Support pwm driver for aspeed ast26xx
Subsystems (5)
Billy Tsai
reviewercover Support pwm driver for aspeed ast26xx
This series adds driver support for the PWM controller found in Aspeed's AST2600 BMC SoCs, but isn't compatible with the AST2400 and AST2500.
Billy Tsai (3):
pwm: Add Aspeed ast2600 PWM support
pinctrl: Add the pinctrl setting for PWM.
ARM: dts: ast2600: Add PWM to device tree
arch/arm/dts/ast2600-evb.dts | 20 ++ arch/arm/dts/ast2600.dtsi | 95 +++++++++ drivers/pinctrl/aspeed/pinctrl_ast2600.c | 120 +++++++++++ drivers/pwm/Kconfig | 8 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-aspeed.c | 251 +++++++++++++++++++++++ 6 files changed, 495 insertions(+) create mode 100644 drivers/pwm/pwm-aspeed.c
Signature · 1 line
2.25.1
Billy Tsai
reviewerPATCH 1/3 pwm: Add Aspeed ast2600 PWM support
This patch add the support of PWM controller which can be found at aspeed ast2600 soc. The pwm supoorts up to 16 channels and it's part function of multi-function device "pwm-tach controller".
--- drivers/pwm/Kconfig | 8 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-aspeed.c | 251 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 260 insertions(+) create mode 100644 drivers/pwm/pwm-aspeed.c
drivers/pwm/Kconfig +8 -0
@@ -9,6 +9,14 @@ config DM_PWM frequency/period can be controlled along with the proportion of that time that the signal is high. +config PWM_ASPEED + bool "Enable support for the Aspeed PWM" + depends on DM_PWM + help + This PWM is found on Ast2600 SoCs. It supports a programmable period + and duty cycle. It provides 16 channels which can be independently + programmed. + config PWM_AT91 bool "Enable support for PWM found on AT91 SoC's" depends on DM_PWM && ARCH_AT91
drivers/pwm/Makefile +1 -0
@@ -10,6 +10,7 @@ obj-$(CONFIG_DM_PWM) += pwm-uclass.o +obj-$(CONFIG_PWM_ASPEED) += pwm-aspeed.o obj-$(CONFIG_PWM_AT91) += pwm-at91.o obj-$(CONFIG_PWM_CROS_EC) += cros_ec_pwm.o obj-$(CONFIG_PWM_EXYNOS) += exynos_pwm.o
drivers/pwm/pwm-aspeed.c new file +251 -0
251 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support
Quoted 5 lines · Billy Tsai
This patch add the support of PWM controller which can be found at aspeed ast2600 soc. The pwm supoorts up to 16 channels and it's part function of multi-function device "pwm-tach controller".
Quoted 7 lines
Signed-off-by Billy Tsai <[email protected]>--- drivers/pwm/Kconfig | 8 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-aspeed.c | 251 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 260 insertions(+) create mode 100644 drivers/pwm/pwm-aspeed.c
ChiaWei Wang
Reviewed-byRE: [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support
Quoted 19 lines
From: Simon Glass <[email protected]>
Sent: Saturday, March 12, 2022 10:44 AMQuoted 6 lines · Billy Tsai
This patch add the support of PWM controller which can be found at aspeed
ast2600 soc. The pwm supoorts up to 16 channels and it's part function of multi-function device "pwm-tach controller".Quoted 8 lines
Signed-off-by Billy Tsai <[email protected]>--- drivers/pwm/Kconfig | 8 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-aspeed.c | 251 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 260 insertions(+) create mode 100644 drivers/pwm/pwm-aspeed.c
Quoted 1 line
Reviewed-by Simon Glass <[email protected]>
Re: [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support
In reply to Billy TsaiQuoted 7 lines · Billy Tsai
This patch add the support of PWM controller which can be found at aspeed ast2600 soc. The pwm supoorts up to 16 channels and it's part function of multi-function device "pwm-tach controller".
Signed-off-by Billy Tsai <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Chia-Wei Wang <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
Billy Tsai
reviewerPATCH 2/3 pinctrl: Add the pinctrl setting for PWM.
In reply to Billy TsaiThis patchs add the signal description array for PWM pinctrl settings.
--- arch/arm/dts/ast2600.dtsi | 80 +++++++++++++++ drivers/pinctrl/aspeed/pinctrl_ast2600.c | 120 +++++++++++++++++++++++ 2 files changed, 200 insertions(+)
arch/arm/dts/ast2600.dtsi +80 -0
@@ -1626,6 +1626,86 @@ groups = "PWM7"; }; + pinctrl_pwm8g0_default: pwm8g0_default { + function = "PWM8G0"; + groups = "PWM8G0"; + }; + + pinctrl_pwm8g1_default: pwm8g1_default { + function = "PWM8G1"; + groups = "PWM8G1"; + }; + + pinctrl_pwm9g0_default: pwm9g0_default { + function = "PWM9G0"; + groups = "PWM9G0"; + }; + + pinctrl_pwm9g1_default: pwm9g1_default { + function = "PWM9G1"; + groups = "PWM9G1"; + }; + + pinctrl_pwm10g0_default: pwm10g0_default { + function = "PWM10G0"; + groups = "PWM10G0"; + }; + + pinctrl_pwm10g1_default: pwm10g1_default { + function = "PWM10G1"; + groups = "PWM10G1"; + }; + + pinctrl_pwm11g0_default: pwm11g0_default { + function = "PWM11G0"; + groups = "PWM11G0"; + }; + + pinctrl_pwm11g1_default: pwm11g1_default { + function = "PWM11G1"; + groups = "PWM11G1"; + }; + + pinctrl_pwm12g0_default: pwm12g0_default { + function = "PWM12G0"; + groups = "PWM12G0"; + }; + + pinctrl_pwm12g1_default: pwm12g1_default { + function = "PWM12G1"; + groups = "PWM12G1"; + }; + + pinctrl_pwm13g0_default: pwm13g0_default { + function = "PWM13G0"; + groups = "PWM13G0"; + }; + + pinctrl_pwm13g1_default: pwm13g1_default { + function = "PWM13G1"; + groups = "PWM13G1"; + }; + + pinctrl_pwm14g0_default: pwm14g0_default { + function = "PWM14G0"; + groups = "PWM14G0"; + }; + + pinctrl_pwm14g1_default: pwm14g1_default { + function = "PWM14G1"; + groups = "PWM14G1"; + }; + + pinctrl_pwm15g0_default: pwm15g0_default { + function = "PWM15G0"; + groups = "PWM15G0"; + }; + + pinctrl_pwm15g1_default: pwm15g1_default { + function = "PWM15G1"; + groups = "PWM15G1"; + }; + pinctrl_rgmii1_default: rgmii1_default { function = "RGMII1"; groups = "RGMII1";
drivers/pinctrl/aspeed/pinctrl_ast2600.c +120 -0
132 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.
Quoted 9 lines · Billy Tsai
This patchs add the signal description array for PWM pinctrl settings.
Signed-off-by Billy Tsai <[email protected]>--- arch/arm/dts/ast2600.dtsi | 80 +++++++++++++++ drivers/pinctrl/aspeed/pinctrl_ast2600.c | 120 +++++++++++++++++++++++ 2 files changed, 200 insertions(+)
ChiaWei Wang
Reviewed-byRE: [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.
Quoted 7 lines
From: Simon Glass <[email protected]>
Sent: Saturday, March 12, 2022 10:44 AMQuoted 3 lines · Billy Tsai
This patchs add the signal description array for PWM pinctrl settings.
Quoted 8 lines
Quoted 6 lines
Signed-off-by Billy Tsai <[email protected]>--- arch/arm/dts/ast2600.dtsi | 80 +++++++++++++++ drivers/pinctrl/aspeed/pinctrl_ast2600.c | 120 +++++++++++++++++++++++ 2 files changed, 200 insertions(+)Reviewed-by Simon Glass <[email protected]>
Re: [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.
In reply to Billy TsaiQuoted 5 lines · Billy Tsai
This patchs add the signal description array for PWM pinctrl settings.
Signed-off-by Billy Tsai <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Chia-Wei Wang <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
Billy Tsai
reviewerPATCH 3/3 ARM: dts: ast2600: Add PWM to device tree
In reply to Billy TsaiAdd the PWM node and enable it for AST2600 EVB
--- arch/arm/dts/ast2600-evb.dts | 20 ++++++++++++++++++++ arch/arm/dts/ast2600.dtsi | 15 +++++++++++++++ 2 files changed, 35 insertions(+)
arch/arm/dts/ast2600-evb.dts +20 -0
@@ -37,6 +37,26 @@ }; }; +&pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default + &pinctrl_pwm8g1_default + &pinctrl_pwm9g1_default + &pinctrl_pwm10g1_default + &pinctrl_pwm11g1_default + &pinctrl_pwm12g1_default + &pinctrl_pwm13g1_default + &pinctrl_pwm14g1_default>; +}; + &uart5 { u-boot,dm-pre-reloc; status = "okay";
arch/arm/dts/ast2600.dtsi +15 -0
@@ -113,6 +113,21 @@ reg = < 0x1e600000 0x100>; }; + pwm_tach: pwm_tach@1e610000 { + compatible = "aspeed,ast2600-pwm-tach", "simple-mfd", "syscon"; + reg = <0x1e610000 0x100>; + clocks = <&scu ASPEED_CLK_AHB>; + resets = <&rst ASPEED_RESET_PWM>; + + pwm: pwm { + compatible = "aspeed,ast2600-pwm"; + #pwm-cells = <3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + fmc: flash-controller@1e620000 { reg = < 0x1e620000 0xc4 0x20000000 0x10000000 >;
Signature · 1 line
2.25.1
Re: [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree
Quoted 9 lines · Billy Tsai
Add the PWM node and enable it for AST2600 EVB
Signed-off-by Billy Tsai <[email protected]>--- arch/arm/dts/ast2600-evb.dts | 20 ++++++++++++++++++++ arch/arm/dts/ast2600.dtsi | 15 +++++++++++++++ 2 files changed, 35 insertions(+)
ChiaWei Wang
Reviewed-byRE: [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree
Quoted 7 lines
From: Simon Glass <[email protected]>
Sent: Saturday, March 12, 2022 10:44 AMQuoted 3 lines · Billy Tsai
Add the PWM node and enable it for AST2600 EVB
Quoted 8 lines
Quoted 6 lines
Signed-off-by Billy Tsai <[email protected]>--- arch/arm/dts/ast2600-evb.dts | 20 ++++++++++++++++++++ arch/arm/dts/ast2600.dtsi | 15 +++++++++++++++ 2 files changed, 35 insertions(+)Reviewed-by Simon Glass <[email protected]>
Re: [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree
In reply to Billy TsaiQuoted 5 lines · Billy Tsai
Add the PWM node and enable it for AST2600 EVB
Signed-off-by Billy Tsai <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Chia-Wei Wang <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom