Add toprgu reset-controller support for MT7986
cover Add toprgu reset-controller support for MT7986
These patches aim to add watchdog toprgu reset-controller support for MT7986.
Sam Shih (2):
dt-bindings: reset: mt7986: Add reset-controller header file
watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
drivers/watchdog/mtk_wdt.c | 6 +++ include/dt-bindings/reset/mt7986-resets.h | 55 +++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 include/dt-bindings/reset/mt7986-resets.h
Signature · 1 line
2.29.2
PATCH 1/2 dt-bindings: reset: mt7986: Add reset-controller header file
Add infracfg, toprgu, and ethsys reset-controller header file for MT7986 platform.
--- include/dt-bindings/reset/mt7986-resets.h | 55 +++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/dt-bindings/reset/mt7986-resets.h
include/dt-bindings/reset/mt7986-resets.h new file +55 -0
@@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* +* Copyright (c) 2022 MediaTek Inc. +* Author: Sam Shih <[email protected]> +*/ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7986 +#define _DT_BINDINGS_RESET_CONTROLLER_MT7986 + +/* INFRACFG resets */ +#define MT7986_INFRACFG_PEXTP_MAC_SW_RST 6 +#define MT7986_INFRACFG_SSUSB_SW_RST 7 +#define MT7986_INFRACFG_EIP97_SW_RST 8 +#define MT7986_INFRACFG_AUDIO_SW_RST 13 +#define MT7986_INFRACFG_CQ_DMA_SW_RST 14 + +#define MT7986_INFRACFG_TRNG_SW_RST 17 +#define MT7986_INFRACFG_AP_DMA_SW_RST 32 +#define MT7986_INFRACFG_I2C_SW_RST 33 +#define MT7986_INFRACFG_NFI_SW_RST 34 +#define MT7986_INFRACFG_SPI0_SW_RST 35 +#define MT7986_INFRACFG_SPI1_SW_RST 36 +#define MT7986_INFRACFG_UART0_SW_RST 37 +#define MT7986_INFRACFG_UART1_SW_RST 38 +#define MT7986_INFRACFG_UART2_SW_RST 39 +#define MT7986_INFRACFG_AUXADC_SW_RST 43 + +#define MT7986_INFRACFG_APXGPT_SW_RST 66 +#define MT7986_INFRACFG_PWM_SW_RST 68 + +#define MT7986_INFRACFG_SW_RST_NUM 69 + +/* TOPRGU resets */ +#define MT7986_TOPRGU_APMIXEDSYS_SW_RST 0 +#define MT7986_TOPRGU_SGMII0_SW_RST 1 +#define MT7986_TOPRGU_SGMII1_SW_RST 2 +#define MT7986_TOPRGU_INFRA_SW_RST 3 +#define MT7986_TOPRGU_U2PHY_SW_RST 5 +#define MT7986_TOPRGU_PCIE_SW_RST 6 +#define MT7986_TOPRGU_SSUSB_SW_RST 7 +#define MT7986_TOPRGU_ETHDMA_SW_RST 20 +#define MT7986_TOPRGU_CONSYS_SW_RST 23 + +#define MT7986_TOPRGU_SW_RST_NUM 24 + +/* ETHSYS Subsystem resets */ +#define MT7986_ETHSYS_FE_SW_RST 6 +#define MT7986_ETHSYS_PMTR_SW_RST 8 +#define MT7986_ETHSYS_GMAC_SW_RST 23 +#define MT7986_ETHSYS_PPE0_SW_RST 30 +#define MT7986_ETHSYS_PPE1_SW_RST 31 + +#define MT7986_ETHSYS_SW_RST_NUM 32 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7986 */
Signature · 1 line
2.29.2
Re: [PATCH 1/2] dt-bindings: reset: mt7986: Add reset-controller header file
Quoted 9 lines · Sam Shih
Add infracfg, toprgu, and ethsys reset-controller header file for MT7986 platform.
Signed-off-by Sam Shih <[email protected]>--- include/dt-bindings/reset/mt7986-resets.h | 55 +++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/dt-bindings/reset/mt7986-resets.h
Re: [PATCH 1/2] dt-bindings: reset: mt7986: Add reset-controller header file
In reply to Sam ShihQuoted 5 lines · Sam Shih
Add infracfg, toprgu, and ethsys reset-controller header file for MT7986 platform.
Signed-off-by Sam Shih <[email protected]>Acked-by Rob Herring <[email protected]>
Quoted 56 lines
--- include/dt-bindings/reset/mt7986-resets.h | 55 +++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/dt-bindings/reset/mt7986-resets.hinclude/dt-bindings/reset/mt7986-resets.h new file +45
-0@@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* +* Copyright (c) 2022 MediaTek Inc. +* Author: Sam Shih <[email protected]> +*/ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7986 +#define _DT_BINDINGS_RESET_CONTROLLER_MT7986 + +/* INFRACFG resets */ +#define MT7986_INFRACFG_PEXTP_MAC_SW_RST 6 +#define MT7986_INFRACFG_SSUSB_SW_RST 7 +#define MT7986_INFRACFG_EIP97_SW_RST 8 +#define MT7986_INFRACFG_AUDIO_SW_RST 13 +#define MT7986_INFRACFG_CQ_DMA_SW_RST 14 + +#define MT7986_INFRACFG_TRNG_SW_RST 17 +#define MT7986_INFRACFG_AP_DMA_SW_RST 32 +#define MT7986_INFRACFG_I2C_SW_RST 33 +#define MT7986_INFRACFG_NFI_SW_RST 34 +#define MT7986_INFRACFG_SPI0_SW_RST 35 +#define MT7986_INFRACFG_SPI1_SW_RST 36 +#define MT7986_INFRACFG_UART0_SW_RST 37 +#define MT7986_INFRACFG_UART1_SW_RST 38 +#define MT7986_INFRACFG_UART2_SW_RST 39 +#define MT7986_INFRACFG_AUXADC_SW_RST 43 + +#define MT7986_INFRACFG_APXGPT_SW_RST 66 +#define MT7986_INFRACFG_PWM_SW_RST 68 + +#define MT7986_INFRACFG_SW_RST_NUM 69 + +/* TOPRGU resets */ +#define MT7986_TOPRGU_APMIXEDSYS_SW_RST 0 +#define MT7986_TOPRGU_SGMII0_SW_RST 1 +#define MT7986_TOPRGU_SGMII1_SW_RST 2 +#define MT7986_TOPRGU_INFRA_SW_RST 3 +#define MT7986_TOPRGU_U2PHY_SW_RST 5 +#define MT7986_TOPRGU_PCIE_SW_RST 6 +#define MT7986_TOPRGU_SSUSB_SW_RST 7 +#define MT7986_TOPRGU_ETHDMA_SW_RST 20 +#define MT7986_TOPRGU_CONSYS_SW_RST 23 + +#define MT7986_TOPRGU_SW_RST_NUM 24 +
include/dt-bindings/reset/mt7986-resets.h line 55
Quoted 10 lines
include/dt-bindings/reset/mt7986-resets.h new file +10
-0+/* ETHSYS Subsystem resets */ +#define MT7986_ETHSYS_FE_SW_RST 6 +#define MT7986_ETHSYS_PMTR_SW_RST 8 +#define MT7986_ETHSYS_GMAC_SW_RST 23 +#define MT7986_ETHSYS_PPE0_SW_RST 30 +#define MT7986_ETHSYS_PPE1_SW_RST 31 + +#define MT7986_ETHSYS_SW_RST_NUM 32 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7986 */
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
PATCH 2/2 watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
In reply to Sam ShihBesides watchdog, the mt7986 toprgu module also provides software reset functionality for various peripheral subsystems
(eg, ethernet, pcie, and connectivity)
--- drivers/watchdog/mtk_wdt.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/watchdog/mtk_wdt.c +6 -0
@@ -10,6 +10,7 @@*/ #include <dt-bindings/reset/mt2712-resets.h> +#include <dt-bindings/reset/mt7986-resets.h> #include <dt-bindings/reset/mt8183-resets.h> #include <dt-bindings/reset/mt8192-resets.h> #include <dt-bindings/reset/mt8195-resets.h>
@@ -76,6 +77,10 @@ static const struct mtk_wdt_data mt2712_data = { .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, }; +static const struct mtk_wdt_data mt7986_data = { + .toprgu_sw_rst_num =MT7986_TOPRGU_SW_RST_NUM , +}; +static const struct mtk_wdt_data mt8183_data = { .toprgu_sw_rst_num =MT8183_TOPRGU_SW_RST_NUM , };
@@ -418,6 +423,7 @@ static int mtk_wdt_resume(struct device *dev)static const struct of_device_id mtk_wdt_dt_ids[] = { { .compatible ="mediatek,mt2712-wdt" , .data = &mt2712_data }, { .compatible ="mediatek,mt6589-wdt" }, + { .compatible ="mediatek,mt7986-wdt" , .data = &mt7986_data }, { .compatible ="mediatek,mt8183-wdt" , .data = &mt8183_data }, { .compatible ="mediatek,mt8192-wdt" , .data = &mt8192_data }, { .compatible ="mediatek,mt8195-wdt" , .data = &mt8195_data },
Signature · 1 line
2.29.2
Re: [PATCH 2/2] watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
Quoted 5 lines · Sam Shih
Besides watchdog, the mt7986 toprgu module also provides software reset functionality for various peripheral subsystems
(eg, ethernet, pcie, and connectivity)Signed-off-by Sam Shih <[email protected]>
Quoted 36 lines
--- drivers/watchdog/mtk_wdt.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/watchdog/mtk_wdt.c +6
-0@@ -10,6 +10,7 @@*/ #include <dt-bindings/reset/mt2712-resets.h> +#include <dt-bindings/reset/mt7986-resets.h> #include <dt-bindings/reset/mt8183-resets.h> #include <dt-bindings/reset/mt8192-resets.h> #include <dt-bindings/reset/mt8195-resets.h> @@ -76,6 +77,10 @@ static const struct mtk_wdt_data mt2712_data = { .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, }; +static const struct mtk_wdt_data mt7986_data = { + .toprgu_sw_rst_num =MT7986_TOPRGU_SW_RST_NUM , +}; +static const struct mtk_wdt_data mt8183_data = { .toprgu_sw_rst_num =MT8183_TOPRGU_SW_RST_NUM , };@@ -418,6 +423,7 @@ static int mtk_wdt_resume(struct device *dev)static const struct of_device_id mtk_wdt_dt_ids[] = { { .compatible ="mediatek,mt2712-wdt" , .data = &mt2712_data }, { .compatible ="mediatek,mt6589-wdt" }, + { .compatible ="mediatek,mt7986-wdt" , .data = &mt7986_data }, { .compatible ="mediatek,mt8183-wdt" , .data = &mt8183_data }, { .compatible ="mediatek,mt8192-wdt" , .data = &mt8192_data }, { .compatible ="mediatek,mt8195-wdt" , .data = &mt8195_data },
Re: [PATCH 2/2] watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
In reply to Sam ShihQuoted 5 lines · Sam Shih
Besides watchdog, the mt7986 toprgu module also provides software reset functionality for various peripheral subsystems
(eg, ethernet, pcie, and connectivity)Signed-off-by Sam Shih <[email protected]>
Quoted 36 lines
--- drivers/watchdog/mtk_wdt.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/watchdog/mtk_wdt.c +6
-0@@ -10,6 +10,7 @@*/ #include <dt-bindings/reset/mt2712-resets.h> +#include <dt-bindings/reset/mt7986-resets.h> #include <dt-bindings/reset/mt8183-resets.h> #include <dt-bindings/reset/mt8192-resets.h> #include <dt-bindings/reset/mt8195-resets.h> @@ -76,6 +77,10 @@ static const struct mtk_wdt_data mt2712_data = { .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM, }; +static const struct mtk_wdt_data mt7986_data = { + .toprgu_sw_rst_num =MT7986_TOPRGU_SW_RST_NUM , +}; +static const struct mtk_wdt_data mt8183_data = { .toprgu_sw_rst_num =MT8183_TOPRGU_SW_RST_NUM , };@@ -418,6 +423,7 @@ static int mtk_wdt_resume(struct device *dev)static const struct of_device_id mtk_wdt_dt_ids[] = { { .compatible ="mediatek,mt2712-wdt" , .data = &mt2712_data }, { .compatible ="mediatek,mt6589-wdt" }, + { .compatible ="mediatek,mt7986-wdt" , .data = &mt7986_data }, { .compatible ="mediatek,mt8183-wdt" , .data = &mt8183_data }, { .compatible ="mediatek,mt8192-wdt" , .data = &mt8192_data }, { .compatible ="mediatek,mt8195-wdt" , .data = &mt8195_data },