clk: Improve clock range handling
Subsystems (6)
v6 cover clk: Improve clock range handling
Hi,
This is a follow-up of the discussion here:
https://lore.kernel.org/linux-clk/20210319150355.xzw7ikwdaga2dwhv@gilmour/
and here:
https://lore.kernel.org/all/[email protected]/
While the initial proposal implemented a new API to temporarily raise and lower clock rates based on consumer workloads, Stephen suggested an alternative approach implemented here.
The main issue that needed to be addressed in our case was that in a situation where we would have multiple calls to clk_set_rate_range, we would end up with a clock at the maximum of the minimums being set. This would be expected, but the issue was that if one of the users was to relax or drop its requirements, the rate would be left unchanged, even though the ideal rate would have changed.
So something like
clk_set_rate(user1_clk, 1000);clk_set_min_rate(user1_clk, 2000);clk_set_min_rate(user2_clk, 3000);clk_set_min_rate(user2_clk, 1000);
Would leave the clock running at 3000Hz, while the minimum would now be 2000Hz.
This was mostly due to the fact that the core only triggers a rate change in clk_set_rate_range() if the current rate is outside of the boundaries, but not if it's within the new boundaries.
That series changes that and will trigger a rate change on every call, with the former rate being tried again. This way, providers have a chance to follow whatever policy they see fit for a given clock each time the boundaries change.
This series also implements some kunit tests, first to test a few rate related functions in the CCF, and then extends it to make sure that behaviour has some test coverage.
Let me know what you think
Maxime
Changes from v5:
- Changed clk_hw_create_clk for clk_hw_get_clk since the former isn't exported to modules.
- Added fix for clk_hw_get_clk
Changes from v4:
- Rename the test file
- Move all the tests to the first patch, and fix them up as fixes are done
- Improved the test conditions
- Added more tests
- Improved commit messages
- Fixed a regression where two disjoints clock ranges would now be accepted
Changes from v3:
- Renamed the test file and Kconfig option
- Add option to .kunitconfig
- Switch to kunit_kzalloc
- Use KUNIT_EXPECT_* instead of KUNIT_ASSERT_* where relevant
- Test directly relevant calls instead of going through a temporary variable
- Switch to more precise KUNIT_ASSERT_* macros where relevant
Changes from v2:
- Rebased on current next
- Rewrote the whole thing according to Stephen reviews
- Implemented some kunit tests
Changes from v1:
- Return NULL in clk_request_start if clk pointer is NULL
- Test for clk_req pointer in clk_request_done
- Add another user in vc4
- Rebased on top of v5.15-rc1
Maxime Ripard (12):
clk: Fix clk_hw_get_clk() when dev is NULL
clk: Introduce Kunit Tests for the framework
clk: Enforce that disjoints limits are invalid
clk: Always clamp the rounded rate
clk: Use clamp instead of open-coding our own
clk: Always set the rate on clk_set_range_rate
clk: Add clk_drop_range
clk: bcm: rpi: Add variant structure
clk: bcm: rpi: Set a default minimum rate
clk: bcm: rpi: Run some clocks at the minimum rate allowed drm/vc4: Add logging and comments
drm/vc4: hdmi: Remove clock rate initialization
drivers/clk/.kunitconfig | 1 + drivers/clk/Kconfig | 7 + drivers/clk/Makefile | 1 + drivers/clk/bcm/clk-raspberrypi.c | 125 ++++- drivers/clk/clk.c | 76 ++- drivers/clk/clk_test.c | 790 ++++++++++++++++++++++++++++++ drivers/gpu/drm/vc4/vc4_hdmi.c | 13 - drivers/gpu/drm/vc4/vc4_kms.c | 11 + include/linux/clk.h | 11 + 9 files changed, 980 insertions(+), 55 deletions(-) create mode 100644 drivers/clk/clk_test.c
Signature · 1 line
2.35.1
PATCH v6 1/12 clk: Fix clk_hw_get_clk() when dev is NULL
Any registered clk_core structure can have a NULL pointer in its dev field. While never actually documented, this is evidenced by the wide usage of clk_register and clk_hw_register with a NULL device pointer, and the fact that the core of_clk_hw_register() function also passes a NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that case will result in a NULL pointer derefence when it calls dev_name() on that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device pointer is NULL.
--- drivers/clk/clk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clk/clk.c +2 -1
@@ -3773,8 +3773,9 @@ struct clk *clk_hw_create_clk(struct device *dev, struct clk_hw *hw,struct clk *clk_hw_get_clk (struct clk_hw *hw,const char *con_id) {struct device *dev = hw->core->dev; +const char *name = dev ?dev_name (dev) :NULL ; -return clk_hw_create_clk (dev, hw,dev_name (dev), con_id); +return clk_hw_create_clk (dev, hw, name, con_id); }EXPORT_SYMBOL (clk_hw_get_clk);
Signature · 1 line
2.35.1
PATCH v6 2/12 clk: Introduce Kunit Tests for the framework
In reply to Maxime RipardLet's test various parts of the rate-related clock API with the kunit testing framework.
--- drivers/clk/.kunitconfig | 1 + drivers/clk/Kconfig | 7 + drivers/clk/Makefile | 1 + drivers/clk/clk_test.c | 786 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 795 insertions(+) create mode 100644 drivers/clk/clk_test.c
drivers/clk/.kunitconfig +1 -0
@@ -1,3 +1,4 @@ CONFIG_KUNIT=y CONFIG_COMMON_CLK=y +CONFIG_CLK_KUNIT_TEST=y CONFIG_CLK_GATE_KUNIT_TEST=y
drivers/clk/Kconfig +7 -0
@@ -429,6 +429,13 @@ source "drivers/clk/xilinx/Kconfig" source "drivers/clk/zynqmp/Kconfig" # Kunit test cases +config CLK_KUNIT_TEST + tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Kunit tests for the common clock framework. + config CLK_GATE_KUNIT_TEST tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS depends on KUNIT
drivers/clk/Makefile +1 -0
@@ -2,6 +2,7 @@ # common clock types obj-$(CONFIG_HAVE_CLK) += clk-devres.o clk-bulk.o clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o +obj-$(CONFIG_CLK_KUNIT_TEST) += clk_test.o obj-$(CONFIG_COMMON_CLK) += clk-divider.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
drivers/clk/clk_test.c new file +786 -0
786 lines not on this page · raw message
Signature · 1 line
2.35.1
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>
Looks good to me on the KUnit side.
Two small nits below.
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y $ lcov -t "clk_tests" -o coverage.info -c -d .kunit/ --gcov-tool=/usr/bin/gcov-6
3) intersected that with the total diff
Incremental coverage for 3/9 files in --diff_file Total incremental: 99.29% coverage (281/283 lines)
drivers/clk/clk.c: 84.62% coverage (11/13 lines) drivers/clk/clk_test.c: 100.00% coverage (269/269 lines) include/linux/clk.h: 100.00% coverage (1/1 lines)
Missing lines are drivers/clk/clk.c:2397-8, i.e. this part of the diff:
+ if (ret) {
+ /* rollback the changes */ + clk->min_rate = old_min; <- 2397 + clk->max_rate = old_max; <- 2398
These are from before and were just moved around.
Note: this filters out code that wasn't compiled in and wasn't executable. So that's why it's missing clk-raspberrypi.c and friends and it says clk.c had 13 changed lines (since most of the lines are comments).
