s390x: Extend instruction interception tests
v4 cover s390x: Extend instruction interception tests
This series extends the instruction interception tests for s390x.
For most instructions, there is already coverage in existing tests, but they are not covering some failure cases, e.g. bad alignment. In this case, the existing tests were extended.
SCK was not under test anywhere yet, hence a new test file was added.
The EPSW test gets it's own file, too, because it requires a I/O device, more details in the respective commit.
Changelog from v3:
----
- make log messages in sck tests unique
- test pmcw reserved bits are indeed stored as zero
- add comments as requested by Janosch
Nico Boehr (8):
s390x: Add more tests for MSCH
s390x: Add test for PFMF low-address protection
s390x: Add sck tests
s390x: Add tests for STCRW
s390x: Add more tests for SSCH
s390x: Add more tests for STSCH
s390x: Add tests for TSCH
s390x: Add EPSW test
lib/s390x/css.h | 17 +++ lib/s390x/css_lib.c | 60 +++++++++ s390x/Makefile | 2 + s390x/css.c | 291 ++++++++++++++++++++++++++++++++++++++++++++ s390x/epsw.c | 113 +++++++++++++++++ s390x/pfmf.c | 29 +++++ s390x/sck.c | 136 +++++++++++++++++++++ s390x/unittests.cfg | 7 ++ 8 files changed, 655 insertions(+) create mode 100644 s390x/epsw.c create mode 100644 s390x/sck.c
Signature · 1 line
2.31.1
PATCH v4 1/8 s390x: Add more tests for MSCH
We already have some coverage for MSCH, but there are more cases to test for:
- invalid SCHIB structure. We cover that by setting reserved bits 0, 1, 6 and 7 in the flags of the PMCW.
Older QEMU versions require this bit to always be zero on msch, which is why this test may fail. A fix is available in QEMU master commit 2df59b73e086 ("s390x/css: fix PMCW invalid mask").
- a pointer to an unaligned SCHIB. We cover misalignment by 1 and 2 bytes. Using pointer to valid memory avoids messing up random memory in case of test failures.
Here's the QEMU PMCW invalid mask fix: https://lists.nongnu.org/archive/html/qemu-s390x/2021-12/msg00100.html
--- s390x/css.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)
s390x/css.c +58 -0
@@ -27,6 +27,8 @@ static int test_device_sid;static struct senseid *senseid;struct ccw1 *ccw; +char alignment_test_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); +static void test_enumerate (void ) { test_device_sid =css_enumerate ();
@@ -331,6 +333,61 @@ static void test_schm_fmt1(void)free_io_mem (mb1,sizeof (struct measurement_block_format1 )); } +static void test_msch (void ) +{ +int invalid_pmcw_flags[] = {0 ,1 ,6 ,7 }; +struct schib test_schib; +uint16_t old_pmcw_flags; +const int align_to =4 ; +int invalid_flag; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + + cc =stsch (test_device_sid, &schib); +if (cc) { +report_fail ("stsch: sch %08x failed with cc=%d" , test_device_sid, cc); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +msch (test_device_sid, (struct schib *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid SCHIB" ); + old_pmcw_flags = schib.pmcw.flags; +for (int i =0 ; i <ARRAY_SIZE (invalid_pmcw_flags); i++) { + invalid_flag = invalid_pmcw_flags[i]; + +report_prefix_pushf ("PMCW flag bit %d set" , invalid_flag); + + schib.pmcw.flags = old_pmcw_flags |BIT (15 - invalid_flag); +expect_pgm_int (); +msch (test_device_sid, &schib); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); + + cc =stsch (test_device_sid, &test_schib); +report (!cc,"STSCH succeeded" ); +report (!(test_schib.pmcw.flags &BIT (15 - invalid_flag)),"Clear on STSCH" ); + +report_prefix_pop (); + } +report_prefix_pop (); + + schib.pmcw.flags = old_pmcw_flags; +} + static struct { const char *name; void (*func)(void);
@@ -343,6 +400,7 @@ static struct { { "measurement block (schm)", test_schm }, { "measurement block format0", test_schm_fmt0 }, { "measurement block format1", test_schm_fmt1 }, + { "msch", test_msch }, { NULL, NULL } };
Signature · 1 line
2.31.1
Re: [kvm-unit-tests PATCH v4 1/8] s390x: Add more tests for MSCH
Quoted 12 lines · Nico Boehr
We already have some coverage for MSCH, but there are more cases to test for:
- invalid SCHIB structure. We cover that by setting reserved bits 0, 1, 6 and 7 in the flags of the PMCW.
