drm: exynos: dsi: Convert drm bridge
Subsystems (5)
v6 cover drm: exynos: dsi: Convert drm bridge
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764 panel_bridge API
Patch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4: panel_bridge API
Patch 5: bridge conversion
Patch 6: atomic functions
[1] https://patchwork.amarulasolutions.com/cover/1839
Any inputs?
Jagan.
Jagan Teki (6):
drm: bridge: tc358764: Use drm panel_bridge API
drm: bridge: panel: Reset the connector state pointer
exynos: drm: dsi: Attach in_bridge in MIC driver
drm: exynos: dsi: Use drm panel_bridge API
drm: exynos: dsi: Convert to bridge driver
drm: exynos: dsi: Switch to atomic funcs
drivers/gpu/drm/bridge/panel.c | 3 + drivers/gpu/drm/bridge/tc358764.c | 104 +--------- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 241 ++++++------------------ drivers/gpu/drm/exynos/exynos_drm_mic.c | 22 +++ 4 files changed, 93 insertions(+), 277 deletions(-)
Signature · 1 line
2.25.1
PATCH v6 1/6 drm: bridge: tc358764: Use drm panel_bridge API
Replace the manual panel handling code by a drm panel_bridge via devm_drm_of_get_bridge().
Adding panel_bridge handling,
- Drops drm_connector and related operations as drm_bridge_attach creates connector during attachment.
- Drops panel pointer and panel healpers.
This simplifies the driver and allows all components in the display pipeline to be treated as bridges.
---
Changes for v6:
- none
Changes for v2:
- s/panel_bridge/next_bridge
- drop unneeded headers
drivers/gpu/drm/bridge/tc358764.c | 104 ++---------------------------- 1 file changed, 6 insertions(+), 98 deletions(-)
drivers/gpu/drm/bridge/tc358764.c +6 -98
@@ -16,14 +16,9 @@#include <video/mipi_display.h> #include <drm/drm_atomic_helper.h> -#include <drm/drm_bridge.h> -#include <drm/drm_crtc.h> -#include <drm/drm_fb_helper.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_of.h> -#include <drm/drm_panel.h> #include <drm/drm_print.h> -#include <drm/drm_probe_helper.h> #define FLD_MASK (start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))#define FLD_VAL (val, start, end) (((val) << (end)) & FLD_MASK(start, end))
@@ -153,10 +148,9 @@ static const char * const tc358764_supplies[] = {struct tc358764 {struct device *dev;struct drm_bridge bridge; -struct drm_connector connector; +struct drm_bridge *next_bridge;struct regulator_bulk_data supplies[ARRAY_SIZE (tc358764_supplies)];struct gpio_desc *gpio_reset; -struct drm_panel *panel;int error; };
@@ -210,12 +204,6 @@ static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge) return container_of(bridge, struct tc358764, bridge); } -static inline -struct tc358764 *connector_to_tc358764 (struct drm_connector *connector) -{ - return container_of(connector, struct tc358764, connector); -} -static int tc358764_init (struct tc358764 *ctx) {u32 v =0 ;
@@ -278,43 +266,11 @@ static void tc358764_reset(struct tc358764 *ctx)usleep_range (1000 ,2000 ); } -static int tc358764_get_modes (struct drm_connector *connector) -{ -struct tc358764 *ctx =connector_to_tc358764 (connector); - -return drm_panel_get_modes (ctx->panel, connector); -} - -static const -struct drm_connector_helper_funcs tc358764_connector_helper_funcs = { - .get_modes = tc358764_get_modes, -}; - -static const struct drm_connector_funcs tc358764_connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static void tc358764_disable (struct drm_bridge *bridge) -{ -struct tc358764 *ctx =bridge_to_tc358764 (bridge); -int ret =drm_panel_disable (bridge_to_tc358764 (bridge)->panel); - -if (ret <0 ) -dev_err (ctx->dev,"error disabling panel (%d)\n" , ret); -} -static void tc358764_post_disable (struct drm_bridge *bridge) {struct tc358764 *ctx =bridge_to_tc358764 (bridge);int ret; - ret =drm_panel_unprepare (ctx->panel); -if (ret <0 ) -dev_err (ctx->dev,"error unpreparing panel (%d)\n" , ret);tc358764_reset (ctx);usleep_range (10000 ,15000 ); ret =regulator_bulk_disable (ARRAY_SIZE (ctx->supplies), ctx->supplies);
@@ -335,72 +291,25 @@ static void tc358764_pre_enable(struct drm_bridge *bridge) ret =tc358764_init (ctx);if (ret <0 )dev_err (ctx->dev,"error initializing bridge (%d)\n" , ret); - ret =drm_panel_prepare (ctx->panel); -if (ret <0 ) -dev_err (ctx->dev,"error preparing panel (%d)\n" , ret); -} - -static void tc358764_enable (struct drm_bridge *bridge) -{ -struct tc358764 *ctx =bridge_to_tc358764 (bridge); -int ret =drm_panel_enable (ctx->panel); - -if (ret <0 ) -dev_err (ctx->dev,"error enabling panel (%d)\n" , ret); }static int tc358764_attach (struct drm_bridge *bridge,enum drm_bridge_attach_flags flags) -{ -struct tc358764 *ctx =bridge_to_tc358764 (bridge); -struct drm_device *drm = bridge->dev; -int ret; - -if (flags &DRM_BRIDGE_ATTACH_NO_CONNECTOR ) { -DRM_ERROR ("Fix bridge driver to make connector optional!" ); -return -EINVAL ; - } - - ctx->connector.polled =DRM_CONNECTOR_POLL_HPD ; - ret =drm_connector_init (drm, &ctx->connector, - &tc358764_connector_funcs, -DRM_MODE_CONNECTOR_LVDS ); -if (ret) { -DRM_ERROR ("Failed to initialize connector\n" ); -return ret; - } - -drm_connector_helper_add (&ctx->connector, - &tc358764_connector_helper_funcs); -drm_connector_attach_encoder (&ctx->connector, bridge->encoder); - ctx->connector.funcs->reset (&ctx->connector); -drm_connector_register (&ctx->connector); - -return 0 ; -} - -static void tc358764_detach (struct drm_bridge *bridge) {struct tc358764 *ctx =bridge_to_tc358764 (bridge); -drm_connector_unregister (&ctx->connector); - ctx->panel =NULL ; -drm_connector_put (&ctx->connector); +return drm_bridge_attach (bridge->encoder, ctx->next_bridge, bridge, flags); }static const struct drm_bridge_funcs tc358764_bridge_funcs = { - .disable = tc358764_disable, .post_disable = tc358764_post_disable, - .enable = tc358764_enable, .pre_enable = tc358764_pre_enable, .attach = tc358764_attach, - .detach = tc358764_detach, };static int tc358764_parse_dt (struct tc358764 *ctx) {struct device *dev = ctx->dev; -int ret; ctx->gpio_reset =devm_gpiod_get (dev,"reset" ,GPIOD_OUT_LOW );if (IS_ERR (ctx->gpio_reset)) {
@@ -408,12 +317,11 @@ static int tc358764_parse_dt(struct tc358764 *ctx)return PTR_ERR (ctx->gpio_reset); } - ret =drm_of_find_panel_or_bridge (ctx->dev->of_node,1 ,0 , &ctx->panel, -NULL ); -if (ret && ret != -EPROBE_DEFER ) -dev_err (dev,"cannot find panel (%d)\n" , ret); + ctx->next_bridge =devm_drm_of_get_bridge (dev, dev->of_node,1 ,0 ); +if (IS_ERR (ctx->next_bridge)) +return PTR_ERR (ctx->next_bridge); -return ret; +return 0 ; }static int tc358764_configure_regulators (struct tc358764 *ctx)
Signature · 1 line
2.25.1
Re: [PATCH v6 1/6] drm: bridge: tc358764: Use drm panel_bridge API
Quoted 8 lines · Jagan Teki
Replace the manual panel handling code by a drm
panel_bridgeviadevm_drm_of_get_bridge().Adding
panel_bridgehandling,- Drops
drm_connectorand related operations asdrm_bridge_attachcreates connector during attachment.
Quoted 6 lines
- Drops panel pointer and panel healpers.
This simplifies the driver and allows all components in the display pipeline to be treated as bridges.
Signed-off-by Jagan Teki <[email protected]>
Quoted 179 lines
---
Changes for v6:
- none
Changes for v2:
- s/panel_bridge/next_bridge
- drop unneeded headersdrivers/gpu/drm/bridge/tc358764.c | 104 ++---------------------------- 1 file changed, 6 insertions(+), 98 deletions(-)drivers/gpu/drm/bridge/tc358764.c +2
-96@@ -16,14 +16,9 @@#include <video/mipi_display.h> #include <drm/drm_atomic_helper.h> -#include <drm/drm_bridge.h> -#include <drm/drm_crtc.h> -#include <drm/drm_fb_helper.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_of.h> -#include <drm/drm_panel.h> #include <drm/drm_print.h> -#include <drm/drm_probe_helper.h> #define FLD_MASK (start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))#define FLD_VAL (val, start, end) (((val) << (end)) & FLD_MASK(start, end))@@ -153,10 +148,9 @@ static const char * const tc358764_supplies[] = {struct tc358764 {struct device *dev;struct drm_bridge bridge; -struct drm_connector connector; +struct drm_bridge *next_bridge;struct regulator_bulk_data supplies[ARRAY_SIZE (tc358764_supplies)];struct gpio_desc *gpio_reset; -struct drm_panel *panel;int error; };@@ -210,12 +204,6 @@ static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge) return container_of(bridge, struct tc358764, bridge); } -static inline -struct tc358764 *connector_to_tc358764 (struct drm_connector *connector) -{ - return container_of(connector, struct tc358764, connector); -} -static int tc358764_init (struct tc358764 *ctx) {u32 v =0 ;@@ -278,43 +266,11 @@ static void tc358764_reset(struct tc358764 *ctx)usleep_range (1000 ,2000 ); } -static int tc358764_get_modes (struct drm_connector *connector) -{ -struct tc358764 *ctx =connector_to_tc358764 (connector); - -return drm_panel_get_modes (ctx->panel, connector); -} - -static const -struct drm_connector_helper_funcs tc358764_connector_helper_funcs = { - .get_modes = tc358764_get_modes, -}; - -static const struct drm_connector_funcs tc358764_connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static void tc358764_disable (struct drm_bridge *bridge) -{ -struct tc358764 *ctx =bridge_to_tc358764 (bridge); -int ret =drm_panel_disable (bridge_to_tc358764 (bridge)->panel); - -if (ret <0 ) -dev_err (ctx->dev,"error disabling panel (%d)\n" , ret); -} -static void tc358764_post_disable (struct drm_bridge *bridge) {struct tc358764 *ctx =bridge_to_tc358764 (bridge);int ret; - ret =drm_panel_unprepare (ctx->panel); -if (ret <0 ) -dev_err (ctx->dev,"error unpreparing panel (%d)\n" , ret);tc358764_reset (ctx);usleep_range (10000 ,15000 ); ret =regulator_bulk_disable (ARRAY_SIZE (ctx->supplies), ctx->supplies);@@ -335,72 +291,25 @@ static void tc358764_pre_enable(struct drm_bridge *bridge) ret =tc358764_init (ctx);if (ret <0 )dev_err (ctx->dev,"error initializing bridge (%d)\n" , ret); - ret =drm_panel_prepare (ctx->panel); -if (ret <0 ) -dev_err (ctx->dev,"error preparing panel (%d)\n" , ret); -} - -static void tc358764_enable (struct drm_bridge *bridge) -{ -struct tc358764 *ctx =bridge_to_tc358764 (bridge); -int ret =drm_panel_enable (ctx->panel); - -if (ret <0 ) -dev_err (ctx->dev,"error enabling panel (%d)\n" , ret); }static int tc358764_attach (struct drm_bridge *bridge,enum drm_bridge_attach_flags flags) -{ -struct tc358764 *ctx =bridge_to_tc358764 (bridge); -struct drm_device *drm = bridge->dev; -int ret; - -if (flags &DRM_BRIDGE_ATTACH_NO_CONNECTOR ) { -DRM_ERROR ("Fix bridge driver to make connector optional!" ); -return -EINVAL ; - } - - ctx->connector.polled =DRM_CONNECTOR_POLL_HPD ; - ret =drm_connector_init (drm, &ctx->connector, - &tc358764_connector_funcs, -DRM_MODE_CONNECTOR_LVDS ); -if (ret) { -DRM_ERROR ("Failed to initialize connector\n" ); -return ret; - } - -drm_connector_helper_add (&ctx->connector, - &tc358764_connector_helper_funcs); -drm_connector_attach_encoder (&ctx->connector, bridge->encoder); - ctx->connector.funcs->reset (&ctx->connector); -drm_connector_register (&ctx->connector); - -return 0 ; -} - -static void tc358764_detach (struct drm_bridge *bridge) {struct tc358764 *ctx =bridge_to_tc358764 (bridge); -drm_connector_unregister (&ctx->connector); - ctx->panel =NULL ; -drm_connector_put (&ctx->connector); +return drm_bridge_attach (bridge->encoder, ctx->next_bridge, bridge, flags); }static const struct drm_bridge_funcs tc358764_bridge_funcs = { - .disable = tc358764_disable, .post_disable = tc358764_post_disable, - .enable = tc358764_enable, .pre_enable = tc358764_pre_enable, .attach = tc358764_attach, - .detach = tc358764_detach, };static int tc358764_parse_dt (struct tc358764 *ctx) {struct device *dev = ctx->dev; -int ret; ctx->gpio_reset =devm_gpiod_get (dev,"reset" ,GPIOD_OUT_LOW );if (IS_ERR (ctx->gpio_reset)) {@@ -408,12 +317,11 @@ static int tc358764_parse_dt(struct tc358764 *ctx)return PTR_ERR (ctx->gpio_reset); } - ret =drm_of_find_panel_or_bridge (ctx->dev->of_node,1 ,0 , &ctx->panel, -NULL ); -if (ret && ret != -EPROBE_DEFER )
drivers/gpu/drm/bridge/tc358764.c static int tc358764_parse_dt(struct tc358764 *ctx) · line 327
Quoted 10 lines
drivers/gpu/drm/bridge/tc358764.c +4
-2-dev_err (dev,"cannot find panel (%d)\n" , ret); + ctx->next_bridge =devm_drm_of_get_bridge (dev, dev->of_node,1 ,0 ); +if (IS_ERR (ctx->next_bridge)) +return PTR_ERR (ctx->next_bridge); -return ret; +return 0 ; }static int tc358764_configure_regulators (struct tc358764 *ctx)
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
PATCH v6 2/6 drm: bridge: panel: Reset the connector state pointer
In reply to Jagan TekiTrigger hotplug event with drm_kms_helper_hotplug_event might fail if the connector state pointer is NULL.
BUG observed in exynos dsi driver where drm_bridge_attach is trying to register a connector in panel_bridge before the hotplug event is triggered,
WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_atomic_state_helper.c:494 drm_atomic_helper_connector_duplicate_state+0x94/0x9c Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.16.0-rc1-00009-g704b1dbfa4c2 #11058 Hardware name: Samsung Exynos (Flattened Device Tree) [<c0110b30>] (unwind_backtrace) from [<c010c618>] (show_stack+0x10/0x14) [<c010c618>] (show_stack) from [<c0b657d4>] (dump_stack_lvl+0x58/0x70) [<c0b657d4>] (dump_stack_lvl) from [<c01261dc>] (__warn+0xd0/0x134) [<c01261dc>] (__warn) from [<c0b5f628>] (warn_slowpath_fmt+0x5c/0xb4) [<c0b5f628>] (warn_slowpath_fmt) from [<c064bce4>] (drm_atomic_helper_connector_duplicate_state+0x94/0x9c) [<c064bce4>] (drm_atomic_helper_connector_duplicate_state) from [<c0666b64>] (drm_atomic_get_connector_state+0xd4/0x190) [<c0666b64>] (drm_atomic_get_connector_state) from [<c0667928>] (__drm_atomic_helper_set_config+0x314/0x368) [<c0667928>] (__drm_atomic_helper_set_config) from [<c067e628>] (drm_client_modeset_commit_atomic+0x170/0x278) [<c067e628>] (drm_client_modeset_commit_atomic) from [<c067e800>] (drm_client_modeset_commit_locked+0x60/0x1c8) [<c067e800>] (drm_client_modeset_commit_locked) from [<c067e98c>] (drm_client_modeset_commit+0x24/0x40) [<c067e98c>] (drm_client_modeset_commit) from [<c06509c0>] (drm_fb_helper_set_par+0xb8/0xf8) [<c06509c0>] (drm_fb_helper_set_par) from [<c05b86d0>] (fbcon_init+0x2c0/0x518) [<c05b86d0>] (fbcon_init) from [<c060636c>] (visual_init+0xc0/0x108) [<c060636c>] (visual_init) from [<c06085e4>] (do_bind_con_driver+0x1b8/0x3a4) [<c06085e4>] (do_bind_con_driver) from [<c0608b40>] (do_take_over_console+0x13c/0x1e8) [<c0608b40>] (do_take_over_console) from [<c05b6854>] (do_fbcon_takeover+0x78/0xd8) [<c05b6854>] (do_fbcon_takeover) from [<c05b1154>] (register_framebuffer+0x208/0x2e0) [<c05b1154>] (register_framebuffer) from [<c064ead0>] (__drm_fb_helper_initial_config_and_unlock+0x400/0x63c) [<c064ead0>] (__drm_fb_helper_initial_config_and_unlock) from [<c063a718>] (drm_kms_helper_hotplug_event+0x24/0x30) [<c063a718>] (drm_kms_helper_hotplug_event) from [<c068f668>] (exynos_dsi_host_attach+0x174/0x1fc) [<c068f668>] (exynos_dsi_host_attach) from [<c0699354>] (s6e8aa0_probe+0x1b4/0x218)
So reset the atomic state for a given connector by freeing the state pointer and allocate a new empty state object. This can be done using connector funcs->reset helper and has to be done before the hotplug even calls.
This patch calls the connector->funcs->reset in panel_bridge_attach.
---
Changes for v6, v5:
- none
Changes for v4:
- new patch
drivers/gpu/drm/bridge/panel.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/bridge/panel.c +3 -0
@@ -83,6 +83,9 @@ static int panel_bridge_attach(struct drm_bridge *bridge,drm_connector_attach_encoder (&panel_bridge->connector, bridge->encoder); +if (connector->funcs->reset) + connector->funcs->reset (connector); +return 0 ; }
Signature · 1 line
2.25.1
Re: [PATCH v6 2/6] drm: bridge: panel: Reset the connector state pointer
Quoted 32 lines · Jagan Teki
Trigger hotplug event with
drm_kms_helper_hotplug_eventmight fail if the connector state pointer is NULL.BUG observed in exynos dsi driver where
drm_bridge_attachis trying to register a connector inpanel_bridgebefore the hotplug event is triggered,WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_atomic_state_helper.c:494 drm_atomic_helper_connector_duplicate_state+0x94/0x9c Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.16.0-rc1-00009-g704b1dbfa4c2 #11058 Hardware name: Samsung Exynos (Flattened Device Tree) [<c0110b30>] (unwind_backtrace) from [<c010c618>] (show_stack+0x10/0x14) [<c010c618>] (show_stack) from [<c0b657d4>] (dump_stack_lvl+0x58/0x70) [<c0b657d4>] (dump_stack_lvl) from [<c01261dc>] (__warn+0xd0/0x134) [<c01261dc>] (__warn) from [<c0b5f628>] (warn_slowpath_fmt+0x5c/0xb4) [<c0b5f628>] (warn_slowpath_fmt) from [<c064bce4>] (drm_atomic_helper_connector_duplicate_state+0x94/0x9c) [<c064bce4>] (drm_atomic_helper_connector_duplicate_state) from [<c0666b64>] (drm_atomic_get_connector_state+0xd4/0x190) [<c0666b64>] (drm_atomic_get_connector_state) from [<c0667928>] (__drm_atomic_helper_set_config+0x314/0x368) [<c0667928>] (__drm_atomic_helper_set_config) from [<c067e628>] (drm_client_modeset_commit_atomic+0x170/0x278) [<c067e628>] (drm_client_modeset_commit_atomic) from [<c067e800>] (drm_client_modeset_commit_locked+0x60/0x1c8) [<c067e800>] (drm_client_modeset_commit_locked) from [<c067e98c>] (drm_client_modeset_commit+0x24/0x40) [<c067e98c>] (drm_client_modeset_commit) from [<c06509c0>] (drm_fb_helper_set_par+0xb8/0xf8) [<c06509c0>] (drm_fb_helper_set_par) from [<c05b86d0>] (fbcon_init+0x2c0/0x518) [<c05b86d0>] (fbcon_init) from [<c060636c>] (visual_init+0xc0/0x108) [<c060636c>] (visual_init) from [<c06085e4>] (do_bind_con_driver+0x1b8/0x3a4) [<c06085e4>] (do_bind_con_driver) from [<c0608b40>] (do_take_over_console+0x13c/0x1e8) [<c0608b40>] (do_take_over_console) from [<c05b6854>] (do_fbcon_takeover+0x78/0xd8) [<c05b6854>] (do_fbcon_takeover) from [<c05b1154>] (register_framebuffer+0x208/0x2e0) [<c05b1154>] (register_framebuffer) from [<c064ead0>] (__drm_fb_helper_initial_config_and_unlock+0x400/0x63c) [<c064ead0>] (__drm_fb_helper_initial_config_and_unlock) from [<c063a718>] (drm_kms_helper_hotplug_event+0x24/0x30) [<c063a718>] (drm_kms_helper_hotplug_event) from [<c068f668>] (exynos_dsi_host_attach+0x174/0x1fc) [<c068f668>] (exynos_dsi_host_attach) from [<c0699354>] (s6e8aa0_probe+0x1b4/0x218)
Quoted 7 lines
So reset the atomic state for a given connector by freeing the state pointer and allocate a new empty state object. This can be done using connector
funcs->resethelper and has to be done before the hotplug even calls.This patch calls the
connector->funcs->resetinpanel_bridge_attach.Signed-off-by Jagan Teki <[email protected]>
Quoted 14 lines
---
Changes for v6, v5:
- none
Changes for v4:
- new patchdrivers/gpu/drm/bridge/panel.c | 3 +++ 1 file changed, 3 insertions(+)drivers/gpu/drm/bridge/panel.c +0
-0
drivers/gpu/drm/bridge/panel.c static int panel_bridge_attach(struct drm_bridge *bridge, · line 91
Quoted 9 lines
drivers/gpu/drm/bridge/panel.c +3
-0@@ -83,6 +83,9 @@ static int panel_bridge_attach(struct drm_bridge *bridge,drm_connector_attach_encoder (&panel_bridge->connector, bridge->encoder); +if (connector->funcs->reset) + connector->funcs->reset (connector); +return 0 ; }
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
PATCH v6 3/6 exynos: drm: dsi: Attach in_bridge in MIC driver
In reply to Jagan TekiMIC drivers in the Exynos5433 display pipeline are already registered as bridge drivers and it is more advisable to attach the downstream bridge on the bridge attach call instead of doing the same in the DSI driver.
This makes bridge attachment more meaningful and avoids the races during bridge function calls.
So, move the bridge finding and drm_bridge_attach from DSI to MIC.
---
Changes for v6:
- new patch
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 15 --------------- drivers/gpu/drm/exynos/exynos_drm_mic.c | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 15 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_dsi.c +0 -15
@@ -1660,11 +1660,6 @@ static int exynos_dsi_of_read_u32(const struct device_node *np,return ret; } -enum { -DSI_PORT_IN , -DSI_PORT_OUT -}; -static int exynos_dsi_parse_dt (struct exynos_dsi *dsi) {struct device *dev = dsi->dev;
@@ -1695,8 +1690,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,struct exynos_dsi *dsi =dev_get_drvdata (dev);struct drm_encoder *encoder = &dsi->encoder;struct drm_device *drm_dev = data; -struct device_node *in_bridge_node; -struct drm_bridge *in_bridge;int ret;drm_simple_encoder_init (drm_dev, encoder,DRM_MODE_ENCODER_TMDS );
@@ -1707,14 +1700,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,if (ret <0 )return ret; - in_bridge_node =of_graph_get_remote_node (dev->of_node,DSI_PORT_IN ,0 ); -if (in_bridge_node) { - in_bridge =of_drm_find_bridge (in_bridge_node); -if (in_bridge) -drm_bridge_attach (encoder, in_bridge,NULL ,0 ); -of_node_put (in_bridge_node); - } -return mipi_dsi_host_register (&dsi->dsi_host); }
drivers/gpu/drm/exynos/exynos_drm_mic.c +22 -0
@@ -102,6 +102,7 @@ struct exynos_mic {struct videomode vm;struct drm_encoder *encoder;struct drm_bridge bridge; +struct drm_bridge *next_bridge;bool enabled; };
@@ -298,12 +299,22 @@ static void mic_pre_enable(struct drm_bridge *bridge)static void mic_enable (struct drm_bridge *bridge) { } +static int mic_attach (struct drm_bridge *bridge, +enum drm_bridge_attach_flags flags) +{ +struct exynos_mic *mic = bridge->driver_private; + +return drm_bridge_attach (bridge->encoder, mic->next_bridge, + &mic->bridge, flags); +} +static const struct drm_bridge_funcs mic_bridge_funcs = { .disable = mic_disable, .post_disable = mic_post_disable, .mode_set = mic_mode_set, .pre_enable = mic_pre_enable, .enable = mic_enable, + .attach = mic_attach, }; static int exynos_mic_bind(struct device *dev, struct device *master,
@@ -377,6 +388,7 @@ static int exynos_mic_probe(struct platform_device *pdev) {struct device *dev = &pdev->dev;struct exynos_mic *mic; +struct device_node *remote;struct resource res;int ret, i;
@@ -420,6 +432,16 @@ static int exynos_mic_probe(struct platform_device *pdev) } } + remote =of_graph_get_remote_node (dev->of_node,1 ,0 ); + mic->next_bridge =of_drm_find_bridge (remote); +if (IS_ERR (mic->next_bridge)) { +DRM_DEV_ERROR (dev,"mic: Failed to find next bridge\n" ); + ret =PTR_ERR (mic->next_bridge); + goto err; + } + +of_node_put (remote); +platform_set_drvdata (pdev, mic); mic->bridge.funcs = &mic_bridge_funcs;
Signature · 1 line
2.25.1
Re: [PATCH v6 3/6] exynos: drm: dsi: Attach in_bridge in MIC driver
Quoted 11 lines · Jagan Teki
MIC drivers in the Exynos5433 display pipeline are already registered as bridge drivers and it is more advisable to attach the downstream bridge on the bridge attach call instead of doing the same in the DSI driver.
This makes bridge attachment more meaningful and avoids the races during bridge function calls.
So, move the bridge finding and
drm_bridge_attachfrom DSI to MIC.Signed-off-by Jagan Teki <[email protected]>
Quoted 98 lines
---
Changes for v6:
- new patchdrivers/gpu/drm/exynos/exynos_drm_dsi.c | 15 --------------- drivers/gpu/drm/exynos/exynos_drm_mic.c | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 15 deletions(-)drivers/gpu/drm/exynos/exynos_drm_dsi.c +0
-15@@ -1660,11 +1660,6 @@ static int exynos_dsi_of_read_u32(const struct device_node *np,return ret; } -enum { -DSI_PORT_IN , -DSI_PORT_OUT -}; -static int exynos_dsi_parse_dt (struct exynos_dsi *dsi) {struct device *dev = dsi->dev;@@ -1695,8 +1690,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,struct exynos_dsi *dsi =dev_get_drvdata (dev);struct drm_encoder *encoder = &dsi->encoder;struct drm_device *drm_dev = data; -struct device_node *in_bridge_node; -struct drm_bridge *in_bridge;int ret;drm_simple_encoder_init (drm_dev, encoder,DRM_MODE_ENCODER_TMDS );@@ -1707,14 +1700,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,if (ret <0 )return ret; - in_bridge_node =of_graph_get_remote_node (dev->of_node,DSI_PORT_IN ,0 ); -if (in_bridge_node) { - in_bridge =of_drm_find_bridge (in_bridge_node); -if (in_bridge) -drm_bridge_attach (encoder, in_bridge,NULL ,0 ); -of_node_put (in_bridge_node); - } -return mipi_dsi_host_register (&dsi->dsi_host); }drivers/gpu/drm/exynos/exynos_drm_mic.c +15
-0@@ -102,6 +102,7 @@ struct exynos_mic {struct videomode vm;struct drm_encoder *encoder;struct drm_bridge bridge; +struct drm_bridge *next_bridge;bool enabled; };@@ -298,12 +299,22 @@ static void mic_pre_enable(struct drm_bridge *bridge)static void mic_enable (struct drm_bridge *bridge) { } +static int mic_attach (struct drm_bridge *bridge, +enum drm_bridge_attach_flags flags) +{ +struct exynos_mic *mic = bridge->driver_private; + +return drm_bridge_attach (bridge->encoder, mic->next_bridge, + &mic->bridge, flags); +} +static const struct drm_bridge_funcs mic_bridge_funcs = { .disable = mic_disable, .post_disable = mic_post_disable, .mode_set = mic_mode_set, .pre_enable = mic_pre_enable, .enable = mic_enable, + .attach = mic_attach, }; static int exynos_mic_bind(struct device *dev, struct device *master,@@ -377,6 +388,7 @@ static int exynos_mic_probe(struct platform_device *pdev) {struct device *dev = &pdev->dev;struct exynos_mic *mic; +struct device_node *remote;struct resource res;int ret, i;@@ -420,6 +432,16 @@ static int exynos_mic_probe(struct platform_device *pdev) } } + remote =of_graph_get_remote_node (dev->of_node,1 ,0 ); + mic->next_bridge =of_drm_find_bridge (remote); +if (IS_ERR (mic->next_bridge)) {
drivers/gpu/drm/exynos/exynos_drm_mic.c static int exynos_mic_probe(struct platform_device *pdev) · line 447
Quoted 10 lines
drivers/gpu/drm/exynos/exynos_drm_mic.c +7
-0+DRM_DEV_ERROR (dev,"mic: Failed to find next bridge\n" ); + ret =PTR_ERR (mic->next_bridge); + goto err; + } + +of_node_put (remote); +platform_set_drvdata (pdev, mic); mic->bridge.funcs = &mic_bridge_funcs;
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
PATCH v6 4/6 drm: exynos: dsi: Use drm panel_bridge API
In reply to Jagan TekiReplace the manual panel handling code by a drm panel_bridge via devm_drm_of_get_bridge().
Adding panel_bridge handling,
- Drops drm_connector and related operations as drm_bridge_attach creates connector during attachment.
- Drops panel pointer and iterate the bridge, so-that it can operate the normal bridge and panel_bridge in constitutive callbacks.
This simplifies the driver and allows all components in the display pipeline to be treated as bridges.
---
Changes for v6, v5:
- none
Changes for v4:
- drop unneeded headers
Changes for v3:
- fix port number
- add print for attached device
Changes for v2:
- new patch
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 157 ++++-------------------- 1 file changed, 23 insertions(+), 134 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_dsi.c +23 -134
@@ -24,9 +24,7 @@#include <drm/drm_atomic_helper.h> #include <drm/drm_bridge.h> -#include <drm/drm_fb_helper.h> #include <drm/drm_mipi_dsi.h> -#include <drm/drm_panel.h> #include <drm/drm_print.h> #include <drm/drm_probe_helper.h> #include <drm/drm_simple_kms_helper.h>
@@ -253,8 +251,6 @@ struct exynos_dsi_driver_data {struct exynos_dsi {struct drm_encoder encoder;struct mipi_dsi_host dsi_host; -struct drm_connector connector; -struct drm_panel *panel;struct list_head bridge_chain;struct drm_bridge *out_bridge;struct device *dev;
@@ -285,7 +281,6 @@ struct exynos_dsi { };#define host_to_dsi (host) container_of(host, struct exynos_dsi, dsi_host) -#define connector_to_dsi (c) container_of(c, struct exynos_dsi, connector)static inline struct exynos_dsi *encoder_to_dsi (struct drm_encoder *e) {
@@ -1380,42 +1375,21 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) dsi->state |=DSIM_STATE_ENABLED ; -if (dsi->panel) { - ret =drm_panel_prepare (dsi->panel); -if (ret <0 ) - goto err_put_sync; - }else { -list_for_each_entry_reverse (iter, &dsi->bridge_chain, - chain_node) { -if (iter->funcs->pre_enable) - iter->funcs->pre_enable (iter); - } +list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) { +if (iter->funcs->pre_enable) + iter->funcs->pre_enable (iter); }exynos_dsi_set_display_mode (dsi);exynos_dsi_set_display_enable (dsi, true); -if (dsi->panel) { - ret =drm_panel_enable (dsi->panel); -if (ret <0 ) - goto err_display_disable; - }else { -list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->enable) - iter->funcs->enable (iter); - } +list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { +if (iter->funcs->enable) + iter->funcs->enable (iter); } dsi->state |=DSIM_STATE_VIDOUT_AVAILABLE ;return ; - -err_display_disable: -exynos_dsi_set_display_enable (dsi, false); -drm_panel_unprepare (dsi->panel); - -err_put_sync: - dsi->state &= ~DSIM_STATE_ENABLED ; -pm_runtime_put (dsi->dev); }static void exynos_dsi_disable (struct drm_encoder *encoder)
@@ -1428,15 +1402,12 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE ; -drm_panel_disable (dsi->panel); -list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) {if (iter->funcs->disable) iter->funcs->disable (iter); }exynos_dsi_set_display_enable (dsi, false); -drm_panel_unprepare (dsi->panel);list_for_each_entry (iter, &dsi->bridge_chain, chain_node) {if (iter->funcs->post_disable)
@@ -1456,70 +1427,6 @@ static void exynos_dsi_mode_set(struct drm_encoder *encoder,drm_mode_copy (&dsi->mode, adjusted_mode); } -static enum drm_connector_status -exynos_dsi_detect (struct drm_connector *connector,bool force) -{ -return connector->status; -} - -static void exynos_dsi_connector_destroy (struct drm_connector *connector) -{ -drm_connector_unregister (connector); -drm_connector_cleanup (connector); - connector->dev =NULL ; -} - -static const struct drm_connector_funcs exynos_dsi_connector_funcs = { - .detect = exynos_dsi_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = exynos_dsi_connector_destroy, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int exynos_dsi_get_modes (struct drm_connector *connector) -{ -struct exynos_dsi *dsi =connector_to_dsi (connector); - -if (dsi->panel) -return drm_panel_get_modes (dsi->panel, connector); - -return 0 ; -} - -static const struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = { - .get_modes = exynos_dsi_get_modes, -}; - -static int exynos_dsi_create_connector (struct drm_encoder *encoder) -{ -struct exynos_dsi *dsi =encoder_to_dsi (encoder); -struct drm_connector *connector = &dsi->connector; -struct drm_device *drm = encoder->dev; -int ret; - - connector->polled =DRM_CONNECTOR_POLL_HPD ; - - ret =drm_connector_init (drm, connector, &exynos_dsi_connector_funcs, -DRM_MODE_CONNECTOR_DSI ); -if (ret) { -DRM_DEV_ERROR (dsi->dev, -"Failed to initialize connector with drm\n" ); -return ret; - } - - connector->status = connector_status_disconnected; -drm_connector_helper_add (connector, &exynos_dsi_connector_helper_funcs); -drm_connector_attach_encoder (connector, encoder); -if (!drm->registered) -return 0 ; - - connector->funcs->reset (connector); -drm_connector_register (connector); -return 0 ; -} -static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { .enable = exynos_dsi_enable, .disable = exynos_dsi_disable,
@@ -1532,33 +1439,23 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *device) {struct exynos_dsi *dsi =host_to_dsi (host); +struct device *dev = dsi->dev;struct drm_encoder *encoder = &dsi->encoder;struct drm_device *drm = encoder->dev; -struct drm_bridge *out_bridge; - - out_bridge =of_drm_find_bridge (device->dev.of_node); -if (out_bridge) { -drm_bridge_attach (encoder, out_bridge,NULL ,0 ); - dsi->out_bridge = out_bridge; -list_splice_init (&encoder->bridge_chain, &dsi->bridge_chain); - }else { -int ret =exynos_dsi_create_connector (encoder); - -if (ret) { -DRM_DEV_ERROR (dsi->dev, -"failed to create connector ret = %d\n" , - ret); -drm_encoder_cleanup (encoder); -return ret; - } +int ret; - dsi->panel =of_drm_find_panel (device->dev.of_node); -if (IS_ERR (dsi->panel)) - dsi->panel =NULL ; -else - dsi->connector.status = connector_status_connected; + dsi->out_bridge =devm_drm_of_get_bridge (dev, dev->of_node,1 ,0 ); +if (IS_ERR (dsi->out_bridge)) { + ret =PTR_ERR (dsi->out_bridge); +DRM_DEV_ERROR (dev,"failed to find the bridge: %d\n" , ret); +return ret; } +DRM_DEV_INFO (dev,"Attached %s device\n" , device->name); + +drm_bridge_attach (encoder, dsi->out_bridge,NULL ,0 ); +list_splice_init (&encoder->bridge_chain, &dsi->bridge_chain); +/* * This is a temporary solution and should be made by more generic way. *
@@ -1566,7 +1463,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,* TE interrupt handler. */ if (!(device->mode_flags &MIPI_DSI_MODE_VIDEO )) { -int ret =exynos_dsi_register_te_irq (dsi, &device->dev); + ret =exynos_dsi_register_te_irq (dsi, &device->dev);if (ret)return ret; }
@@ -1593,18 +1490,10 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,struct exynos_dsi *dsi =host_to_dsi (host);struct drm_device *drm = dsi->encoder.dev; -if (dsi->panel) { -mutex_lock (&drm->mode_config.mutex); -exynos_dsi_disable (&dsi->encoder); - dsi->panel =NULL ; - dsi->connector.status = connector_status_disconnected; -mutex_unlock (&drm->mode_config.mutex); - }else { -if (dsi->out_bridge->funcs->detach) - dsi->out_bridge->funcs->detach (dsi->out_bridge); - dsi->out_bridge =NULL ; -INIT_LIST_HEAD (&dsi->bridge_chain); - } +if (dsi->out_bridge->funcs->detach) + dsi->out_bridge->funcs->detach (dsi->out_bridge); + dsi->out_bridge =NULL ; +INIT_LIST_HEAD (&dsi->bridge_chain);if (drm->mode_config.poll_enabled)drm_kms_helper_hotplug_event (drm);
Signature · 1 line
2.25.1
Re: [PATCH v6 4/6] drm: exynos: dsi: Use drm panel_bridge API
Quoted 8 lines · Jagan Teki
Replace the manual panel handling code by a drm
panel_bridgeviadevm_drm_of_get_bridge().Adding
panel_bridgehandling,- Drops
drm_connectorand related operations asdrm_bridge_attachcreates connector during attachment.
Quoted 7 lines
- Drops panel pointer and iterate the bridge, so-that it can operate the normal bridge and
panel_bridgein constitutive callbacks.This simplifies the driver and allows all components in the display pipeline to be treated as bridges.
Signed-off-by Jagan Teki <[email protected]>
Quoted 249 lines
---
Changes for v6, v5:
- none
Changes for v4:
- drop unneeded headers
Changes for v3:
- fix port number
- add print for attached device
Changes for v2:
- new patchdrivers/gpu/drm/exynos/exynos_drm_dsi.c | 157 ++++-------------------- 1 file changed, 23 insertions(+), 134 deletions(-)drivers/gpu/drm/exynos/exynos_drm_dsi.c +19
-131@@ -24,9 +24,7 @@#include <drm/drm_atomic_helper.h> #include <drm/drm_bridge.h> -#include <drm/drm_fb_helper.h> #include <drm/drm_mipi_dsi.h> -#include <drm/drm_panel.h> #include <drm/drm_print.h> #include <drm/drm_probe_helper.h> #include <drm/drm_simple_kms_helper.h> @@ -253,8 +251,6 @@ struct exynos_dsi_driver_data {struct exynos_dsi {struct drm_encoder encoder;struct mipi_dsi_host dsi_host; -struct drm_connector connector; -struct drm_panel *panel;struct list_head bridge_chain;struct drm_bridge *out_bridge;struct device *dev;@@ -285,7 +281,6 @@ struct exynos_dsi { };#define host_to_dsi (host) container_of(host, struct exynos_dsi, dsi_host) -#define connector_to_dsi (c) container_of(c, struct exynos_dsi, connector)static inline struct exynos_dsi *encoder_to_dsi (struct drm_encoder *e) {@@ -1380,42 +1375,21 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) dsi->state |=DSIM_STATE_ENABLED ; -if (dsi->panel) { - ret =drm_panel_prepare (dsi->panel); -if (ret <0 ) - goto err_put_sync; - }else { -list_for_each_entry_reverse (iter, &dsi->bridge_chain, - chain_node) { -if (iter->funcs->pre_enable) - iter->funcs->pre_enable (iter); - } +list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) { +if (iter->funcs->pre_enable) + iter->funcs->pre_enable (iter); }exynos_dsi_set_display_mode (dsi);exynos_dsi_set_display_enable (dsi, true); -if (dsi->panel) { - ret =drm_panel_enable (dsi->panel); -if (ret <0 ) - goto err_display_disable; - }else { -list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->enable) - iter->funcs->enable (iter); - } +list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { +if (iter->funcs->enable) + iter->funcs->enable (iter); } dsi->state |=DSIM_STATE_VIDOUT_AVAILABLE ;return ; - -err_display_disable: -exynos_dsi_set_display_enable (dsi, false); -drm_panel_unprepare (dsi->panel); - -err_put_sync: - dsi->state &= ~DSIM_STATE_ENABLED ; -pm_runtime_put (dsi->dev); }static void exynos_dsi_disable (struct drm_encoder *encoder)@@ -1428,15 +1402,12 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE ; -drm_panel_disable (dsi->panel); -list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) {if (iter->funcs->disable) iter->funcs->disable (iter); }exynos_dsi_set_display_enable (dsi, false); -drm_panel_unprepare (dsi->panel);list_for_each_entry (iter, &dsi->bridge_chain, chain_node) {if (iter->funcs->post_disable)@@ -1456,70 +1427,6 @@ static void exynos_dsi_mode_set(struct drm_encoder *encoder,drm_mode_copy (&dsi->mode, adjusted_mode); } -static enum drm_connector_status -exynos_dsi_detect (struct drm_connector *connector,bool force) -{ -return connector->status; -} - -static void exynos_dsi_connector_destroy (struct drm_connector *connector) -{ -drm_connector_unregister (connector); -drm_connector_cleanup (connector); - connector->dev =NULL ; -} - -static const struct drm_connector_funcs exynos_dsi_connector_funcs = { - .detect = exynos_dsi_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = exynos_dsi_connector_destroy, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int exynos_dsi_get_modes (struct drm_connector *connector) -{ -struct exynos_dsi *dsi =connector_to_dsi (connector); - -if (dsi->panel) -return drm_panel_get_modes (dsi->panel, connector); - -return 0 ; -} - -static const struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = { - .get_modes = exynos_dsi_get_modes, -}; - -static int exynos_dsi_create_connector (struct drm_encoder *encoder) -{ -struct exynos_dsi *dsi =encoder_to_dsi (encoder); -struct drm_connector *connector = &dsi->connector; -struct drm_device *drm = encoder->dev; -int ret; - - connector->polled =DRM_CONNECTOR_POLL_HPD ; - - ret =drm_connector_init (drm, connector, &exynos_dsi_connector_funcs, -DRM_MODE_CONNECTOR_DSI ); -if (ret) { -DRM_DEV_ERROR (dsi->dev, -"Failed to initialize connector with drm\n" ); -return ret; - } - - connector->status = connector_status_disconnected; -drm_connector_helper_add (connector, &exynos_dsi_connector_helper_funcs); -drm_connector_attach_encoder (connector, encoder); -if (!drm->registered) -return 0 ; - - connector->funcs->reset (connector); -drm_connector_register (connector); -return 0 ; -} -static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { .enable = exynos_dsi_enable, .disable = exynos_dsi_disable,@@ -1532,33 +1439,23 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *device) {struct exynos_dsi *dsi =host_to_dsi (host); +struct device *dev = dsi->dev;struct drm_encoder *encoder = &dsi->encoder;struct drm_device *drm = encoder->dev; -struct drm_bridge *out_bridge; - - out_bridge =of_drm_find_bridge (device->dev.of_node); -if (out_bridge) { -drm_bridge_attach (encoder, out_bridge,NULL ,0 ); - dsi->out_bridge = out_bridge; -list_splice_init (&encoder->bridge_chain, &dsi->bridge_chain); - }else { -int ret =exynos_dsi_create_connector (encoder); - -if (ret) { -DRM_DEV_ERROR (dsi->dev, -"failed to create connector ret = %d\n" , - ret); -drm_encoder_cleanup (encoder); -return ret; - } +int ret; - dsi->panel =of_drm_find_panel (device->dev.of_node); -if (IS_ERR (dsi->panel)) - dsi->panel =NULL ; -else - dsi->connector.status = connector_status_connected; + dsi->out_bridge =devm_drm_of_get_bridge (dev, dev->of_node,1 ,0 ); +if (IS_ERR (dsi->out_bridge)) { + ret =PTR_ERR (dsi->out_bridge); +DRM_DEV_ERROR (dev,"failed to find the bridge: %d\n" , ret); +return ret; } +DRM_DEV_INFO (dev,"Attached %s device\n" , device->name); + +drm_bridge_attach (encoder, dsi->out_bridge,NULL ,0 ); +list_splice_init (&encoder->bridge_chain, &dsi->bridge_chain); +/* * This is a temporary solution and should be made by more generic way. * @@ -1566,7 +1463,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,* TE interrupt handler. */ if (!(device->mode_flags &MIPI_DSI_MODE_VIDEO )) { -int ret =exynos_dsi_register_te_irq (dsi, &device->dev); + ret =exynos_dsi_register_te_irq (dsi, &device->dev);if (ret)return ret; }@@ -1593,18 +1490,10 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,struct exynos_dsi *dsi =host_to_dsi (host);struct drm_device *drm = dsi->encoder.dev; -if (dsi->panel) { -mutex_lock (&drm->mode_config.mutex); -exynos_dsi_disable (&dsi->encoder); - dsi->panel =NULL ; - dsi->connector.status = connector_status_disconnected; -mutex_unlock (&drm->mode_config.mutex); - }else { -if (dsi->out_bridge->funcs->detach) - dsi->out_bridge->funcs->detach (dsi->out_bridge);
drivers/gpu/drm/exynos/exynos_drm_dsi.c static int exynos_dsi_host_detach(struct mipi_dsi_host *host, · line 1499
Quoted 10 lines
drivers/gpu/drm/exynos/exynos_drm_dsi.c +4
-3- dsi->out_bridge =NULL ; -INIT_LIST_HEAD (&dsi->bridge_chain); - } +if (dsi->out_bridge->funcs->detach) + dsi->out_bridge->funcs->detach (dsi->out_bridge); + dsi->out_bridge =NULL ; +INIT_LIST_HEAD (&dsi->bridge_chain);if (drm->mode_config.poll_enabled)drm_kms_helper_hotplug_event (drm);
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
PATCH v6 5/6 drm: exynos: dsi: Convert to bridge driver
In reply to Jagan TekiConvert the encoders to bridge drivers in order to standardize on a single API with built-in dumb encoder support for compatibility with existing component drivers.
Driver bridge conversion will help to reuse the same bridge on different platforms as exynos dsi driver can be used as a Samsung DSIM and use it for i.MX8MM platform.
Bridge conversion,
- Drops drm_encoder_helper_funcs.
- Adds drm_bridge_funcs and register a drm bridge.
- Drops bridge_chain.
- Separate pre_enable from enable function.
- Separate post_disable from disable function.
Convert it.
---
Changes for v6, v5:
- none
Changes for v4:
- add pre_enable function
- add post_disable function
Changes for v3:
- move bridge add in host_attach
- move bridge remove in host_detach
- use flags, bridge in drm_bridge_attach in attch
Changes for v2:
- drop bridge_chain
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 88 +++++++++++++------------ 1 file changed, 45 insertions(+), 43 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_dsi.c +45 -43
@@ -251,7 +251,7 @@ struct exynos_dsi_driver_data {struct exynos_dsi {struct drm_encoder encoder;struct mipi_dsi_host dsi_host; -struct list_head bridge_chain; +struct drm_bridge bridge;struct drm_bridge *out_bridge;struct device *dev;struct drm_display_mode mode;
@@ -282,9 +282,9 @@ struct exynos_dsi {#define host_to_dsi (host) container_of(host, struct exynos_dsi, dsi_host) -static inline struct exynos_dsi *encoder_to_dsi (struct drm_encoder *e) +static inline struct exynos_dsi *bridge_to_dsi (struct drm_bridge *b) { - return container_of(e, struct exynos_dsi, encoder); + return container_of(b, struct exynos_dsi, bridge); }enum reg_idx {
@@ -1358,10 +1358,9 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi) } } -static void exynos_dsi_enable (struct drm_encoder *encoder) +static void exynos_dsi_pre_enable (struct drm_bridge *bridge) { -struct exynos_dsi *dsi =encoder_to_dsi (encoder); -struct drm_bridge *iter; +struct exynos_dsi *dsi =bridge_to_dsi (bridge);int ret;if (dsi->state &DSIM_STATE_ENABLED )
@@ -1374,63 +1373,64 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) } dsi->state |=DSIM_STATE_ENABLED ; +} -list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->pre_enable) - iter->funcs->pre_enable (iter); - } +static void exynos_dsi_enable (struct drm_bridge *bridge) +{ +struct exynos_dsi *dsi =bridge_to_dsi (bridge);exynos_dsi_set_display_mode (dsi);exynos_dsi_set_display_enable (dsi, true); -list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->enable) - iter->funcs->enable (iter); - } - dsi->state |=DSIM_STATE_VIDOUT_AVAILABLE ; +return ; } -static void exynos_dsi_disable (struct drm_encoder *encoder) +static void exynos_dsi_disable (struct drm_bridge *bridge) { -struct exynos_dsi *dsi =encoder_to_dsi (encoder); -struct drm_bridge *iter; +struct exynos_dsi *dsi =bridge_to_dsi (bridge);if (!(dsi->state &DSIM_STATE_ENABLED ))return ; dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE ; +} -list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->disable) - iter->funcs->disable (iter); - } +static void exynos_dsi_post_disable (struct drm_bridge *bridge) +{ +struct exynos_dsi *dsi =bridge_to_dsi (bridge);exynos_dsi_set_display_enable (dsi, false); -list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->post_disable) - iter->funcs->post_disable (iter); - } - dsi->state &= ~DSIM_STATE_ENABLED ;pm_runtime_put_sync (dsi->dev); } -static void exynos_dsi_mode_set (struct drm_encoder *encoder, -struct drm_display_mode *mode, -struct drm_display_mode *adjusted_mode) +static void exynos_dsi_mode_set (struct drm_bridge *bridge, +const struct drm_display_mode *mode, +const struct drm_display_mode *adjusted_mode) { -struct exynos_dsi *dsi =encoder_to_dsi (encoder); +struct exynos_dsi *dsi =bridge_to_dsi (bridge);drm_mode_copy (&dsi->mode, adjusted_mode); } -static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { - .enable = exynos_dsi_enable, - .disable = exynos_dsi_disable, - .mode_set = exynos_dsi_mode_set, +static int exynos_dsi_attach (struct drm_bridge *bridge, +enum drm_bridge_attach_flags flags) +{ +struct exynos_dsi *dsi =bridge_to_dsi (bridge); + +return drm_bridge_attach (bridge->encoder, dsi->out_bridge,NULL , flags); +} + +static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = { + .pre_enable = exynos_dsi_pre_enable, + .enable = exynos_dsi_enable, + .disable = exynos_dsi_disable, + .post_disable = exynos_dsi_post_disable, + .mode_set = exynos_dsi_mode_set, + .attach = exynos_dsi_attach, };MODULE_DEVICE_TABLE (of, exynos_dsi_of_match);
@@ -1453,8 +1453,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,DRM_DEV_INFO (dev,"Attached %s device\n" , device->name); -drm_bridge_attach (encoder, dsi->out_bridge,NULL ,0 ); -list_splice_init (&encoder->bridge_chain, &dsi->bridge_chain); +drm_bridge_add (&dsi->bridge); + +drm_bridge_attach (encoder, &dsi->bridge,NULL ,0 );/* * This is a temporary solution and should be made by more generic way.