Quoted 54 lines
--- drivers/clk/.kunitconfig | 1 + drivers/clk/Kconfig | 7 + drivers/clk/Makefile | 1 + drivers/clk/clk_test.c | 786 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 795 insertions(+) create mode 100644 drivers/clk/clk_test.cdrivers/clk/.kunitconfig +1
-0@@ -1,3 +1,4 @@ CONFIG_KUNIT=y CONFIG_COMMON_CLK=y +CONFIG_CLK_KUNIT_TEST=y CONFIG_CLK_GATE_KUNIT_TEST=ydrivers/clk/Kconfig +7
-0@@ -429,6 +429,13 @@ source "drivers/clk/xilinx/Kconfig" source "drivers/clk/zynqmp/Kconfig" # Kunit test cases +config CLK_KUNIT_TEST + tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Kunit tests for the common clock framework. + config CLK_GATE_KUNIT_TEST tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS depends on KUNITdrivers/clk/Makefile +1
-0@@ -2,6 +2,7 @@ # common clock types obj-$(CONFIG_HAVE_CLK) += clk-devres.o clk-bulk.o clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o +obj-$(CONFIG_CLK_KUNIT_TEST) += clk_test.o obj-$(CONFIG_COMMON_CLK) += clk-divider.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.odrivers/clk/clk_test.c new file +0
-0
drivers/clk/clk_test.c line 7
Quoted 7 lines
drivers/clk/clk_test.c new file +7
-0@@ -0,0 +1,786 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Kunit test for clk rate management +*/ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/slab.h>
Very nit:
Is this #include <linux/slab.h> necessary?
I removed it and added a check that its header guard is not defined:
+#ifdef _LINUX_SLAB_H
+#error "Included slab.h indirectly"
+#endif
The test still compiled, so afaik, nothing here needs it.
Quoted 134 lines
drivers/clk/clk_test.c new file +133
-0+ +/* Needed for clk_hw_get_clk() */ +#include "clk.h" + +#include <kunit/test.h> + +#define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000) +#define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000) +#define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000) + +struct clk_dummy_context { +struct clk_hw hw; +unsigned long rate; +}; + +static unsigned long clk_dummy_recalc_rate (struct clk_hw *hw, +unsigned long parent_rate) +{ +struct clk_dummy_context *ctx = + container_of(hw, struct clk_dummy_context, hw); + +return ctx->rate; +} + +static int clk_dummy_determine_rate (struct clk_hw *hw, +struct clk_rate_request *req) +{ +/* Just return the same rate without modifying it */ +return 0 ; +} + +static int clk_dummy_maximize_rate (struct clk_hw *hw, +struct clk_rate_request *req) +{ +/* +* If there's a maximum set, always run the clock at the maximum +* allowed. +*/ +if (req->max_rate <ULONG_MAX ) + req->rate = req->max_rate; + +return 0 ; +} + +static int clk_dummy_minimize_rate (struct clk_hw *hw, +struct clk_rate_request *req) +{ +/* +* If there's a minimum set, always run the clock at the minimum +* allowed. +*/ +if (req->min_rate >0 ) + req->rate = req->min_rate; + +return 0 ; +} + +static int clk_dummy_set_rate (struct clk_hw *hw, +unsigned long rate, +unsigned long parent_rate) +{ +struct clk_dummy_context *ctx = + container_of(hw, struct clk_dummy_context, hw); + + ctx->rate = rate; +return 0 ; +} + +static const struct clk_ops clk_dummy_rate_ops = { + .recalc_rate = clk_dummy_recalc_rate, + .determine_rate = clk_dummy_determine_rate, + .set_rate = clk_dummy_set_rate, +}; + +static const struct clk_ops clk_dummy_maximize_rate_ops = { + .recalc_rate = clk_dummy_recalc_rate, + .determine_rate = clk_dummy_maximize_rate, + .set_rate = clk_dummy_set_rate, +}; + +static const struct clk_ops clk_dummy_minimize_rate_ops = { + .recalc_rate = clk_dummy_recalc_rate, + .determine_rate = clk_dummy_minimize_rate, + .set_rate = clk_dummy_set_rate, +}; + +static int clk_test_init_with_ops (struct kunit *test,const struct clk_ops *ops) +{ +struct clk_dummy_context *ctx; +struct clk_init_data init = { }; +int ret; + + ctx =kunit_kzalloc (test,sizeof (*ctx),GFP_KERNEL ); +if (!ctx) +return -ENOMEM ; + ctx->rate =DUMMY_CLOCK_INIT_RATE ; + test->priv = ctx; + + init.name ="test_dummy_rate" ; + init.ops = ops; + ctx->hw.init = &init; + + ret =clk_hw_register (NULL , &ctx->hw); +if (ret) +return ret; + +return 0 ; +} + +static int clk_test_init (struct kunit *test) +{ +return clk_test_init_with_ops (test, &clk_dummy_rate_ops); +} + +static int clk_maximize_test_init (struct kunit *test) +{ +return clk_test_init_with_ops (test, &clk_dummy_maximize_rate_ops); +} + +static int clk_minimize_test_init (struct kunit *test) +{ +return clk_test_init_with_ops (test, &clk_dummy_minimize_rate_ops); +} + +static void clk_test_exit (struct kunit *test) +{ +struct clk_dummy_context *ctx = test->priv; + +clk_hw_unregister (&ctx->hw); +} + +/* +* Test that the actual rate matches what is returned by clk_get_rate()
drivers/clk/clk_test.c line 150
Quoted 10 lines
drivers/clk/clk_test.c new file +10
-0+*/ +static void clk_test_get_rate (struct kunit *test) +{ +struct clk_dummy_context *ctx = test->priv; +struct clk_hw *hw = &ctx->hw; +struct clk *clk = hw->clk; +unsigned long rate; + + rate =clk_get_rate (clk); +KUNIT_ASSERT_TRUE (test, rate >0 );
nit:
KUNIT_ASSERT_GT(test, rate, 0);
Looks like we updated the others below but forgot this one.
Stephen Boyd
maintainerRe: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoting Daniel Latypov (2022-02-23 14:50:59)
Quoted 14 lines · Maxime Ripard
Quoted 7 lines
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.
Quoted 8 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y $ lcov -t "clk_tests" -o coverage.info -c -d .kunit/ --gcov-tool=/usr/bin/gcov-6
This is cool. Thanks! Is it possible to add some 'coverage' command to kunit so we don't have to recall this invocation?
Quoted 2 lines
3) intersected that with the total diff
This would also be cool to do automatically with a revision range.
Quoted 13 lines
Incremental coverage for 3/9 files in --diff_file Total incremental: 99.29% coverage (281/283 lines)
drivers/clk/clk.c: 84.62% coverage (11/13 lines)drivers/clk/clk_test.c: 100.00% coverage (269/269 lines)include/linux/clk.h: 100.00% coverage (1/1 lines)Missing lines are drivers/clk/clk.c:2397-8, i.e. this part of the diff:
(quoted diff) +4
-0+ if (ret) { + /* rollback the changes */ + clk->min_rate = old_min; <- 2397 + clk->max_rate = old_max; <- 2398
Quoted 1 line
These are from before and were just moved around.
We could trigger a failure in the provider when the rate is set, and then we could call round_rate() again and make sure the boundaries from before are maintained.
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 20 lines · Stephen Boyd
Quoting Daniel Latypov (2022-02-23 14:50:59)
Quoted 18 lines · Maxime Ripard
Quoted 7 lines
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage
Quoted 7 lines
Quoted 4 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y $ lcov -t "clk_tests" -o coverage.info -c -d .kunit/ --gcov-tool=/usr/bin/gcov-6This is cool. Thanks! Is it possible to add some 'coverage' command to kunit so we don't have to recall this invocation?
This is documented at
https://www.kernel.org/doc/html/latest/dev-tools/kunit/running_tips.html#generating-code-coverage-reports-under-uml
It also includes pointers on how to use lcov to process the .gcda files. I wrote it before --kconfig_add existed, so it just looks a bit different.
The main blockers to directly supporting this in kunit.py are 1.) this only works on UML
2.) it needs gcc-6 or lower (and the kernel's min version is 5.1, iirc)... 3.) in kernels older than 5.14, this requires some more hacks to get working. So for the large portion of us stuck dealing with somewhat older kernels, we'd have to do stuff manually anyway.
For #1, we'd need different kconfig options and kunit.py's QEMU would need some sort of userspace (busybox should be sufficient). For #2, I don't recall what the precise issues were anymore. But I think there were some more issues in gcc 8 or 9... :(
Quoted 5 lines
Quoted 3 lines
3) intersected that with the total diff
This would also be cool to do automatically with a revision range.
Hmm, can you elaborate?
I assume you mean other revision ranges beyond this patch set?
My script roughly looks like
$ incremental_cli --diff_file=a.diff --lcov_file=coverage.info I can generate a.diff in any way I want.
For these numbers I did
$ git diff clk-next/clk-next > a.diff But I could do $ git diff HEAD~3 > a.diff or anything else.
Just need to make sure the endpoint of the range is the one we generated coverage at so the line #s match up.
So if you have some specific requests, I can get those generated as well.
I would share my incremental_cli script, but it depends on some internal code (an LCOV parser).
I don't quite understand how to use lcov's --diff option, but maybe it supports this?
I just saw "to merge coverage data from different source code levels" in the man page and figured it wasn't relevant.
Quoted 19 lines
Quoted 14 lines
Incremental coverage for 3/9 files in --diff_file Total incremental: 99.29% coverage (281/283 lines)
drivers/clk/clk.c: 84.62% coverage (11/13 lines)drivers/clk/clk_test.c: 100.00% coverage (269/269 lines)include/linux/clk.h: 100.00% coverage (1/1 lines)Missing lines are drivers/clk/clk.c:2397-8, i.e. this part of the diff:
(quoted diff) +4
-0+ if (ret) { + /* rollback the changes */ + clk->min_rate = old_min; <- 2397 + clk->max_rate = old_max; <- 2398Quoted 1 line
These are from before and were just moved around.
We could trigger a failure in the provider when the rate is set, and then we could call
round_rate()again and make sure the boundaries from before are maintained.
Stephen Boyd
maintainerRe: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoting Daniel Latypov (2022-02-24 15:21:57)
Quoted 48 lines · Stephen Boyd
Quoted 20 lines
Quoting Daniel Latypov (2022-02-23 14:50:59)
Quoted 18 lines · Maxime Ripard
Quoted 7 lines
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverageQuoted 7 lines
Quoted 4 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y $ lcov -t "clk_tests" -o coverage.info -c -d .kunit/ --gcov-tool=/usr/bin/gcov-6This is cool. Thanks! Is it possible to add some 'coverage' command to kunit so we don't have to recall this invocation?
This is documented at
https://www.kernel.org/doc/html/latest/dev-tools/kunit/running_tips.html#generating-code-coverage-reports-under-uml
It also includes pointers on how to use lcov to process the .gcda files. I wrote it before --kconfig_add existed, so it just looks a bit different.The main blockers to directly supporting this in
kunit.pyare 1.) this only works on UML
2.) it needs gcc-6 or lower (and the kernel's min version is 5.1, iirc)... 3.) in kernels older than 5.14, this requires some more hacks to get working. So for the large portion of us stuck dealing with somewhat older kernels, we'd have to do stuff manually anyway.For #1, we'd need different kconfig options and kunit.py's QEMU would need some sort of userspace (busybox should be sufficient). For #2, I don't recall what the precise issues were anymore. But I think there were some more issues in gcc 8 or 9... :(
Quoted 2 lines
Quoted 2 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
3) intersected that with the total diff
This would also be cool to do automatically with a revision range.
Hmm, can you elaborate?
I assume you mean other revision ranges beyond this patch set?
I mean somehow to tell kunit.py that I want incremental coverage information for a git revision range so that I can say something like
kunit.py incremental HEAD~3..HEAD
and have it tell me the line coverage.
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 1 line · Stephen Boyd
<snip>
Quoted 30 lines
Quoted 23 lines
Quoted 3 lines
This is cool. Thanks! Is it possible to add some 'coverage' command to kunit so we don't have to recall this invocation?
This is documented at
https://www.kernel.org/doc/html/latest/dev-tools/kunit/running_tips.html#generating-code-coverage-reports-under-uml
It also includes pointers on how to use lcov to process the .gcda files. I wrote it before --kconfig_add existed, so it just looks a bit different.The main blockers to directly supporting this in
kunit.pyare 1.) this only works on UML
2.) it needs gcc-6 or lower (and the kernel's min version is 5.1, iirc)... 3.) in kernels older than 5.14, this requires some more hacks to get working. So for the large portion of us stuck dealing with somewhat older kernels, we'd have to do stuff manually anyway.For #1, we'd need different kconfig options and kunit.py's QEMU would need some sort of userspace (busybox should be sufficient). For #2, I don't recall what the precise issues were anymore. But I think there were some more issues in gcc 8 or 9... :(
Quoted 2 lines
Quoted 2 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
3) intersected that with the total diff
This would also be cool to do automatically with a revision range.
Hmm, can you elaborate?
I assume you mean other revision ranges beyond this patch set?
Quoted 6 lines
I mean somehow to tell
kunit.pythat I want incremental coverage information for a git revision range so that I can say something like
kunit.pyincremental HEAD~3..HEADand have it tell me the line coverage.
Yes, this is doable.
The steps I did were
1. generate coverage.info file per steps above
2. git diff HEAD~ > /tmp/inc.diff
3. <my personal script> --info=coverage.info --diff=/tmp/inc.diff
We'd just change step #2 to be git diff HEAD~3..HEAD > /tmp/inc.diff
As mentioned upthread, unfortunately my personal script in step #3 isn't open source or open sourceable atm.
I wrote it using some internal company code for parsing LCOV .info files out of expediency, but there's nothing too complicated about it. Just need to find what lines were "added" and intersect that w/ the coverage data.
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
In reply to Stephen BoydHi Stephen,
Quoted 14 lines · Stephen Boyd
Quoting Daniel Latypov (2022-02-23 14:50:59)
Quoted 13 lines · Maxime Ripard
Incremental coverage for 3/9 files in --diff_file Total incremental: 99.29% coverage (281/283 lines)
drivers/clk/clk.c: 84.62% coverage (11/13 lines)drivers/clk/clk_test.c: 100.00% coverage (269/269 lines)include/linux/clk.h: 100.00% coverage (1/1 lines)Missing lines are drivers/clk/clk.c:2397-8, i.e. this part of the diff:
(quoted diff) +4
-0+ if (ret) { + /* rollback the changes */ + clk->min_rate = old_min; <- 2397 + clk->max_rate = old_max; <- 2398
Quoted 5 lines
Quoted 1 line
These are from before and were just moved around.
We could trigger a failure in the provider when the rate is set, and then we could call
round_rate()again and make sure the boundaries from before are maintained.
I tried to do that, and it turns out we can't, since we ignore the set_rate return code:
https://elixir.bootlin.com/linux/latest/source/drivers/clk/clk.c#L2107
We could make determine_rate fail, but then clk_round_rate would fail as well and wouldn't allow us to test whether the boundaries are still in place.
Maxime
Stephen Boyd
maintainerRe: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoting Maxime Ripard (2022-02-25 06:26:06)
Quoted 23 lines
Hi Stephen,
Quoted 14 lines · Stephen Boyd
Quoting Daniel Latypov (2022-02-23 14:50:59)
Quoted 13 lines · Maxime Ripard
Incremental coverage for 3/9 files in --diff_file Total incremental: 99.29% coverage (281/283 lines)
drivers/clk/clk.c: 84.62% coverage (11/13 lines)drivers/clk/clk_test.c: 100.00% coverage (269/269 lines)include/linux/clk.h: 100.00% coverage (1/1 lines)Missing lines are drivers/clk/clk.c:2397-8, i.e. this part of the diff:
(quoted diff) +4
-0+ if (ret) { + /* rollback the changes */ + clk->min_rate = old_min; <- 2397 + clk->max_rate = old_max; <- 2398Quoted 5 lines
Quoted 1 line
These are from before and were just moved around.
We could trigger a failure in the provider when the rate is set, and then we could call
round_rate()again and make sure the boundaries from before are maintained.
Quoted 9 lines
I tried to do that, and it turns out we can't, since we ignore the
set_ratereturn code:https://elixir.bootlin.com/linux/latest/source/drivers/clk/clk.c#L2107
We could make
determine_ratefail, but thenclk_round_ratewould fail as well and wouldn't allow us to test whether the boundaries are still in place.
The test could still do it at a high level right? And when/if we decide to bubble up the set_rate failure then we would be testing these lines. Seems like a good idea to implement it with a TODO note that clk.c is ignoring the set_rate clk_op returning failure.
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 34 lines · Stephen Boyd
Quoting Maxime Ripard (2022-02-25 06:26:06)
Quoted 23 lines
Hi Stephen,
Quoted 14 lines · Stephen Boyd
Quoting Daniel Latypov (2022-02-23 14:50:59)
Quoted 13 lines · Maxime Ripard
Incremental coverage for 3/9 files in --diff_file Total incremental: 99.29% coverage (281/283 lines)
drivers/clk/clk.c: 84.62% coverage (11/13 lines)drivers/clk/clk_test.c: 100.00% coverage (269/269 lines)include/linux/clk.h: 100.00% coverage (1/1 lines)Missing lines are drivers/clk/clk.c:2397-8, i.e. this part of the diff:
(quoted diff) +4
-0+ if (ret) { + /* rollback the changes */ + clk->min_rate = old_min; <- 2397 + clk->max_rate = old_max; <- 2398Quoted 5 lines
Quoted 1 line
These are from before and were just moved around.
We could trigger a failure in the provider when the rate is set, and then we could call
round_rate()again and make sure the boundaries from before are maintained.Quoted 9 lines
I tried to do that, and it turns out we can't, since we ignore the
set_ratereturn code:https://elixir.bootlin.com/linux/latest/source/drivers/clk/clk.c#L2107
We could make
determine_ratefail, but thenclk_round_ratewould fail as well and wouldn't allow us to test whether the boundaries are still in place.
Quoted 4 lines
The test could still do it at a high level right? And when/if we decide to bubble up the
set_ratefailure then we would be testing these lines. Seems like a good idea to implement it with a TODO note thatclk.cis ignoring theset_rateclk_opreturning failure.
I'm sorry, but I don't get what I need to implement here
The trivial test for this would be to have a driver with set_rate that returns some error, and then:
KUNIT_ASSERT_LT(test, clk_get_rate(clk), DUMMY_CLOCK_RATE_1); KUNIT_EXPECT_LT(test,
clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2), 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); KUNIT_ASSERT_GT(test, rate, 0); KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 - 1000);
clk_set_rate_range will never return an error code though, and the round_rate tests won't work either because the set_rate error was not propagated, and therefore the boundaries won't be reverted either. So not only the test will fail, but it will also not increase the coverage.
It's really not clear to me what you expect here. Or we should just create it but skip it all the time with a FIXME? But then again, it doesn't increase the coverage, so I'm not sure why it's holding off that series.
Honestly, I'm getting a bit frustrated by all this. This started as a small fix, and now we keep moving the goalposts, with more and more expectations and fixes for things that have nothing related to the original series. And we're now arguing about gaining a few percent of code coverage on some code that without this series has a 0% percent coverage.
Maxime
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
In reply to Daniel LatypovHi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.
Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y
I built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".
Thanks,
Maxime
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 29 lines · Maxime Ripard
Hi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yI built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
Quoted 8 lines
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".
Did you perhaps drop CONFIG_DEBUG_KERNEL=y? Need to add 3 config options in total for coverage.
If I tweak the command I ran above but drop CONFIG_DEBUG_KERNEL=y, I get the error message you get:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y ... Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".
Quoted 3 lines
Thanks,
Maxime
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 45 lines · Daniel Latypov
Quoted 29 lines · Maxime Ripard
Hi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yI built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
Quoted 8 lines
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Did you perhaps drop
CONFIG_DEBUG_KERNEL=y? Need to add 3 config options in total for coverage.If I tweak the command I ran above but drop
CONFIG_DEBUG_KERNEL=y, I get the error message you get:
Quoted 8 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y ... Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".
It looks to me that it's more that DEBUG_INFO isn't enabled.
If I'm running
./tools/testing/kunit/kunit.py config --kunitconfig=drivers/clk
--make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y
--kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yDEBUG_INFO isn't selected and I end up with DEBUG_INFO_NONE. DEBUG_KERNEL is enabled though.
Maxime
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 56 lines · Maxime Ripard
Quoted 45 lines · Daniel Latypov
Quoted 29 lines · Maxime Ripard
Hi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yI built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
Quoted 8 lines
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Did you perhaps drop
CONFIG_DEBUG_KERNEL=y? Need to add 3 config options in total for coverage.If I tweak the command I ran above but drop
CONFIG_DEBUG_KERNEL=y, I get the error message you get:Quoted 8 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y ... Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".
Quoted 1 line
It looks to me that it's more that
DEBUG_INFOisn't enabled.
Sorry for the very delayed response.
I was largely getting internet over mobile data around when this email came in and didn't want to try and download docker images over that.
It looks like that there was another change that is now merged into Linus' tree that causes this.
I found that adding this helped (thanks David Gow)
--kconfig_add=DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Running against --kunitconfig=lib/kunit, my final coverage result is
Overall coverage rate:
lines......: 13.6% (18004 of 132055 lines)
functions..: 15.7% (1885 of 12010 functions)
Can you give that a shot and see if it works?
Daniel
Quoted 11 lines
If I'm running
./tools/testing/kunit/kunit.pyconfig --kunitconfig=drivers/clk--make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y
DEBUG_INFOisn't selected and I end up withDEBUG_INFO_NONE.DEBUG_KERNELis enabled though.Maxime
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Hi,
Quoted 69 lines · Daniel Latypov
Quoted 56 lines · Maxime Ripard
Quoted 45 lines · Daniel Latypov
Quoted 29 lines · Maxime Ripard
Hi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yI built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
Quoted 8 lines
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Did you perhaps drop
CONFIG_DEBUG_KERNEL=y? Need to add 3 config options in total for coverage.If I tweak the command I ran above but drop
CONFIG_DEBUG_KERNEL=y, I get the error message you get:Quoted 8 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y ... Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Quoted 1 line
It looks to me that it's more that
DEBUG_INFOisn't enabled.Sorry for the very delayed response.
I was largely getting internet over mobile data around when this email came in and didn't want to try and download docker images over that.It looks like that there was another change that is now merged into Linus' tree that causes this.
I found that adding this helped (thanks David Gow)
--kconfig_add=DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Quoted 7 lines
Running against --kunitconfig=lib/kunit, my final coverage result is
Overall coverage rate:
lines......: 13.6% (18004 of 132055 lines)
functions..: 15.7% (1885 of 12010 functions)Can you give that a shot and see if it works?
It does fix the configuration issue, but I'm not able to run the tests either:
[07:53:51] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:
$ make ARCH=um olddefconfig O=/home/max/out [07:53:53] Building KUnit Kernel ... Populating config with: $ make ARCH=um olddefconfig O=/home/max/out Building with: $ make ARCH=um --jobs=16 O=/home/max/out [07:54:09] Starting KUnit Kernel (1/1)... [07:54:09] ============================================================ [07:54:09] [ERROR] Test : invalid KTAP input! [07:54:09] ============================================================ [07:54:09] Testing complete. Passed: 0, Failed: 0, Crashed: 0, Skipped: 0, Errors: 1 [07:54:09] Elapsed time: 18.486s total, 2.430s configuring, 16.052s building, 0.003s running
I've tried to remove all the coverage from the equation, and I get the same issue if I only run kunit run from inside the container, but it works fine outside. So I guess it's my setup that is broken. Is there some way to debug what could be going wrong there?
Thanks!
Maxime
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Quoted 100 lines · Maxime Ripard
Hi,
Quoted 69 lines · Daniel Latypov
Quoted 56 lines · Maxime Ripard
Quoted 45 lines · Daniel Latypov
Quoted 29 lines · Maxime Ripard
Hi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yI built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
Quoted 8 lines
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Did you perhaps drop
CONFIG_DEBUG_KERNEL=y? Need to add 3 config options in total for coverage.If I tweak the command I ran above but drop
CONFIG_DEBUG_KERNEL=y, I get the error message you get:Quoted 8 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y ... Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Quoted 1 line
It looks to me that it's more that
DEBUG_INFOisn't enabled.Sorry for the very delayed response.
I was largely getting internet over mobile data around when this email came in and didn't want to try and download docker images over that.It looks like that there was another change that is now merged into Linus' tree that causes this.
I found that adding this helped (thanks David Gow)
--kconfig_add=DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULTQuoted 7 lines
Running against --kunitconfig=lib/kunit, my final coverage result is
Overall coverage rate:
lines......: 13.6% (18004 of 132055 lines)
functions..: 15.7% (1885 of 12010 functions)Can you give that a shot and see if it works?
It does fix the configuration issue, but I'm not able to run the tests either:
[07:53:51] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:$ make ARCH=um olddefconfig O=/home/max/out [07:53:53] Building KUnit Kernel ... Populating config with: $ make ARCH=um olddefconfig O=/home/max/out Building with: $ make ARCH=um --jobs=16 O=/home/max/out [07:54:09] Starting KUnit Kernel (1/1)... [07:54:09] ============================================================ [07:54:09] [ERROR] Test : invalid KTAP input! [07:54:09] ============================================================ [07:54:09] Testing complete. Passed: 0, Failed: 0, Crashed: 0, Skipped: 0, Errors: 1 [07:54:09] Elapsed time: 18.486s total, 2.430s configuring, 16.052s building, 0.003s running
Quoted 4 lines
I've tried to remove all the coverage from the equation, and I get the same issue if I only run kunit run from inside the container, but it works fine outside. So I guess it's my setup that is broken. Is there some way to debug what could be going wrong there?
kunit.py is failing to find any test results from the raw kernel dmesg output. That is stored in $BUILD_DIR/test.log, so /home/max/out/test.log. (You can also have kunit.py print this out instead with kunit.py run --raw_output)
It looks like it's specifically not finding the (K)TAP header.
Here's a snippet of what you'd expect to see:
<bunch of boot stuff>
printk: console [mc-1] enabled
TAP version 14
1..9
# Subtest: clk-test
1..4
ok 1 - clk_test_get_rate
ok 2 - clk_test_set_get_rate
<more kunit output in similar format>
Here's the failing lines in kunit_parser.py
805 def parse_run_tests(kernel_output: Iterable[str]) -> Test:
817 lines = extract_tap_lines(kernel_output) <= lines
after "K?TAP version"
818 test = Test()
819 if not lines:
820 test.add_error('invalid KTAP input!') <= this error msg
821 test.status = TestStatus.FAILURE_TO_PARSE_TESTS
Normally the issue people run into is that KUnit prints a header but has no tests.
That's a different error than what you see here.
It seems like we're either not running this func
206 static void kunit_exec_run_tests(struct suite_set *suite_set) 207 {
208 struct kunit_suite * const * const *suites;
209
210 kunit_print_tap_header(suite_set); <= not hitting this line?
211
212 for (suites = suite_set->start; suites <suite_set->end; suites++)
213 __kunit_test_suites_init(*suites);
214 }
or maybe the output got mangled somehow?
Daniel
Re: [PATCH v6 02/12] clk: Introduce Kunit Tests for the framework
Hi Daniel,
Quoted 103 lines · Daniel Latypov
Quoted 97 lines · Maxime Ripard
Quoted 69 lines · Daniel Latypov
Quoted 56 lines · Maxime Ripard
Quoted 45 lines · Daniel Latypov
Quoted 29 lines · Maxime Ripard
Hi Daniel,
Quoted 14 lines · Daniel Latypov
Quoted 7 lines · Maxime Ripard
Let's test various parts of the rate-related clock API with the kunit testing framework.
Suggested-by Stephen Boyd <[email protected]>Signed-off-by Maxime Ripard <[email protected]>Tested-by Daniel Latypov <[email protected]>Looks good to me on the KUnit side.
Two small nits below.Quoted 7 lines
FYI, I computed the incremental coverage for this series, i.e.:
1) applied the full series
2) computed the absolute coverage$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_KERNEL=y --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=yI built a docker container based on ubuntu 18.04 to have gcc6 and python3.7, but this doesn't seem to be working, I'm not entirely sure why:
Quoted 8 lines
[13:11:22] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:$ make ARCH=um olddefconfig CC=/usr/bin/gcc-6 O=.kunit ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Did you perhaps drop
CONFIG_DEBUG_KERNEL=y? Need to add 3 config options in total for coverage.If I tweak the command I ran above but drop
CONFIG_DEBUG_KERNEL=y, I get the error message you get:Quoted 8 lines
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk --make_options=CC=/usr/bin/gcc-6 --kconfig_add=CONFIG_DEBUG_INFO=y --kconfig_add=CONFIG_GCOV=y ... Missing: CONFIG_DEBUG_INFO=y, CONFIG_GCOV=y Note: many Kconfig options aren't available on UML. You can try running on a different architecture with something like "--arch=x86_64".Quoted 1 line
It looks to me that it's more that
DEBUG_INFOisn't enabled.Sorry for the very delayed response.
I was largely getting internet over mobile data around when this email came in and didn't want to try and download docker images over that.It looks like that there was another change that is now merged into Linus' tree that causes this.
I found that adding this helped (thanks David Gow)
--kconfig_add=DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULTQuoted 7 lines
Running against --kunitconfig=lib/kunit, my final coverage result is
Overall coverage rate:
lines......: 13.6% (18004 of 132055 lines)
functions..: 15.7% (1885 of 12010 functions)Can you give that a shot and see if it works?
It does fix the configuration issue, but I'm not able to run the tests either:
[07:53:51] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:$ make ARCH=um olddefconfig O=/home/max/out [07:53:53] Building KUnit Kernel ... Populating config with: $ make ARCH=um olddefconfig O=/home/max/out Building with: $ make ARCH=um --jobs=16 O=/home/max/out [07:54:09] Starting KUnit Kernel (1/1)... [07:54:09] ============================================================ [07:54:09] [ERROR] Test : invalid KTAP input! [07:54:09] ============================================================ [07:54:09] Testing complete. Passed: 0, Failed: 0, Crashed: 0, Skipped: 0, Errors: 1 [07:54:09] Elapsed time: 18.486s total, 2.430s configuring, 16.052s building, 0.003s runningQuoted 4 lines
I've tried to remove all the coverage from the equation, and I get the same issue if I only run kunit run from inside the container, but it works fine outside. So I guess it's my setup that is broken. Is there some way to debug what could be going wrong there?
Quoted 4 lines
kunit.pyis failing to find any test results from the raw kernel dmesg output. That is stored in $BUILD_DIR/test.log, so/home/max/out/test.log. (You can also havekunit.pyprint this out instead withkunit.py run --raw_output)
I was missing CAP_SYS_PTRACE in my container, once set it works just fine, thanks! Maxime
PATCH v6 3/12 clk: Enforce that disjoints limits are invalid
In reply to Maxime RipardIf we were to have two users of the same clock, doing something like:
clk_set_rate_range(user1, 1000, 2000);clk_set_rate_range(user2, 3000, 4000);
The second call would fail with -EINVAL, preventing from getting in a situation where we end up with impossible limits.
However, this is never explicitly checked against and enforced, and works by relying on an undocumented behaviour of clk_set_rate().
Indeed, on the first clk_set_rate_range will make sure the current clock rate is within the new range, so it will be between 1000 and 2000Hz. On the second clk_set_rate_range(), it will consider (rightfully), that our current clock is outside of the 3000-4000Hz range, and will call clk_core_set_rate_nolock() to set it to 3000Hz.
clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will eventually check that our rate 3000Hz rate is outside the min 3000Hz max 2000Hz range, will bail out, the error will propagate and we'll eventually return -EINVAL.
This solely relies on the fact that clk_calc_new_rates(), and in particular clk_core_determine_round_nolock(), won't modify the new rate allowing the error to be reported. That assumption won't be true for all drivers, and most importantly we'll break that assumption in a later patch.
It can also be argued that we shouldn't even reach the point where we're calling clk_core_set_rate_nolock().
Let's make an explicit check for disjoints range before we're doing anything.
--- drivers/clk/clk.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
drivers/clk/clk.c +24 -0
@@ -632,6 +632,24 @@ static void clk_core_get_boundaries(struct clk_core *core, *max_rate =min (*max_rate, clk_user->max_rate); } +static bool clk_core_check_boundaries (struct clk_core *core, +unsigned long min_rate, +unsigned long max_rate) +{ +struct clk *user; + +lockdep_assert_held (&prepare_lock); + +if (min_rate > core->max_rate || max_rate < core->min_rate) +return false; + +hlist_for_each_entry (user, &core->clks, clks_node) +if (min_rate > user->max_rate || max_rate < user->min_rate) +return false; + +return true; +} +void clk_hw_set_rate_range (struct clk_hw *hw,unsigned long min_rate,unsigned long max_rate) {
@@ -2348,6 +2366,11 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) clk->min_rate = min; clk->max_rate = max; +if (!clk_core_check_boundaries (clk->core, min, max)) { + ret = -EINVAL ; + goto out; + } + rate =clk_core_get_rate_nolock (clk->core);if (rate < min || rate > max) {/*
@@ -2376,6 +2399,7 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) } } +out:if (clk->exclusive_count)clk_core_rate_protect (clk->core);
Signature · 1 line
2.35.1
PATCH v6 4/12 clk: Always clamp the rounded rate
In reply to Maxime RipardThe current core while setting the min and max rate properly in the clk_request structure will not make sure that the requested rate is within these boundaries, leaving it to each and every driver to make sure it is.
It's not clear if this was on purpose or not, but this introduces some inconsistencies within the API.
For example, a user setting a range and then calling clk_round_rate() with a value outside of that range will get the same value back (ignoring any driver adjustements), effectively ignoring the range that was just set.
Another one, arguably worse, is that it also makes clk_round_rate() and clk_set_rate() behave differently if there's a range and the rate being used for both is outside that range. As we have seen, the rate will be returned unchanged by clk_round_rate(), but clk_set_rate() will error out returning -EINVAL.
Let's make sure the framework will always clamp the rate to the current range found on the clock, which will fix both these inconsistencies.
--- drivers/clk/clk.c | 2 ++ drivers/clk/clk_test.c | 46 +++++++++++++++++++++++++----------------- 2 files changed, 30 insertions(+), 18 deletions(-)
drivers/clk/clk.c +2 -0
@@ -1348,6 +1348,8 @@ static int clk_core_determine_round_nolock(struct clk_core *core,if (!core)return 0 ; + req->rate =clamp (req->rate, req->min_rate, req->max_rate); +/* * At this point, core protection will be disabled * - if the provider is not protected at all
drivers/clk/clk_test.c +28 -18
130 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v6 5/12 clk: Use clamp instead of open-coding our own
In reply to Maxime RipardThe code in clk_set_rate_range() will, if the current rate is outside of the new range, will force it to the minimum or maximum.
Since it's running under the condition that the rate is either lower than the minimum, or higher than the maximum, this is equivalent to using clamp, while being less readable. Let's switch to using clamp instead.
--- drivers/clk/clk.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/clk/clk.c +1 -5
@@ -2388,11 +2388,7 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)* this corner case when determining the rate */ -if (rate < min) - rate = min; -else - rate = max; - + rate =clamp (clk->core->req_rate, min, max); ret =clk_core_set_rate_nolock (clk->core, rate);if (ret) {/* rollback the changes */
Signature · 1 line
2.35.1
Stephen Boyd
maintainerRe: [PATCH v6 05/12] clk: Use clamp instead of open-coding our own
Quoting Maxime Ripard (2022-02-23 02:55:53)
Quoted 2 lines
The code in
clk_set_rate_range()will, if the current rate is outside of the new range, will force it to the minimum or maximum.
s/will//
Quoted 27 lines
Since it's running under the condition that the rate is either lower than the minimum, or higher than the maximum, this is equivalent to using clamp, while being less readable. Let's switch to using clamp instead.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/clk/clk.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)drivers/clk/clk.c +1
-5@@ -2388,11 +2388,7 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)* this corner case when determining the rate */ -if (rate < min) - rate = min; -else - rate = max; - + rate =clamp (clk->core->req_rate, min, max); ret =clk_core_set_rate_nolock (clk->core, rate);if (ret) {
PATCH v6 6/12 clk: Always set the rate on clk_set_range_rate
In reply to Maxime RipardWhen we change a clock minimum or maximum using clk_set_rate_range(), clk_set_min_rate() or clk_set_max_rate(), the current code will only trigger a new rate change if the rate is outside of the new boundaries.
However, a clock driver might want to always keep the clock rate to one of its boundary, for example the minimum to keep the power consumption as low as possible.
Since they don't always get called though, clock providers don't have the opportunity to implement this behaviour.
Let's trigger a clk_set_rate() on the previous requested rate every time clk_set_rate_range() is called. That way, providers that care about the new boundaries have a chance to adjust the rate, while providers that don't care about those new boundaries will return the same rate than before, which will be ignored by clk_set_rate() and won't result in a new rate change.
--- drivers/clk/clk.c | 45 ++++++++++++++++---------------- drivers/clk/clk_test.c | 58 +++++++++++++++++++----------------------- 2 files changed, 49 insertions(+), 54 deletions(-)
drivers/clk/clk.c +23 -22
@@ -2373,28 +2373,29 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) goto out; } - rate =clk_core_get_rate_nolock (clk->core); -if (rate < min || rate > max) { -/* -* FIXME: -* We are in bit of trouble here, current rate is outside the -* the requested range. We are going try to request appropriate -* range boundary but there is a catch. It may fail for the -* usual reason (clock broken, clock protected, etc) but also -* because: -* - round_rate() was not favorable and fell on the wrong -* side of the boundary -* - the determine_rate() callback does not really check for -* this corner case when determining the rate -*/ - - rate =clamp (clk->core->req_rate, min, max); - ret =clk_core_set_rate_nolock (clk->core, rate); -if (ret) { -/* rollback the changes */ - clk->min_rate = old_min; - clk->max_rate = old_max; - } +/* +* Since the boundaries have been changed, let's give the +* opportunity to the provider to adjust the clock rate based on +* the new boundaries. +* +* We also need to handle the case where the clock is currently +* outside of the boundaries. Clamping the last requested rate +* to the current minimum and maximum will also handle this. +* +* FIXME: +* There is a catch. It may fail for the usual reason (clock +* broken, clock protected, etc) but also because: +* - round_rate() was not favorable and fell on the wrong +* side of the boundary +* - the determine_rate() callback does not really check for +* this corner case when determining the rate +*/ + rate =clamp (clk->core->req_rate, min, max); + ret =clk_core_set_rate_nolock (clk->core, rate); +if (ret) { +/* rollback the changes */ + clk->min_rate = old_min; + clk->max_rate = old_max; } out:
drivers/clk/clk_test.c +26 -32
104 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v6 7/12 clk: Add clk_drop_range
In reply to Maxime RipardIn order to reset the range on a clock, we need to call clk_set_rate_range with a minimum of 0 and a maximum of ULONG_MAX. Since it's fairly inconvenient, let's introduce a clk_drop_range() function that will do just this.
--- drivers/clk/clk_test.c | 4 ++-- include/linux/clk.h | 11 +++++++++++ 2 files changed, 13 insertions(+), 2 deletions(-)
drivers/clk/clk_test.c +2 -2
@@ -640,7 +640,7 @@ static void clk_range_test_multiple_set_range_rate_maximized(struct kunit *test)KUNIT_EXPECT_EQ (test, rate,DUMMY_CLOCK_RATE_1 );KUNIT_ASSERT_EQ (test, -clk_set_rate_range (user2,0 ,ULONG_MAX ), +clk_drop_range (user2),0 ); rate =clk_get_rate (clk);
@@ -757,7 +757,7 @@ static void clk_range_test_multiple_set_range_rate_minimized(struct kunit *test)KUNIT_EXPECT_EQ (test, rate,DUMMY_CLOCK_RATE_2 );KUNIT_ASSERT_EQ (test, -clk_set_rate_range (user2,0 ,ULONG_MAX ), +clk_drop_range (user2),0 ); rate =clk_get_rate (clk);
include/linux/clk.h +11 -0
@@ -986,6 +986,17 @@ static inline void clk_bulk_disable_unprepare(int num_clks,clk_bulk_unprepare (num_clks, clks); } +/** +* clk_drop_range - Reset any range set on that clock +* @clk: clock source +* +* Returns success (0) or negative errno. +*/ +static inline int clk_drop_range (struct clk *clk) +{ +return clk_set_rate_range (clk,0 ,ULONG_MAX ); +} +/** * clk_get_optional - lookup and obtain a reference to an optional clock * producer.
Signature · 1 line
2.35.1
PATCH v6 8/12 clk: bcm: rpi: Add variant structure
In reply to Maxime RipardWe only export a bunch of firmware clocks, and some of them require special treatment.
This has been do so far using some tests on the clock id in various places, but this is fairly hard to extend and doesn't scale very well.
Since we'll need some more cases in the next patches, let's switch to a variant structure that defines the behaviour we need to have for a given clock.
--- drivers/clk/bcm/clk-raspberrypi.c | 62 +++++++++++++++++++++++-------- 1 file changed, 46 insertions(+), 16 deletions(-)
drivers/clk/bcm/clk-raspberrypi.c +46 -16
@@ -56,6 +56,8 @@ static char *rpi_firmware_clk_names[] = {#define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0)#define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1) +struct raspberrypi_clk_variant ; +struct raspberrypi_clk {struct device *dev;struct rpi_firmware *firmware;
@@ -66,10 +68,36 @@ struct raspberrypi_clk_data {struct clk_hw hw;unsigned int id; +struct raspberrypi_clk_variant *variant;struct raspberrypi_clk *rpi; }; +struct raspberrypi_clk_variant { +bool export; +char *clkdev; +}; + +static struct raspberrypi_clk_variant +raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID ] = { + [RPI_FIRMWARE_ARM_CLK_ID ] = { + .export = true, + .clkdev ="cpu0" , + }, + [RPI_FIRMWARE_CORE_CLK_ID ] = { + .export = true, + }, + [RPI_FIRMWARE_M2MC_CLK_ID ] = { + .export = true, + }, + [RPI_FIRMWARE_V3D_CLK_ID ] = { + .export = true, + }, + [RPI_FIRMWARE_PIXEL_BVB_CLK_ID ] = { + .export = true, + }, +}; +/* * Structure of the message passed to Raspberry Pi's firmware in order to * change clock rates. The 'disable_turbo' option is only available to the ARM
@@ -183,7 +211,8 @@ static const struct clk_ops raspberrypi_firmware_clk_ops = {static struct clk_hw *raspberrypi_clk_register (struct raspberrypi_clk *rpi,unsigned int parent, -unsigned int id) +unsigned int id, +struct raspberrypi_clk_variant *variant) {struct raspberrypi_clk_data *data;struct clk_init_data init = {};
@@ -195,6 +224,7 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,return ERR_PTR (-ENOMEM ); data->rpi = rpi; data->id = id; + data->variant = variant; init.name = devm_kasprintf(rpi->dev, GFP_KERNEL, "fw-clk-%s",
@@ -228,9 +258,9 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,clk_hw_set_rate_range (&data->hw, min_rate, max_rate); -if (id ==RPI_FIRMWARE_ARM_CLK_ID ) { +if (variant->clkdev) { ret =devm_clk_hw_register_clkdev (rpi->dev, &data->hw, -NULL ,"cpu0" ); +NULL , variant->clkdev);if (ret) {dev_err (rpi->dev,"Failed to initialize clkdev\n" );return ERR_PTR (ret);
@@ -264,27 +294,27 @@ static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,return ret;while (clks->id) { -struct clk_hw *hw; +struct raspberrypi_clk_variant *variant; + +if (clks->id >RPI_FIRMWARE_NUM_CLK_ID ) { +dev_err (rpi->dev,"Unknown clock id: %u" , clks->id); +return -EINVAL ; + } + + variant = &raspberrypi_clk_variants[clks->id]; +if (variant->export) { +struct clk_hw *hw; -switch (clks->id) { -case RPI_FIRMWARE_ARM_CLK_ID : -case RPI_FIRMWARE_CORE_CLK_ID : -case RPI_FIRMWARE_M2MC_CLK_ID : -case RPI_FIRMWARE_V3D_CLK_ID : -case RPI_FIRMWARE_PIXEL_BVB_CLK_ID : hw =raspberrypi_clk_register (rpi, clks->parent, - clks->id); + clks->id, variant);if (IS_ERR (hw))return PTR_ERR (hw); data->hws[clks->id] = hw; data->num = clks->id +1 ; - fallthrough; - -default : - clks++; -break ; } + + clks++; }return 0 ;
Signature · 1 line
2.35.1
PATCH v6 9/12 clk: bcm: rpi: Set a default minimum rate
In reply to Maxime RipardThe M2MC clock provides the state machine clock for both HDMI controllers.
However, if no HDMI monitor is plugged in at boot, its clock rate will be left at 0 by the firmware and will make any register access end up in a CPU stall, even though the clock was enabled.
We had some code in the HDMI controller to deal with this before, but it makes more sense to have it in the clock driver. Move it there.
--- drivers/clk/bcm/clk-raspberrypi.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
drivers/clk/bcm/clk-raspberrypi.c +26 -0
@@ -76,6 +76,7 @@ struct raspberrypi_clk_data {struct raspberrypi_clk_variant {bool export;char *clkdev; +unsigned long min_rate; }; static struct raspberrypi_clk_variant
@@ -89,6 +90,18 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = { }, [RPI_FIRMWARE_M2MC_CLK_ID] = { .export = true, + +/* +* If we boot without any cable connected to any of the +* HDMI connector, the firmware will skip the HSM +* initialization and leave it with a rate of 0, +* resulting in a bus lockup when we're accessing the +* registers even if it's enabled. +* +* Let's put a sensible default so that we don't end up +* in this situation. +*/ + .min_rate = 120000000, }, [RPI_FIRMWARE_V3D_CLK_ID] = { .export = true,
@@ -267,6 +280,19 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, } } +if (variant->min_rate) { +unsigned long rate; + +clk_hw_set_rate_range (&data->hw, variant->min_rate, max_rate); + + rate =raspberrypi_fw_get_rate (&data->hw,0 ); +if (rate < variant->min_rate) { + ret =raspberrypi_fw_set_rate (&data->hw, variant->min_rate,0 ); +if (ret) +return ERR_PTR (ret); + } + } +return &data->hw; }
Signature · 1 line
2.35.1
PATCH v6 10/12 clk: bcm: rpi: Run some clocks at the minimum rate allowed
In reply to Maxime RipardThe core clock and M2MC clocks are shared between some devices (Unicam controllers and the HVS, and the HDMI controllers, respectively) that will have various, varying, requirements depending on their current work load.
Since those loads can require a fairly high clock rate in extreme conditions (up to ~600MHz), we can end up running those clocks at their maximum frequency even though we no longer require such a high rate.
Fortunately, those devices don't require an exact rate but a minimum rate, and all the drivers are using clk_set_min_rate. Thus, we can just rely on the fact that the clk_request minimum (which is the aggregated minimum of all the clock users) is what we want at all times.
--- drivers/clk/bcm/clk-raspberrypi.c | 37 +++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+)
drivers/clk/bcm/clk-raspberrypi.c +37 -0
@@ -77,6 +77,7 @@ struct raspberrypi_clk_variant {bool export;char *clkdev;unsigned long min_rate; +bool minimize; }; static struct raspberrypi_clk_variant
@@ -87,6 +88,18 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = { }, [RPI_FIRMWARE_CORE_CLK_ID] = { .export = true, + +/* +* The clock is shared between the HVS and the CSI +* controllers, on the BCM2711 and will change depending +* on the pixels composited on the HVS and the capture +* resolution on Unicam. +* +* Since the rate can get quite large, and we need to +* coordinate between both driver instances, let's +* always use the minimum the drivers will let us. +*/ + .minimize = true, }, [RPI_FIRMWARE_M2MC_CLK_ID] = { .export = true,
@@ -102,6 +115,16 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = {* in this situation. */ .min_rate = 120000000, + +/* +* The clock is shared between the two HDMI controllers +* on the BCM2711 and will change depending on the +* resolution output on each. Since the rate can get +* quite large, and we need to coordinate between both +* driver instances, let's always use the minimum the +* drivers will let us. +*/ + .minimize = true, }, [RPI_FIRMWARE_V3D_CLK_ID] = { .export = true,
@@ -206,12 +229,26 @@ static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,static int raspberrypi_fw_dumb_determine_rate (struct clk_hw *hw,struct clk_rate_request *req) { +struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); +struct raspberrypi_clk_variant *variant = data->variant; +/* * The firmware will do the rounding but that isn't part of * the interface with the firmware, so we just do our best * here. */ + req->rate =clamp (req->rate, req->min_rate, req->max_rate); + +/* +* We want to aggressively reduce the clock rate here, so let's +* just ignore the requested rate and return the bare minimum +* rate we can get away with. +*/ +if (variant->minimize && req->min_rate >0 ) + req->rate = req->min_rate; +return 0 ; }
Signature · 1 line
2.35.1
PATCH v6 11/12 drm/vc4: Add logging and comments
In reply to Maxime RipardThe HVS core clock isn't really obvious, so let's add a bunch more comments and some logging for easier debugging.
--- drivers/gpu/drm/vc4/vc4_kms.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/gpu/drm/vc4/vc4_kms.c +11 -0
@@ -389,8 +389,15 @@ static void vc4_atomic_commit_tail(struct drm_atomic_state *state)500000000 , new_hvs_state->core_clock_rate); +drm_dbg (dev,"Raising the core clock at %lu Hz\n" , core_rate); + +/* +* Do a temporary request on the core clock during the +* modeset. +*/ clk_set_min_rate (hvs->core_clk, core_rate); } +drm_atomic_helper_commit_modeset_disables (dev, state);vc4_ctm_commit (vc4, state);
@@ -416,6 +423,10 @@ static void vc4_atomic_commit_tail(struct drm_atomic_state *state)drm_dbg (dev,"Running the core clock at %lu Hz\n" , new_hvs_state->core_clock_rate); +/* +* Request a clock rate based on the current HVS +* requirements. +*/ clk_set_min_rate (hvs->core_clk, new_hvs_state->core_clock_rate); } }
Signature · 1 line
2.35.1
PATCH v6 12/12 drm/vc4: hdmi: Remove clock rate initialization
In reply to Maxime RipardNow that the clock driver makes sure we never end up with a rate of 0, the HDMI driver doesn't need to care anymore.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 13 ------------- 1 file changed, 13 deletions(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +0 -13
@@ -2576,19 +2576,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) vc4_hdmi->disable_4kp60 = true; } -/* -* If we boot without any cable connected to the HDMI connector, -* the firmware will skip the HSM initialization and leave it -* with a rate of 0, resulting in a bus lockup when we're -* accessing the registers even if it's enabled. -* -* Let's put a sensible default at runtime_resume so that we -* don't end up in this situation. -*/ - ret =clk_set_min_rate (vc4_hdmi->hsm_clock,HSM_MIN_CLOCK_FREQ ); -if (ret) - goto err_put_ddc; -/* * We need to have the device powered up at this point to call * our reset hook and for the CEC init.
Signature · 1 line
2.35.1