FUSE: Implement atomic lookup + open
Subsystems (2)
cover FUSE: Implement atomic lookup + open
FUSE, as of now, makes aggressive lookup calls into libfuse in certain code paths. These lookup calls possibly can be avoided in some cases. Incoming two patches addresses the issue of aggressive lookup calls.
First patch handles the case where we open first time a file/dir or create a file (O_CREAT) but do a lookup first on it. After lookup is performed we make another call into libfuse to open the file. Now these two separate calls into libfuse can be combined and performed as a single call into libfuse.
Second patch handles the case when we are opening an already existing file (positive dentry). Before this open call, we re-validate the inode and this re-validation does a lookup on the file and verify the inode. This separate lookup also can be avoided (for non-dir) and combined with open call into libfuse.
Here is the link to libfuse patches which implement atomic open
https://github.com/d-hans/libfuse/commit/5255ce89decac71912e25b3cb4d79ebac538a456
https://github.com/d-hans/libfuse/commit/346b9feb2de5b6ff2b15882a38d7de0a0768c17c
https://github.com/d-hans/libfuse/commit/ac010dac446a9267b619afb138ab315d6c6eeb3e
Dharmendra Singh (2):
FUSE: Implement atomic lookup + open
FUSE: Avoid lookup in d_revalidate()
fs/fuse/dir.c | 170 +++++++++++++++++++++++++++++++++----- fs/fuse/file.c | 30 ++++++- fs/fuse/fuse_i.h | 13 ++- fs/fuse/inode.c | 4 +- fs/fuse/ioctl.c | 2 +- include/uapi/linux/fuse.h | 2 + 6 files changed, 195 insertions(+), 26 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/2 FUSE: Implement atomic lookup + open
From: Dharmendra Singh <[email protected]>
There are couple of places in FUSE where we do agressive lookup.
1) When we go for creating a file (O_CREAT), we do lookup for non-existent file. It is very much likely that file does not exists yet as O_CREAT is passed to open(). This lookup can be avoided and can be performed as part of open call into libfuse.
2) When there is normal open for file/dir (dentry is new/negative). In this case since we are anyway going to open the file/dir with USER space, avoid this separate lookup call into libfuse and combine it with open.
This lookup + open in single call to libfuse and finally to USER space has been named as atomic open. It is expected that USER space open the file and fills in the attributes which are then used to make inode stand/revalidate in the kernel cache.
--- fs/fuse/dir.c | 105 ++++++++++++++++++++++++++++++-------- fs/fuse/fuse_i.h | 3 ++ fs/fuse/inode.c | 4 +- include/uapi/linux/fuse.h | 2 + 4 files changed, 93 insertions(+), 21 deletions(-)
fs/fuse/dir.c +85 -20
@@ -516,16 +516,14 @@ static int get_security_context(struct dentry *entry, umode_t mode, }/* -* Atomic create+open operation -* -* If the filesystem doesn't support this, then fall back to separate -* 'mknod' + 'open' requests. +* Perform create + open or lookup + open in single call to libfuse */ -static int fuse_create_open (struct inode *dir,struct dentry *entry, -struct file *file,unsigned int flags, -umode_t mode) +static int fuse_atomic_open_common (struct inode *dir,struct dentry *entry, +struct dentry **alias,struct file *file, +unsigned int flags,umode_t mode, +uint32_t opcode) { -int err; +bool create = (opcode ==FUSE_CREATE ? true : false);struct inode *inode;struct fuse_mount *fm =get_fuse_mount (dir);FUSE_ARGS (args);
