <0 ) ^ (rescale->denominator <0 ))) { +if (*val) + *val = -*val; +else + *val2 = -*val2; + } +return scale_type;default :return -EOPNOTSUPP ;
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 3/10 iio: afe: rescale: add offset support
In reply to Liam BeguinThis is a preparatory change required for the addition of temperature sensing front ends.
--- drivers/iio/afe/iio-rescale.c | 81 +++++++++++++++++++++++++++++++++ include/linux/iio/afe/rescale.h | 4 ++ 2 files changed, 85 insertions(+)
drivers/iio/afe/iio-rescale.c +81 -0
@@ -3,6 +3,7 @@* IIO rescale driver * * Copyright (C) 2018 Axentia Technologies AB +* Copyright (C) 2022 Liam Beguin <[email protected]> * * Author: Peter Rosin <[email protected]> */
@@ -81,11 +82,46 @@ int rescale_process_scale(struct rescale *rescale, int scale_type, } } +int rescale_process_offset (struct rescale *rescale,int scale_type, +int scale,int scale2,int schan_off, +int *val,int *val2) +{ +s64 tmp, tmp2; + +switch (scale_type) { +case IIO_VAL_FRACTIONAL : + tmp = (s64 )rescale->offset * scale2; + *val =div_s64 (tmp, scale) + schan_off; +return IIO_VAL_INT ; +case IIO_VAL_INT : + *val =div_s64 (rescale->offset, scale) + schan_off; +return IIO_VAL_INT ; +case IIO_VAL_FRACTIONAL_LOG2 : + tmp = (s64 )rescale->offset * (1 << scale2); + *val =div_s64 (tmp, scale) + schan_off; +return IIO_VAL_INT ; +case IIO_VAL_INT_PLUS_NANO : + tmp = (s64 )rescale->offset *1000000000LL ; + tmp2 = ((s64 )scale *1000000000LL ) + scale2; + *val =div64_s64 (tmp, tmp2) + schan_off; +return IIO_VAL_INT ; +case IIO_VAL_INT_PLUS_MICRO : + tmp = (s64 )rescale->offset *1000000LL ; + tmp2 = ((s64 )scale *1000000LL ) + scale2; + *val =div64_s64 (tmp, tmp2) + schan_off; +return IIO_VAL_INT ; +default : +return -EOPNOTSUPP ; + } +} +static int rescale_read_raw (struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int *val,int *val2,long mask) {struct rescale *rescale =iio_priv (indio_dev); +int scale, scale2; +int schan_off =0 ;int ret;switch (mask) {
@@ -112,6 +148,47 @@ static int rescale_read_raw(struct iio_dev *indio_dev, ret =iio_read_channel_scale (rescale->source, val, val2); }return rescale_process_scale (rescale, ret, val, val2); +case IIO_CHAN_INFO_OFFSET : +/* +* Processed channels are scaled 1-to-1 and source offset is +* already taken into account. +* +* In other cases, real world measurement are expressed as: +* +* schan_scale * (raw + schan_offset) +* +* Given that the rescaler parameters are applied recursively: +* +* rescaler_scale * (schan_scale * (raw + schan_offset) + +* rescaler_offset) +* +* Or, +* +* (rescaler_scale * schan_scale) * (raw + +* (schan_offset + rescaler_offset / schan_scale) +* +* Thus, reusing the original expression the parameters exposed +* to userspace are: +* +* scale = schan_scale * rescaler_scale +* offset = schan_offset + rescaler_offset / schan_scale +*/ +if (rescale->chan_processed) { + *val = rescale->offset; +return IIO_VAL_INT ; + } + +if (iio_channel_has_info (rescale->source->channel, +IIO_CHAN_INFO_OFFSET )) { + ret =iio_read_channel_offset (rescale->source, + &schan_off,NULL ); +if (ret !=IIO_VAL_INT ) +return ret <0 ? ret : -EOPNOTSUPP ; + } + + ret =iio_read_channel_scale (rescale->source, &scale, &scale2); +return rescale_process_offset (rescale, ret, scale, scale2, + schan_off, val, val2);default :return -EINVAL ; }
@@ -188,6 +265,9 @@ static int rescale_configure_channel(struct device *dev, chan->info_mask_separate =BIT (IIO_CHAN_INFO_RAW ) |BIT (IIO_CHAN_INFO_SCALE ); +if (rescale->offset) + chan->info_mask_separate |=BIT (IIO_CHAN_INFO_OFFSET ); +/* * Using .read_avail() is fringe to begin with and makes no sense * whatsoever for processed channels, so we make sure that this cannot
@@ -352,6 +432,7 @@ static int rescale_probe(struct platform_device *pdev) rescale->cfg =of_device_get_match_data (dev); rescale->numerator =1 ; rescale->denominator =1 ; + rescale->offset =0 ; ret = rescale->cfg->props (dev, rescale);if (ret)
include/linux/iio/afe/rescale.h +4 -0
@@ -25,8 +25,12 @@ struct rescale {bool chan_processed;s32 numerator;s32 denominator; + s32 offset; };int rescale_process_scale (struct rescale *rescale,int scale_type,int *val,int *val2); +int rescale_process_offset (struct rescale *rescale,int scale_type, +int scale,int scale2,int schan_off, +int *val,int *val2);#endif /* __IIO_RESCALE_H__ */
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 4/10 iio: afe: rescale: fix accuracy for small fractional scales
In reply to Liam BeguinThe approximation caused by integer divisions can be costly on smaller scale values since the decimal part is significant compared to the integer part. Switch to an IIO_VAL_INT_PLUS_NANO scale type in such cases to maintain accuracy.
--- drivers/iio/afe/iio-rescale.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)
drivers/iio/afe/iio-rescale.c +17 -3
@@ -24,7 +24,7 @@ int rescale_process_scale(struct rescale *rescale, int scale_type, int *val, int *val2) { s64 tmp; -s32 rem; +s32 rem, rem2;u32 mult;u32 neg;
@@ -43,9 +43,23 @@ int rescale_process_scale(struct rescale *rescale, int scale_type, tmp = (s64)*val *1000000000LL ; tmp =div_s64 (tmp, rescale->denominator); tmp *= rescale->numerator; - tmp =div_s64 (tmp,1000000000LL ); + + tmp =div_s64_rem (tmp,1000000000LL , &rem); *val = tmp; -return scale_type; + +if (!rem) +return scale_type; + + tmp =1 << *val2; + + rem2 = *val % (int )tmp; + *val = *val / (int )tmp; + + *val2 = rem / (int )tmp; +if (rem2) + *val2 +=div_s64 ((s64 )rem2 *1000000000LL , tmp); + +return IIO_VAL_INT_PLUS_NANO ;case IIO_VAL_INT_PLUS_NANO :case IIO_VAL_INT_PLUS_MICRO : mult = scale_type ==IIO_VAL_INT_PLUS_NANO ?1000000000L :1000000L ;
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 5/10 iio: afe: rescale: reduce risk of integer overflow
In reply to Liam BeguinReduce the risk of integer overflow by doing the scale calculation on a 64-bit integer. Since the rescaling is only performed on *val, reuse the IIO_VAL_FRACTIONAL_LOG2 case.
--- drivers/iio/afe/iio-rescale.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)
drivers/iio/afe/iio-rescale.c +18 -5
@@ -24,21 +24,31 @@ int rescale_process_scale(struct rescale *rescale, int scale_type, int *val, int *val2) { s64 tmp; +int _val, _val2;s32 rem, rem2;u32 mult;u32 neg;switch (scale_type) { -case IIO_VAL_FRACTIONAL : - *val *= rescale->numerator; - *val2 *= rescale->denominator; -return scale_type;case IIO_VAL_INT : *val *= rescale->numerator;if (rescale->denominator ==1 )return scale_type; *val2 = rescale->denominator;return IIO_VAL_FRACTIONAL ; +case IIO_VAL_FRACTIONAL : +/* +* When the product of both scales doesn't overflow, avoid +* potential accuracy loss (for in kernel consumers) by +* keeping a fractional representation. +*/ +if (!check_mul_overflow (*val, rescale->numerator, &_val) && + !check_mul_overflow (*val2, rescale->denominator, &_val2)) { + *val = _val; + *val2 = _val2; +return IIO_VAL_FRACTIONAL ; + } + fallthrough;case IIO_VAL_FRACTIONAL_LOG2 : tmp = (s64)*val *1000000000LL ; tmp =div_s64 (tmp, rescale->denominator);
@@ -50,7 +60,10 @@ int rescale_process_scale(struct rescale *rescale, int scale_type,if (!rem)return scale_type; - tmp =1 << *val2; +if (scale_type ==IIO_VAL_FRACTIONAL ) + tmp = *val2; +else + tmp =ULL (1 ) << *val2; rem2 = *val % (int )tmp; *val = *val / (int )tmp;
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 6/10 iio: test: add basic tests for the iio-rescale driver
In reply to Liam BeguinThe iio-rescale driver supports various combinations of scale types and offsets. These can often result in large integer multiplications. Make sure these calculations are done right by adding a set of kunit test cases that build on top of iio-test-format.
To run these tests, add the following to .kunitconfig
$ cat .kunitconfig CONFIG_IIO=y CONFIG_IIO_RESCALE_KUNIT_TEST=y CONFIG_KUNIT=y
Then run:
$ ./tools/testing/kunit/kunit.py run --kunitconfig .kunitconfig
--- drivers/iio/test/Kconfig | 10 + drivers/iio/test/Makefile | 1 + drivers/iio/test/iio-test-rescale.c | 710 ++++++++++++++++++++++++++++ 3 files changed, 721 insertions(+) create mode 100644 drivers/iio/test/iio-test-rescale.c
drivers/iio/test/Kconfig +10 -0
@@ -4,6 +4,16 @@ # # Keep in alphabetical order +config IIO_RESCALE_KUNIT_TEST + bool "Test IIO rescale conversion functions" + depends on KUNIT && !IIO_RESCALE + default KUNIT_ALL_TESTS + help + If you want to run tests on the iio-rescale code say Y here. + + This takes advantage of ARCH=um to run tests and should be used by + developers to tests their changes to the rescaling logic. + config IIO_TEST_FORMAT bool "Test IIO formatting functions" depends on KUNIT=y
drivers/iio/test/Makefile +1 -0
@@ -4,5 +4,6 @@ # # Keep in alphabetical order +obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN)
drivers/iio/test/iio-test-rescale.c new file +710 -0
710 lines not on this page · raw message
Signature · 1 line
2.35.1.4.g5d01301f2b86
kernel test robot
build botRe: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
Thank you for the patch! Yet something to improve:
Hi Liam,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on cd717ac6f69db4953ca701c6220c7cb58e17f35a]
url: https://github.com/0day-ci/linux/commits/Liam-Beguin/iio-afe-add-temperature-rescaling-support/20220213-105952 base: cd717ac6f69db4953ca701c6220c7cb58e17f35a config: microblaze-randconfig-r002-20220213 (https://download.01.org/0day-ci/archive/20220214/202202141701.Sk68w0Ft-lkp(a)intel.com/config) compiler: microblaze-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/757b647146492570add37dfe5839b90d87c74cf4
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Liam-Beguin/iio-afe-add-temperature-rescaling-support/20220213-105952 git checkout 757b647146492570add37dfe5839b90d87c74cf4
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=microblaze SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
microblaze-linux-ld: drivers/iio/test/iio-test-rescale.o: in function `iio_rescale_test_offset':
>> (.text+0x34): undefined reference to `kunit_kmalloc_array' >> microblaze-linux-ld: (.text+0x16c): undefined reference to `kunit_binary_assert_format' >> microblaze-linux-ld: (.text+0x1d4): undefined reference to `kunit_do_assertion' >> microblaze-linux-ld: (.text+0x1ec): undefined reference to `kunit_binary_str_assert_format'
microblaze-linux-ld: (.text+0x2e4): undefined reference to `kunit_do_assertion'
microblaze-linux-ld: drivers/iio/test/iio-test-rescale.o: in function `iio_rescale_test_scale':
(.text+0x478): undefined reference to `kunit_kmalloc_array'
microblaze-linux-ld: (.text+0x4b0): undefined reference to `kunit_binary_assert_format'
microblaze-linux-ld: (.text+0x608): undefined reference to `kunit_do_assertion'
microblaze-linux-ld: (.text+0x9ec): undefined reference to `kunit_do_assertion'
microblaze-linux-ld: (.text+0xaf0): undefined reference to `kunit_do_assertion'
microblaze-linux-ld: net/core/sock.o: in function `sk_destruct':
(.text+0x7810): undefined reference to `__sk_defer_free_flush'
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Re: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
In reply to Liam BeguinHi Liam,
Quoted 11 lines · Liam Beguin
The iio-rescale driver supports various combinations of scale types and offsets. These can often result in large integer multiplications. Make sure these calculations are done right by adding a set of kunit test cases that build on top of iio-test-format.
To run these tests, add the following to .kunitconfig
$ cat .kunitconfig CONFIG_IIO=y CONFIG_IIO_RESCALE_KUNIT_TEST=y CONFIG_KUNIT=y
Quoted 5 lines
Then run:
$ ./tools/testing/kunit/kunit.py run --kunitconfig .kunitconfigSigned-off-by Liam Beguin <[email protected]>Reviewed-by Peter Rosin <[email protected]>
Thanks for your patch, which is now commit 8e74a48d17d509bf ("iio: test: add basic tests for the iio-rescale driver") in v5.18.
drivers/iio/test/Kconfig line 8
Quoted 8 lines
drivers/iio/test/Kconfig +2
-0@@ -4,6 +4,16 @@ # # Keep in alphabetical order +config IIO_RESCALE_KUNIT_TEST + bool "Test IIO rescale conversion functions"
Is there any reason this cannot be tristate, so I can always enable this as a module, and run the test by loading the module whenever I want?
drivers/iio/test/Kconfig line 19
Quoted 11 lines
drivers/iio/test/Kconfig +8
-0+ depends on KUNIT && !IIO_RESCALE + default KUNIT_ALL_TESTS + help + If you want to run tests on the iio-rescale code say Y here. + + This takes advantage of ARCH=um to run tests and should be used by + developers to tests their changes to the rescaling logic. + config IIO_TEST_FORMAT bool "Test IIO formatting functions" depends on KUNIT=y
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Re: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
Hi Geert,
Quoted 14 lines · Geert Uytterhoeven
Hi Liam,
Quoted 11 lines · Liam Beguin
The iio-rescale driver supports various combinations of scale types and offsets. These can often result in large integer multiplications. Make sure these calculations are done right by adding a set of kunit test cases that build on top of iio-test-format.
To run these tests, add the following to .kunitconfig
$ cat .kunitconfig CONFIG_IIO=y CONFIG_IIO_RESCALE_KUNIT_TEST=y CONFIG_KUNIT=y
Quoted 8 lines
Quoted 5 lines
Then run:
$ ./tools/testing/kunit/kunit.py run --kunitconfig .kunitconfigSigned-off-by Liam Beguin <[email protected]>Reviewed-by Peter Rosin <[email protected]>Thanks for your patch, which is now commit
8e74a48d17d509bf("iio: test: add basic tests for the iio-rescale driver") in v5.18.
Thanks! I also recently sent a fix for this which recently made it upstream:7a2f6f61e8ee ("iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m")
Quoted 5 lines
Quoted 5 lines
drivers/iio/test/Kconfig +0
-0@@ -4,6 +4,16 @@ #
Quoted 7 lines
drivers/iio/test/Kconfig line 8
Quoted 3 lines
drivers/iio/test/Kconfig +2
-0# Keep in alphabetical order +config IIO_RESCALE_KUNIT_TEST + bool "Test IIO rescale conversion functions"Is there any reason this cannot be tristate, so I can always enable this as a module, and run the test by loading the module whenever I want?
I based this patch off of IIO_TEST_FORMAT, and also thought that Kunit tests had to be built-in to work with tools/testing/kunit/kunit.py
Looking at the Documentation again, it seems I was (partially?) wrong, kunit tests can be run as module, but manually.
I could give this a try and send a patch in the next few days.
Cheers,
Liam
Quoted 22 lines
drivers/iio/test/Kconfig line 19
Quoted 11 lines
drivers/iio/test/Kconfig +8
-0+ depends on KUNIT && !IIO_RESCALE + default KUNIT_ALL_TESTS + help + If you want to run tests on the iio-rescale code say Y here. + + This takes advantage of ARCH=um to run tests and should be used by + developers to tests their changes to the rescaling logic. + config IIO_TEST_FORMAT bool "Test IIO formatting functions" depends on KUNIT=yGr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH v15 7/10 iio: afe: rescale: add RTD temperature sensor support
In reply to Liam BeguinAn RTD (Resistance Temperature Detector) is a kind of temperature sensor used to get a linear voltage to temperature reading within a give range (usually 0 to 100 degrees Celsius). Common types of RTDs include PT100, PT500, and PT1000.
--- drivers/iio/afe/iio-rescale.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)
drivers/iio/afe/iio-rescale.c +48 -0
@@ -394,10 +394,52 @@ static int rescale_voltage_divider_props(struct device *dev,return 0 ; } +static int rescale_temp_sense_rtd_props (struct device *dev, +struct rescale *rescale) +{ +u32 factor; +u32 alpha; +u32 iexc; +u32 tmp; +int ret; +u32 r0; + + ret =device_property_read_u32 (dev,"excitation-current-microamp" , + &iexc); +if (ret) { +dev_err (dev,"failed to read excitation-current-microamp: %d\n" , + ret); +return ret; + } + + ret =device_property_read_u32 (dev,"alpha-ppm-per-celsius" , &alpha); +if (ret) { +dev_err (dev,"failed to read alpha-ppm-per-celsius: %d\n" , + ret); +return ret; + } + + ret =device_property_read_u32 (dev,"r-naught-ohms" , &r0); +if (ret) { +dev_err (dev,"failed to read r-naught-ohms: %d\n" , ret); +return ret; + } + + tmp = r0 * iexc * alpha /1000000 ; + factor =gcd (tmp,1000000 ); + rescale->numerator =1000000 / factor; + rescale->denominator = tmp / factor; + + rescale->offset =-1 * ((r0 * iexc) /1000 ); + +return 0 ; +} +enum rescale_variant {CURRENT_SENSE_AMPLIFIER ,CURRENT_SENSE_SHUNT ,VOLTAGE_DIVIDER , +TEMP_SENSE_RTD , };static const struct rescale_cfg rescale_cfg[] = {
@@ -413,6 +455,10 @@ static const struct rescale_cfg rescale_cfg[] = { .type = IIO_VOLTAGE, .props = rescale_voltage_divider_props, }, + [TEMP_SENSE_RTD] = { + .type = IIO_TEMP, + .props = rescale_temp_sense_rtd_props, + }, }; static const struct of_device_id rescale_match[] = {
@@ -422,6 +468,8 @@ static const struct of_device_id rescale_match[] = { .data = &rescale_cfg[CURRENT_SENSE_SHUNT], }, { .compatible = "voltage-divider", .data = &rescale_cfg[VOLTAGE_DIVIDER], }, + { .compatible = "temperature-sense-rtd", + .data = &rescale_cfg[TEMP_SENSE_RTD], }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, rescale_match);
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 8/10 iio: afe: rescale: add temperature transducers
In reply to Liam BeguinA temperature transducer is a device that converts a thermal quantity into any other physical quantity. This patch adds support for temperature to voltage (like the LTC2997) and temperature to current (like the AD590) linear transducers.
In both cases these are assumed to be connected to a voltage ADC.
--- drivers/iio/afe/iio-rescale.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
drivers/iio/afe/iio-rescale.c +32 -0
@@ -435,11 +435,37 @@ static int rescale_temp_sense_rtd_props(struct device *dev,return 0 ; } +static int rescale_temp_transducer_props (struct device *dev, +struct rescale *rescale) +{ +s32 offset =0 ; +s32 sense =1 ; +s32 alpha; +int ret; + +device_property_read_u32 (dev,"sense-offset-millicelsius" , &offset); +device_property_read_u32 (dev,"sense-resistor-ohms" , &sense); + ret =device_property_read_u32 (dev,"alpha-ppm-per-celsius" , &alpha); +if (ret) { +dev_err (dev,"failed to read alpha-ppm-per-celsius: %d\n" , ret); +return ret; + } + + rescale->numerator =1000000 ; + rescale->denominator = alpha * sense; + + rescale->offset =div_s64 ((s64 )offset * rescale->denominator, + rescale->numerator); + +return 0 ; +} +enum rescale_variant {CURRENT_SENSE_AMPLIFIER ,CURRENT_SENSE_SHUNT ,VOLTAGE_DIVIDER ,TEMP_SENSE_RTD , +TEMP_TRANSDUCER , };static const struct rescale_cfg rescale_cfg[] = {
@@ -459,6 +485,10 @@ static const struct rescale_cfg rescale_cfg[] = { .type = IIO_TEMP, .props = rescale_temp_sense_rtd_props, }, + [TEMP_TRANSDUCER] = { + .type = IIO_TEMP, + .props = rescale_temp_transducer_props, + }, }; static const struct of_device_id rescale_match[] = {
@@ -470,6 +500,8 @@ static const struct of_device_id rescale_match[] = { .data = &rescale_cfg[VOLTAGE_DIVIDER], }, { .compatible = "temperature-sense-rtd", .data = &rescale_cfg[TEMP_SENSE_RTD], }, + { .compatible = "temperature-transducer", + .data = &rescale_cfg[TEMP_TRANSDUCER], }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, rescale_match);
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 9/10 dt-bindings: iio: afe: add bindings for temperature-sense-rtd
In reply to Liam BeguinAn ADC is often used to measure other quantities indirectly. This binding describe one case, the measurement of a temperature through the voltage across an RTD resistor such as a PT1000.
--- .../iio/afe/temperature-sense-rtd.yaml | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml new file +101 -0
@@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Temperature Sense RTD + +maintainers: + - Liam Beguin <[email protected]> + +description: | + RTDs (Resistance Temperature Detectors) are a kind of temperature sensors + used to get a linear voltage to temperature reading within a give range + (usually 0 to 100 degrees Celsius). + + When an io-channel measures the output voltage across an RTD such as a + PT1000, the interesting measurement is almost always the corresponding + temperature, not the voltage output. This binding describes such a circuit. + + The general transfer function here is (using SI units) + + V = R(T) * iexc + R(T) = r0 * (1 + alpha * T) + T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc) + + The following circuit matches what's in the examples section. + + 5V0 + ----- + | + +---+----+ + | R 5k | + +---+----+ + | + V 1mA + | + +---- Vout + | + +---+----+ + | PT1000 | + +---+----+ + | + ----- + GND + +properties: + compatible: + const: temperature-sense-rtd + + io-channels: + maxItems: 1 + description: | + Channel node of a voltage io-channel. + + '#io-channel-cells': + const: 0 + + excitation-current-microamp: + description: The current fed through the RTD sensor. + + alpha-ppm-per-celsius: + description: | + alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear + approximation of the resistance versus temperature relationship + between 0 and 100 degrees Celsius. + + alpha = (R_100 - R_0) / (100 * R_0) + + Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and + R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees + Celsius. + + Pure platinum has an alpha of 3925. Industry standards such as IEC60751 + and ASTM E-1137 specify an alpha of 3850. + + r-naught-ohms: + description: | + Resistance of the sensor at 0 degrees Celsius. + Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000 + +additionalProperties: false +required: + - compatible + - io-channels + - excitation-current-microamp + - alpha-ppm-per-celsius + - r-naught-ohms + +examples: + - | + pt1000_1: temperature-sensor0 { + compatible = "temperature-sense-rtd"; + #io-channel-cells = <0>; + io-channels = <&temp_adc1 0>; + + excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */ + alpha-ppm-per-celsius = <3908>; + r-naught-ohms = <1000>; + }; +...
Signature · 1 line
2.35.1.4.g5d01301f2b86
PATCH v15 10/10 dt-bindings: iio: afe: add bindings for temperature transducers
In reply to Liam BeguinAn ADC is often used to measure other quantities indirectly. This binding describe one case, the measurement of a temperature through a temperature transducer (either voltage or current).
--- .../iio/afe/temperature-transducer.yaml | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml new file +114 -0
@@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Temperature Transducer + +maintainers: + - Liam Beguin <[email protected]> + +description: | + A temperature transducer is a device that converts a thermal quantity + into any other physical quantity. This binding applies to temperature to + voltage (like the LTC2997), and temperature to current (like the AD590) + linear transducers. + In both cases these are assumed to be connected to a voltage ADC. + + When an io-channel measures the output voltage of a temperature analog front + end such as a temperature transducer, the interesting measurement is almost + always the corresponding temperature, not the voltage output. This binding + describes such a circuit. + + The general transfer function here is (using SI units) + V(T) = Rsense * Isense(T) + T = (Isense(T) / alpha) + offset + T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha) + + When using a temperature to voltage transducer, Rsense is set to 1. + + The following circuits show a temperature to current and a temperature to + voltage transducer that can be used with this binding. + + VCC + ----- + | + +---+---+ + | AD590 | VCC + +---+---+ ----- + | | + V proportional to T +----+----+ + | D+ --+ | + +---- Vout | LTC2997 +--- Vout + | D- --+ | + +---+----+ +---------+ + | Rsense | | + +---+----+ ----- + | GND + ----- + GND + +properties: + compatible: + const: temperature-transducer + + io-channels: + maxItems: 1 + description: | + Channel node of a voltage io-channel. + + '#io-channel-cells': + const: 0 + + sense-offset-millicelsius: + description: | + Temperature offset. + This offset is commonly used to convert from Kelvins to degrees Celsius. + In that case, sense-offset-millicelsius would be set to <(-273150)>. + default: 0 + + sense-resistor-ohms: + description: | + The sense resistor. + By default sense-resistor-ohms cancels out the resistor making the + circuit behave like a temperature transducer. + default: 1 + + alpha-ppm-per-celsius: + description: | + Sometimes referred to as output gain, slope, or temperature coefficient. + + alpha is expressed in parts per million which can be micro-amps per + degrees Celsius or micro-volts per degrees Celsius. The is the main + characteristic of a temperature transducer and should be stated in the + datasheet. + +additionalProperties: false + +required: + - compatible + - io-channels + - alpha-ppm-per-celsius + +examples: + - | + ad950: temperature-sensor-0 { + compatible = "temperature-transducer"; + #io-channel-cells = <0>; + io-channels = <&temp_adc 3>; + + sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */ + sense-resistor-ohms = <8060>; + alpha-ppm-per-celsius = <1>; /* 1 uA/K */ + }; + - | + znq_tmp: temperature-sensor-1 { + compatible = "temperature-transducer"; + #io-channel-cells = <0>; + io-channels = <&temp_adc 2>; + + sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */ + alpha-ppm-per-celsius = <4000>; /* 4 mV/K */ + }; +...
Signature · 1 line
2.35.1.4.g5d01301f2b86
Quoted 11 lines · On Sat, 12 Feb 2022 21:57:29 -0500 Liam Beguin <[email protected]> wrote:
Jonathan, Peter, Andy,
This series focuses on adding temperature rescaling support to the IIO Analog Front End (AFE) driver.
The main changes to the AFE driver include an initial Kunit test suite, support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs and temperature transducer sensors.
Thanks for your time,
Liam
Hi Liam,
I was waiting for Andy to reply to this. Took a quick look back at what was outstanding and realised he had given a
for v13.
I'm assuming there wasn't a strong reason to drop that in the meantime and it's a simple omission / crossed emails issue.
As such,
Series applied to the togreg branch of iio.git and pushed out as testing to get some build coverage from 0-day.
Thanks,
Jonathan
Quoted 242 lines
Changes since v14:
- Revertunits.hchanges in favor of "raw" valuesChanges since v13:
- fix SI prefix inrescale_temp_sense_rtd_props()
- add comment explaining SI prefixes are sometimes used as mathematical multipliers with no particular physical meaning associated.Changes since v12:
- rebase on latest testing branch
- fix copyright holder in newly created header file
- add myself as a copyright holder of theiio-rescale.cdriver at Peter's suggestion
- fix undefined behavior on left-shift operationChanges since v11:
- update commits with my personal email since all this work was done on my own time
- apply Peter's Reviewed-by to my local tree
- fix use ofunits.h
- make use ofunits.hmore consistently iniio-rescale.cand in the tests
- fix #include ordering
- treat 04/16 as a fix. Move it, and add a Fixes: tag
- fix undefined behavior on left-shift operation
- add comment aboutfract_multwithiio_str_to_fixpoint()
- reword commit message for 14/16, based on Andy's commentsChanges since v10:
- apply Andy's suggestion for offset calculations
- make use ofunits.hmore consistentlyChanges since v9:
- make use oflinux/units.h
- reorder commits, fixfract_log2before merging fract
- keep fractional representation when not overflowingChanges since v8:
- reword comment
- fix erroneous 64-bit division
- optimize and use 32-bit divisions when values are know to not overflow
- keepIIO_VAL_FRACTIONALscale when possible, if not default to fixed point
- add test cases
- use nano precision in test cases
- simplify offset calculation inrtd_props()Changes since v7:
- dropgcd()logic inrescale_process_scale()
- usediv_s64()instead ofdo_div()for signed 64-bit divisions
- combineIIO_VAL_FRACTIONALandIIO_VAL_FRACTIONAL_LOG2scale cases
- switch toINT_PLUS_NANOwhen accuracy is lost with FRACTIONAL scales
- rework test logic to allow for small relative error
- rename test variables to align error output messagesChanges since v6:
- rework IIO_VAL_INT_PLUS_{NANO,MICRO} based on Peter's suggestion
- combine IIO_VAL_INT_PLUS_{NANO,MICRO} cases
- add test cases for negative IIO_VAL_INT_PLUS_{NANO,MICRO} corner cases
- force use of positive integers withgcd()
- reduce risk of integer overflow inIIO_VAL_FRACTIONAL_LOG2
- fix duplicate symbol build error
- apply Reviewed-byChanges since v5:
- addinclude/linux/iio/afe/rescale.h
- expose functions use to process scale and offset
- add basic iio-rescale kunit test cases
- fix integer overflow case
- improve precision forIIO_VAL_FRACTIONAL_LOG2Changes since v4:
- only usegcd()when necessary in overflow mitigation
- fix INT_PLUS_{MICRO,NANO} support
- apply Reviewed-by
- fix temperature-transducer bindingsChanges since v3:
- drop unnecessary fallthrough statements
- drop redundant local variables in some calculations
- fix s64 divisions on 32bit platforms by usingdo_div
- add comment describing iio-rescaler offset calculation
- drop unnecessaryMAINTAINERSentryChanges since v2:
- don't break implicit offset truncations
- make a best effort to get a valid value for fractional types
- drop return value change iniio_convert_raw_to_processed_unlocked()
- don't rely on processed value for offset calculation
- add INT_PLUS_{MICRO,NANO} support in iio-rescale
- revert generic implementation in favor of temperature-sense-rtd and temperature-transducer
- add separate section toMAINTAINERSfileChanges since v1:
- rebase on latest iiotestingbranch
- also apply consumer scale on integer channel scale types
- don't break implicit truncation in processed channel offset calculation
- drop temperature AFE flavors in favor of a simpler generic implementationLiam Beguin (10):
iio: afe: rescale: expose scale processing function
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: add offset support
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: reduce risk of integer overflow
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: add RTD temperature sensor support
iio: afe: rescale: add temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
dt-bindings: iio: afe: add bindings for temperature transducers.../iio/afe/temperature-sense-rtd.yaml | 101 +++ .../iio/afe/temperature-transducer.yaml | 114 +++ drivers/iio/afe/iio-rescale.c | 283 ++++++- drivers/iio/test/Kconfig | 10 + drivers/iio/test/Makefile | 1 + drivers/iio/test/iio-test-rescale.c | 710 ++++++++++++++++++ include/linux/iio/afe/rescale.h | 36 + 7 files changed, 1220 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml create mode 100644 drivers/iio/test/iio-test-rescale.c create mode 100644 include/linux/iio/afe/rescale.hRange-diff against v14:
-: ------------ > 1: ee26b0eeac65 iio: afe: rescale: expose scale processing function 1: a510097c83f1 ! 2: 78f9d37575a5 iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support@@ Commit message
Reviewed-by Peter Rosin <[email protected]>##
drivers/iio/afe/iio-rescale.c##
-@@
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
-+#include <linux/units.h>
-
- #include <linux/iio/afe/rescale.h>
- #include <linux/iio/consumer.h>
@@drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale, intscale_type,
int *val, int *val2)
{
@@drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+ returnscale_type;
+ caseIIO_VAL_INT_PLUS_NANO:
+ caseIIO_VAL_INT_PLUS_MICRO:
-+ mult =scale_type==IIO_VAL_INT_PLUS_NANO? GIGA : MEGA;
++ mult =scale_type==IIO_VAL_INT_PLUS_NANO? 1000000000L : 1000000L;
+
+ /*
+ * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val
2:8f2f2699a9b4! 3:5be82bd72453iio: afe: rescale: add offset support@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale + *val = div_s64(tmp, scale) + schan_off; + return IIO_VAL_INT; + case IIO_VAL_INT_PLUS_NANO: -+ tmp = (s64)rescale->offset * GIGA; -+ tmp2 = ((s64)scale * GIGA) + scale2; ++ tmp = (s64)rescale->offset * 1000000000LL; ++ tmp2 = ((s64)scale * 1000000000LL) + scale2; + *val = div64_s64(tmp, tmp2) + schan_off; + return IIO_VAL_INT; + case IIO_VAL_INT_PLUS_MICRO: -+ tmp = (s64)rescale->offset * MEGA; -+ tmp2 = ((s64)scale * MEGA) + scale2; ++ tmp = (s64)rescale->offset * 1000000LL; ++ tmp2 = ((s64)scale * 1000000LL) + scale2; + *val = div64_s64(tmp, tmp2) + schan_off; + return IIO_VAL_INT; + default: 3: 2efa970bad26 ! 4: 95ec184759f6 iio: afe: rescale: fix accuracy for small fractional scales @@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale + return IIO_VAL_INT_PLUS_NANO; case IIO_VAL_INT_PLUS_NANO: case IIO_VAL_INT_PLUS_MICRO: - mult = scale_type == IIO_VAL_INT_PLUS_NANO ? GIGA : MEGA; + mult = scale_type == IIO_VAL_INT_PLUS_NANO ? 1000000000L : 1000000L; 4: 201037c0ead8 = 5: 2e1d41ef69d9 iio: afe: rescale: reduce risk of integer overflow 5: a0037cc3ee90 < -: ------------ iio: afe: rescale: make use of units.h 6: f8d47728f482 ! 6: 0b6c029dea1d iio: test: add basic tests for the iio-rescale driver @@ drivers/iio/test/iio-test-rescale.c (new) + +#include <linux/gcd.h> +#include <linux/overflow.h> -+#include <linux/units.h> + +#include <linux/iio/afe/rescale.h> +#include <linux/iio/iio.h> @@ drivers/iio/test/iio-test-rescale.c (new) + if (tmp < 0) + tmp2 *= -1; + -+ *nano = (s64)tmp * GIGA + tmp2; ++ *nano = (s64)tmp * 1000000000UL + tmp2; + + return ret; +} @@ drivers/iio/test/iio-test-rescale.c (new) + return -EINVAL; + } + -+ err = MEGA * abs(exp - real); ++ err = 1000000UL * abs(exp - real); + + return (int)div64_u64(err, abs(exp)); +} 7: a04685586340 ! 7: 951ea44d0f5c iio: afe: rescale: add RTD temperature sensor support @@ drivers/iio/afe/iio-rescale.c: static int rescale_voltage_divider_props(struct d + return ret; + } + -+ tmp = r0 * iexc * alpha / MEGA; -+ factor = gcd(tmp, MEGA); -+ rescale->numerator = MEGA / factor; ++ tmp = r0 * iexc * alpha / 1000000; ++ factor = gcd(tmp, 1000000); ++ rescale->numerator = 1000000 / factor; + rescale->denominator = tmp / factor; + -+ rescale->offset = -1 * ((r0 * iexc) / KILO); ++ rescale->offset = -1 * ((r0 * iexc) / 1000); + + return 0; +} 8: e3b716aaee50 ! 8: 56516fdc67bf iio: afe: rescale: add temperature transducers @@ drivers/iio/afe/iio-rescale.c: static int rescale_temp_sense_rtd_props(struct de + return ret; + } + -+ rescale->numerator = MEGA; ++ rescale->numerator = 1000000; + rescale->denominator = alpha * sense; + + rescale->offset = div_s64((s64)offset * rescale->denominator, 9: 22ae1458eb8b = 9: 8c409050990b dt-bindings: iio: afe: add bindings for temperature-sense-rtd 10: 33825ad452d6 = 10: bb39296590f3 dt-bindings: iio: afe: add bindings for temperature transducersbase-commit:
cd717ac6f69db4953ca701c6220c7cb58e17f35a
Jonathan Cameron
maintainerQuoted 15 lines · On Sun, 27 Feb 2022 12:55:59 +0000 Jonathan Cameron <[email protected]> wrote:
Quoted 11 lines · On Sat, 12 Feb 2022 21:57:29 -0500 Liam Beguin <[email protected]> wrote:
Jonathan, Peter, Andy,
This series focuses on adding temperature rescaling support to the IIO Analog Front End (AFE) driver.
The main changes to the AFE driver include an initial Kunit test suite, support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs and temperature transducer sensors.
Thanks for your time,
Liam
Quoted 6 lines
Hi Liam,
I was waiting for Andy to reply to this. Took a quick look back at what was outstanding and realised he had given a
Reviewed-by Andy Shevchenko <[email protected]>for v13.
Actually given the units.h change is a perhaps non trivial perhaps that's why you dropped Andy's RB. I'll still apply the series, but it Andy confirms his view on that tag before I push this out as something I can't rebase I'll add it if appropriate.
Thanks,
Jonathan
Quoted 256 lines
I'm assuming there wasn't a strong reason to drop that in the meantime and it's a simple omission / crossed emails issue.
As such,
Series applied to the togreg branch of iio.git and pushed out as testing to get some build coverage from 0-day.
Thanks,
Jonathan
Quoted 242 lines
Changes since v14:
- Revertunits.hchanges in favor of "raw" valuesChanges since v13:
- fix SI prefix inrescale_temp_sense_rtd_props()
- add comment explaining SI prefixes are sometimes used as mathematical multipliers with no particular physical meaning associated.Changes since v12:
- rebase on latest testing branch
- fix copyright holder in newly created header file
- add myself as a copyright holder of theiio-rescale.cdriver at Peter's suggestion
- fix undefined behavior on left-shift operationChanges since v11:
- update commits with my personal email since all this work was done on my own time
- apply Peter's Reviewed-by to my local tree
- fix use ofunits.h
- make use ofunits.hmore consistently iniio-rescale.cand in the tests
- fix #include ordering
- treat 04/16 as a fix. Move it, and add a Fixes: tag
- fix undefined behavior on left-shift operation
- add comment aboutfract_multwithiio_str_to_fixpoint()
- reword commit message for 14/16, based on Andy's commentsChanges since v10:
- apply Andy's suggestion for offset calculations
- make use ofunits.hmore consistentlyChanges since v9:
- make use oflinux/units.h
- reorder commits, fixfract_log2before merging fract
- keep fractional representation when not overflowingChanges since v8:
- reword comment
- fix erroneous 64-bit division
- optimize and use 32-bit divisions when values are know to not overflow
- keepIIO_VAL_FRACTIONALscale when possible, if not default to fixed point
- add test cases
- use nano precision in test cases
- simplify offset calculation inrtd_props()Changes since v7:
- dropgcd()logic inrescale_process_scale()
- usediv_s64()instead ofdo_div()for signed 64-bit divisions
- combineIIO_VAL_FRACTIONALandIIO_VAL_FRACTIONAL_LOG2scale cases
- switch toINT_PLUS_NANOwhen accuracy is lost with FRACTIONAL scales
- rework test logic to allow for small relative error
- rename test variables to align error output messagesChanges since v6:
- rework IIO_VAL_INT_PLUS_{NANO,MICRO} based on Peter's suggestion
- combine IIO_VAL_INT_PLUS_{NANO,MICRO} cases
- add test cases for negative IIO_VAL_INT_PLUS_{NANO,MICRO} corner cases
- force use of positive integers withgcd()
- reduce risk of integer overflow inIIO_VAL_FRACTIONAL_LOG2
- fix duplicate symbol build error
- apply Reviewed-byChanges since v5:
- addinclude/linux/iio/afe/rescale.h
- expose functions use to process scale and offset
- add basic iio-rescale kunit test cases
- fix integer overflow case
- improve precision forIIO_VAL_FRACTIONAL_LOG2Changes since v4:
- only usegcd()when necessary in overflow mitigation
- fix INT_PLUS_{MICRO,NANO} support
- apply Reviewed-by
- fix temperature-transducer bindingsChanges since v3:
- drop unnecessary fallthrough statements
- drop redundant local variables in some calculations
- fix s64 divisions on 32bit platforms by usingdo_div
- add comment describing iio-rescaler offset calculation
- drop unnecessaryMAINTAINERSentryChanges since v2:
- don't break implicit offset truncations
- make a best effort to get a valid value for fractional types
- drop return value change iniio_convert_raw_to_processed_unlocked()
- don't rely on processed value for offset calculation
- add INT_PLUS_{MICRO,NANO} support in iio-rescale
- revert generic implementation in favor of temperature-sense-rtd and temperature-transducer
- add separate section toMAINTAINERSfileChanges since v1:
- rebase on latest iiotestingbranch
- also apply consumer scale on integer channel scale types
- don't break implicit truncation in processed channel offset calculation
- drop temperature AFE flavors in favor of a simpler generic implementationLiam Beguin (10):
iio: afe: rescale: expose scale processing function
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: add offset support
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: reduce risk of integer overflow
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: add RTD temperature sensor support
iio: afe: rescale: add temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
dt-bindings: iio: afe: add bindings for temperature transducers.../iio/afe/temperature-sense-rtd.yaml | 101 +++ .../iio/afe/temperature-transducer.yaml | 114 +++ drivers/iio/afe/iio-rescale.c | 283 ++++++- drivers/iio/test/Kconfig | 10 + drivers/iio/test/Makefile | 1 + drivers/iio/test/iio-test-rescale.c | 710 ++++++++++++++++++ include/linux/iio/afe/rescale.h | 36 + 7 files changed, 1220 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml create mode 100644 Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml create mode 100644 drivers/iio/test/iio-test-rescale.c create mode 100644 include/linux/iio/afe/rescale.hRange-diff against v14:
-: ------------ > 1: ee26b0eeac65 iio: afe: rescale: expose scale processing function 1: a510097c83f1 ! 2: 78f9d37575a5 iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support@@ Commit message
Reviewed-by Peter Rosin <[email protected]>##
drivers/iio/afe/iio-rescale.c##
-@@
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
-+#include <linux/units.h>
-
- #include <linux/iio/afe/rescale.h>
- #include <linux/iio/consumer.h>
@@drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale, intscale_type,
int *val, int *val2)
{
@@drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale
+ returnscale_type;
+ caseIIO_VAL_INT_PLUS_NANO:
+ caseIIO_VAL_INT_PLUS_MICRO:
-+ mult =scale_type==IIO_VAL_INT_PLUS_NANO? GIGA : MEGA;
++ mult =scale_type==IIO_VAL_INT_PLUS_NANO? 1000000000L : 1000000L;
+
+ /*
+ * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val
2:8f2f2699a9b4! 3:5be82bd72453iio: afe: rescale: add offset support@@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale + *val = div_s64(tmp, scale) + schan_off; + return IIO_VAL_INT; + case IIO_VAL_INT_PLUS_NANO: -+ tmp = (s64)rescale->offset * GIGA; -+ tmp2 = ((s64)scale * GIGA) + scale2; ++ tmp = (s64)rescale->offset * 1000000000LL; ++ tmp2 = ((s64)scale * 1000000000LL) + scale2; + *val = div64_s64(tmp, tmp2) + schan_off; + return IIO_VAL_INT; + case IIO_VAL_INT_PLUS_MICRO: -+ tmp = (s64)rescale->offset * MEGA; -+ tmp2 = ((s64)scale * MEGA) + scale2; ++ tmp = (s64)rescale->offset * 1000000LL; ++ tmp2 = ((s64)scale * 1000000LL) + scale2; + *val = div64_s64(tmp, tmp2) + schan_off; + return IIO_VAL_INT; + default: 3: 2efa970bad26 ! 4: 95ec184759f6 iio: afe: rescale: fix accuracy for small fractional scales @@ drivers/iio/afe/iio-rescale.c: int rescale_process_scale(struct rescale *rescale + return IIO_VAL_INT_PLUS_NANO; case IIO_VAL_INT_PLUS_NANO: case IIO_VAL_INT_PLUS_MICRO: - mult = scale_type == IIO_VAL_INT_PLUS_NANO ? GIGA : MEGA; + mult = scale_type == IIO_VAL_INT_PLUS_NANO ? 1000000000L : 1000000L; 4: 201037c0ead8 = 5: 2e1d41ef69d9 iio: afe: rescale: reduce risk of integer overflow 5: a0037cc3ee90 < -: ------------ iio: afe: rescale: make use of units.h 6: f8d47728f482 ! 6: 0b6c029dea1d iio: test: add basic tests for the iio-rescale driver @@ drivers/iio/test/iio-test-rescale.c (new) + +#include <linux/gcd.h> +#include <linux/overflow.h> -+#include <linux/units.h> + +#include <linux/iio/afe/rescale.h> +#include <linux/iio/iio.h> @@ drivers/iio/test/iio-test-rescale.c (new) + if (tmp < 0) + tmp2 *= -1; + -+ *nano = (s64)tmp * GIGA + tmp2; ++ *nano = (s64)tmp * 1000000000UL + tmp2; + + return ret; +} @@ drivers/iio/test/iio-test-rescale.c (new) + return -EINVAL; + } + -+ err = MEGA * abs(exp - real); ++ err = 1000000UL * abs(exp - real); + + return (int)div64_u64(err, abs(exp)); +} 7: a04685586340 ! 7: 951ea44d0f5c iio: afe: rescale: add RTD temperature sensor support @@ drivers/iio/afe/iio-rescale.c: static int rescale_voltage_divider_props(struct d + return ret; + } + -+ tmp = r0 * iexc * alpha / MEGA; -+ factor = gcd(tmp, MEGA); -+ rescale->numerator = MEGA / factor; ++ tmp = r0 * iexc * alpha / 1000000; ++ factor = gcd(tmp, 1000000); ++ rescale->numerator = 1000000 / factor; + rescale->denominator = tmp / factor; + -+ rescale->offset = -1 * ((r0 * iexc) / KILO); ++ rescale->offset = -1 * ((r0 * iexc) / 1000); + + return 0; +} 8: e3b716aaee50 ! 8: 56516fdc67bf iio: afe: rescale: add temperature transducers @@ drivers/iio/afe/iio-rescale.c: static int rescale_temp_sense_rtd_props(struct de + return ret; + } + -+ rescale->numerator = MEGA; ++ rescale->numerator = 1000000; + rescale->denominator = alpha * sense; + + rescale->offset = div_s64((s64)offset * rescale->denominator, 9: 22ae1458eb8b = 9: 8c409050990b dt-bindings: iio: afe: add bindings for temperature-sense-rtd 10: 33825ad452d6 = 10: bb39296590f3 dt-bindings: iio: afe: add bindings for temperature transducersbase-commit:
cd717ac6f69db4953ca701c6220c7cb58e17f35a
Quoted 13 lines · Jonathan Cameron
Quoted 11 lines · On Sun, 27 Feb 2022 12:55:59 +0000 Jonathan Cameron <[email protected]> wrote:
Quoted 8 lines · On Sat, 12 Feb 2022 21:57:29 -0500 Liam Beguin <[email protected]> wrote:
Jonathan, Peter, Andy,
This series focuses on adding temperature rescaling support to the IIO Analog Front End (AFE) driver.
The main changes to the AFE driver include an initial Kunit test suite, support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs and temperature transducer sensors.
...
Quoted 9 lines
Quoted 4 lines
I was waiting for Andy to reply to this. Took a quick look back at what was outstanding and realised he had given a
Reviewed-by Andy Shevchenko <[email protected]>for v13.
Actually given the
units.hchange is a perhaps non trivial perhaps that's why you dropped Andy's RB. I'll still apply the series, but it Andy confirms his view on that tag before I push this out as something I can't rebase I'll add it if appropriate.
Since it was a separate patch, I'm fine with not including it due to strong argument from Peter.
Quoted 7 lines
Quoted 7 lines
I'm assuming there wasn't a strong reason to drop that in the meantime and it's a simple omission / crossed emails issue.
As such,
Series applied to the togreg branch of iio.git and pushed out as testing to get some build coverage from 0-day.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerQuoted 22 lines · On Sun, 27 Feb 2022 15:25:50 +0200 Andy Shevchenko <[email protected]>…
Quoted 13 lines · Jonathan Cameron
Quoted 11 lines · On Sun, 27 Feb 2022 12:55:59 +0000 Jonathan Cameron <[email protected]> wrote:
Quoted 8 lines · On Sat, 12 Feb 2022 21:57:29 -0500 Liam Beguin <[email protected]> wrote:
Jonathan, Peter, Andy,
This series focuses on adding temperature rescaling support to the IIO Analog Front End (AFE) driver.
The main changes to the AFE driver include an initial Kunit test suite, support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs and temperature transducer sensors.
...
Quoted 5 lines
Quoted 4 lines
I was waiting for Andy to reply to this. Took a quick look back at what was outstanding and realised he had given a
Reviewed-by Andy Shevchenko <[email protected]>for v13.
Quoted 7 lines
Quoted 4 lines
Actually given the
units.hchange is a perhaps non trivial perhaps that's why you dropped Andy's RB. I'll still apply the series, but it Andy confirms his view on that tag before I push this out as something I can't rebase I'll add it if appropriate.Since it was a separate patch, I'm fine with not including it due to strong argument from Peter.
Thanks. I've added your Rb and pushed out a fresh testing branch.
Jonathan
Quoted 10 lines
Quoted 8 lines
Quoted 8 lines
I'm assuming there wasn't a strong reason to drop that in the meantime and it's a simple omission / crossed emails issue.
As such,
Series applied to the togreg branch of iio.git and pushed out as testing to get some build coverage from 0-day.
Hi Jonathan,
Quoted 22 lines · Jonathan Cameron
Quoted 11 lines · On Sat, 12 Feb 2022 21:57:29 -0500 Liam Beguin <[email protected]> wrote:
Jonathan, Peter, Andy,
This series focuses on adding temperature rescaling support to the IIO Analog Front End (AFE) driver.
The main changes to the AFE driver include an initial Kunit test suite, support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs and temperature transducer sensors.
Thanks for your time,
LiamHi Liam,
I was waiting for Andy to reply to this. Took a quick look back at what was outstanding and realised he had given a
Reviewed-by Andy Shevchenko <[email protected]>for v13.
Quoted 7 lines
I'm assuming there wasn't a strong reason to drop that in the meantime and it's a simple omission / crossed emails issue.
As such,
Series applied to the togreg branch of iio.git and pushed out as testing to get some build coverage from 0-day.
Great news! Thanks again for your patience, and review on this work.
I noticed you fixed the CI error. Thanks for doing that, and my apologies for missing it.
Cheers,
Liam
Quoted 4 lines
Thanks,
Jonathan