ie: update IE_AKM_IS_SAE to bitwise comparison
James Prestwood
PATCH v3 1/7 ie: update IE_AKM_IS_SAE to bitwise comparison
All uses of this macro will work with a bitwise comparison which is needed for 6GHz checks and somewhat more flexible since it can be used to compare RSN info, not only single AKM values.
--- src/ie.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
src/ie.h +2 -2
@@ -337,8 +337,8 @@ enum ie_rsn_akm_suite { };#define IE_AKM_IS_SAE (akm) \ - ((akm == IE_RSN_AKM_SUITE_SAE_SHA256) || \ - (akm == IE_RSN_AKM_SUITE_FT_OVER_SAE_SHA256)) + (akm & (IE_RSN_AKM_SUITE_SAE_SHA256 | \ + IE_RSN_AKM_SUITE_FT_OVER_SAE_SHA256))#define IE_AKM_IS_FT (akm) \ (akm & (IE_RSN_AKM_SUITE_FT_OVER_8021X | \
Signature · 1 line
2.34.1
James Prestwood
PATCH v3 2/7 ie: update IE_AKM_IS_FILS to be bitwise
Currently nothing actually uses this macro, but switching it to a bitwise comparison makes it more useful and consistent with the others.
--- src/ie.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
src/ie.h +4 -4
@@ -349,10 +349,10 @@ enum ie_rsn_akm_suite { IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA384))#define IE_AKM_IS_FILS (akm) \ - ((akm == IE_RSN_AKM_SUITE_FILS_SHA256) || \ - (akm == IE_RSN_AKM_SUITE_FILS_SHA384) || \ - (akm == IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA256) || \ - (akm == IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA384)) + (akm & (IE_RSN_AKM_SUITE_FILS_SHA256 | \ + IE_RSN_AKM_SUITE_FILS_SHA384 | \ + IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA256 | \ + IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA384))#define IE_LEN (ie) \ ((ie) ? (ie)[1] + 2 : 0)
Signature · 1 line
2.34.1
James Prestwood
PATCH v3 3/7 station: use IE_AKM_IS_FILS
In reply to James PrestwoodUse this macro instead of manually checking
--- src/station.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
src/station.c +1 -4
@@ -1144,10 +1144,7 @@ build_ie:* a reference now so it remains valid (in case of expiration) until * FILS starts. */ -if (hs->akm_suite & (IE_RSN_AKM_SUITE_FILS_SHA256 | -IE_RSN_AKM_SUITE_FILS_SHA384 | -IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA256 | -IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA384 )) +if (IE_AKM_IS_FILS (hs->akm_suite)) hs->erp_cache = erp_cache;else if (erp_cache)erp_cache_put (erp_cache);
Signature · 1 line
2.34.1
James Prestwood
PATCH v3 4/7 ie: add IE_AKM_IS_8021X
In reply to James Prestwood--- src/ie.h | 6 ++++++ 1 file changed, 6 insertions(+)
src/ie.h +6 -0
@@ -354,6 +354,12 @@ enum ie_rsn_akm_suite { IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA256 | \ IE_RSN_AKM_SUITE_FT_OVER_FILS_SHA384)) +#define IE_AKM_IS_8021X (akm) \ + (akm & (IE_RSN_AKM_SUITE_8021X | \ + IE_RSN_AKM_SUITE_FT_OVER_8021X | \ + IE_RSN_AKM_SUITE_8021X_SHA256 | \ + IE_RSN_AKM_SUITE_FT_OVER_8021X_SHA384)) +#define IE_LEN (ie) \ ((ie) ? (ie)[1] + 2 : 0)
Signature · 1 line
2.34.1
James Prestwood
PATCH v3 5/7 network: add 6GHz restrictions to network_can_connect_bss
In reply to James PrestwoodThe 802.11ax standards adds some restrictions for the 6GHz band. In short stations must use SAE, OWE, or 8021x on this band and frame protection is required.
--- src/network.c | 58 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 45 insertions(+), 13 deletions(-)
v3:
* Combined some of the WPA3 checks with 6GHz that duplicated
* Used macros rather than checking all valid AKMs
src/network.c +45 -13
@@ -55,6 +55,7 @@#include "src/util.h" #include "src/erp.h" #include "src/handshake.h" +#include "src/band.h" #define SAE_PT_SETTING "SAE-PT-Group%u"
@@ -774,6 +775,7 @@ int network_can_connect_bss(struct network *network, const struct scan_bss *bss)struct network_config *config = info ? &info->config :NULL ;bool can_transition_disable =wiphy_can_transition_disable (wiphy);struct ie_rsn_info rsn; +enum band_freq band;int ret;switch (security) {
@@ -785,6 +787,9 @@ int network_can_connect_bss(struct network *network, const struct scan_bss *bss)return -ENOSYS ; } +if (!band_freq_to_channel (bss->frequency, &band)) +return -ENOTSUP ; +memset (&rsn,0 ,sizeof (rsn)); ret =scan_bss_get_rsn_info (bss, &rsn);if (ret <0 ) {
@@ -797,6 +802,13 @@ int network_can_connect_bss(struct network *network, const struct scan_bss *bss)* We assume the spec means us to check bit 3 here */ if (ret == -ENOENT && security ==SECURITY_NONE ) { +/* +* 802.11ax 12.12.2 - STA shall not use Open System +* authentication without encryption +*/ +if (band ==BAND_FREQ_6_GHZ ) +return -EPERM ; +if (!config)return 0 ;
@@ -814,26 +826,21 @@ int network_can_connect_bss(struct network *network, const struct scan_bss *bss)return ret; } -if (!config || !config->have_transition_disable) +if (!config || !config->have_transition_disable) { +if (band ==BAND_FREQ_6_GHZ ) + goto check_6ghz; + goto no_transition_disable; + }if (!can_transition_disable) { +if (band ==BAND_FREQ_6_GHZ ) +return -EPERM ; +l_debug ("HW not capable of Transition Disable, skip" ); goto no_transition_disable; } -/* -* WPA3 Specification, v3, Section 8: -* - Disable use of WEP and TKIP -* - Disallow association without negotiation of PMF -*/ - rsn.pairwise_ciphers &= ~IE_RSN_CIPHER_SUITE_TKIP ; - -if (!rsn.group_management_cipher) -return -EPERM ; - - rsn.mfpr = true; -/* WPA3-Personal */ if (test_bit (&config->transition_disable,0 )) { rsn.akm_suites &= ~IE_RSN_AKM_SUITE_PSK ;
@@ -851,6 +858,31 @@ int network_can_connect_bss(struct network *network, const struct scan_bss *bss)return -EPERM ; } +check_6ghz: +/* +* WPA3 Specification, v3, Section 8: +* - Disable use of WEP and TKIP +* - Disallow association without negotiation of PMF +*/ + rsn.pairwise_ciphers &= ~IE_RSN_CIPHER_SUITE_TKIP ; + +if (!rsn.group_management_cipher) +return -EPERM ; + + rsn.mfpr = true; + +/* 802.11ax Section 12.12.2 */ +if (band ==BAND_FREQ_6_GHZ ) { +/* STA shall not use the following cipher suite selectors */ + rsn.pairwise_ciphers &= ~IE_RSN_CIPHER_SUITE_USE_GROUP_CIPHER ; + +/* Basically the STA must use OWE, SAE, or 8021x */ +if (!IE_AKM_IS_SAE (rsn.akm_suites && + !IE_AKM_IS_8021X (rsn.akm_suites) && + (!(rsn.akm_suites |IE_RSN_AKM_SUITE_OWE )))) +return -EPERM ; + } + no_transition_disable:if (!wiphy_select_cipher (wiphy, rsn.pairwise_ciphers))return -ENOTSUP ;
Signature · 1 line
2.34.1
Denis Kenzior
Re: [PATCH v3 5/7] network: add 6GHz restrictions to network_can_connect_bss
Hi James,
Quoted 11 lines · James Prestwood
The 802.11ax standards adds some restrictions for the 6GHz band. In short stations must use SAE, OWE, or 8021x on this band and frame protection is required.
--- src/network.c | 58 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 45 insertions(+), 13 deletions(-)v3:
* Combined some of the WPA3 checks with 6GHz that duplicated
* Used macros rather than checking all valid AKMs
<snip>
src/network.c int network_can_connect_bss(struct network *network, const struct scan_bss *bss) · line 880
Quoted 7 lines
src/network.c +7
-0+/* 802.11ax Section 12.12.2 */ + if (band == BAND_FREQ_6_GHZ) { + /* STA shall not use the following cipher suite selectors */ + rsn.pairwise_ciphers &= ~IE_RSN_CIPHER_SUITE_USE_GROUP_CIPHER; + + /* Basically the STA must use OWE, SAE, or 8021x */ + if (!IE_AKM_IS_SAE(rsn.akm_suites &&
This looks like it is missing a ')'
src/network.c int network_can_connect_bss(struct network *network, const struct scan_bss *bss) · line 882
Quoted 2 lines
src/network.c +2
-0+ !IE_AKM_IS_8021X (rsn.akm_suites) && + (!(rsn.akm_suites | IE_RSN_AKM_SUITE_OWE))))
!(rsn.akm_suites & IE_RSN_AKM_SUITE_OWE) ?
src/network.c int network_can_connect_bss(struct network *network, const struct scan_bss *bss) · line 888
Quoted 7 lines
src/network.c +3
-0+return -EPERM ; + } + no_transition_disable:if (!wiphy_select_cipher (wiphy, rsn.pairwise_ciphers))return -ENOTSUP ;
Regards,
-Denis
James Prestwood
PATCH v3 6/7 station: check supported frequencies in neighbor report
In reply to James PrestwoodIf the report has an unsupported frequency don't add it to the list.
--- src/station.c | 6 ++++++ 1 file changed, 6 insertions(+)
src/station.c +6 -0
@@ -1712,6 +1712,8 @@ static void parse_neighbor_report(struct station *station,struct scan_freq_set *freq_set_md, *freq_set_no_md;uint32_t current_freq =0 ;struct handshake_state *hs =netdev_get_handshake (station->netdev); +const struct scan_freq_set *supported = +wiphy_get_supported_freqs (station->wiphy); freq_set_md =scan_freq_set_new (); freq_set_no_md =scan_freq_set_new ();
@@ -1748,6 +1750,10 @@ static void parse_neighbor_report(struct station *station,if (!(band &wiphy_get_supported_bands (station->wiphy)))continue ; +/* Skip if frequency is not supported */ +if (!scan_freq_set_contains (supported, freq)) +continue ; +if (!memcmp (info.addr, station->connected_bss->addr,ETH_ALEN )) {/*
Signature · 1 line
2.34.1
James Prestwood
PATCH v3 7/7 station: enforce MFPR=1 for 6GHz frequencies
In reply to James PrestwoodThis adds checks if MFP is set to 0 or 1:
0 - Always fail if the frequency is 6GHz
1 - Fail if MFPC=0 and the frequency is 6GHz.
If HW is capable set MFPR=1 for 6GHz
--- src/station.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
src/station.c +24 -1
@@ -1012,9 +1012,13 @@ static int station_build_handshake_rsn(struct handshake_state *hs,struct ie_rsn_info info;uint8_t *ap_ie;bool disable_ocv; +enum band_freq band;memset (&info,0 ,sizeof (info)); +if (!band_freq_to_channel (bss->frequency, &band)) + goto not_supported; +memset (&bss_info,0 ,sizeof (bss_info));scan_bss_get_rsn_info (bss, &bss_info);
@@ -1061,12 +1065,31 @@ static int station_build_handshake_rsn(struct handshake_state *hs,switch (mfp_setting) {case 0 : -break ; +if (band !=BAND_FREQ_6_GHZ ) +break ; + +l_error ("MFP turned off by [General].ManagementFrameProtection," +" 6GHz frequencies are disabled" ); + goto not_supported;case 1 : info.group_management_cipher =wiphy_select_cipher (wiphy, bss_info.group_management_cipher); info.mfpc = info.group_management_cipher !=0 ; + +if (band !=BAND_FREQ_6_GHZ ) +break ; + +if (!info.mfpc) + goto not_supported; + +/* +* 802.11ax Section 12.12.2 +* The STA shall use management frame protection +* (MFPR=1) when using RSN. +*/ + info.mfpr = true; +break ;case 2 : info.group_management_cipher =
Signature · 1 line
2.34.1
Denis Kenzior
Hi James,
Quoted 7 lines · James Prestwood
All uses of this macro will work with a bitwise comparison which is needed for 6GHz checks and somewhat more flexible since it can be used to compare RSN info, not only single AKM values.
--- src/ie.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Patches 1-4 applied. (6-7 were applied earlier).
Regards,
-Denis