Older QEMU versions require this bit to always be zero on msch, which is why this test may fail. A fix is available in QEMU master commit2df59b73e086("s390x/css: fix PMCW invalid mask").
- a pointer to an unaligned SCHIB. We cover misalignment by 1 and 2 bytes. Using pointer to valid memory avoids messing up random memory in case of test failures.
Quoted 6 lines
Here's the QEMU PMCW invalid mask fix: https://lists.nongnu.org/archive/html/qemu-s390x/2021-12/msg00100.html
Signed-off-by Nico Boehr <[email protected]>Reviewed-by Janosch Frank <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>Reviewed-by Thomas Huth <[email protected]>
Here too I gave my R-B already a long time ago didn't I ?
Quoted 88 lines
--- s390x/css.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)s390x/css.c +58
-0@@ -27,6 +27,8 @@ static int test_device_sid;static struct senseid *senseid;struct ccw1 *ccw; +char alignment_test_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); +static void test_enumerate (void ) { test_device_sid =css_enumerate ();@@ -331,6 +333,61 @@ static void test_schm_fmt1(void)free_io_mem (mb1,sizeof (struct measurement_block_format1 )); } +static void test_msch (void ) +{ +int invalid_pmcw_flags[] = {0 ,1 ,6 ,7 }; +struct schib test_schib; +uint16_t old_pmcw_flags; +const int align_to =4 ; +int invalid_flag; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + + cc =stsch (test_device_sid, &schib); +if (cc) { +report_fail ("stsch: sch %08x failed with cc=%d" , test_device_sid, cc); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +msch (test_device_sid, (struct schib *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid SCHIB" ); + old_pmcw_flags = schib.pmcw.flags; +for (int i =0 ; i <ARRAY_SIZE (invalid_pmcw_flags); i++) { + invalid_flag = invalid_pmcw_flags[i]; + +report_prefix_pushf ("PMCW flag bit %d set" , invalid_flag); + + schib.pmcw.flags = old_pmcw_flags |BIT (15 - invalid_flag); +expect_pgm_int (); +msch (test_device_sid, &schib); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); + + cc =stsch (test_device_sid, &test_schib); +report (!cc,"STSCH succeeded" ); +report (!(test_schib.pmcw.flags &BIT (15 - invalid_flag)),"Clear on STSCH" ); + +report_prefix_pop (); + } +report_prefix_pop (); + + schib.pmcw.flags = old_pmcw_flags; +} + static struct { const char *name; void (*func)(void);@@ -343,6 +400,7 @@ static struct { { "measurement block (schm)", test_schm }, { "measurement block format0", test_schm_fmt0 }, { "measurement block format1", test_schm_fmt1 }, + { "msch", test_msch }, { NULL, NULL } };
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v4 2/8 s390x: Add test for PFMF low-address protection
In reply to Nico BoehrPFMF should respect the low-address protection when clearing pages, hence add some tests for it.
When low-address protection fails, clearing frame 0 is a destructive operation. It messes up interrupts and thus printing test results won't work properly. Hence, we first attempt to clear frame 1 which is not as destructive.
Doing it this way around increases the chances for the user to see a proper failure message instead of QEMU randomly quitting in the middle of the test run.
--- s390x/pfmf.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
s390x/pfmf.c +29 -0
@@ -113,6 +113,34 @@ static void test_1m_clear(void)report_prefix_pop (); } +static void test_low_addr_prot (void ) +{ +union pfmf_r1 r1 = { + .reg.cf =1 , + .reg.fsc =PFMF_FSC_4K + }; + +report_prefix_push ("low-address protection" ); + +report_prefix_push ("0x1000" ); +expect_pgm_int (); +low_prot_enable (); +pfmf (r1.val, (void *)0x1000 ); +low_prot_disable (); +check_pgm_int_code (PGM_INT_CODE_PROTECTION ); +report_prefix_pop (); + +report_prefix_push ("0x0" ); +expect_pgm_int (); +low_prot_enable (); +pfmf (r1.val,0 ); +low_prot_disable (); +check_pgm_int_code (PGM_INT_CODE_PROTECTION ); +report_prefix_pop (); + +report_prefix_pop (); +} +int main (void ) {bool has_edat =test_facility (8 );
@@ -124,6 +152,7 @@ int main(void) }test_priv (); +test_low_addr_prot ();/* Force the buffer pages in */ memset (pagebuf,0 ,PAGE_SIZE *256 );
Signature · 1 line
2.31.1
PATCH v4 3/8 s390x: Add sck tests
In reply to Nico BoehrSCK updates the guest's TOD clock. It needs to be intercepted, hence we should have some tests for it:
- its operand must be 8-byte aligned. We test for 1, 2 and 4 byte misalignment.
- it should actually update the clock value. As guests are unable to stop their clock, we can only check the clock value is at least higher than the value we set.
- it is a privileged call, so expect it to fail when in problem state. We also test the clock value is not changed in this case. We do so by first adjusting it (privileged) to a high value. We then attempt, in nonprivileged mode, to set the clock to a comparatively small value. We can then store the clock value and test its value is strictly higher than the high value we set previously.
SCK is currently broken in QEMU TCG. A fix was posted upstream ("s390x: sck:
load into a temporary not into in1"):
https://lore.kernel.org/qemu-devel/[email protected]/
--- s390x/Makefile | 1 + s390x/sck.c | 136 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 + 3 files changed, 140 insertions(+) create mode 100644 s390x/sck.c
s390x/Makefile +1 -0
@@ -17,6 +17,7 @@ tests += $(TEST_DIR)/stsi.elf tests += $(TEST_DIR)/skrf.elf tests += $(TEST_DIR)/smp.elf tests += $(TEST_DIR)/sclp.elf +tests += $(TEST_DIR)/sck.elf tests += $(TEST_DIR)/css.elf tests += $(TEST_DIR)/uv-guest.elf tests += $(TEST_DIR)/sie.elf
s390x/sck.c new file +136 -0
136 lines not on this page · raw message
s390x/unittests.cfg +3 -0
@@ -136,3 +136,6 @@ file = firq.elf timeout = 20 extra_params = -smp 1,maxcpus=3 -cpu qemu -device qemu-s390x-cpu,core-id=2 -device qemu-s390x-cpu,core-id=1 accel = tcg + +[sck] +file = sck.elf
Signature · 1 line
2.31.1
PATCH v4 4/8 s390x: Add tests for STCRW
In reply to Nico BoehrThe test consists of two parts: First a simple check to ensure we enforce an aligned address. We test misalignment by 1 and 2 bytes.
The second part tests the handling of pending Channel Reports (CR). We first assume no CR is initally pending and check STCRW returns accordingly. Then, we generate a CR by resetting a Channel Path using RCHP and make sure this results in exactly one CRW being generated which has a Reporting-Source Code (RSC) corresponding to the Channel Path facility.
