imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Subsystems (9)
v3 cover imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.
This patchset also adds support for NXP TJA11xx Ethernet PHYs.
Changes in v3:
* Added nxp-c45-tja11xx driver.
* Added ethernet support to iMX8MN BSH SMM S2 boards.
Changes in v2:
* Properly added MAINTAINERS entry.
* Fixed binman configuration.
* Picked device tree from kernel.
* Removed CONFIG_SPL_BUILD anti-pattern in board config.
* Removed downstream stuff in bootargs.
* Added board documentation.
Ariel D'Alessandro (4):
phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
iopoll: Extend read_poll_timeout macro to support variable parameters
net: phy: Add phy_modify() accessor
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Michael Trimarchi (2):
imx8m: add regs used by GPMI
net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver
arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi | 423 ++++++++ .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 225 +++++ arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2.dts | 48 + arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2pro.dts | 80 ++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 7 + arch/arm/mach-imx/imx8m/Kconfig | 15 + arch/arm/mach-socfpga/reset_manager_s10.c | 20 +- board/bsh/imx8mn_smm_s2/Kconfig | 49 + board/bsh/imx8mn_smm_s2/MAINTAINERS | 8 + board/bsh/imx8mn_smm_s2/Makefile | 13 + board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c | 23 + board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg | 10 + board/bsh/imx8mn_smm_s2/spl.c | 93 ++ configs/imx8mn_bsh_smm_s2_defconfig | 97 ++ configs/imx8mn_bsh_smm_s2pro_defconfig | 94 ++ doc/board/bsh/imx8mn_bsh_smm_s2.rst | 62 ++ doc/board/bsh/index.rst | 9 + doc/board/index.rst | 1 + drivers/mmc/rockchip_sdhci.c | 9 +- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-c45-tja11xx.c | 6 +- drivers/net/phy/nxp-tja11xx.c | 277 ++++++ drivers/net/phy/phy.c | 23 + include/configs/imx8mn_bsh_smm_s2.h | 52 + include/configs/imx8mn_bsh_smm_s2_common.h | 62 ++ include/configs/imx8mn_bsh_smm_s2pro.h | 35 + include/linux/iopoll.h | 12 +- include/phy.h | 3 + 34 files changed, 3654 insertions(+), 22 deletions(-) create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS create mode 100644 board/bsh/imx8mn_smm_s2/Makefile create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg create mode 100644 board/bsh/imx8mn_smm_s2/spl.c create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst create mode 100644 doc/board/bsh/index.rst create mode 100644 drivers/net/phy/nxp-tja11xx.c create mode 100644 include/configs/imx8mn_bsh_smm_s2.h create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h
Signature · 1 line
2.34.1
PATCH v3 1/6 imx8m: add regs used by GPMI
From: Michael Trimarchi <[email protected]>
Add regs used by GPMI
--- arch/arm/include/asm/arch-imx8m/imx-regs.h | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/include/asm/arch-imx8m/imx-regs.h +7 -0
@@ -58,6 +58,13 @@#define SRC_DDRC_RCR_ADDR 0x30391000#define SRC_DDRC2_RCR_ADDR 0x30391004 +#define APBH_DMA_ARB_BASE_ADDR 0x33000000 +#define APBH_DMA_ARB_END_ADDR 0x33007FFF +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR + +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) +#define DDRC_DDR_SS_GPR0 0x3d000000#define DDRC_IPS_BASE_ADDR (X ) (0x3d400000 + ((X) * 0x2000000))#define DDR_CSD1_BASE_ADDR 0x40000000
Signature · 1 line
2.34.1
PATCH v3 2/6 phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
In reply to Ariel D'AlessandroThis driver supports NXP C45 TJA11XX PHYs, but there're also other NXP TJA11XX PHYs. Let's rename functions in this driver to be c45 variant specific, so further drivers can be introduced adding support for NXP TJA11XX PHYs.
--- drivers/net/phy/nxp-c45-tja11xx.c | 6 +++--- drivers/net/phy/phy.c | 2 +- include/phy.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/net/phy/nxp-c45-tja11xx.c +3 -3
@@ -330,7 +330,7 @@ static int nxp_c45_probe(struct phy_device *phydev)return 0 ; } -static struct phy_driver nxp_tja11xx = { +static struct phy_driver nxp_c45_tja11xx = { .name ="NXP C45 TJA1103" , .uid =PHY_ID_TJA_1103 , .mask =0xfffff0 ,
@@ -341,8 +341,8 @@ static struct phy_driver nxp_tja11xx = { .shutdown = &genphy_shutdown, }; -int phy_nxp_tja11xx_init (void ) +int phy_nxp_c45_tja11xx_init (void ) { -phy_register (&nxp_tja11xx); +phy_register (&nxp_c45_tja11xx);return 0 ; }
drivers/net/phy/phy.c +1 -1
@@ -530,7 +530,7 @@ int phy_init(void)phy_natsemi_init ();#endif #ifdef CONFIG_NXP_C45_TJA11XX_PHY -phy_nxp_tja11xx_init (); +phy_nxp_c45_tja11xx_init ();#endif #ifdef CONFIG_PHY_REALTEK phy_realtek_init ();
include/phy.h +1 -1
@@ -527,7 +527,7 @@ int phy_micrel_ksz8xxx_init(void);int phy_micrel_ksz90x1_init (void );int phy_meson_gxl_init (void );int phy_natsemi_init (void ); -int phy_nxp_tja11xx_init (void ); +int phy_nxp_c45_tja11xx_init (void );int phy_realtek_init (void );int phy_smsc_init (void );int phy_teranetics_init (void );
Signature · 1 line
2.34.1
PATCH v3 3/6 iopoll: Extend read_poll_timeout macro to support variable parameters
In reply to Ariel D'AlessandroThis macro currently supports only one parameter. Based on Linux iopoll, let's extend read_poll_timeout common API to allow multiple variable parameters.
--- arch/arm/mach-socfpga/reset_manager_s10.c | 20 +++++++++++--------- drivers/mmc/rockchip_sdhci.c | 9 +++++---- include/linux/iopoll.h | 12 ++++++------ 3 files changed, 22 insertions(+), 19 deletions(-)
arch/arm/mach-socfpga/reset_manager_s10.c +11 -9
@@ -80,9 +80,9 @@ void socfpga_bridges_reset(int enable) ~0);/* Poll until all idleack to 0 */ -read_poll_timeout (readl,socfpga_get_sysmgr_addr () + -SYSMGR_SOC64_NOC_IDLEACK , reg, !reg,1000 , -300000 ); +read_poll_timeout (readl, reg, !reg,1000 ,300000 , +socfpga_get_sysmgr_addr () + +SYSMGR_SOC64_NOC_IDLEACK ); }else {/* set idle request to all bridges */ writel(~0,
@@ -93,18 +93,20 @@ void socfpga_bridges_reset(int enable)writel (1 ,socfpga_get_sysmgr_addr () +SYSMGR_SOC64_NOC_TIMEOUT );/* Poll until all idleack to 1 */ -read_poll_timeout (readl,socfpga_get_sysmgr_addr () + -SYSMGR_SOC64_NOC_IDLEACK , reg, +read_poll_timeout (readl, reg, reg == (SYSMGR_NOC_H2F_MSK |SYSMGR_NOC_LWH2F_MSK ), -1000 ,300000 ); +1000 ,300000 , +socfpga_get_sysmgr_addr () + +SYSMGR_SOC64_NOC_IDLEACK );/* Poll until all idlestatus to 1 */ -read_poll_timeout (readl,socfpga_get_sysmgr_addr () + -SYSMGR_SOC64_NOC_IDLESTATUS , reg, +read_poll_timeout (readl, reg, reg == (SYSMGR_NOC_H2F_MSK |SYSMGR_NOC_LWH2F_MSK ), -1000 ,300000 ); +1000 ,300000 , +socfpga_get_sysmgr_addr () + +SYSMGR_SOC64_NOC_IDLESTATUS );/* Reset all bridges (except NOR DDR scheduler & F2S) */ setbits_le32(socfpga_get_rstmgr_addr() + RSTMGR_SOC64_BRGMODRST,
drivers/mmc/rockchip_sdhci.c +5 -4
@@ -146,8 +146,8 @@ static void rk3399_emmc_phy_power_on(struct rockchip_emmc_phy *phy, u32 clock)/* REN Enable on STRB Line for HS400 */ writel (RK_CLRSETBITS (0 ,1 <<9 ), &phy->emmcphy_con[2 ]); -read_poll_timeout (readl, &phy->emmcphy_status, dllrdy, -PHYCTRL_DLL_LOCK_WO_TMOUT (dllrdy),1 ,5000 ); +read_poll_timeout (readl, dllrdy,PHYCTRL_DLL_LOCK_WO_TMOUT (dllrdy),1 , +5000 , &phy->emmcphy_status); }static void rk3399_emmc_phy_power_off (struct rockchip_emmc_phy *phy)
@@ -235,8 +235,9 @@ static int rk3568_sdhci_emmc_set_clock(struct sdhci_host *host, unsigned int cloDWCMSHC_EMMC_DLL_START ;sdhci_writel (host, extra,DWCMSHC_EMMC_DLL_CTRL ); - ret =read_poll_timeout (readl, host->ioaddr +DWCMSHC_EMMC_DLL_STATUS0 , - val,DLL_LOCK_WO_TMOUT (val),1 ,500 ); + ret =read_poll_timeout (readl, val,DLL_LOCK_WO_TMOUT (val),1 , +500 , + host->ioaddr +DWCMSHC_EMMC_DLL_STATUS0 );if (ret)return ret;
include/linux/iopoll.h +6 -6
@@ -14,11 +14,11 @@/** * read_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs * @op: accessor function (takes @addr as its only argument) -* @addr: Address to poll * @val: Variable to read the value into * @cond: Break condition (usually involving @val) * @sleep_us: Maximum time to sleep in us * @timeout_us: Timeout in us, 0 means never timeout +* @args: arguments for @op poll * * Returns 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @addr is stored in @val.
@@ -26,15 +26,15 @@* When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. */ -#define read_poll_timeout (op, addr, val, cond, sleep_us, timeout_us) \ +#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, args...) \ ({ \ unsigned long timeout = timer_get_us() + timeout_us; \ for (;;) { \ - (val) = op(addr); \ + (val) = op(args); \ if (cond) \ break; \ if (timeout_us && time_after(timer_get_us(), timeout)) { \ - (val) = op(addr); \ + (val) = op(args); \ break; \ } \ if (sleep_us) \
@@ -44,13 +44,13 @@ })#define readx_poll_sleep_timeout (op, addr, val, cond, sleep_us, timeout_us) \ - read_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) + read_poll_timeout(op, val, cond, sleep_us, timeout_us, addr)#define readl_poll_sleep_timeout (addr, val, cond, sleep_us, timeout_us) \ readx_poll_sleep_timeout(readl, addr, val, cond, sleep_us, timeout_us)#define readx_poll_timeout (op, addr, val, cond, timeout_us) \ - read_poll_timeout(op, addr, val, cond, false, timeout_us) + read_poll_timeout(op, val, cond, false, timeout_us, addr)#define readb_poll_timeout (addr, val, cond, timeout_us) \ readx_poll_timeout(readb, addr, val, cond, timeout_us)
Signature · 1 line
2.34.1
PATCH v3 4/6 net: phy: Add phy_modify() accessor
In reply to Ariel D'AlessandroAdd read-modify-write unlocked accessor for accessing a PHY register.
--- drivers/net/phy/phy.c | 20 ++++++++++++++++++++ include/phy.h | 2 ++ 2 files changed, 22 insertions(+)
drivers/net/phy/phy.c +20 -0
@@ -1105,3 +1105,23 @@ int phy_get_interface_by_name(const char *str)return -1 ; } + +/** +* phy_modify - Convenience function for modifying a given PHY register +* @phydev: the phy_device struct +* @devad: The MMD to read from +* @regnum: register number to write +* @mask: bit mask of bits to clear +* @set: new value of bits set in mask to write to @regnum +*/ +int phy_modify (struct phy_device *phydev,int devad,int regnum,u16 mask, +u16 set) +{ +int ret; + + ret =phy_read (phydev, devad, regnum); +if (ret <0 ) +return ret; + +return phy_write (phydev, devad, regnum, (ret & ~mask) | set); +}
include/phy.h +2 -0
@@ -500,6 +500,8 @@ int phy_config(struct phy_device *phydev);int phy_shutdown (struct phy_device *phydev);int phy_register (struct phy_driver *drv);int phy_set_supported (struct phy_device *phydev,u32 max_speed); +int phy_modify (struct phy_device *phydev,int devad,int regnum,u16 mask, +u16 set);int genphy_config_aneg (struct phy_device *phydev);int genphy_restart_aneg (struct phy_device *phydev);int genphy_update_link (struct phy_device *phydev);
Signature · 1 line
2.34.1
Re: [PATCH v3 4/6] net: phy: Add phy_modify() accessor
Quoted 51 lines · Ariel D'Alessandro
Add read-modify-write unlocked accessor for accessing a PHY register.
Signed-off-by Ariel D'Alessandro <[email protected]>--- drivers/net/phy/phy.c | 20 ++++++++++++++++++++ include/phy.h | 2 ++ 2 files changed, 22 insertions(+)drivers/net/phy/phy.c +20
-0@@ -1105,3 +1105,23 @@ int phy_get_interface_by_name(const char *str)return -1 ; } + +/** +* phy_modify - Convenience function for modifying a given PHY register +* @phydev: the phy_device struct +* @devad: The MMD to read from +* @regnum: register number to write +* @mask: bit mask of bits to clear +* @set: new value of bits set in mask to write to @regnum +*/ +int phy_modify (struct phy_device *phydev,int devad,int regnum,u16 mask, +u16 set) +{ +int ret; + + ret =phy_read (phydev, devad, regnum); +if (ret <0 ) +return ret; + +return phy_write (phydev, devad, regnum, (ret & ~mask) | set); +}include/phy.h +2
-1@@ -500,6 +500,8 @@ int phy_config(struct phy_device *phydev);int phy_shutdown (struct phy_device *phydev);int phy_register (struct phy_driver *drv);int phy_set_supported (struct phy_device *phydev,u32 max_speed); +int phy_modify (struct phy_device *phydev,int devad,int regnum,u16 mask, +u16 set);int genphy_config_aneg (struct phy_device *phydev);int genphy_restart_aneg (struct phy_device *phydev);int genphy_update_link (struct phy_device *phydev); --
Quoted 2 lines
2.34.1
PATCH v3 5/6 net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver
In reply to Ariel D'AlessandroFrom: Michael Trimarchi <[email protected]>
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive.
--- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-tja11xx.c | 277 ++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 3 + include/phy.h | 1 + 5 files changed, 287 insertions(+) create mode 100644 drivers/net/phy/nxp-tja11xx.c
drivers/net/phy/Kconfig +5 -0
@@ -211,6 +211,11 @@ config PHY_NXP_C45_TJA11XX Enable support for NXP C45 TJA11XX PHYs. Currently supports only the TJA1103 PHY. +config PHY_NXP_TJA11XX + bool "NXP TJA11XX Ethernet PHYs support" + help + Currently supports the NXP TJA1100 and TJA1101 PHY. + config PHY_REALTEK bool "Realtek Ethernet PHYs support"
drivers/net/phy/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_PHY_MICREL_KSZ90X1) += micrel_ksz90x1.o obj-$(CONFIG_PHY_MESON_GXL) += meson-gxl.o obj-$(CONFIG_PHY_NATSEMI) += natsemi.o obj-$(CONFIG_PHY_NXP_C45_TJA11XX) += nxp-c45-tja11xx.o +obj-$(CONFIG_PHY_NXP_TJA11XX) += nxp-tja11xx.o obj-$(CONFIG_PHY_REALTEK) += realtek.o obj-$(CONFIG_PHY_SMSC) += smsc.o obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
drivers/net/phy/nxp-tja11xx.c new file +277 -0
277 lines not on this page · raw message
drivers/net/phy/phy.c +3 -0
@@ -532,6 +532,9 @@ int phy_init(void)#ifdef CONFIG_NXP_C45_TJA11XX_PHY phy_nxp_c45_tja11xx_init ();#endif +#ifdef CONFIG_PHY_NXP_TJA11XX +phy_nxp_tja11xx_init (); +#endif #ifdef CONFIG_PHY_REALTEK phy_realtek_init ();#endif
include/phy.h +1 -0
@@ -530,6 +530,7 @@ int phy_micrel_ksz90x1_init(void);int phy_meson_gxl_init (void );int phy_natsemi_init (void );int phy_nxp_c45_tja11xx_init (void ); +int phy_nxp_tja11xx_init (void );int phy_realtek_init (void );int phy_smsc_init (void );int phy_teranetics_init (void );
Signature · 1 line
2.34.1
Re: [PATCH v3 5/6] net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver
Quoted 355 lines · Ariel D'Alessandro
From: Michael Trimarchi <[email protected]>
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive.
Signed-off-by Michael Trimarchi <[email protected]>Signed-off-by Ariel D'Alessandro <[email protected]>--- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-tja11xx.c | 277 ++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 3 + include/phy.h | 1 + 5 files changed, 287 insertions(+) create mode 100644 drivers/net/phy/nxp-tja11xx.cdrivers/net/phy/Kconfig +5
-0@@ -211,6 +211,11 @@ config PHY_NXP_C45_TJA11XX Enable support for NXP C45 TJA11XX PHYs. Currently supports only the TJA1103 PHY. +config PHY_NXP_TJA11XX + bool "NXP TJA11XX Ethernet PHYs support" + help + Currently supports the NXP TJA1100 and TJA1101 PHY. + config PHY_REALTEK bool "Realtek Ethernet PHYs support"drivers/net/phy/Makefile +1
-0@@ -24,6 +24,7 @@ obj-$(CONFIG_PHY_MICREL_KSZ90X1) += micrel_ksz90x1.o obj-$(CONFIG_PHY_MESON_GXL) += meson-gxl.o obj-$(CONFIG_PHY_NATSEMI) += natsemi.o obj-$(CONFIG_PHY_NXP_C45_TJA11XX) += nxp-c45-tja11xx.o +obj-$(CONFIG_PHY_NXP_TJA11XX) += nxp-tja11xx.o obj-$(CONFIG_PHY_REALTEK) += realtek.o obj-$(CONFIG_PHY_SMSC) += smsc.o obj-$(CONFIG_PHY_TERANETICS) += teranetics.odrivers/net/phy/nxp-tja11xx.c new file +277
-0@@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +/* NXP TJA1100 BroadRReach PHY driver +* +* Copyright (C) 2022 Michael Trimarchi <[email protected]> +* Copyright (C) 2022 Ariel D'Alessandro <[email protected]> +* Copyright (C) 2018 Marek Vasut <[email protected]> +*/ + +#include <common.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <phy.h> + +#define PHY_ID_MASK 0xfffffff0 +#define PHY_ID_TJA1100 0x0180dc40 +#define PHY_ID_TJA1101 0x0180dd00 + +#define MII_ECTRL 17 +#define MII_ECTRL_LINK_CONTROL BIT(15) +#define MII_ECTRL_POWER_MODE_MASK GENMASK(14, 11) +#define MII_ECTRL_POWER_MODE_NO_CHANGE (0x0 << 11) +#define MII_ECTRL_POWER_MODE_NORMAL (0x3 << 11) +#define MII_ECTRL_POWER_MODE_STANDBY (0xc << 11) +#define MII_ECTRL_CABLE_TEST BIT(5) +#define MII_ECTRL_CONFIG_EN BIT(2) +#define MII_ECTRL_WAKE_REQUEST BIT(0) + +#define MII_CFG1 18 +#define MII_CFG1_MASTER_SLAVE BIT(15) +#define MII_CFG1_AUTO_OP BIT(14) +#define MII_CFG1_SLEEP_CONFIRM BIT(6) +#define MII_CFG1_LED_MODE_MASK GENMASK(5, 4) +#define MII_CFG1_LED_MODE_LINKUP 0 +#define MII_CFG1_LED_ENABLE BIT(3) + +#define MII_CFG2 19 +#define MII_CFG2_SLEEP_REQUEST_TO GENMASK(1, 0) +#define MII_CFG2_SLEEP_REQUEST_TO_16MS 0x3 + +#define MII_INTSRC 21 +#define MII_INTSRC_LINK_FAIL BIT(10) +#define MII_INTSRC_LINK_UP BIT(9) +#define MII_INTSRC_MASK (MII_INTSRC_LINK_FAIL | \ + MII_INTSRC_LINK_UP) +#define MII_INTSRC_UV_ERR BIT(3) +#define MII_INTSRC_TEMP_ERR BIT(1) + +#define MII_INTEN 22 +#define MII_INTEN_LINK_FAIL BIT(10) +#define MII_INTEN_LINK_UP BIT(9) +#define MII_INTEN_UV_ERR BIT(3) +#define MII_INTEN_TEMP_ERR BIT(1) + +#define MII_COMMSTAT 23 +#define MII_COMMSTAT_LINK_UP BIT(15) +#define MII_COMMSTAT_SQI_STATE GENMASK(7, 5) +#define MII_COMMSTAT_SQI_MAX 7 + +#define MII_GENSTAT 24 +#define MII_GENSTAT_PLL_LOCKED BIT(14) + +#define MII_EXTSTAT 25 +#define MII_EXTSTAT_SHORT_DETECT BIT(8) +#define MII_EXTSTAT_OPEN_DETECT BIT(7) +#define MII_EXTSTAT_POLARITY_DETECT BIT(6) + +#define MII_COMMCFG 27 +#define MII_COMMCFG_AUTO_OP BIT(15) + +static inline int tja11xx_set_bits (struct phy_device *phydev,u32 regnum, +u16 val) +{ +return phy_set_bits_mmd (phydev,MDIO_DEVAD_NONE , regnum, val); +} + +static inline int tja11xx_clear_bits (struct phy_device *phydev,u32 regnum, +u16 val) +{ +return phy_clear_bits_mmd (phydev,MDIO_DEVAD_NONE , regnum, val); +} + +static inline int tja11xx_read (struct phy_device *phydev,int regnum) +{ +return phy_read (phydev,MDIO_DEVAD_NONE , regnum); +} + +static inline int tja11xx_modify (struct phy_device *phydev,int regnum, +u16 mask,u16 set) +{ +return phy_modify (phydev,MDIO_DEVAD_NONE , regnum, mask, set); +} + +static int tja11xx_check (struct phy_device *phydev,u8 reg,u16 mask,u16 set) +{ +int val; + +return read_poll_timeout (tja11xx_read, val, (val & mask) == set,150 , +30000 , phydev, reg); +} + +static int tja11xx_modify_check (struct phy_device *phydev,u8 reg, +u16 mask,u16 set) +{ +int ret; + + ret =tja11xx_modify (phydev, reg, mask, set); +if (ret) +return ret; + +return tja11xx_check (phydev, reg, mask, set); +} + +static int tja11xx_enable_reg_write (struct phy_device *phydev) +{ +return tja11xx_set_bits (phydev,MII_ECTRL ,MII_ECTRL_CONFIG_EN ); +} + +static int tja11xx_enable_link_control (struct phy_device *phydev) +{ +return tja11xx_set_bits (phydev,MII_ECTRL ,MII_ECTRL_LINK_CONTROL ); +} + +static int tja11xx_wakeup (struct phy_device *phydev) +{ +int ret; + + ret =tja11xx_read (phydev,MII_ECTRL ); +if (ret <0 ) +return ret; + +switch (ret &MII_ECTRL_POWER_MODE_MASK ) { +case MII_ECTRL_POWER_MODE_NO_CHANGE : +break ; +case MII_ECTRL_POWER_MODE_NORMAL : + ret =tja11xx_set_bits (phydev,MII_ECTRL , +MII_ECTRL_WAKE_REQUEST ); +if (ret) +return ret; + + ret =tja11xx_clear_bits (phydev,MII_ECTRL , +MII_ECTRL_WAKE_REQUEST ); +if (ret) +return ret; +break ; +case MII_ECTRL_POWER_MODE_STANDBY : + ret =tja11xx_modify_check (phydev,MII_ECTRL , +MII_ECTRL_POWER_MODE_MASK , +MII_ECTRL_POWER_MODE_STANDBY ); +if (ret) +return ret; + + ret =tja11xx_modify (phydev,MII_ECTRL , +MII_ECTRL_POWER_MODE_MASK , +MII_ECTRL_POWER_MODE_NORMAL ); +if (ret) +return ret; + + ret =tja11xx_modify_check (phydev,MII_GENSTAT , +MII_GENSTAT_PLL_LOCKED , +MII_GENSTAT_PLL_LOCKED ); +if (ret) +return ret; + +return tja11xx_enable_link_control (phydev); +default : +break ; + } + +return 0 ; +} + +static int tja11xx_config_init (struct phy_device *phydev) +{ +int ret; + + ret =tja11xx_enable_reg_write (phydev); +if (ret) +return ret; + + phydev->autoneg =AUTONEG_DISABLE ; + phydev->speed =SPEED_100 ; + phydev->duplex =DUPLEX_FULL ; + +switch (phydev->phy_id &PHY_ID_MASK ) { +case PHY_ID_TJA1100 : + ret =tja11xx_modify (phydev,MII_CFG1 , +MII_CFG1_AUTO_OP |MII_CFG1_LED_MODE_MASK | +MII_CFG1_LED_ENABLE , +MII_CFG1_AUTO_OP | +MII_CFG1_LED_MODE_LINKUP | +MII_CFG1_LED_ENABLE ); +if (ret) +return ret; +break ; +case PHY_ID_TJA1101 : + ret =tja11xx_set_bits (phydev,MII_COMMCFG , +MII_COMMCFG_AUTO_OP ); +if (ret) +return ret; +break ; +default : +return -EINVAL ; + } + + ret =tja11xx_clear_bits (phydev,MII_CFG1 ,MII_CFG1_SLEEP_CONFIRM ); +if (ret) +return ret; + + ret =tja11xx_modify (phydev,MII_CFG2 ,MII_CFG2_SLEEP_REQUEST_TO , +MII_CFG2_SLEEP_REQUEST_TO_16MS ); +if (ret) +return ret; + + ret =tja11xx_wakeup (phydev); +if (ret <0 ) +return ret; + +/* ACK interrupts by reading the status register */ + ret =tja11xx_read (phydev,MII_INTSRC ); +if (ret <0 ) +return ret; + +return 0 ; +} + +static int tja11xx_startup (struct phy_device *phydev) +{ +int ret; + + ret =genphy_update_link (phydev); +if (ret) +return ret; + + ret =tja11xx_read (phydev,MII_CFG1 ); +if (ret <0 ) +return ret; + +if (phydev->link) { + ret =tja11xx_read (phydev,MII_COMMSTAT ); +if (ret <0 ) +return ret; + +if (!(ret &MII_COMMSTAT_LINK_UP )) + phydev->link =0 ; + } + +return 0 ; +} + +static struct phy_driver TJA1100_driver = { + .name ="NXP TJA1100" , + .uid =PHY_ID_TJA1100 , + .mask =PHY_ID_MASK , + .features =PHY_BASIC_FEATURES , + .config = &tja11xx_config_init, + .startup = &tja11xx_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver TJA1101_driver = { + .name ="NXP TJA1101" , + .uid =PHY_ID_TJA1101 , + .mask =PHY_ID_MASK , + .features =PHY_BASIC_FEATURES , + .config = &tja11xx_config_init, + .startup = &tja11xx_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_nxp_tja11xx_init (void ) +{ +phy_register (&TJA1100_driver); +phy_register (&TJA1101_driver); + +return 0 ; +}drivers/net/phy/phy.c +3
-0@@ -532,6 +532,9 @@ int phy_init(void)#ifdef CONFIG_NXP_C45_TJA11XX_PHY phy_nxp_c45_tja11xx_init ();#endif +#ifdef CONFIG_PHY_NXP_TJA11XX +phy_nxp_tja11xx_init (); +#endif #ifdef CONFIG_PHY_REALTEK phy_realtek_init ();#endif include/phy.h +1
-1@@ -530,6 +530,7 @@ int phy_micrel_ksz90x1_init(void);int phy_meson_gxl_init (void );int phy_natsemi_init (void );int phy_nxp_c45_tja11xx_init (void ); +int phy_nxp_tja11xx_init (void );int phy_realtek_init (void );int phy_smsc_init (void );int phy_teranetics_init (void ); --
Quoted 2 lines
2.34.1
PATCH v3 6/6 bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
In reply to Ariel D'AlessandroIntroduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.
Add support for iMX8MN BSH SMM S2 board:
- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet
Add support for iMX8MN BSH SMM S2 PRO board:
- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet
--- arch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi | 423 ++++++++ .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 225 +++++ arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2.dts | 48 + arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2pro.dts | 80 ++ arch/arm/mach-imx/imx8m/Kconfig | 15 + board/bsh/imx8mn_smm_s2/Kconfig | 49 + board/bsh/imx8mn_smm_s2/MAINTAINERS | 8 + board/bsh/imx8mn_smm_s2/Makefile | 13 + board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c | 23 + board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg | 10 + board/bsh/imx8mn_smm_s2/spl.c | 93 ++ configs/imx8mn_bsh_smm_s2_defconfig | 97 ++ configs/imx8mn_bsh_smm_s2pro_defconfig | 94 ++ doc/board/bsh/imx8mn_bsh_smm_s2.rst | 62 ++ doc/board/bsh/index.rst | 9 + doc/board/index.rst | 1 + include/configs/imx8mn_bsh_smm_s2.h | 52 + include/configs/imx8mn_bsh_smm_s2_common.h | 62 ++ include/configs/imx8mn_bsh_smm_s2pro.h | 35 + 24 files changed, 3313 insertions(+) create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS create mode 100644 board/bsh/imx8mn_smm_s2/Makefile create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg create mode 100644 board/bsh/imx8mn_smm_s2/spl.c create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst create mode 100644 doc/board/bsh/index.rst create mode 100644 include/configs/imx8mn_bsh_smm_s2.h create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h
arch/arm/dts/Makefile +2 -0
@@ -911,6 +911,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-venice-gw7902.dtb \ imx8mm-verdin.dtb \ phycore-imx8mm.dtb \ + imx8mn-bsh-smm-s2.dtb \ + imx8mn-bsh-smm-s2pro.dtb \ imx8mn-ddr4-evk.dtb \ imx8mq-cm.dtb \ imx8mn-evk.dtb \
arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi new file +423 -0
423 lines not on this page · raw message
arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi new file +225 -0
225 lines not on this page · raw message
arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 Collabora Ltd. + * Copyright 2021 BSH Hausgeraete GmbH + */ + +#include "imx8mn-bsh-smm-s2-u-boot-common.dtsi" + +&pinctrl_gpmi_nand { + u-boot,dm-spl; +}; + +&gpmi { + u-boot,dm-spl; +};
arch/arm/dts/imx8mn-bsh-smm-s2.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 Collabora Ltd. + * Copyright 2021 BSH Hausgeraete GmbH + */ + +#include "imx8mn-bsh-smm-s2-u-boot-common.dtsi" + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +};
arch/arm/dts/imx8mn-bsh-smm-s2pro.dts new file +80 -0
80 lines not on this page · raw message
arch/arm/mach-imx/imx8m/Kconfig +15 -0
@@ -78,6 +78,20 @@ config TARGET_IMX8MM_VENICE select SUPPORT_SPL select IMX8M_LPDDR4 +config TARGET_IMX8MN_BSH_SMM_S2 + bool "imx8mn-bsh-smm-s2" + select BINMAN + select IMX8MN + select SUPPORT_SPL + select IMX8M_DDR3L + +config TARGET_IMX8MN_BSH_SMM_S2PRO + bool "imx8mn-bsh-smm-s2pro" + select BINMAN + select IMX8MN + select SUPPORT_SPL + select IMX8M_DDR3L + config TARGET_KONTRON_MX8MM bool "Kontron Electronics N80xx" select BINMAN
@@ -186,6 +200,7 @@ endchoice source "board/beacon/imx8mm/Kconfig" source "board/beacon/imx8mn/Kconfig" +source "board/bsh/imx8mn_smm_s2/Kconfig" source "board/compulab/imx8mm-cl-iot-gate/Kconfig" source "board/engicam/imx8mm/Kconfig" source "board/freescale/imx8mq_evk/Kconfig"
board/bsh/imx8mn_smm_s2/Kconfig new file +49 -0
49 lines not on this page · raw message
board/bsh/imx8mn_smm_s2/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +ARM i.MX8MN BSH SMM S2 BOARDS +M: Ariel D'Alessandro <[email protected]> +M: Michael Trimarchi <[email protected]> +S: Maintained +F: arch/arm/dts/imx8mn-bsh-smm-s2* +F: board/bsh/imx8mn_smm_s2/ +F: configs/imx8mn_bsh_smm_s2* +F: include/configs/imx8mn_bsh_smm_s2*
board/bsh/imx8mn_smm_s2/Makefile new file +13 -0
@@ -0,0 +1,13 @@ +# +# Copyright 2021 Collabora Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mn_smm_s2.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_BSH_SMM_S2_DDR3L_256) += ddr3l_timing_256m.o +obj-$(CONFIG_BSH_SMM_S2_DDR3L_512) += ddr3l_timing_512m.o +endif
board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c new file +941 -0
941 lines not on this page · raw message
board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c new file +941 -0
941 lines not on this page · raw message
board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c new file +23 -0
@@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2021 Collabora Ltd. +*/ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <env.h> + +int board_init (void ) +{ +return 0 ; +} + +int board_late_init (void ) +{ +if (is_usb_boot ()) { +env_set ("bootcmd" ,"run bootcmd_mfg" ); +env_set ("bootdelay" ,"0" ); + } + +return 0 ; +}
board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg new file +10 -0
@@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 Collabora Ltd. + */ + +#define __ASSEMBLY__ + +ROM_VERSION v2 +BOOT_FROM sd +LOADER u-boot-spl-ddr.bin 0x912000
board/bsh/imx8mn_smm_s2/spl.c new file +93 -0
93 lines not on this page · raw message
configs/imx8mn_bsh_smm_s2_defconfig new file +97 -0
81 lines not on this page · raw message
configs/imx8mn_bsh_smm_s2pro_defconfig new file +94 -0
94 lines not on this page · raw message
doc/board/bsh/imx8mn_bsh_smm_s2.rst new file +62 -0
62 lines not on this page · raw message
include/configs/imx8mn_bsh_smm_s2.h new file +52 -0
52 lines not on this page · raw message
include/configs/imx8mn_bsh_smm_s2_common.h new file +62 -0
62 lines not on this page · raw message
include/configs/imx8mn_bsh_smm_s2pro.h new file +35 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
Hi Stefano
Any plan to get those boards in?
Quoted 89 lines · Ariel D'Alessandro
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.This patchset also adds support for NXP TJA11xx Ethernet PHYs.
Changes in v3:
* Added nxp-c45-tja11xx driver.
* Added ethernet support to iMX8MN BSH SMM S2 boards.Changes in v2:
* Properly addedMAINTAINERSentry.
* Fixed binman configuration.
* Picked device tree from kernel.
* RemovedCONFIG_SPL_BUILDanti-pattern in board config.
* Removed downstream stuff in bootargs.
* Added board documentation.Ariel D'Alessandro (4):
phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
iopoll: Extendread_poll_timeoutmacro to support variable parameters
net: phy: Addphy_modify()accessor
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsMichael Trimarchi (2):
imx8m: add regs used by GPMI
net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driverarch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi | 423 ++++++++ .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 225 +++++ arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2.dts | 48 + arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2pro.dts | 80 ++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 7 + arch/arm/mach-imx/imx8m/Kconfig | 15 + arch/arm/mach-socfpga/reset_manager_s10.c | 20 +- board/bsh/imx8mn_smm_s2/Kconfig | 49 + board/bsh/imx8mn_smm_s2/MAINTAINERS | 8 + board/bsh/imx8mn_smm_s2/Makefile | 13 + board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c | 23 + board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg | 10 + board/bsh/imx8mn_smm_s2/spl.c | 93 ++ configs/imx8mn_bsh_smm_s2_defconfig | 97 ++ configs/imx8mn_bsh_smm_s2pro_defconfig | 94 ++ doc/board/bsh/imx8mn_bsh_smm_s2.rst | 62 ++ doc/board/bsh/index.rst | 9 + doc/board/index.rst | 1 + drivers/mmc/rockchip_sdhci.c | 9 +- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-c45-tja11xx.c | 6 +- drivers/net/phy/nxp-tja11xx.c | 277 ++++++ drivers/net/phy/phy.c | 23 + include/configs/imx8mn_bsh_smm_s2.h | 52 + include/configs/imx8mn_bsh_smm_s2_common.h | 62 ++ include/configs/imx8mn_bsh_smm_s2pro.h | 35 + include/linux/iopoll.h | 12 +- include/phy.h | 3 + 34 files changed, 3654 insertions(+), 22 deletions(-) create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS create mode 100644 board/bsh/imx8mn_smm_s2/Makefile create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg create mode 100644 board/bsh/imx8mn_smm_s2/spl.c create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst create mode 100644 doc/board/bsh/index.rst create mode 100644 drivers/net/phy/nxp-tja11xx.c create mode 100644 include/configs/imx8mn_bsh_smm_s2.h create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h--
2.34.1
Signature · 11 lines
Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 [email protected] __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 [email protected] www.amarulasolutions.com
Hi Michael,
Quoted 4 lines · Michael Nazzareno Trimarchi
Hi Stefano
Any plan to get those boards in?
Sure, but according how Tom has already set up. Merge window closed at 31th, January, and later patches (as these) if are not fixes, will go into -next.
Best regards,
Stefano
Quoted 93 lines
Quoted 89 lines · Ariel D'Alessandro
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.This patchset also adds support for NXP TJA11xx Ethernet PHYs.
Changes in v3:
* Added nxp-c45-tja11xx driver.
* Added ethernet support to iMX8MN BSH SMM S2 boards.Changes in v2:
* Properly addedMAINTAINERSentry.
* Fixed binman configuration.
* Picked device tree from kernel.
* RemovedCONFIG_SPL_BUILDanti-pattern in board config.
* Removed downstream stuff in bootargs.
* Added board documentation.Ariel D'Alessandro (4):
phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
iopoll: Extendread_poll_timeoutmacro to support variable parameters
net: phy: Addphy_modify()accessor
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsMichael Trimarchi (2):
imx8m: add regs used by GPMI
net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driverarch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi | 423 ++++++++ .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 225 +++++ arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2.dts | 48 + arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2pro.dts | 80 ++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 7 + arch/arm/mach-imx/imx8m/Kconfig | 15 + arch/arm/mach-socfpga/reset_manager_s10.c | 20 +- board/bsh/imx8mn_smm_s2/Kconfig | 49 + board/bsh/imx8mn_smm_s2/MAINTAINERS | 8 + board/bsh/imx8mn_smm_s2/Makefile | 13 + board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c | 23 + board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg | 10 + board/bsh/imx8mn_smm_s2/spl.c | 93 ++ configs/imx8mn_bsh_smm_s2_defconfig | 97 ++ configs/imx8mn_bsh_smm_s2pro_defconfig | 94 ++ doc/board/bsh/imx8mn_bsh_smm_s2.rst | 62 ++ doc/board/bsh/index.rst | 9 + doc/board/index.rst | 1 + drivers/mmc/rockchip_sdhci.c | 9 +- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-c45-tja11xx.c | 6 +- drivers/net/phy/nxp-tja11xx.c | 277 ++++++ drivers/net/phy/phy.c | 23 + include/configs/imx8mn_bsh_smm_s2.h | 52 + include/configs/imx8mn_bsh_smm_s2_common.h | 62 ++ include/configs/imx8mn_bsh_smm_s2pro.h | 35 + include/linux/iopoll.h | 12 +- include/phy.h | 3 + 34 files changed, 3654 insertions(+), 22 deletions(-)create mode 100644
arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2.dtscreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2pro.dtscreate mode 100644 board/bsh/imx8mn_smm_s2/Kconfig
create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS create mode 100644 board/bsh/imx8mn_smm_s2/Makefile create mode 100644board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.ccreate mode 100644board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.ccreate mode 100644board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.ccreate mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg create mode 100644board/bsh/imx8mn_smm_s2/spl.c
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig create mode 100644doc/board/bsh/imx8mn_bsh_smm_s2.rstcreate mode 100644doc/board/bsh/index.rst
create mode 100644drivers/net/phy/nxp-tja11xx.c
create mode 100644include/configs/imx8mn_bsh_smm_s2.hcreate mode 100644include/configs/imx8mn_bsh_smm_s2_common.hcreate mode 100644include/configs/imx8mn_bsh_smm_s2pro.h--
2.34.1
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Hi Stefano
Quoted 4 lines · Stefano Babic
Hi Michael,
On 28.02.22 20:38, Michael Nazzareno Trimarchi wrote:
Quoted 9 lines
Quoted 4 lines
Hi Stefano
Any plan to get those boards in?
Sure, but according how Tom has already set up. Merge window closed at 31th, January, and later patches (as these) if are not fixes, will go into -next.
We would like to know if we have made any progress here.
Michael
Quoted 104 lines
Best regards,
StefanoQuoted 88 lines
Quoted 86 lines · Ariel D'Alessandro
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.This patchset also adds support for NXP TJA11xx Ethernet PHYs.
Changes in v3:
* Added nxp-c45-tja11xx driver.
* Added ethernet support to iMX8MN BSH SMM S2 boards.Changes in v2:
* Properly addedMAINTAINERSentry.
* Fixed binman configuration.
* Picked device tree from kernel.
* RemovedCONFIG_SPL_BUILDanti-pattern in board config.
* Removed downstream stuff in bootargs.
* Added board documentation.Ariel D'Alessandro (4):
phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
iopoll: Extendread_poll_timeoutmacro to support variable parameters
net: phy: Addphy_modify()accessor
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsMichael Trimarchi (2):
imx8m: add regs used by GPMI
net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driverarch/arm/dts/Makefile | 2 + arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi | 423 ++++++++ .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 225 +++++ arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2.dts | 48 + arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi | 15 + arch/arm/dts/imx8mn-bsh-smm-s2pro.dts | 80 ++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 7 + arch/arm/mach-imx/imx8m/Kconfig | 15 + arch/arm/mach-socfpga/reset_manager_s10.c | 20 +- board/bsh/imx8mn_smm_s2/Kconfig | 49 + board/bsh/imx8mn_smm_s2/MAINTAINERS | 8 + board/bsh/imx8mn_smm_s2/Makefile | 13 + board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c | 941 ++++++++++++++++++ board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c | 23 + board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg | 10 + board/bsh/imx8mn_smm_s2/spl.c | 93 ++ configs/imx8mn_bsh_smm_s2_defconfig | 97 ++ configs/imx8mn_bsh_smm_s2pro_defconfig | 94 ++ doc/board/bsh/imx8mn_bsh_smm_s2.rst | 62 ++ doc/board/bsh/index.rst | 9 + doc/board/index.rst | 1 + drivers/mmc/rockchip_sdhci.c | 9 +- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-c45-tja11xx.c | 6 +- drivers/net/phy/nxp-tja11xx.c | 277 ++++++ drivers/net/phy/phy.c | 23 + include/configs/imx8mn_bsh_smm_s2.h | 52 + include/configs/imx8mn_bsh_smm_s2_common.h | 62 ++ include/configs/imx8mn_bsh_smm_s2pro.h | 35 + include/linux/iopoll.h | 12 +- include/phy.h | 3 + 34 files changed, 3654 insertions(+), 22 deletions(-)create mode 100644
arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2.dtscreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mn-bsh-smm-s2pro.dtscreate mode 100644 board/bsh/imx8mn_smm_s2/Kconfig
create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS create mode 100644 board/bsh/imx8mn_smm_s2/Makefile create mode 100644board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.ccreate mode 100644board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.ccreate mode 100644board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.ccreate mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg create mode 100644board/bsh/imx8mn_smm_s2/spl.c
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig create mode 100644doc/board/bsh/imx8mn_bsh_smm_s2.rstcreate mode 100644doc/board/bsh/index.rst
create mode 100644drivers/net/phy/nxp-tja11xx.c
create mode 100644include/configs/imx8mn_bsh_smm_s2.hcreate mode 100644include/configs/imx8mn_bsh_smm_s2_common.hcreate mode 100644include/configs/imx8mn_bsh_smm_s2pro.hQuoted 5 lines
Quoted 3 lines
--
2.34.1--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
Signature · 11 lines
Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 [email protected] __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 [email protected] www.amarulasolutions.com