migrate_pages02: check file exist before opening it
PATCH 1/1 migrate_pages02: check file exist before opening it
This test reports a warning on some special kernel (with NUMA BALANCE disabling). The main reason is that prefix '?' makes tst_sys_conf_save only silent ignores non-exist paths. But seems we still open it in other places (e.g. in setup function).
tst_sys_conf.c:58: TINFO: Path not found: '/proc/sys/kernel/numa_balancing' tst_test.c:1365: TINFO: Timeout per run is 0h 05m 00s migrate_pages02.c:279: TWARN: Failed to open FILE '/proc/sys/kernel/numa_balancing' migrate_pages02.c:317: TINFO: Using nodes: 0 1
---
Notes:
Looks like we have many tests use the prefix '?' for knob save/restore, but none of them check if the paths are valid when opening at other places, by now, I just get informed that migrate_pages02 threw a warning.
I'm thinking maybe we can keep the return value of tst_sys_conf_save as a check condition before opening the file, but this is not fit for test with many paths saving:
e.g.
add_key05.c- "?/proc/sys/kernel/keys/gc_delay",
add_key05.c- "?/proc/sys/kernel/keys/maxkeys",
testcases/kernel/syscalls/migrate_pages/migrate_pages02.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
testcases/kernel/syscalls/migrate_pages/migrate_pages02.c +5 -2
@@ -37,6 +37,8 @@*/ #define NODE_MIN_FREEMEM (32*1024*1024) +#define NUMA_BALANCING "/proc/sys/kernel/numa_balancing" +#ifdef HAVE_NUMA_V2 static const char nobody_uid[] ="nobody" ;
@@ -276,7 +278,8 @@ static void setup(void)else if (tst_kvercmp (2 ,6 ,18 ) <0 )tst_brk (TCONF ,"2.6.18 or greater kernel required" ); -FILE_PRINTF ("/proc/sys/kernel/numa_balancing" ,"0" ); +if (access (NUMA_BALANCING ,F_OK ) ==0 ) +FILE_PRINTF (NUMA_BALANCING ,"0" );/* * find 2 nodes, which can hold NODE_MIN_FREEMEM bytes * The reason is that:
@@ -328,7 +331,7 @@ static struct tst_test test = { .test_all = run, .setup = setup, .save_restore = (const char *const []) { -"?/proc/sys/kernel/numa_balancing" , +"?NUMA_BALANCING" ,NULL , }, };
Signature · 5 lines
2.31.1 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Hi!
Quoted 18 lines
This test reports a warning on some special kernel (with NUMA BALANCE disabling). The main reason is that prefix '?' makes
tst_sys_conf_saveonly silent ignores non-exist paths. But seems we still open it in other places (e.g. in setup function).tst_sys_conf.c:58: TINFO: Path not found: '
/proc/sys/kernel/numa_balancing' tst_test.c:1365: TINFO: Timeout per run is 0h 05m 00s migrate_pages02.c:279: TWARN: Failed to open FILE '/proc/sys/kernel/numa_balancing' migrate_pages02.c:317: TINFO: Using nodes: 0 1Signed-off-by Li Wang <[email protected]>---
Notes:
Looks like we have many tests use the prefix '?' for knob save/restore, but none of them check if the paths are valid when opening at other places, by now, I just get informed thatmigrate_pages02threw a warning.
Quoted 6 lines
I'm thinking maybe we can keep the return value of
tst_sys_conf_saveas a check condition before opening the file, but this is not fit for test with many paths saving:
e.g.
add_key05.c- "?/proc/sys/kernel/keys/gc_delay",
add_key05.c- "?/proc/sys/kernel/keys/maxkeys",
Looking at the test we set these values to make the test run faster and the test works fine even without these knobs, right?
Maybe we just need to enhance the .save_restore with another parameter; a value to set the knob to if it does exists, so in add_key05.c it would look like:
struct tst_path_val {
const char *path;
const char *val;
}; .save_restore = (const struct tst_path_val const[]) {
{"?/proc/sys/kernel/keys/gc_delay", "1"},
{"?/proc/sys/kernel/keys/maxkeys", "200"},
{"?/proc/sys/kernel/keys/maxbytes", "20000"}
NULL,
},And in cases we do not need to set value we would just pass NULL as val...
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Quoted 1 line
+ "?NUMA_BALANCING",
You probably meant "?"NUMA_BALANCING
Quoted 10 lines
Maybe we just need to enhance the .save_restore with another parameter; a value to set the knob to if it does exists, so in
add_key05.cit would look like:struct tst_path_val { const char *path; const char *val; };
Quoted 8 lines
.save_restore = (const struct tst_path_val const[]) { {"?/proc/sys/kernel/keys/gc_delay", "1"}, {"?/proc/sys/kernel/keys/maxkeys", "200"}, {"?/proc/sys/kernel/keys/maxbytes", "20000"} NULL, },And in cases we do not need to set value we would just pass NULL as val...
That should work for most testcases, I don't recall one where we need to cycle through more values.
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Quoted 3 lines · Jan Stancek
Quoted 1 line
+ "?NUMA_BALANCING",
You probably meant "?"NUMA_BALANCING
I guess both should be fine.
(tried locally with original patch and works well)
Quoted 18 lines
Quoted 18 lines
Maybe we just need to enhance the .save_restore with another parameter; a value to set the knob to if it does exists, so in
add_key05.cit would look like:struct tst_path_val { const char *path; const char *val; };.save_restore = (const struct tst_path_val const[]) { {"?/proc/sys/kernel/keys/gc_delay", "1"}, {"?/proc/sys/kernel/keys/maxkeys", "200"}, {"?/proc/sys/kernel/keys/maxbytes", "20000"} NULL, },
Quoted 3 lines
Quoted 1 line
And in cases we do not need to set value we would just pass NULL as
val...
+1
Quoted 4 lines
That should work for most testcases, I don't recall one where we need to cycle through more values.
Agree, even we have that requirement in the future, pass NULL at the beginning
and reset it via FILE_PRINTF for more cycle values that should be working. Thanks for the suggestions, I will get start work on V2.
Signature · 2 lines
Regards, Li Wang
Signature · 2 lines
-- Mailing list info: https://lists.linux.it/listinfo/ltp