dmaengine: dw-axi-dmac: cleanup comments
Subsystems (2)
PATCH 1/1 dmaengine: dw-axi-dmac: cleanup comments
From: Tom Rix <[email protected]>
For spdx, /* */ for *.h, remove extra space
Replacements
configurarion to configuration
inerrupts to interrupts
chanels to channels
Signed-off-by Tom Rix <[email protected]>
--- drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++---- drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +4 -4
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0 // (C) 2017-2018 Synopsys, Inc. (www.synopsys.com) /*
@@ -35,7 +35,7 @@/* * The set of bus widths supported by the DMA controller. DW AXI DMAC supports * master data bus width up to 512 bits (for both AXI master interfaces), but -* it depends on IP block configurarion. +* it depends on IP block configuration. */ #define AXI_DMA_BUSWIDTHS \ (DMA_SLAVE_BUSWIDTH_1_BYTE | \
@@ -1089,10 +1089,10 @@ static irqreturn_t dw_axi_dma_interrupt(int irq, void *dev_id)u32 status, i; -/* Disable DMAC inerrupts. We'll enable them after processing chanels */ +/* Disable DMAC interrupts. We'll enable them after processing channels */ axi_dma_irq_disable (chip); -/* Poll, clear and process every chanel interrupt status */ +/* Poll, clear and process every channel interrupt status */ for (i =0 ; i < dw->hdata->nr_channels; i++) { chan = &dw->chan[i]; status =axi_chan_irq_read (chan);
drivers/dma/dw-axi-dmac/dw-axi-dmac.h +1 -1
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // (C) 2017-2018 Synopsys, Inc. (www.synopsys.com) /*
Signature · 1 line
2.26.3
Quoted 8 lines · On 08-03-22, 18:00, [email protected] wrote:
From: Tom Rix <[email protected]>
For spdx, /* */ for *.h, remove extra space
Replacements
configurarion to configuration
inerrupts to interrupts
chanels to channels
Applied, thanks
Signature · 1 line
~Vinod