@@ -1493,13 +1494,14 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,if (dsi->out_bridge->funcs->detach) dsi->out_bridge->funcs->detach (dsi->out_bridge); dsi->out_bridge =NULL ; -INIT_LIST_HEAD (&dsi->bridge_chain);if (drm->mode_config.poll_enabled)drm_kms_helper_hotplug_event (drm);exynos_dsi_unregister_te_irq (dsi); +drm_bridge_remove (&dsi->bridge); +return 0 ; }
@@ -1583,8 +1585,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,drm_simple_encoder_init (drm_dev, encoder,DRM_MODE_ENCODER_TMDS ); -drm_encoder_helper_add (encoder, &exynos_dsi_encoder_helper_funcs); - ret =exynos_drm_set_possible_crtcs (encoder,EXYNOS_DISPLAY_TYPE_LCD );if (ret <0 )return ret;
@@ -1596,9 +1596,8 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master, void *data) {struct exynos_dsi *dsi =dev_get_drvdata (dev); -struct drm_encoder *encoder = &dsi->encoder; -exynos_dsi_disable (encoder); +exynos_dsi_disable (&dsi->bridge);mipi_dsi_host_unregister (&dsi->dsi_host); }
@@ -1621,7 +1620,6 @@ static int exynos_dsi_probe(struct platform_device *pdev)init_completion (&dsi->completed);spin_lock_init (&dsi->transfer_lock);INIT_LIST_HEAD (&dsi->transfer_list); -INIT_LIST_HEAD (&dsi->bridge_chain); dsi->dsi_host.ops = &exynos_dsi_ops; dsi->dsi_host.dev = dev;
@@ -1689,6 +1687,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)pm_runtime_enable (dev); + dsi->bridge.funcs = &exynos_dsi_bridge_funcs; + dsi->bridge.of_node = dev->of_node; + dsi->bridge.type =DRM_MODE_CONNECTOR_DSI ; + ret =component_add (dev, &exynos_dsi_component_ops);if (ret) goto err_disable_runtime;
Signature · 1 line
2.25.1
Re: [PATCH v6 5/6] drm: exynos: dsi: Convert to bridge driver
Quoted 16 lines · Jagan Teki
Convert the encoders to bridge drivers in order to standardize on a single API with built-in dumb encoder support for compatibility with existing component drivers.
Driver bridge conversion will help to reuse the same bridge on different platforms as exynos dsi driver can be used as a Samsung DSIM and use it for i.MX8MM platform.
Bridge conversion,
- Drops
drm_encoder_helper_funcs.- Adds
drm_bridge_funcsand register a drm bridge.- Drops
bridge_chain.
Quoted 7 lines
- Separate
pre_enablefrom enable function.- Separate
post_disablefrom disable function.Convert it.
Signed-off-by Jagan Teki <[email protected]>
Quoted 205 lines
---
Changes for v6, v5:
- none
Changes for v4:
- addpre_enablefunction
- addpost_disablefunction
Changes for v3:
- move bridge add inhost_attach
- move bridge remove inhost_detach
- use flags, bridge indrm_bridge_attachin attch
Changes for v2:
- dropbridge_chaindrivers/gpu/drm/exynos/exynos_drm_dsi.c | 88 +++++++++++++------------ 1 file changed, 45 insertions(+), 43 deletions(-)drivers/gpu/drm/exynos/exynos_drm_dsi.c +41
-43@@ -251,7 +251,7 @@ struct exynos_dsi_driver_data {struct exynos_dsi {struct drm_encoder encoder;struct mipi_dsi_host dsi_host; -struct list_head bridge_chain; +struct drm_bridge bridge;struct drm_bridge *out_bridge;struct device *dev;struct drm_display_mode mode;@@ -282,9 +282,9 @@ struct exynos_dsi {#define host_to_dsi (host) container_of(host, struct exynos_dsi, dsi_host) -static inline struct exynos_dsi *encoder_to_dsi (struct drm_encoder *e) +static inline struct exynos_dsi *bridge_to_dsi (struct drm_bridge *b) { - return container_of(e, struct exynos_dsi, encoder); + return container_of(b, struct exynos_dsi, bridge); }enum reg_idx {@@ -1358,10 +1358,9 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi) } } -static void exynos_dsi_enable (struct drm_encoder *encoder) +static void exynos_dsi_pre_enable (struct drm_bridge *bridge) { -struct exynos_dsi *dsi =encoder_to_dsi (encoder); -struct drm_bridge *iter; +struct exynos_dsi *dsi =bridge_to_dsi (bridge);int ret;if (dsi->state &DSIM_STATE_ENABLED )@@ -1374,63 +1373,64 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) } dsi->state |=DSIM_STATE_ENABLED ; +} -list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->pre_enable) - iter->funcs->pre_enable (iter); - } +static void exynos_dsi_enable (struct drm_bridge *bridge) +{ +struct exynos_dsi *dsi =bridge_to_dsi (bridge);exynos_dsi_set_display_mode (dsi);exynos_dsi_set_display_enable (dsi, true); -list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->enable) - iter->funcs->enable (iter); - } - dsi->state |=DSIM_STATE_VIDOUT_AVAILABLE ; +return ; } -static void exynos_dsi_disable (struct drm_encoder *encoder) +static void exynos_dsi_disable (struct drm_bridge *bridge) { -struct exynos_dsi *dsi =encoder_to_dsi (encoder); -struct drm_bridge *iter; +struct exynos_dsi *dsi =bridge_to_dsi (bridge);if (!(dsi->state &DSIM_STATE_ENABLED ))return ; dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE ; +} -list_for_each_entry_reverse (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->disable) - iter->funcs->disable (iter); - } +static void exynos_dsi_post_disable (struct drm_bridge *bridge) +{ +struct exynos_dsi *dsi =bridge_to_dsi (bridge);exynos_dsi_set_display_enable (dsi, false); -list_for_each_entry (iter, &dsi->bridge_chain, chain_node) { -if (iter->funcs->post_disable) - iter->funcs->post_disable (iter); - } - dsi->state &= ~DSIM_STATE_ENABLED ;pm_runtime_put_sync (dsi->dev); } -static void exynos_dsi_mode_set (struct drm_encoder *encoder, -struct drm_display_mode *mode, -struct drm_display_mode *adjusted_mode) +static void exynos_dsi_mode_set (struct drm_bridge *bridge, +const struct drm_display_mode *mode, +const struct drm_display_mode *adjusted_mode) { -struct exynos_dsi *dsi =encoder_to_dsi (encoder); +struct exynos_dsi *dsi =bridge_to_dsi (bridge);drm_mode_copy (&dsi->mode, adjusted_mode); } -static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { - .enable = exynos_dsi_enable, - .disable = exynos_dsi_disable, - .mode_set = exynos_dsi_mode_set, +static int exynos_dsi_attach (struct drm_bridge *bridge, +enum drm_bridge_attach_flags flags) +{ +struct exynos_dsi *dsi =bridge_to_dsi (bridge); + +return drm_bridge_attach (bridge->encoder, dsi->out_bridge,NULL , flags); +} + +static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = { + .pre_enable = exynos_dsi_pre_enable, + .enable = exynos_dsi_enable, + .disable = exynos_dsi_disable, + .post_disable = exynos_dsi_post_disable, + .mode_set = exynos_dsi_mode_set, + .attach = exynos_dsi_attach, };MODULE_DEVICE_TABLE (of, exynos_dsi_of_match);@@ -1453,8 +1453,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,DRM_DEV_INFO (dev,"Attached %s device\n" , device->name); -drm_bridge_attach (encoder, dsi->out_bridge,NULL ,0 ); -list_splice_init (&encoder->bridge_chain, &dsi->bridge_chain); +drm_bridge_add (&dsi->bridge); + +drm_bridge_attach (encoder, &dsi->bridge,NULL ,0 );/* * This is a temporary solution and should be made by more generic way. @@ -1493,13 +1494,14 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,if (dsi->out_bridge->funcs->detach) dsi->out_bridge->funcs->detach (dsi->out_bridge); dsi->out_bridge =NULL ; -INIT_LIST_HEAD (&dsi->bridge_chain);if (drm->mode_config.poll_enabled)drm_kms_helper_hotplug_event (drm);exynos_dsi_unregister_te_irq (dsi); +drm_bridge_remove (&dsi->bridge); +return 0 ; }@@ -1583,8 +1585,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,drm_simple_encoder_init (drm_dev, encoder,DRM_MODE_ENCODER_TMDS ); -drm_encoder_helper_add (encoder, &exynos_dsi_encoder_helper_funcs); - ret =exynos_drm_set_possible_crtcs (encoder,EXYNOS_DISPLAY_TYPE_LCD );if (ret <0 )return ret;@@ -1596,9 +1596,8 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master, void *data) {struct exynos_dsi *dsi =dev_get_drvdata (dev); -struct drm_encoder *encoder = &dsi->encoder; -exynos_dsi_disable (encoder); +exynos_dsi_disable (&dsi->bridge);mipi_dsi_host_unregister (&dsi->dsi_host); }@@ -1621,7 +1620,6 @@ static int exynos_dsi_probe(struct platform_device *pdev)init_completion (&dsi->completed);spin_lock_init (&dsi->transfer_lock);INIT_LIST_HEAD (&dsi->transfer_list); -INIT_LIST_HEAD (&dsi->bridge_chain); dsi->dsi_host.ops = &exynos_dsi_ops; dsi->dsi_host.dev = dev;
drivers/gpu/drm/exynos/exynos_drm_dsi.c static int exynos_dsi_probe(struct platform_device *pdev) · line 1696
Quoted 10 lines
drivers/gpu/drm/exynos/exynos_drm_dsi.c +4
-0@@ -1689,6 +1687,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)pm_runtime_enable (dev); + dsi->bridge.funcs = &exynos_dsi_bridge_funcs; + dsi->bridge.of_node = dev->of_node; + dsi->bridge.type =DRM_MODE_CONNECTOR_DSI ; + ret =component_add (dev, &exynos_dsi_component_ops);if (ret) goto err_disable_runtime;
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
PATCH v6 6/6 drm: exynos: dsi: Switch to atomic funcs
In reply to Jagan TekiThe new support drm bridges are moving towards atomic functions.
Replace atomic version of functions to continue the transition to the atomic API.