@@ -535,11 +533,16 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry,struct fuse_entry_out outentry;struct fuse_inode *fi;struct fuse_file *ff; +struct dentry *res =NULL ;void *security_ctx =NULL ;u32 security_ctxlen; +int err; + +if (alias) + *alias =NULL ;/* Userspace expects S_IFREG in create mode */ -BUG_ON ((mode &S_IFMT ) !=S_IFREG ); +BUG_ON (create && (mode &S_IFMT ) !=S_IFREG ); forget =fuse_alloc_forget (); err = -ENOMEM ;
@@ -554,7 +557,13 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry,if (!fm->fc->dont_mask) mode &= ~current_umask (); - flags &= ~O_NOCTTY ; +if (!create) { + flags = flags & ~(O_CREAT |O_EXCL |O_NOCTTY ); +if (!fm->fc->atomic_o_trunc) + flags &= ~O_TRUNC ; + }else { + flags &= ~O_NOCTTY ; + }memset (&inarg,0 ,sizeof (inarg));memset (&outentry,0 ,sizeof (outentry)); inarg.flags = flags;
@@ -566,7 +575,7 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, inarg.open_flags |=FUSE_OPEN_KILL_SUIDGID ; } - args.opcode =FUSE_CREATE ; + args.opcode = opcode; args.nodeid =get_node_id (dir); args.in_numargs =2 ; args.in_args[0 ].size =sizeof (inarg);
@@ -595,8 +604,12 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry,if (err) goto out_free_ff; + err = -ENOENT ; +if (!S_ISDIR (outentry.attr.mode) && !outentry.nodeid) + goto out_free_ff; + err = -EIO ; -if (!S_ISREG (outentry.attr.mode) ||invalid_nodeid (outentry.nodeid) || +if (invalid_nodeid (outentry.nodeid) ||fuse_invalid_attr (&outentry.attr)) goto out_free_ff;
@@ -612,10 +625,29 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, err = -ENOMEM ; goto out_err; } +/* +* Close the file in user space, but do not unlink it, if it was +* created - with network file systems other clients might have +* already accessed it. +*/ + res =d_splice_alias (inode, entry); +if (res) { +if (IS_ERR (res)) { + fi =get_fuse_inode (inode); +fuse_sync_release (fi, ff, flags); +fuse_queue_forget (fm->fc, forget, outentry.nodeid,1 ); + err =PTR_ERR (res); + goto out_err; + }else { + entry = res; +if (alias) + *alias = res; + } + }kfree (forget); -d_instantiate (entry, inode);fuse_change_entry_timeout (entry, &outentry); -fuse_dir_changed (dir); +if (create) +fuse_dir_changed (dir); err =finish_open (file, entry, generic_file_open);if (err) { fi =get_fuse_inode (inode);
@@ -634,20 +666,49 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry,return err; } +/* +* Atomic lookup + open +*/ + +static int fuse_do_atomic_open (struct inode *dir,struct dentry *entry, +struct dentry **alias,struct file *file, +unsigned int flags,umode_t mode) +{ +int err; +struct fuse_conn *fc =get_fuse_conn (dir); + +if (!fc->do_atomic_open) +return -ENOSYS ; + err =fuse_atomic_open_common (dir, entry, alias, file, + flags, mode,FUSE_ATOMIC_OPEN ); +return err; +} +static int fuse_mknod (struct user_namespace *,struct inode *,struct dentry *,umode_t ,dev_t );static int fuse_atomic_open (struct inode *dir,struct dentry *entry,struct file *file,unsigned flags,umode_t mode) { -int err; +bool create = (flags &O_CREAT ) ? true : false;struct fuse_conn *fc =get_fuse_conn (dir); -struct dentry *res =NULL ; +struct dentry *res =NULL , *alias =NULL ; +int err;if (fuse_is_bad (dir))return -EIO ; -if (d_in_lookup (entry)) { +/* Atomic lookup + open - dentry might be File or Directory */ +if (!create) { + err =fuse_do_atomic_open (dir, entry, &alias, file, flags, mode); + res = alias; +if (!err) + goto out_dput; +else if (err != -ENOSYS ) + goto no_open; + } +/* ENOSYS fall back - user space does not have full atomic open */ +if (!create &&d_in_lookup (entry)) { res =fuse_lookup (dir, entry,0 );if (IS_ERR (res))return PTR_ERR (res);
@@ -656,7 +717,7 @@ static int fuse_atomic_open(struct inode *dir, struct dentry *entry, entry = res; } -if (!(flags &O_CREAT ) ||d_really_is_positive (entry)) +if (!create ||d_really_is_positive (entry)) goto no_open;/* Only creates */
