ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
Subsystems (2)
[email protected]
maintainerPATCH 1/1 ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
From: Mihai Sain <[email protected]>
This regulator is powering the vddcore pins from MPU. Its real value on the board and in the MPU datasheet is 1.15V.
--- arch/arm/boot/dts/at91-sam9x60ek.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/at91-sam9x60ek.dts +4 -4
@@ -48,11 +48,11 @@ vdd_1v8: fixed-regulator-vdd_1v8@0 { status = "okay"; }; - vdd_1v5: fixed-regulator-vdd_1v5@1 { + vdd_1v15: fixed-regulator-vdd_1v15@1 { compatible = "regulator-fixed"; - regulator-name = "VDD_1V5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-name = "VDD_1V15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-always-on; status = "okay"; };
Signature · 1 line
2.32.0
Quoted 7 lines · On 02.03.2022 18:02, [email protected] wrote:
From: Mihai Sain <[email protected]>
This regulator is powering the vddcore pins from MPU. Its real value on the board and in the MPU datasheet is 1.15V.
Signed-off-by Mihai Sain <[email protected]>Signed-off-by Nicolas Ferre <[email protected]>
Quoted 24 lines
--- arch/arm/boot/dts/at91-sam9x60ek.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)arch/arm/boot/dts/at91-sam9x60ek.dts +4
-4@@ -48,11 +48,11 @@ vdd_1v8: fixed-regulator-vdd_1v8@0 { status = "okay"; }; - vdd_1v5: fixed-regulator-vdd_1v5@1 { + vdd_1v15: fixed-regulator-vdd_1v15@1 { compatible = "regulator-fixed"; - regulator-name = "VDD_1V5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-name = "VDD_1V15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-always-on; status = "okay"; };
Nicolas Ferre
maintainerQuoted 9 lines · On 02/03/2022 at 17:02, [email protected] wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
From: Mihai Sain <[email protected]>
This regulator is powering the vddcore pins from MPU. Its real value on the board and in the MPU datasheet is 1.15V.
Signed-off-by Mihai Sain <[email protected]>Signed-off-by Nicolas Ferre <[email protected]>
Added to a new DT PR for 5.18.
Best regards,
Nicolas
Quoted 32 lines
--- arch/arm/boot/dts/at91-sam9x60ek.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)arch/arm/boot/dts/at91-sam9x60ek.dts +4
-5@@ -48,11 +48,11 @@ vdd_1v8: fixed-regulator-vdd_1v8@0 { status = "okay"; }; - vdd_1v5: fixed-regulator-vdd_1v5@1 { + vdd_1v15: fixed-regulator-vdd_1v15@1 { compatible = "regulator-fixed"; - regulator-name = "VDD_1V5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-name = "VDD_1V15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-always-on; status = "okay"; }; --2.32.0
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 1 line
Nicolas Ferre