---
Changes for v6, v5, v4, v3:
- none
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_dsi.c +16 -9
@@ -1358,7 +1358,8 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi) } } -static void exynos_dsi_pre_enable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_pre_enable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);int ret;
@@ -1375,7 +1376,8 @@ static void exynos_dsi_pre_enable(struct drm_bridge *bridge) dsi->state |=DSIM_STATE_ENABLED ; } -static void exynos_dsi_enable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_enable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);
@@ -1387,7 +1389,8 @@ static void exynos_dsi_enable(struct drm_bridge *bridge)return ; } -static void exynos_dsi_disable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_disable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);
@@ -1397,7 +1400,8 @@ static void exynos_dsi_disable(struct drm_bridge *bridge) dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE ; } -static void exynos_dsi_post_disable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_post_disable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);
@@ -1425,10 +1429,13 @@ static int exynos_dsi_attach(struct drm_bridge *bridge, }static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = { - .pre_enable = exynos_dsi_pre_enable, - .enable = exynos_dsi_enable, - .disable = exynos_dsi_disable, - .post_disable = exynos_dsi_post_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_pre_enable = exynos_dsi_atomic_pre_enable, + .atomic_enable = exynos_dsi_atomic_enable, + .atomic_disable = exynos_dsi_atomic_disable, + .atomic_post_disable = exynos_dsi_atomic_post_disable, .mode_set = exynos_dsi_mode_set, .attach = exynos_dsi_attach, };
@@ -1597,7 +1604,7 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master, {struct exynos_dsi *dsi =dev_get_drvdata (dev); -exynos_dsi_disable (&dsi->bridge); +exynos_dsi_atomic_disable (&dsi->bridge,NULL );mipi_dsi_host_unregister (&dsi->dsi_host); }
Signature · 1 line
2.25.1
Re: [PATCH v6 6/6] drm: exynos: dsi: Switch to atomic funcs
Quoted 6 lines · Jagan Teki
The new support drm bridges are moving towards atomic functions.
Replace atomic version of functions to continue the transition to the atomic API.
Signed-off-by Jagan Teki <[email protected]>
Quoted 70 lines
---
Changes for v6, v5, v4, v3:
- nonedrivers/gpu/drm/exynos/exynos_drm_dsi.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)drivers/gpu/drm/exynos/exynos_drm_dsi.c +15
-8@@ -1358,7 +1358,8 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi) } } -static void exynos_dsi_pre_enable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_pre_enable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);int ret;@@ -1375,7 +1376,8 @@ static void exynos_dsi_pre_enable(struct drm_bridge *bridge) dsi->state |=DSIM_STATE_ENABLED ; } -static void exynos_dsi_enable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_enable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);@@ -1387,7 +1389,8 @@ static void exynos_dsi_enable(struct drm_bridge *bridge)return ; } -static void exynos_dsi_disable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_disable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);@@ -1397,7 +1400,8 @@ static void exynos_dsi_disable(struct drm_bridge *bridge) dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE ; } -static void exynos_dsi_post_disable (struct drm_bridge *bridge) +static void exynos_dsi_atomic_post_disable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct exynos_dsi *dsi =bridge_to_dsi (bridge);@@ -1425,10 +1429,13 @@ static int exynos_dsi_attach(struct drm_bridge *bridge, }static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = { - .pre_enable = exynos_dsi_pre_enable, - .enable = exynos_dsi_enable, - .disable = exynos_dsi_disable, - .post_disable = exynos_dsi_post_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_pre_enable = exynos_dsi_atomic_pre_enable, + .atomic_enable = exynos_dsi_atomic_enable, + .atomic_disable = exynos_dsi_atomic_disable, + .atomic_post_disable = exynos_dsi_atomic_post_disable, .mode_set = exynos_dsi_mode_set, .attach = exynos_dsi_attach, };
drivers/gpu/drm/exynos/exynos_drm_dsi.c static void exynos_dsi_unbind(struct device *dev, struct device *master, · line 1610
Quoted 8 lines
drivers/gpu/drm/exynos/exynos_drm_dsi.c +1
-1@@ -1597,7 +1604,7 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master, {struct exynos_dsi *dsi =dev_get_drvdata (dev); -exynos_dsi_disable (&dsi->bridge); +exynos_dsi_atomic_disable (&dsi->bridge,NULL );mipi_dsi_host_unregister (&dsi->dsi_host); }
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Hi Jagan,
Am 03.03.22 um 17:36 schrieb Jagan Teki:
Quoted 12 lines
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPI
Quoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
[1] https://patchwork.amarulasolutions.com/cover/1839
Any inputs?
Thanks for your efforts. I didn't follow the whole history, but I'm looking forward and hope to see upstream support for the i.MX8MM DSIM in the not too distant future.
Can you give me a short update about the state of this patchset? Are there still any major obstacles?
I can't help with testing on Exynos, but if you have the matching follow-up patches for i.MX8MM support somewhere around I could do some tests with those on i.MX8MM.
Thanks
Frieder
Hi Frieder,
Quoted 28 lines · Frieder Schrempf
Hi Jagan,
Am 03.03.22 um 17:36 schrieb Jagan Teki:
Quoted 12 lines
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
[1] https://patchwork.amarulasolutions.com/cover/1839
Any inputs?
Thanks for your efforts. I didn't follow the whole history, but I'm looking forward and hope to see upstream support for the i.MX8MM DSIM in the not too distant future.
Quoted 6 lines
Can you give me a short update about the state of this patchset? Are there still any major obstacles?
I can't help with testing on Exynos, but if you have the matching follow-up patches for i.MX8MM support somewhere around I could do some tests with those on i.MX8MM.
Unfortunately, it is getting slow due to existing exynos dsi drivers. Idea is to push exynos and then move the bridge as per Mailing-list discussion. I have initial series to support i.MX8MM on linux-next [1] which is working on my setup. However I'm waiting for this series to move further to send those on the mailing list. Indeed I'm solely relaying on Marek testing to move further as I too don't have Exynos hardware to validate.
[1] https://github.com/openedev/kernel/tree/imx8mm-dsi
Thanks,
Jagan.
Hi Jagan,
Am 09.03.22 um 15:01 schrieb Jagan Teki:
Quoted 39 lines
Hi Frieder,
Quoted 28 lines · Frieder Schrempf
Hi Jagan,
Am 03.03.22 um 17:36 schrieb Jagan Teki:
Quoted 12 lines
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
Thanks for your efforts. I didn't follow the whole history, but I'm looking forward and hope to see upstream support for the i.MX8MM DSIM in the not too distant future.
Quoted 6 lines
Can you give me a short update about the state of this patchset? Are there still any major obstacles?
I can't help with testing on Exynos, but if you have the matching follow-up patches for i.MX8MM support somewhere around I could do some tests with those on i.MX8MM.
Quoted 7 lines
Unfortunately, it is getting slow due to existing exynos dsi drivers. Idea is to push exynos and then move the bridge as per Mailing-list discussion. I have initial series to support i.MX8MM on linux-next [1] which is working on my setup. However I'm waiting for this series to move further to send those on the mailing list. Indeed I'm solely relaying on Marek testing to move further as I too don't have Exynos hardware to validate.
Thanks for the status update. Let's hope Marek or others with access to the hardware can provide further testing.
And thanks for providing the git tree for i.MX8MM. I will try to do some tests on our hardware.
Thanks
Frieder
Am 10.03.22 um 14:03 schrieb Frieder Schrempf:
Quoted 50 lines
Hi Jagan,
Am 09.03.22 um 15:01 schrieb Jagan Teki:
Quoted 39 lines
Hi Frieder,
Quoted 28 lines · Frieder Schrempf
Hi Jagan,
Am 03.03.22 um 17:36 schrieb Jagan Teki:
Quoted 12 lines
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
Thanks for your efforts. I didn't follow the whole history, but I'm looking forward and hope to see upstream support for the i.MX8MM DSIM in the not too distant future.
Quoted 6 lines
Can you give me a short update about the state of this patchset? Are there still any major obstacles?
I can't help with testing on Exynos, but if you have the matching follow-up patches for i.MX8MM support somewhere around I could do some tests with those on i.MX8MM.
Quoted 7 lines
Unfortunately, it is getting slow due to existing exynos dsi drivers. Idea is to push exynos and then move the bridge as per Mailing-list discussion. I have initial series to support i.MX8MM on linux-next [1] which is working on my setup. However I'm waiting for this series to move further to send those on the mailing list. Indeed I'm solely relaying on Marek testing to move further as I too don't have Exynos hardware to validate.
Quoted 5 lines
Thanks for the status update. Let's hope Marek or others with access to the hardware can provide further testing.
And thanks for providing the git tree for i.MX8MM. I will try to do some tests on our hardware.
Sorry, forgot to say that if you could cc me on future iterations of this patchset and the upcoming i.MX8MM patches, that would be great, thanks!
Quoted 48 lines · Jagan Teki
Hi Frieder,
Quoted 28 lines · Frieder Schrempf
Hi Jagan,
Am 03.03.22 um 17:36 schrieb Jagan Teki:
Quoted 12 lines
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
[1] https://patchwork.amarulasolutions.com/cover/1839
Any inputs?
Thanks for your efforts. I didn't follow the whole history, but I'm looking forward and hope to see upstream support for the i.MX8MM DSIM in the not too distant future.
Quoted 6 lines
Can you give me a short update about the state of this patchset? Are there still any major obstacles?
I can't help with testing on Exynos, but if you have the matching follow-up patches for i.MX8MM support somewhere around I could do some tests with those on i.MX8MM.
Unfortunately, it is getting slow due to existing exynos dsi drivers. Idea is to push exynos and then move the bridge as per Mailing-list discussion. I have initial series to support i.MX8MM on linux-next [1] which is working on my setup. However I'm waiting for this series to move further to send those on the mailing list. Indeed I'm solely relaying on Marek testing to move further as I too don't have Exynos hardware to validate.
Quoted 4 lines
[1] https://github.com/openedev/kernel/tree/imx8mm-dsi
Thanks,
Jagan.
Marek,
Have you had any time to test Jagan's latest series? There are several of us waiting for the exynos series so as to gain support for imx8m MIPI DSI on top of it.
What hardware is required to test this and where can it be found?
Best regards,
Tim
Hi Jagan,
Quoted 12 lines · Jagan Teki
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPI
Quoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other things and I was not able to check the display of the boards with remote access.
Finally, this patchset works properly on all my Exynos-based test systems:
1. Exynos4210 Trats with Samsung s6e8aa0 DSI panel
2. Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
3. Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
4. Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos MIC bridge
I will post my acked-by and tested-by tags for each patch.
Quoted 10 lines
Jagan.
Jagan Teki (6):
drm: bridge: tc358764: Use drmpanel_bridgeAPI
drm: bridge: panel: Reset the connector state pointer
exynos: drm: dsi: Attachin_bridgein MIC driver
drm: exynos: dsi: Use drmpanel_bridgeAPI
drm: exynos: dsi: Convert to bridge driver
drm: exynos: dsi: Switch to atomic funcs
Quoted 6 lines
drivers/gpu/drm/bridge/panel.c | 3 + drivers/gpu/drm/bridge/tc358764.c | 104 +--------- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 241 ++++++------------------ drivers/gpu/drm/exynos/exynos_drm_mic.c | 22 +++ 4 files changed, 93 insertions(+), 277 deletions(-)
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Quoted 36 lines · Marek Szyprowski
Hi Jagan,
Quoted 12 lines · Jagan Teki
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other things and I was not able to check the display of the boards with remote access.
Finally, this patchset works properly on all my Exynos-based test systems:
1. Exynos4210 Trats with Samsung s6e8aa0 DSI panel
2. Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
Quoted 7 lines
3. Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
4. Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos MIC bridge
I will post my acked-by and tested-by tags for each patch.
Thank you so much! I think a lot of people will celebrate when this gets approved and merged. ;-)
adam
Quoted 23 lines
Quoted 12 lines
Jagan.
Jagan Teki (6):
drm: bridge: tc358764: Use drmpanel_bridgeAPI
drm: bridge: panel: Reset the connector state pointer
exynos: drm: dsi: Attachin_bridgein MIC driver
drm: exynos: dsi: Use drmpanel_bridgeAPI
drm: exynos: dsi: Convert to bridge driver
drm: exynos: dsi: Switch to atomic funcsQuoted 6 lines
drivers/gpu/drm/bridge/panel.c | 3 + drivers/gpu/drm/bridge/tc358764.c | 104 +--------- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 241 ++++++------------------ drivers/gpu/drm/exynos/exynos_drm_mic.c | 22 +++ 4 files changed, 93 insertions(+), 277 deletions(-)Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
Robert Foss
AppliedQuoted 41 lines · Adam Ford
Quoted 38 lines · Marek Szyprowski
Hi Jagan,
Quoted 12 lines · Jagan Teki
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other things and I was not able to check the display of the boards with remote access.
Finally, this patchset works properly on all my Exynos-based test systems:
1. Exynos4210 Trats with Samsung s6e8aa0 DSI panel
2. Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
3. Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
Quoted 10 lines
Quoted 5 lines
4. Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos MIC bridge
I will post my acked-by and tested-by tags for each patch.
Thank you so much! I think a lot of people will celebrate when this gets approved and merged. ;-)
Applied to drm-misc-next.
Dear All,
Quoted 41 lines · Robert Foss
Quoted 40 lines · Adam Ford
Quoted 38 lines · Marek Szyprowski
Quoted 12 lines · Jagan Teki
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other things and I was not able to check the display of the boards with remote access.
Finally, this patchset works properly on all my Exynos-based test systems:
1. Exynos4210 Trats with Samsung s6e8aa0 DSI panel
2. Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
3. Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
4. Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos MIC bridge
Quoted 6 lines
Quoted 5 lines
Quoted 1 line
I will post my acked-by and tested-by tags for each patch.
Thank you so much! I think a lot of people will celebrate when this gets approved and merged. ;-)
Applied to drm-misc-next.
Thanks for merging this. Today (once the patches landed in linux-next) I found that there is one more issue left to fix.
On the Exynos4210-based Trats board I get the following error:
# ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault
#
Surprisingly, all other boards, even Exynos4412-based Trats2 with exactly the same DSI controller and panel works fine:
# ./modetest -c -Mexynos Connectors: id encoder status name size (mm) modes encoders 71 70 connected DSI-1 58x103 1 70 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 720x1280 60 720 725 730 735 1280 1293 1295 1296 57153 flags: ; type: preferred, driver props: 1 EDID: flags: immutable blob blobs:
value:
2 DPMS:
flags: enum
enums: On=0 Standby=1 Suspend=2 Off=3
value: 0
5 link-status:
flags: enum
enums: Good=0 Bad=1
value: 0
6 non-desktop:
flags: immutable range
values: 0 1
value: 0
4 TILE:
flags: immutable blob
blobs:
value:
20 CRTC_ID:
flags: object
value: 54
73 0 connected HDMI-A-1 0x0 0 72
props:
1 EDID:
flags: immutable blob
blobs:
value:
2 DPMS:
flags: enum
enums: On=0 Standby=1 Suspend=2 Off=3
value: 0
5 link-status:
flags: enum
enums: Good=0 Bad=1
value: 0
6 non-desktop:
flags: immutable range
values: 0 1
value: 0
4 TILE:
flags: immutable blob
blobs:
value:
20 CRTC_ID:
flags: object
value: 0
(the only difference between Trats and Trats2 is the fact that Trats2 has also HDMI output implemented).
It looks that something is missing in the connector initialization, but I didn't dig enough into it. The emulated framebuffer is properly registered and displayed on the panel.
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Hi Marek,
Quoted 129 lines · Marek Szyprowski
Dear All,
Quoted 41 lines · Robert Foss
Quoted 40 lines · Adam Ford
Quoted 38 lines · Marek Szyprowski
Quoted 12 lines · Jagan Teki
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other things and I was not able to check the display of the boards with remote access.
Finally, this patchset works properly on all my Exynos-based test systems:
1. Exynos4210 Trats with Samsung s6e8aa0 DSI panel
2. Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
3. Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
4. Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos MIC bridge
Quoted 6 lines
Quoted 5 lines
Quoted 1 line
I will post my acked-by and tested-by tags for each patch.
Thank you so much! I think a lot of people will celebrate when this gets approved and merged. ;-)
Applied to drm-misc-next.
Thanks for merging this. Today (once the patches landed in linux-next) I found that there is one more issue left to fix.
On the Exynos4210-based Trats board I get the following error:
# ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault#
Surprisingly, all other boards, even Exynos4412-based Trats2 with exactly the same DSI controller and panel works fine:
# ./modetest -c -Mexynos Connectors: id encoder status name size (mm) modes encoders 71 70 connected DSI-1 58x103 1 70 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 720x1280 60 720 725 730 735 1280 1293 1295 1296 57153 flags: ; type: preferred, driver props: 1 EDID: flags: immutable blob blobs:value: 2 DPMS: flags: enum enums: On=0 Standby=1 Suspend=2 Off=3 value: 0 5 link-status: flags: enum enums: Good=0 Bad=1 value: 0 6 non-desktop: flags: immutable range values: 0 1 value: 0 4 TILE: flags: immutable blob blobs: value: 20 CRTC_ID: flags: object value: 54 73 0 connected HDMI-A-1 0x0 0 72 props: 1 EDID: flags: immutable blob blobs: value: 2 DPMS: flags: enum enums: On=0 Standby=1 Suspend=2 Off=3 value: 0 5 link-status: flags: enum enums: Good=0 Bad=1 value: 0 6 non-desktop: flags: immutable range values: 0 1 value: 0 4 TILE: flags: immutable blob blobs: value: 20 CRTC_ID: flags: object value: 0
Quoted 6 lines
(the only difference between Trats and Trats2 is the fact that Trats2 has also HDMI output implemented).
It looks that something is missing in the connector initialization, but I didn't dig enough into it. The emulated framebuffer is properly registered and displayed on the panel.
Can you please share the full dmesg?
Thanks,
Jagan.
Dear All,
Quoted 64 lines · Marek Szyprowski
Quoted 44 lines · Robert Foss
Quoted 43 lines · Adam Ford
Quoted 41 lines · Marek Szyprowski
Quoted 12 lines · Jagan Teki
Updated series about drm bridge conversion of exynos dsi.
Previous version can be accessible, here [1].
Patch 1: tc358764
panel_bridgeAPIPatch 2: connector reset
Patch 3: bridge attach in MIC
Patch 4:
panel_bridgeAPIQuoted 7 lines
Patch 5: bridge conversion
Patch 6: atomic functions
Any inputs?
I'm really sorry for the delay on my side. I was really busy with other
things and I was not able to check the display of the boards with remote
access.Finally, this patchset works properly on all my Exynos-based test systems:
1. Exynos4210 Trats with Samsung s6e8aa0 DSI panel
2. Exynos4412 Trats2 with Samsung s6e8aa0 DSI panel
3. Exynos5250 Arndale with TC358764 DSI-LVDS bridge and LVDS panel
4. Exynos5433 TM2e with Samsung s6e3hf2 DSI panel and internal Exynos MIC bridge
Quoted 6 lines
Quoted 5 lines
Quoted 1 line
I will post my acked-by and tested-by tags for each patch.
Thank you so much! I think a lot of people will celebrate when this gets approved and merged. ;-)
Applied to drm-misc-next.
Thanks for merging this. Today (once the patches landed in linux-next) I found that there is one more issue left to fix.
On the Exynos4210-based Trats board I get the following error:
# ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault#
Quoted 7 lines
Surprisingly, all other boards, even Exynos4412-based Trats2 with exactly the same DSI controller and panel works fine:
# ./modetest -c -Mexynos Connectors: id encoder status name size (mm) modes encoders 71 70 connected DSI-1 58x103 1 70
This is related to the asynchronous DSI driver registration and DSI device probe.
If the DSI driver has been registered before the DRM component device bind, everything is fine: the DRM connector is created by panel_bridge_attach() and then that connector is registered to userspace by the drm_modeset_register_all() in the last steps of initializing the compound DRM device.
However, when DSI driver is not yet registered during the DRM component bind, the DRM device finishes registration without any connector ('exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes' message). Then, when DSI driver gets registered, the connector is created by panel_brige_attach(), but there is no code, which would call drm_connector_register() to make it available for userspace.
Exactly the same issue has been earlier fixed by the commit deee3284cba3 ("drm/exynos/dsi: register connector if it is created after drm bind").
The following patch fixes this with the current code:
drivers/gpu/drm/bridge/panel.c +3 -0
@@ -86,6 +86,9 @@ static int panel_bridge_attach(struct drm_bridge *bridge, if (connector->funcs->reset) connector->funcs->reset(connector); + if (bridge->dev->registered) + drm_connector_register(connector); + return 0; }
If this is okay, I will send it as a proper patch, tagged as a fix for 934aef885f9d ("drm: bridge: panel: Reset the connector state pointer").
Quoted 58 lines
modes:
name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 720x1280 60 720 725 730 735 1280 1293 1295 1296 57153 flags: ; type:
preferred, driver
props:
1 EDID:
flags: immutable blob
blobs:value:
2 DPMS:
flags: enum
enums: On=0 Standby=1 Suspend=2 Off=3
value: 0
5 link-status:
flags: enum
enums: Good=0 Bad=1
value: 0
6 non-desktop:
flags: immutable range
values: 0 1
value: 0
4 TILE:
flags: immutable blob
blobs:value:
20CRTC_ID:
flags: object
value: 54
73 0 connected HDMI-A-10x00 72 props:
1 EDID:
flags: immutable blob
blobs:value:
2 DPMS:
flags: enum
enums: On=0 Standby=1 Suspend=2 Off=3
value: 0
5 link-status:
flags: enum
enums: Good=0 Bad=1
value: 0
6 non-desktop:
flags: immutable range
values: 0 1
value: 0
4 TILE:
flags: immutable blob
blobs:value:
20CRTC_ID:
flags: object
value: 0
Quoted 6 lines
(the only difference between Trats and Trats2 is the fact that Trats2 has also HDMI output implemented).
It looks that something is missing in the connector initialization, but I didn't dig enough into it. The emulated framebuffer is properly registered and displayed on the panel.
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland