Fix vlan networking on little-endian systems
PATCH v2 1/1 Fix vlan networking on little-endian systems
Vlan configuration seems to have never worked on little-endian systems. This is likely because VLANTAG_IDENTIFIER is not byte-swapped before copying into the net buffer, nor is vlantag. We can resolve this by using grub_cpu_to_be16 and its inverse when copying vlan info to/from the net buffer.
Signed-off-by Chad Kimes <[email protected]>
--- grub-core/net/ethernet.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
grub-core/net/ethernet.c +5 -4
@@ -58,7 +58,7 @@ send_ethernet_packet (struct grub_net_network_level_interface *inf,struct etherhdr *eth;grub_err_t err;grub_uint8_t etherhdr_size; -grub_uint16_t vlantag_id =VLANTAG_IDENTIFIER ; +grub_uint16_t vlantag_id =grub_cpu_to_be16_compile_time (VLANTAG_IDENTIFIER ); etherhdr_size =sizeof (*eth);COMPILE_TIME_ASSERT (sizeof (*eth) +4 <GRUB_NET_MAX_LINK_HEADER_SIZE );
@@ -93,8 +93,9 @@ send_ethernet_packet (struct grub_net_network_level_interface *inf, (char *) nb->data + etherhdr_size - 6, 2);/* Add the tag in the middle */ +grub_uint16_t vlan =grub_cpu_to_be16 (inf->vlantag);grub_memcpy ((char *) nb->data + etherhdr_size -6 , &vlantag_id,2 ); -grub_memcpy ((char *) nb->data + etherhdr_size -4 , (char *) &(inf->vlantag),2 ); +grub_memcpy ((char *) nb->data + etherhdr_size -4 , &vlan,2 ); }return inf->card->driver->send (inf->card, nb);
@@ -118,9 +119,9 @@ grub_net_recv_ethernet_packet (struct grub_net_buff *nb,/* Check if a vlan-tag is present. If so, the ethernet header is 4 bytes */ /* longer than the original one. The vlantag id is extracted and the header */ /* is reseted to the original size. */ -if (grub_get_unaligned16 (nb->data + etherhdr_size -2 ) ==VLANTAG_IDENTIFIER ) +if (grub_get_unaligned16 (nb->data + etherhdr_size -2 ) ==grub_cpu_to_be16_compile_time (VLANTAG_IDENTIFIER )) { - vlantag =grub_get_unaligned16 (nb->data + etherhdr_size); + vlantag =grub_be_to_cpu16 (grub_get_unaligned16 (nb->data + etherhdr_size)); etherhdr_size +=4 ;/* Move eth type to the original position */ grub_memcpy((char *) nb->data + etherhdr_size - 6,
Signature · 1 line
2.25.1
Quoted 6 lines · Chad Kimes via Grub-devel
Vlan configuration seems to have never worked on little-endian systems. This is likely because
VLANTAG_IDENTIFIERis not byte-swapped before copying into the net buffer, nor is vlantag. We can resolve this by usinggrub_cpu_to_be16and its inverse when copying vlan info to/from the net buffer.Signed-off-by Chad Kimes <[email protected]>
Thank you for fixing this.
Reviewed-by Daniel Kiper <[email protected]>
Daniel