Skip to contentSkip to conversation

arm: dts: at91: Fix boolean properties with values

PATCH New Rob Herring 1 participant 1 message Mar 4, 2022

Subsystems (2)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 arm: dts: at91: Fix boolean properties with values

Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter.

It may have been intended that 0 values are false, but there is no change in behavior with this patch.

---
 arch/arm/boot/dts/at91-kizbox3-hs.dts      | 2 +-
 arch/arm/boot/dts/at91-kizbox3_common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/at91-kizbox3-hs.dts +1 -1
index 2799b2a1f4d2..f7d90cf1bb77 100644
@@ -225,7 +225,7 @@ pinctrl_pio_zbe_rst: gpio_zbe_rst {
 		pinctrl_pio_io_reset: gpio_io_reset {
 			pinmux = <PIN_PB30__GPIO>;
 			bias-disable;
-			drive-open-drain = <1>;
+			drive-open-drain;
 			output-low;
 		};
 		pinctrl_pio_input: gpio_input {
arch/arm/boot/dts/at91-kizbox3_common.dtsi +1 -1
index abe27adfa4d6..465664628419 100644
@@ -211,7 +211,7 @@ pinctrl_flx4_default: flx4_i2c6_default {
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
-		drive-open-drain = <1>;
+		drive-open-drain;
 	};
 
 	pinctrl_pwm0 {
Signature · 1 line
2.32.0