--- lib/s390x/css.h | 17 ++++++++++ lib/s390x/css_lib.c | 60 +++++++++++++++++++++++++++++++++ s390x/css.c | 82 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 159 insertions(+)
lib/s390x/css.h +17 -0
@@ -266,6 +266,20 @@ static inline int rchp(unsigned long chpid)return cc; } +static inline int stcrw (uint32_t *crw) +{ +int cc; + + asmvolatile ( +" stcrw %[crw]\n" +" ipm %[cc]\n" +" srl %[cc],28" + : [cc]"=d" (cc) + : [crw]"Q" (*crw) + :"cc" ,"memory" ); +return cc; +} +/* Debug functions */ char *dump_pmcw_flags (uint16_t f);char *dump_scsw_flags (uint32_t f);
@@ -294,6 +308,9 @@ int css_residual_count(unsigned int schid);void enable_io_isc (uint8_t isc);int wait_and_check_io_completion (int schid); +int css_find_installed_chpid (int sid,uint8_t *chpid_out); +int css_generate_crw (int sid); +/* * CHSC definitions */
lib/s390x/css_lib.c +60 -0
63 lines not on this page · raw message
s390x/css.c +82 -0
94 lines not on this page · raw message
Signature · 1 line
2.31.1
PATCH v4 5/8 s390x: Add more tests for SSCH
In reply to Nico BoehrWe already have some coverage of SSCH due to its use in start_ccw1_chain() in css_lib, but two more cases deserve our attention:
- unaligned operand address. We check for misalignment by 1 and 2 bytes.
- an invalid ORB structure.
--- s390x/css.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
s390x/css.c +33 -0
@@ -469,6 +469,38 @@ static void test_stcrw(void)report_prefix_pop (); } +static void test_ssch (void ) +{ +const int align_to =4 ; +struct orb orb; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +ssch (test_device_sid, (struct orb *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid ORB" ); + +memset (&orb,0xff ,sizeof (orb)); +expect_pgm_int (); +ssch (test_device_sid, &orb); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); + +report_prefix_pop (); +} + static struct { const char *name; void (*func)(void);
@@ -483,6 +515,7 @@ static struct { { "measurement block format1", test_schm_fmt1 }, { "msch", test_msch }, { "stcrw", test_stcrw }, + { "ssch", test_ssch }, { NULL, NULL } };
Signature · 1 line
2.31.1
PATCH v4 6/8 s390x: Add more tests for STSCH
In reply to Nico Boehrcss_lib extensively uses STSCH, but two more cases deserve their own tests:
- unaligned address for SCHIB. We check for misalignment by 1 and 2 bytes.
- channel not operational
- bit 47 in SID not set
- bit 5 of PMCW flags.
As per the principles of operation, bit 5 of the PMCW flags shall be ignored by msch and always stored as zero by stsch.
Older QEMU versions require this bit to always be zero on msch, which is why this test may fail. A fix is available in QEMU master commit 2df59b73e086 ("s390x/css: fix PMCW invalid mask").
Here's the QEMU PMCW invalid mask fix: https://lists.nongnu.org/archive/html/qemu-s390x/2021-12/msg00100.html
--- s390x/css.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)
s390x/css.c +82 -0
@@ -501,6 +501,86 @@ static void test_ssch(void)report_prefix_pop (); } +static void test_stsch (void ) +{ +const int align_to =4 ; +struct schib schib; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +stsch (test_device_sid, (struct schib *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid subchannel number" ); + cc =stsch (0x0001ffff , &schib); +report (cc ==3 ,"Channel not operational" ); +report_prefix_pop (); + +/* +* No matter if multiple-subchannel-set facility is installed, bit 47 +* always needs to be 1. +*/ +report_prefix_push ("Bit 47 in SID is zero" ); +expect_pgm_int (); +stsch (0x0000ffff , &schib); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); +report_prefix_pop (); +} + +/* +* According to architecture MSCH does ignore bit 5 of the second word +* but STSCH will store bit 5 as zero. +*/ +static void test_pmcw_bit5 (void ) +{ +int cc; +uint16_t old_pmcw_flags; + + cc =stsch (test_device_sid, &schib); +if (cc) { +report_fail ("stsch: sch %08x failed with cc=%d" , test_device_sid, cc); +return ; + } + old_pmcw_flags = schib.pmcw.flags; + +report_prefix_push ("Bit 5 set" ); + + schib.pmcw.flags = old_pmcw_flags |BIT (15 -5 ); + cc =msch (test_device_sid, &schib); +report (!cc,"MSCH cc == 0" ); + + cc =stsch (test_device_sid, &schib); +report (!cc,"STSCH cc == 0" ); +report (!(schib.pmcw.flags &BIT (15 -5 )),"STSCH PMCW Bit 5 is clear" ); + +report_prefix_pop (); + +report_prefix_push ("Bit 5 clear" ); + + schib.pmcw.flags = old_pmcw_flags & ~BIT (15 -5 ); + cc =msch (test_device_sid, &schib); +report (!cc,"MSCH cc == 0" ); + + cc =stsch (test_device_sid, &schib); +report (!cc,"STSCH cc == 0" ); +report (!(schib.pmcw.flags &BIT (15 -5 )),"STSCH PMCW Bit 5 is clear" ); + +report_prefix_pop (); +} + static struct { const char *name; void (*func)(void);
@@ -516,6 +596,8 @@ static struct { { "msch", test_msch }, { "stcrw", test_stcrw }, { "ssch", test_ssch }, + { "stsch", test_stsch }, + { "pmcw bit 5 ignored", test_pmcw_bit5 }, { NULL, NULL } };
Signature · 1 line
2.31.1
Re: [kvm-unit-tests PATCH v4 6/8] s390x: Add more tests for STSCH
Quoted 11 lines · Nico Boehr
css_libextensively uses STSCH, but two more cases deserve their own tests:- unaligned address for SCHIB. We check for misalignment by 1 and 2 bytes.
- channel not operational
- bit 47 in SID not set
- bit 5 of PMCW flags.
As per the principles of operation, bit 5 of the PMCW flags shall be ignored by msch and always stored as zero by stsch.
Quoted 8 lines
Older QEMU versions require this bit to always be zero on msch, which is why this test may fail. A fix is available in QEMU master commit
2df59b73e086("s390x/css: fix PMCW invalid mask").Here's the QEMU PMCW invalid mask fix: https://lists.nongnu.org/archive/html/qemu-s390x/2021-12/msg00100.html
Signed-off-by Nico Boehr <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>
Quoted 104 lines
--- s390x/css.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)s390x/css.c +82
-0@@ -501,6 +501,86 @@ static void test_ssch(void)report_prefix_pop (); } +static void test_stsch (void ) +{ +const int align_to =4 ; +struct schib schib; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +stsch (test_device_sid, (struct schib *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid subchannel number" ); + cc =stsch (0x0001ffff , &schib); +report (cc ==3 ,"Channel not operational" ); +report_prefix_pop (); + +/* +* No matter if multiple-subchannel-set facility is installed, bit 47 +* always needs to be 1. +*/ +report_prefix_push ("Bit 47 in SID is zero" ); +expect_pgm_int (); +stsch (0x0000ffff , &schib); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); +report_prefix_pop (); +} + +/* +* According to architecture MSCH does ignore bit 5 of the second word +* but STSCH will store bit 5 as zero. +*/ +static void test_pmcw_bit5 (void ) +{ +int cc; +uint16_t old_pmcw_flags; + + cc =stsch (test_device_sid, &schib); +if (cc) { +report_fail ("stsch: sch %08x failed with cc=%d" , test_device_sid, cc); +return ; + } + old_pmcw_flags = schib.pmcw.flags; + +report_prefix_push ("Bit 5 set" ); + + schib.pmcw.flags = old_pmcw_flags |BIT (15 -5 ); + cc =msch (test_device_sid, &schib); +report (!cc,"MSCH cc == 0" ); + + cc =stsch (test_device_sid, &schib); +report (!cc,"STSCH cc == 0" ); +report (!(schib.pmcw.flags &BIT (15 -5 )),"STSCH PMCW Bit 5 is clear" ); + +report_prefix_pop (); + +report_prefix_push ("Bit 5 clear" ); + + schib.pmcw.flags = old_pmcw_flags & ~BIT (15 -5 ); + cc =msch (test_device_sid, &schib); +report (!cc,"MSCH cc == 0" ); + + cc =stsch (test_device_sid, &schib); +report (!cc,"STSCH cc == 0" ); +report (!(schib.pmcw.flags &BIT (15 -5 )),"STSCH PMCW Bit 5 is clear" ); + +report_prefix_pop (); +} + static struct { const char *name; void (*func)(void);@@ -516,6 +596,8 @@ static struct { { "msch", test_msch }, { "stcrw", test_stcrw }, { "ssch", test_ssch }, + { "stsch", test_stsch }, + { "pmcw bit 5 ignored", test_pmcw_bit5 }, { NULL, NULL } };
Re: [kvm-unit-tests PATCH v4 6/8] s390x: Add more tests for STSCH
In reply to Nico BoehrQuoted 11 lines · Nico Boehr
css_libextensively uses STSCH, but two more cases deserve their own tests:- unaligned address for SCHIB. We check for misalignment by 1 and 2 bytes.
- channel not operational
- bit 47 in SID not set
- bit 5 of PMCW flags.
As per the principles of operation, bit 5 of the PMCW flags shall be ignored by msch and always stored as zero by stsch.
Quoted 8 lines
Older QEMU versions require this bit to always be zero on msch, which is why this test may fail. A fix is available in QEMU master commit
2df59b73e086("s390x/css: fix PMCW invalid mask").Here's the QEMU PMCW invalid mask fix: https://lists.nongnu.org/archive/html/qemu-s390x/2021-12/msg00100.html
Signed-off-by Nico Boehr <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>
I thought I already gave my R-B for some time.
You can do the checks for the MSS and so on in a future patch.
Quoted 105 lines
--- s390x/css.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)s390x/css.c +82
-0@@ -501,6 +501,86 @@ static void test_ssch(void)report_prefix_pop (); } +static void test_stsch (void ) +{ +const int align_to =4 ; +struct schib schib; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +stsch (test_device_sid, (struct schib *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid subchannel number" ); + cc =stsch (0x0001ffff , &schib); +report (cc ==3 ,"Channel not operational" ); +report_prefix_pop (); + +/* +* No matter if multiple-subchannel-set facility is installed, bit 47 +* always needs to be 1. +*/ +report_prefix_push ("Bit 47 in SID is zero" ); +expect_pgm_int (); +stsch (0x0000ffff , &schib); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); +report_prefix_pop (); +} + +/* +* According to architecture MSCH does ignore bit 5 of the second word +* but STSCH will store bit 5 as zero. +*/ +static void test_pmcw_bit5 (void ) +{ +int cc; +uint16_t old_pmcw_flags; + + cc =stsch (test_device_sid, &schib); +if (cc) { +report_fail ("stsch: sch %08x failed with cc=%d" , test_device_sid, cc); +return ; + } + old_pmcw_flags = schib.pmcw.flags; + +report_prefix_push ("Bit 5 set" ); + + schib.pmcw.flags = old_pmcw_flags |BIT (15 -5 ); + cc =msch (test_device_sid, &schib); +report (!cc,"MSCH cc == 0" ); + + cc =stsch (test_device_sid, &schib); +report (!cc,"STSCH cc == 0" ); +report (!(schib.pmcw.flags &BIT (15 -5 )),"STSCH PMCW Bit 5 is clear" ); + +report_prefix_pop (); + +report_prefix_push ("Bit 5 clear" ); + + schib.pmcw.flags = old_pmcw_flags & ~BIT (15 -5 ); + cc =msch (test_device_sid, &schib); +report (!cc,"MSCH cc == 0" ); + + cc =stsch (test_device_sid, &schib); +report (!cc,"STSCH cc == 0" ); +report (!(schib.pmcw.flags &BIT (15 -5 )),"STSCH PMCW Bit 5 is clear" ); + +report_prefix_pop (); +} + static struct { const char *name; void (*func)(void);@@ -516,6 +596,8 @@ static struct { { "msch", test_msch }, { "stcrw", test_stcrw }, { "ssch", test_ssch }, + { "stsch", test_stsch }, + { "pmcw bit 5 ignored", test_pmcw_bit5 }, { NULL, NULL } };
Signature · 2 lines
Pierre Morel IBM Lab Boeblingen
PATCH v4 7/8 s390x: Add tests for TSCH
In reply to Nico BoehrTSCH has two special cases which need to be tested:
- unaligned address. We test for misalignment by 1 and 2 bytes.
- channel not operational
- bit 47 in SID not set
--- s390x/css.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
s390x/css.c +36 -0
@@ -581,6 +581,41 @@ static void test_pmcw_bit5(void)report_prefix_pop (); } +static void test_tsch (void ) +{ +const int align_to =4 ; +struct irb irb; +int cc; + +if (!test_device_sid) { +report_skip ("No device" ); +return ; + } + +report_prefix_push ("Unaligned" ); +for (int i =1 ; i < align_to; i *=2 ) { +report_prefix_pushf ("%d" , i); + +expect_pgm_int (); +tsch (test_device_sid, (struct irb *)(alignment_test_page + i)); +check_pgm_int_code (PGM_INT_CODE_SPECIFICATION ); + +report_prefix_pop (); + } +report_prefix_pop (); + +report_prefix_push ("Invalid subchannel number" ); + cc =tsch (0x0001ffff , &irb); +report (cc ==3 ,"Channel not operational" ); +report_prefix_pop (); + +report_prefix_push ("Bit 47 in SID is zero" ); +expect_pgm_int (); +tsch (0x0000ffff , &irb); +check_pgm_int_code (PGM_INT_CODE_OPERAND ); +report_prefix_pop (); +} + static struct { const char *name; void (*func)(void);
@@ -598,6 +633,7 @@ static struct { { "ssch", test_ssch }, { "stsch", test_stsch }, { "pmcw bit 5 ignored", test_pmcw_bit5 }, + { "tsch", test_tsch }, { NULL, NULL } };
Signature · 1 line
2.31.1
PATCH v4 8/8 s390x: Add EPSW test
In reply to Nico BoehrEPSW is only intercepted in certain cases. One of these cases is if we have a CRW pending and machine check interrupts are masked. This can be achieved by issuing a RCHP on a valid channel path. This is why we need the CSS lib and an IO device in this test and hence need to skip it when not running under QEMU.
Three special cases deserve our attention:
- upper 32 bits of both operands are never modified,
- second operand is not modified if it is zero.
- when both operands are zero, bits 0-11 and 13-31 of the PSW are stored in r0.
We also verify we get the correct contents when the second operand is zero. To do so, we save the data stored at the first operand in the first case as a reference. As we don't mess with the PSW, the only thing that might change is the Condition Code (CC) due to some instruction in between, so we zero it out using zero_out_cc_from_epsw_op1().
This test must be fenced when running in non-QEMU.
--- s390x/Makefile | 1 + s390x/epsw.c | 113 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 4 ++ 3 files changed, 118 insertions(+) create mode 100644 s390x/epsw.c
s390x/Makefile +1 -0
@@ -27,6 +27,7 @@ tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf tests += $(TEST_DIR)/spec_ex-sie.elf tests += $(TEST_DIR)/firq.elf +tests += $(TEST_DIR)/epsw.elf pv-tests += $(TEST_DIR)/pv-diags.elf
s390x/epsw.c new file +113 -0
113 lines not on this page · raw message
s390x/unittests.cfg +4 -0
@@ -139,3 +139,7 @@ accel = tcg [sck] file = sck.elf + +[epsw] +file = epsw.elf +extra_params = -device virtio-net-ccw
Signature · 1 line
2.31.1