@@ -664,8 +725,12 @@ static int fuse_atomic_open(struct inode *dir, struct dentry *entry,if (fc->no_create) goto mknod; - - err =fuse_create_open (dir, entry, file, flags, mode); +/* +* If the filesystem doesn't support atomic create + open, then fall +* back to separate 'mknod' + 'open' requests. +*/ + err =fuse_atomic_open_common (dir, entry,NULL , file, flags, mode, +FUSE_CREATE );if (err == -ENOSYS ) { fc->no_create =1 ; goto mknod;
fs/fuse/fuse_i.h +3 -0
@@ -669,6 +669,9 @@ struct fuse_conn {/** Is open/release not implemented by fs? */ unsigned no_open:1; +/** Does the filesystem support atomic open? */ + unsigned do_atomic_open:1; +/** Is opendir/releasedir not implemented by fs? */ unsigned no_opendir:1;
fs/fuse/inode.c +3 -1
@@ -1190,6 +1190,8 @@ static void process_init_reply(struct fuse_mount *fm, struct fuse_args *args, fc->setxattr_ext =1 ;if (flags &FUSE_SECURITY_CTX ) fc->init_security =1 ; +if (arg->flags &FUSE_DO_ATOMIC_OPEN ) + fc->do_atomic_open =1 ; }else { ra_pages = fc->max_read /PAGE_SIZE ; fc->no_lock =1 ;
@@ -1235,7 +1237,7 @@ void fuse_send_init(struct fuse_mount *fm)FUSE_ABORT_ERROR |FUSE_MAX_PAGES |FUSE_CACHE_SYMLINKS |FUSE_NO_OPENDIR_SUPPORT |FUSE_EXPLICIT_INVAL_DATA |FUSE_HANDLE_KILLPRIV_V2 |FUSE_SETXATTR_EXT |FUSE_INIT_EXT | -FUSE_SECURITY_CTX ; +FUSE_SECURITY_CTX |FUSE_DO_ATOMIC_OPEN ;#ifdef CONFIG_FUSE_DAX if (fm->fc->dax) flags |=FUSE_MAP_ALIGNMENT ;
include/uapi/linux/fuse.h +2 -0
@@ -389,6 +389,7 @@ struct fuse_file_lock {/* bits 32..63 get shifted down 32 bits into the flags2 field */ #define FUSE_SECURITY_CTX (1ULL << 32)#define FUSE_HAS_INODE_DAX (1ULL << 33) +#define FUSE_DO_ATOMIC_OPEN (1ULL << 34)/** * CUSE INIT request/reply flags
@@ -537,6 +538,7 @@ enum fuse_opcode {FUSE_SETUPMAPPING =48 ,FUSE_REMOVEMAPPING =49 ,FUSE_SYNCFS =50 , +FUSE_ATOMIC_OPEN =51 ,/* CUSE specific operations */ CUSE_INIT = 4096,
Signature · 1 line
2.17.1
PATCH 2/2 FUSE: Avoid lookup in d_revalidate()
In reply to Dharmendra SinghFrom: Dharmendra Singh <[email protected]>
With atomic open + lookup implemented, it is possible to avoid lookups in FUSE d_revalidate() for objects other than directories.
If FUSE is mounted with default permissions then this optimization is not possible as we need to fetch fresh inode attributes for permission check. This lookup skipped in d_revalidate() can be performed as part of open call into libfuse which is made from fuse_file_open(). And when we return from USER space with file opened and fresh attributes, we can revalidate the inode.
--- fs/fuse/dir.c | 81 +++++++++++++++++++++++++++++++++++++++++++----- fs/fuse/file.c | 30 ++++++++++++++++-- fs/fuse/fuse_i.h | 10 +++++- fs/fuse/ioctl.c | 2 +- 4 files changed, 110 insertions(+), 13 deletions(-)
fs/fuse/dir.c +73 -8
@@ -196,6 +196,7 @@ static void fuse_lookup_init(struct fuse_conn *fc, struct fuse_args *args,* the lookup once more. If the lookup results in the same inode, * then refresh the attributes, timeouts and mark the dentry valid. */ +static int fuse_dentry_revalidate (struct dentry *entry,unsigned int flags) {struct inode *inode;
@@ -224,6 +225,17 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) fm =get_fuse_mount (inode); +/* If atomic open is supported by FUSE then use this opportunity +* (only for non-dir) to avoid this lookup and combine +* lookup + open into single call. +*/ +if (!fm->fc->default_permissions && fm->fc->do_atomic_open && + !(flags & (LOOKUP_EXCL |LOOKUP_REVAL )) && + (flags &LOOKUP_OPEN ) && !S_ISDIR (inode->i_mode)) { + ret =1 ; + goto out; + } + forget =fuse_alloc_forget (); ret = -ENOMEM ;if (!forget)
@@ -515,13 +527,50 @@ static int get_security_context(struct dentry *entry, umode_t mode,return err; } +/* +* Revalidate the inode after we got fresh attributes from user space. +*/ +static int fuse_atomic_open_revalidate_inode (struct inode *reval_inode, +struct dentry *entry, +struct fuse_inode *fi, +struct fuse_forget_link *forget, +struct fuse_entry_out *outentry, +u64 attr_version) +{ +struct fuse_conn *fc =get_fuse_conn (reval_inode); +/* Mode should be other than directory */ +BUG_ON (S_ISDIR (reval_inode->i_mode)); + +if (outentry->nodeid !=get_node_id (reval_inode)) { +fuse_queue_forget (fc, forget, outentry->nodeid,1 ); +return -ESTALE ; + } +if (fuse_stale_inode (reval_inode, outentry->generation, + &outentry->attr)) { +fuse_make_bad (reval_inode); +return -ESTALE ; + } + fi =get_fuse_inode (reval_inode); +spin_lock (&fi->lock); + fi->nlookup++; +spin_unlock (&fi->lock); + +forget_all_cached_acls (reval_inode); +fuse_change_attributes (reval_inode, &outentry->attr, +entry_attr_timeout (outentry), attr_version); +fuse_change_entry_timeout (entry, outentry); +return 0 ; +} + + +/* * Perform create + open or lookup + open in single call to libfuse */ -static int fuse_atomic_open_common (struct inode *dir,struct dentry *entry, -struct dentry **alias,struct file *file, -unsigned int flags,umode_t mode, -uint32_t opcode) +int fuse_atomic_open_common (struct inode *dir,struct dentry *entry, +struct dentry **alias,struct file *file, +struct inode *reval_inode,unsigned int flags, +umode_t mode,uint32_t opcode) {bool create = (opcode ==FUSE_CREATE ? true : false);struct inode *inode;
@@ -536,6 +585,7 @@ static int fuse_atomic_open_common(struct inode *dir, struct dentry *entry,struct dentry *res =NULL ;void *security_ctx =NULL ;u32 security_ctxlen; +u64 attr_version =fuse_get_attr_version (fm->fc);int err;if (alias)
@@ -616,6 +666,19 @@ static int fuse_atomic_open_common(struct inode *dir, struct dentry *entry, ff->fh = outopen.fh; ff->nodeid = outentry.nodeid; ff->open_flags = outopen.open_flags; + +/* Inode revalidation was bypassed previously for type other than +* directories, revalidate now as we got fresh attributes. +*/ +if (reval_inode) { + err =fuse_atomic_open_revalidate_inode (reval_inode, entry, fi, + forget, &outentry, + attr_version); +if (err) + goto out_free_ff; + inode = reval_inode; + goto out_finish_open; + } inode =fuse_iget (dir->i_sb, outentry.nodeid, outentry.generation, &outentry.attr,entry_attr_timeout (&outentry),0 );if (!inode) {
@@ -649,6 +712,7 @@ static int fuse_atomic_open_common(struct inode *dir, struct dentry *entry,if (create)fuse_dir_changed (dir); err =finish_open (file, entry, generic_file_open); +out_finish_open:if (err) { fi =get_fuse_inode (inode);fuse_sync_release (fi, ff, flags);
@@ -679,7 +743,7 @@ static int fuse_do_atomic_open(struct inode *dir, struct dentry *entry,if (!fc->do_atomic_open)return -ENOSYS ; - err =fuse_atomic_open_common (dir, entry, alias, file, + err =fuse_atomic_open_common (dir, entry, alias, file,NULL , flags, mode,FUSE_ATOMIC_OPEN );return err; }
@@ -700,7 +764,8 @@ static int fuse_atomic_open(struct inode *dir, struct dentry *entry,/* Atomic lookup + open - dentry might be File or Directory */ if (!create) { - err =fuse_do_atomic_open (dir, entry, &alias, file, flags, mode); + err =fuse_do_atomic_open (dir, entry, &alias, file, + flags, mode); res = alias;if (!err) goto out_dput;
@@ -729,8 +794,8 @@ static int fuse_atomic_open(struct inode *dir, struct dentry *entry,* If the filesystem doesn't support atomic create + open, then fall * back to separate 'mknod' + 'open' requests. */ - err =fuse_atomic_open_common (dir, entry,NULL , file, flags, mode, -FUSE_CREATE ); + err =fuse_atomic_open_common (dir, entry,NULL , file,NULL , flags, + mode,FUSE_CREATE );if (err == -ENOSYS ) { fc->no_create =1 ; goto mknod;
fs/fuse/file.c +27 -3
@@ -125,11 +125,15 @@ static void fuse_file_put(struct fuse_file *ff, bool sync, bool isdir) }struct fuse_file *fuse_file_open (struct fuse_mount *fm,u64 nodeid, -unsigned int open_flags,bool isdir) +struct file *file,unsigned int open_flags, +bool isdir) {struct fuse_conn *fc = fm->fc;struct fuse_file *ff; +struct dentry *dentry =NULL ; +struct dentry *parent =NULL ;int opcode = isdir ?FUSE_OPENDIR :FUSE_OPEN ; +int ret; ff =fuse_file_alloc (fm);if (!ff)
@@ -138,6 +142,11 @@ struct fuse_file *fuse_file_open(struct fuse_mount *fm, u64 nodeid, ff->fh =0 ;/* Default for no-open */ ff->open_flags =FOPEN_KEEP_CACHE | (isdir ?FOPEN_CACHE_DIR :0 ); + +/* For directories we already had lookup */ +if (!isdir && fc->do_atomic_open && file !=NULL ) + goto revalidate_atomic_open; +if (isdir ? !fc->no_opendir : !fc->no_open) {struct fuse_open_out outarg;int err;
@@ -164,12 +173,27 @@ struct fuse_file *fuse_file_open(struct fuse_mount *fm, u64 nodeid, ff->nodeid = nodeid;return ff; + +revalidate_atomic_open: + dentry = file->f_path.dentry; +/* Get ref on parent */ + parent =dget_parent (dentry); + ret =fuse_atomic_open_common (d_inode_rcu (parent), dentry,NULL , file, +d_inode_rcu (dentry), open_flags,0 , +FUSE_ATOMIC_OPEN ); +dput (parent); +if (ret) + goto err_out; + ff = file->private_data; +return ff; +err_out: +return ERR_PTR (ret); }int fuse_do_open (struct fuse_mount *fm,u64 nodeid,struct file *file,bool isdir) { -struct fuse_file *ff =fuse_file_open (fm, nodeid, file->f_flags, isdir); +struct fuse_file *ff =fuse_file_open (fm, nodeid, file, file->f_flags, isdir);if (!IS_ERR (ff)) file->private_data = ff;
@@ -252,7 +276,7 @@ int fuse_open_common(struct inode *inode, struct file *file, bool isdir) } err =fuse_do_open (fm,get_node_id (inode), file, isdir); -if (!err) +if (!err && (!fc->do_atomic_open || isdir))fuse_finish_open (inode, file); out:
fs/fuse/fuse_i.h +9 -1
@@ -1011,6 +1011,13 @@ void fuse_finish_open(struct inode *inode, struct file *file);void fuse_sync_release (struct fuse_inode *fi,struct fuse_file *ff,unsigned int flags); +/** +* Send atomic create + open or lookup + open +*/ +int fuse_atomic_open_common (struct inode *dir,struct dentry *entry, +struct dentry **alias,struct file *file, +struct inode *reval_inode,unsigned int flags, +umode_t mode,uint32_t opcode);/** * Send RELEASE or RELEASEDIR request */
@@ -1314,7 +1321,8 @@ int fuse_fileattr_set(struct user_namespace *mnt_userns,/* file.c */ struct fuse_file *fuse_file_open (struct fuse_mount *fm,u64 nodeid, -unsigned int open_flags,bool isdir); +struct file *file,unsigned int open_flags, +bool isdir);void fuse_file_release (struct inode *inode,struct fuse_file *ff,unsigned int open_flags,fl_owner_t id,bool isdir);
fs/fuse/ioctl.c +1 -1
@@ -408,7 +408,7 @@ static struct fuse_file *fuse_priv_ioctl_prepare(struct inode *inode)if (!S_ISREG (inode->i_mode) && !isdir)return ERR_PTR (-ENOTTY ); -return fuse_file_open (fm,get_node_id (inode),O_RDONLY , isdir); +return fuse_file_open (fm,get_node_id (inode),NULL ,O_RDONLY , isdir); }static void fuse_priv_ioctl_cleanup (struct inode *inode,struct fuse_file *ff)
Signature · 1 line
2.17.1
Miklos Szeredi
maintainerQuoted 4 lines · Dharmendra Singh
FUSE, as of now, makes aggressive lookup calls into libfuse in certain code paths. These lookup calls possibly can be avoided in some cases. Incoming two patches addresses the issue of aggressive lookup calls.
Can you give performance numbers?
Thanks,
Miklos
'Re: [PATCH 0/2] FUSE: Implement atomic lookup + open'
Thanks, Miklos. For measuring the performance, bonnie++ was used over passthrough_ll mount on tmpfs. When taking numbers on vm, I could see non-deterministic behaviour in the results. Therefore core binding was used for passthrough_ll and bonnie++, keeping them on separate cores.
Here are the google sheets having performance numbers.
https://docs.google.com/spreadsheets/d/1JRgF8DTR9xk5zz3_azmLcyy5kW3bgjjItmS8CYsAoT4/edit#gid=0
https://docs.google.com/spreadsheets/d/1JRgF8DTR9xk5zz3_azmLcyy5kW3bgjjItmS8CYsAoT4/edit#gid=1833203226
Following are the libfuse patches(commit on March 7 and March 8 in first link) which were used to test these changes
https://github.com/aakefbs/libfuse/commits/atomic-open-and-no-flush
https://github.com/libfuse/libfuse/pull/644
Parameters used in mounting passthrough_ll:
numactl --localalloc --physcpubind=16-23 passthrough_ll -f -osource=/tmp/source,allow_other,allow_root, cache=never -o max_idle_threads=1 /tmp/dest
(Here cache=never results in direct-io on the file)
Parameters used in bonnie++:
In sheet 0B:
numactl --localalloc --physcpubind=0-7 bonnie++ -x 4 -q -s0 -d /tmp/dest/ -n 10:0:0:10 -r 0 -u 0 2>/dev/null
in sheet 1B:
numactl --localalloc --physcpubind=0-7 bonnie++ -x 4 -q -s0 -d /tmp/dest/ -n 10:1:1:10 -r 0 -u 0 2>/dev/null
Additional settings done on the testing machine:
cpupower frequency-set -g performance
Running bonnie++ gives us results for Create/s, Read/s and Delete/s. Below table summarises the numbers for these three operations. Please note that for read of 0 bytes, bonnie++ does ops in order of create-open, close and stat but no atomic open. Therefore performance results in the sheet 0B had overhead of extra stat calls. Whereas in sheet 1B, we directed bonnie++ to read 1 byte and this triggered atomic open call but numbers for this run involve overhead for read operation itself instead of just plain open/close.
Here is the table summarising the performance numbers
Table: 0B
Sequential | Random
Creat/s Read/s Del/s | Creat/s Read/s Del/s
Patched Libfuse -3.55% -4.9% -4.43% | -0.4% -1.6% -1.0%
Patched Libfuse + No-Flush +22.3% +6% +5.15% | +27.9% +14.5% +2.8%
Patched Libfuse + Patched FuseK +22.9% +6.1% +5.3% | +28.3% +14.5% +2.3%
Patched Libfuse + Patched FuseK + No-Flush +33.4% -4.4% -3.73% | +38.8% -2.5% -2.0%Table: 1B
Sequential | Random
Create/s Read/s Del/s | Create/s Read/s Del/s
Patched Libfuse -0.22% -0.35% -0.7% | -0.27% -0.78% -2.35%
Patched Libfuse + No-Flush +2.5% +2.6% -9.6% | +2.5% -8.6% -6.26%
Patched Libfuse + Patched FuseK +1.63% -1.0% -11.45% | +4.48% -6.84% -4.0%
Patched Libfuse + Patched FuseK + No-Flush +32.43% +26.61% +076% | +33.2% +14.7% -0.40%Here
No-Flush = No flush trigger from fuse kernel into libfuse
In Table 1B, we see 4th row has good improvements for both create and Read whereas Del seems to be almost not changed. In Table 0B, 3rd row we have Read perf reduced, it was found out that this was caused by some changes in libfuse. So this was fixed and in Table 1B, same row, we can see increased numbers.
In Table 0B, 3rd row, we have good numbers because bonnie++ used 0 bytes to read and this changed behaviour and impacted perf whereas for the same row, Table 1B we have reduced numbers because it involved flush calls for 1 byte from the fuse kernel into libfuse.
These changes are not for fuse kernel/users-space context switches only, but our main goal is to have improvement performance for network file systems
- Number network round trips
- Reduce load on meta servers with thousands of clients
Reduced kernel/userspace context switches is 'just' a side effect.
Thanks,
Dharmendra