arm: dts: mediatek: Format mediatek,larbs as an array of phandles
Subsystems (2)
PATCH v2 1/2 arm: dts: mediatek: Format mediatek,larbs as an array of phandles
Commit 39bd2b6a3783 ("dt-bindings: Improve phandle-array schemas") updated the mediatek,larbs property in the mediatek,iommu.yaml dt-binding to make it clearer that the phandles passed to the property are independent, rather than subsequent arguments to the first phandle.
Update the mediatek,larbs property in the arm Devicetrees to use the same formatting. This change doesn't impact any behavior: the compiled dtb is exactly the same. It does however fix the warnings generated by dtbs_check.
---
v1: https://lore.kernel.org/linux-mediatek/[email protected]/
Changes in v2:
- Split arm and arm64 changes into separate commits
arch/arm/boot/dts/mt2701.dtsi | 2 +- arch/arm/boot/dts/mt7623n.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/mt2701.dtsi +1 -1
@@ -222,7 +222,7 @@ iommu: mmsys_iommu@10205000 { interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; #iommu-cells = <1>; };
arch/arm/boot/dts/mt7623n.dtsi +1 -1
@@ -107,7 +107,7 @@ iommu: mmsys_iommu@10205000 { interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; #iommu-cells = <1>; };
Signature · 1 line
2.35.1
PATCH v2 2/2 arm64: dts: mediatek: Format mediatek,larbs as an array of phandles
Commit 39bd2b6a3783 ("dt-bindings: Improve phandle-array schemas") updated the mediatek,larbs property in the mediatek,iommu.yaml dt-binding to make it clearer that the phandles passed to the property are independent, rather than subsequent arguments to the first phandle.
Update the mediatek,larbs property in the arm64 Devicetrees to use the same formatting. This change doesn't impact any behavior: the compiled dtb is exactly the same. It does however fix the warnings generated by dtbs_check.
---
Changes in v2:
- Split arm and arm64 changes into separate commits
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 6 +++--- arch/arm64/boot/dts/mediatek/mt8167.dtsi | 2 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++-- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/mediatek/mt2712e.dtsi +3 -3
@@ -329,8 +329,8 @@ iommu0: iommu@10205000 { interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb6>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb6>; #iommu-cells = <1>; };
@@ -346,7 +346,7 @@ iommu1: iommu@1020a000 { interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb4 &larb5 &larb7>; + mediatek,larbs = <&larb4>, <&larb5>, <&larb7>; #iommu-cells = <1>; };
arch/arm64/boot/dts/mediatek/mt8167.dtsi +1 -1
@@ -174,7 +174,7 @@ larb2: larb@16010000 { iommu: m4u@10203000 { compatible = "mediatek,mt8167-m4u"; reg = <0 0x10203000 0 0x1000>; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>; #iommu-cells = <1>; };
arch/arm64/boot/dts/mediatek/mt8173.dtsi +2 -2
@@ -588,8 +588,8 @@ iommu: iommu@10205000 { interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb4 &larb5>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; };
arch/arm64/boot/dts/mediatek/mt8183.dtsi +2 -2
@@ -682,8 +682,8 @@ iommu: iommu@10205000 { compatible = "mediatek,mt8183-m4u"; reg = <0 0x10205000 0 0x1000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>; - mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 - &larb4 &larb5 &larb6>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, + <&larb4>, <&larb5>, <&larb6>; #iommu-cells = <1>; };
Signature · 1 line
2.35.1
Quoted 5 lines · Nícolas F. R. A. Prado
Commit
39bd2b6a3783("dt-bindings: Improve phandle-array schemas") updated the mediatek,larbs property in the mediatek,iommu.yaml dt-binding to make it clearer that the phandles passed to the property are independent, rather than subsequent arguments to the first phandle.
Quoted 7 lines
Update the mediatek,larbs property in the arm Devicetrees to use the same formatting. This change doesn't impact any behavior: the compiled dtb is exactly the same. It does however fix the warnings generated by
dtbs_check.Signed-off-by Nícolas F. R. A. Prado <[email protected]>
Applied, thanks!
Matthias
Quoted 36 lines
---
v1: https://lore.kernel.org/linux-mediatek/[email protected]/Changes in v2:
- Split arm and arm64 changes into separate commitsarch/arm/boot/dts/mt2701.dtsi | 2 +- arch/arm/boot/dts/mt7623n.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/mt2701.dtsi +1
-1@@ -222,7 +222,7 @@ iommu: mmsys_iommu@10205000 { interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; #iommu-cells = <1>; };arch/arm/boot/dts/mt7623n.dtsi +1
-1@@ -107,7 +107,7 @@ iommu: mmsys_iommu@10205000 { interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; #iommu-cells = <1>; };