ptp: ocp: Add serial port information to the debug summary
PATCH RESEND 1/1 ptp: ocp: Add serial port information to the debug summary
On the debug summary page, show the /dev/ttyS<port> mapping.
Signed-off-by Jonathan Lemon <[email protected]>
--- drivers/ptp/ptp_ocp.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/ptp/ptp_ocp.c +8 -0
@@ -2109,6 +2109,14 @@ ptp_ocp_summary_show(struct seq_file *s, void *data) sma_out =ioread32 (&bp->sma->gpio2);seq_printf (s,"%7s: /dev/ptp%d\n" ,"PTP" ,ptp_clock_index (bp->ptp)); +if (bp->gnss_port !=-1 ) +seq_printf (s,"%7s: /dev/ttyS%d\n" ,"GNSS1" , bp->gnss_port); +if (bp->gnss2_port !=-1 ) +seq_printf (s,"%7s: /dev/ttyS%d\n" ,"GNSS2" , bp->gnss2_port); +if (bp->mac_port !=-1 ) +seq_printf (s,"%7s: /dev/ttyS%d\n" ,"MAC" , bp->mac_port); +if (bp->nmea_port !=-1 ) +seq_printf (s,"%7s: /dev/ttyS%d\n" ,"NMEA" , bp->nmea_port);sma1_show (dev,NULL , buf);seq_printf (s," sma1: %s" , buf);
Signature · 1 line
2.31.1
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:
Quoted 6 lines · On Thu, 3 Mar 2022 21:46:15 -0800 you wrote:
On the debug summary page, show the /dev/ttyS<port> mapping.
Signed-off-by Jonathan Lemon <[email protected]>--- drivers/ptp/ptp_ocp.c | 8 ++++++++ 1 file changed, 8 insertions(+)
Here is the summary with links:
- [RESEND,net-next] ptp: ocp: Add serial port information to the debug summary
https://git.kernel.org/netdev/net-next/c/61fd7ac21522
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html