arm64: dts: qcom: sdm845: Add gsi dma node
PATCH 1/2 arm64: dts: qcom: sdm845: Add gsi dma node
This add the device node for gsi dma0 instances found in sdm845.
Signed-off-by Vinod Koul <[email protected]>
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 46 ++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)
arch/arm64/boot/dts/qcom/sdm845.dtsi +46 -0
@@ -1125,6 +1125,29 @@ opp-128000000 { }; }; + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0016 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>;
@@ -1544,6 +1567,29 @@ uart7: serial@89c000 { }; }; + gpi_dma1: dma-controller@0xa00000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x06d6 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x6000>;
Signature · 1 line
2.34.1
PATCH 2/2 arm64: dts: qcom: sdm845: enable dma for spi
Add dmas property for spi@880000 and pinconf setting so that we can use dma for this spi device. Also, add iommu properties for qup and spi.
Signed-off-by Vinod Koul <[email protected]>
--- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++++++++++ 2 files changed, 15 insertions(+)
arch/arm64/boot/dts/qcom/sdm845-db845c.dts +4 -0
@@ -425,6 +425,10 @@ &gmu { status = "okay"; }; +&gpi_dma0 { + status = "okay"; +}; + &gpu { status = "okay"; zap-shader {
arch/arm64/boot/dts/qcom/sdm845.dtsi +11 -0
@@ -12,6 +12,7 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h>
@@ -1194,6 +1195,9 @@ spi0: spi@880000 { interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; };
@@ -2633,6 +2637,13 @@ pinmux { "gpio2", "gpio3"; function = "qup0"; }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; }; qup_spi1_default: qup-spi1-default {
Signature · 1 line
2.34.1
Bjorn Andersson
AppliedQuoted 3 lines · Vinod Koul
This add the device node for gsi dma0 instances found in sdm845.
Applied, thanks!
[1/2] arm64: dts: qcom: sdm845: Add gsi dma node
commit: 29aed4b4eb992966f6f29a6a9885fe4357d604da
[2/2] arm64: dts: qcom: sdm845: enable dma for spi
commit: 8f6e20adaaf34cfe1101f1b1bc9d2af01d05ee1fBest regards,
Signature · 1 line
Bjorn Andersson <[email protected]>