kontron-sl-mx8mm: change environment address variables
PATCH v2 1/1 kontron-sl-mx8mm: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value.
The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h".
The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have the same value as for the kernel_addr_r.
--- configs/kontron-sl-mx8mm_defconfig | 2 +- include/configs/kontron-sl-mx8mm.h | 15 ++++++++++----- 2 files changed, 11 insertions(+), 6 deletions(-)
configs/kontron-sl-mx8mm_defconfig +1 -1
@@ -20,7 +20,7 @@ CONFIG_SPL_SERIAL=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y
include/configs/kontron-sl-mx8mm.h +10 -5
@@ -67,15 +67,20 @@#define FEC_QUIRK_ENET_MAC -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define ENV_MEM_LAYOUT_SETTINGS \ + "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=0x42000000\0" \ - "fdt_addr_r=0x44000000\0" \ - "ramdisk_addr_r=0x46400000\0" \ - "pxefile_addr_r=0x46000000\0" \ - "scriptaddr=0x46000000\0" \ + "fdt_addr_r=0x48000000\0" \ + "fdtoverlay_addr_r=0x49000000\0" \ + "ramdisk_addr_r=0x48080000\0" \ + "scriptaddr=0x40000000\0"\ + "pxefile_addr_r=0x40100000\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ "dfu_alt_info=sf 0:0=flash-bin raw 0x400 0x1f0000\0" \ "bootdelay=3\0" \ "hostname=" CONFIG_HOSTNAME "\0" \ + ENV_MEM_LAYOUT_SETTINGS \ BOOTENV#endif /* __KONTRON_MX8MM_CONFIG_H */
Signature · 1 line
2.30.2
PATCH 1/1 kontron-pitx-imx8m: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value.
The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h".
The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have the same value as for the kernel_addr_r.
--- configs/kontron_pitx_imx8m_defconfig | 2 +- include/configs/kontron_pitx_imx8m.h | 13 +++++++------ 2 files changed, 8 insertions(+), 7 deletions(-)
configs/kontron_pitx_imx8m_defconfig +1 -1
@@ -20,7 +20,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_FIT=y CONFIG_SPL_FIT_PRINT=y CONFIG_SPL_LOAD_FIT=y
include/configs/kontron_pitx_imx8m.h +7 -6
@@ -49,12 +49,13 @@#endif #define ENV_MEM_LAYOUT_SETTINGS \ - "kernel_addr_r=0x40880000\0" \ - "fdt_addr_r=0x43000000\0" \ - "scriptaddr=0x43500000\0" \ - "initrd_addr=0x43800000\0" \ - "pxefile_addr_r=0x43500000\0" \ - "bootm_size=0x10000000\0" \ + "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "kernel_addr_r=0x42000000\0" \ + "fdt_addr_r=0x48000000\0" \ + "fdtoverlay_addr_r=0x49000000\0" \ + "ramdisk_addr_r=0x48080000\0" \ + "scriptaddr=0x40000000\0" \ + "pxefile_addr_r=0x40100000\0"#define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 0) \
Signature · 1 line
2.30.2
PATCH 1/1 kontron-pitx-imx8m: change environment address variables
Quoted 8 lines
Currently the space between
kernel_addr_rand thefdt_addr_ris only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value.
The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h".
TheCONFIG_SYS_LOAD_ADDRvalue is set to0x42000000. With that we have the same value as for thekernel_addr_r.Signed-off-by Heiko Thiery <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v2 1/1 kontron-sl-mx8mm: change environment address variables
In reply to Heiko ThieryQuoted 9 lines
Currently the space between
kernel_addr_rand thefdt_addr_ris only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value.
The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h".
TheCONFIG_SYS_LOAD_ADDRvalue is set to0x42000000. With that we have the same value as for thekernel_addr_r.Signed-off-by Heiko Thiery <[email protected]>Reviewed-by Michael Walle <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================