Skip to contentSkip to conversation

dt-bindings: mfd: brcm,cru: rename pinctrl node

PATCH Applied Rafał Miłecki 3 participants 3 messages Feb 16, 2022 – Mar 7, 2022

Subsystems (2)
Device tree bindings Multifunction devices (MFD)
lore
Share & tools
lore

Rafał Miłecki

author
#0 lore raw

PATCH 1/1 dt-bindings: mfd: brcm,cru: rename pinctrl node

From: Rafał Miłecki <[email protected]>

This matches pinctrl.yaml requirement and fixes:

Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

Signed-off-by Rafał Miłecki <[email protected]>
---
 Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/mfd/brcm,cru.yaml +2 -2
index be4a2df71c25..b85819fbb07c 100644
@@ -39,7 +39,7 @@ patternProperties:
   '^phy@[a-f0-9]+$':
     $ref: ../phy/bcm-ns-usb2-phy.yaml
 
-  '^pin-controller@[a-f0-9]+$':
+  '^pinctrl@[a-f0-9]+$':
     $ref: ../pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':

@@ -94,7 +94,7 @@ examples:
             reg = <0x180 0x4>;
         };
 
-        pin-controller@1c0 {
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";
Signature · 1 line
2.34.1
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 4 lines · Rafał Miłecki

From: Rafał Miłecki <[email protected]>

This matches pinctrl.yaml requirement and fixes:

Quoted 8 lines

Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

Signed-off-by Rafał Miłecki <[email protected]>
---
 Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by Rob Herring <[email protected]>
Applied
#2 lore raw
In reply to Rafał Miłecki
Quoted 11 lines · Rafał Miłecki

From: Rafał Miłecki <[email protected]>

This matches pinctrl.yaml requirement and fixes:

Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

Signed-off-by Rafał Miłecki <[email protected]>
---
 Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog