Skip to contentSkip to conversation

mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600

PATCH Superseded Potin Lai 1 participant 1 message Mar 8, 2022

Subsystems (3)
lore
Share & tools
lore

Potin Lai

author
#0 lore raw

PATCH v2 1/1 mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600

In AST2600, the unit of SPI CEx decoding range register is 1MB, and end address offset is set to the acctual offset - 1MB. If the flash only has 1MB, the end address will has same value as start address, which will causing unexpected errors.

This patch set the decoding size to at least 2MB to avoid decoding errors.

Tested:
root at bletchley:~# dmesg | grep "aspeed-smc 1e631000.spi: CE0 window"

[   59.328134] aspeed-smc 1e631000.spi: CE0 window resized to 2MB (AST2600 Decoding)
[   59.343001] aspeed-smc 1e631000.spi: CE0 window [ 0x50000000 - 0x50200000 ] 2MB

root at bletchley:~# devmem 0x1e631030
0x00100000

---
[v1]: https://lore.kernel.org/all/20220304170757.16924-1-potin.lai at quantatw.com/

Changes v1 --> v2:
- add fmc controller into decoding range resize checking

---
 drivers/mtd/spi-nor/controllers/aspeed-smc.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/mtd/spi-nor/controllers/aspeed-smc.c +12 -0
index 416ea247f843..74fa46439246 100644
@@ -781,6 +781,18 @@ static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
 			 chip->cs, size >> 20);
 	}
 
+	/*
+	 * The decoding size of AST2600 SPI controller should set at
+	 * least 2MB.
+	 */
+	if ((controller->info == &spi_2600_info ||
+	     controller->info == &fmc_2600_info) && size < SZ_2M) {
+		size = SZ_2M;
+		dev_info(chip->nor.dev,
+			 "CE%d window resized to %dMB (AST2600 Decoding)",
+			 chip->cs, size >> 20);
+	}
+
 	ahb_base_phy = controller->ahb_base_phy;
 
 	/*
Signature · 1 line
2.17.1