board: at91: sama5d2: set blue led on at boot time
PATCH 1/1 board: at91: sama5d2: set blue led on at boot time
From: Mihai Sain <[email protected]>
Set blue led on at boot time in order to highlight that u-boot is loaded. This is done for all sama5d2 based boards which contain an RGB led.
Signed-off-by Mihai Sain <[email protected]>
--- board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 9 +++++++++ board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 9 +++++++++ board/atmel/sama5d2_icp/sama5d2_icp.c | 9 +++++++++ board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c | 9 +++++++++ board/atmel/sama5d2_xplained/sama5d2_xplained.c | 9 +++++++++ 5 files changed, 45 insertions(+)
board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c +9 -0
@@ -22,6 +22,13 @@ extern void at91_pda_detect(void);DECLARE_GLOBAL_DATA_PTR ; +static void rgb_leds_init (void ) +{ +atmel_pio4_set_pio_output (AT91_PIO_PORTA ,10 ,0 );/* LED RED */ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,1 ,0 );/* LED GREEN */ +atmel_pio4_set_pio_output (AT91_PIO_PORTA ,31 ,1 );/* LED BLUE */ +} +#ifdef CONFIG_CMD_USB static void board_usb_hw_init (void ) {
@@ -71,6 +78,8 @@ int board_init(void)/* address of boot parameters */ gd->bd->bi_boot_params = gd->bd->bi_dram[0 ].start +0x100 ; +rgb_leds_init (); +#ifdef CONFIG_CMD_USB board_usb_hw_init ();#endif
board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c +9 -0
@@ -22,6 +22,13 @@ extern void at91_pda_detect(void);DECLARE_GLOBAL_DATA_PTR ; +static void rgb_leds_init (void ) +{ +atmel_pio4_set_pio_output (AT91_PIO_PORTA ,6 ,0 );/* LED RED */ +atmel_pio4_set_pio_output (AT91_PIO_PORTA ,7 ,0 );/* LED GREEN */ +atmel_pio4_set_pio_output (AT91_PIO_PORTA ,8 ,1 );/* LED BLUE */ +} +#ifdef CONFIG_BOARD_LATE_INIT int board_late_init (void ) {
@@ -64,6 +71,8 @@ int board_init(void)/* address of boot parameters */ gd->bd->bi_boot_params =CONFIG_SYS_SDRAM_BASE +0x100 ; +rgb_leds_init (); +return 0 ; }
board/atmel/sama5d2_icp/sama5d2_icp.c +9 -0
@@ -19,6 +19,13 @@DECLARE_GLOBAL_DATA_PTR ; +static void rgb_leds_init (void ) +{ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,0 ,0 );/* LED RED */ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,1 ,0 );/* LED GREEN */ +atmel_pio4_set_pio_output (AT91_PIO_PORTA ,31 ,1 );/* LED BLUE */ +} +int board_late_init (void ) {return 0 ;
@@ -52,6 +59,8 @@ int board_init(void)/* address of boot parameters */ gd->bd->bi_boot_params =CONFIG_SYS_SDRAM_BASE +0x100 ; +rgb_leds_init (); +return 0 ; }
board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c +9 -0
@@ -25,6 +25,13 @@ extern void at91_pda_detect(void);DECLARE_GLOBAL_DATA_PTR ; +static void rgb_leds_init (void ) +{ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,10 ,0 );/* LED RED */ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,8 ,0 );/* LED GREEN */ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,6 ,1 );/* LED BLUE */ +} +#ifdef CONFIG_NAND_ATMEL static void board_nand_hw_init (void ) {
@@ -113,6 +120,8 @@ int board_init(void)/* address of boot parameters */ gd->bd->bi_boot_params =CONFIG_SYS_SDRAM_BASE +0x100 ; +rgb_leds_init (); +#ifdef CONFIG_NAND_ATMEL board_nand_hw_init ();#endif
board/atmel/sama5d2_xplained/sama5d2_xplained.c +9 -0
@@ -21,6 +21,13 @@ extern void at91_pda_detect(void);DECLARE_GLOBAL_DATA_PTR ; +static void rgb_leds_init (void ) +{ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,6 ,1 );/* LED RED */ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,5 ,1 );/* LED GREEN */ +atmel_pio4_set_pio_output (AT91_PIO_PORTB ,0 ,0 );/* LED BLUE */ +} +#ifdef CONFIG_CMD_USB static void board_usb_hw_init (void ) {
@@ -70,6 +77,8 @@ int board_init(void)/* address of boot parameters */ gd->bd->bi_boot_params = gd->bd->bi_dram[0 ].start +0x100 ; +rgb_leds_init (); +#ifdef CONFIG_CMD_USB board_usb_hw_init ();#endif
Signature · 1 line
2.25.1
Quoted 7 lines · Eugen Hristev
From: Mihai Sain <[email protected]>
Set blue led on at boot time in order to highlight that u-boot is loaded. This is done for all sama5d2 based boards which contain an RGB led.
Signed-off-by Mihai Sain <[email protected]>---
Applied to u-boot-at91/next , thanks !