Skip to contentSkip to conversation

staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

PATCH Superseded Arınç ÜNAL 1 participant 2 messages Mar 10, 2022

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the schematics of the device for more information.

LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.

Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.

Misc fixes:
- Fix formatting.
- Use the status value "okay".

---
v2: Use the status value "okay" as it's the official proper spelling.

---
 drivers/staging/mt7621-dts/gbpc1.dts | 35 ++++++++++++----------------
 1 file changed, 15 insertions(+), 20 deletions(-)
drivers/staging/mt7621-dts/gbpc1.dts +15 -20
index 1b5175e6ccf3..ce70dae1fc91 100644
@@ -38,24 +38,16 @@ reset {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		system {
-			label = "gb-pc1:green:system";
+		power {
+			label = "green:power";
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
 		};
 
-		status {
-			label = "gb-pc1:green:status";
+		system {
+			label = "green:system";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "gb-pc1:green:lan1";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "gb-pc1:green:lan2";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
@@ -97,7 +89,6 @@ partition@50000 {
 			label = "firmware";
 			reg = <0x50000 0x1FB0000>;
 		};
-
 	};
 };
 
@@ -106,9 +97,12 @@ &pcie {
 };
 
 &pinctrl {
-	state_default: pinctrl0 {
-		default_gpio: gpio {
-			groups = "wdt", "rgmii2", "uart3";
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: state-default {
+		gpio-pinmux {
+			groups = "rgmii2", "uart3", "wdt";
 			function = "gpio";
 		};
 	};
@@ -121,12 +115,13 @@ &ethernet {
 &switch0 {
 	ports {
 		port@0 {
+			status = "okay";
 			label = "ethblack";
-			status = "ok";
 		};
+
 		port@4 {
+			status = "okay";
 			label = "ethblue";
-			status = "ok";
 		};
 	};
 };
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 2/2 staging: mt7621-dts: fix GB-PC2 devicetree

Fix the GB-PC2 devicetree. Refer to the schematics of the device for more information.

GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".

---
v2: Use the status value "okay" as it's the official proper spelling.

---
 drivers/staging/mt7621-dts/gbpc2.dts | 109 +++++++++++++++++++++++++--
 1 file changed, 101 insertions(+), 8 deletions(-)
drivers/staging/mt7621-dts/gbpc2.dts +101 -8
index 03d6bb6735ac..5753c678783d 100644
@@ -1,28 +1,121 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /dts-v1/;
 
-#include "gbpc1.dts"
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
 	model = "GB-PC2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus: palmbus@1e000000 {
+		i2c@900 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
 };
 
-&default_gpio {
-	groups = "wdt", "uart3";
-	function = "gpio";
+&sdhci {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		broken-flash-reset;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x1FB0000>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: state-default {
+		gpio-pinmux {
+			groups = "wdt";
+			function = "gpio";
+		};
+	};
 };
 
 &ethernet {
 	gmac1: mac@1 {
-		status = "ok";
-		phy-handle = <&phy_external>;
+		status = "okay";
+		phy-handle = <&ethphy7>;
 	};
 
 	mdio-bus {
-		phy_external: ethernet-phy@5 {
-			reg = <5>;
+		ethphy7: ethernet-phy@7 {
+			reg = <7>;
 			phy-mode = "rgmii-rxid";
 		};
 	};
 };
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "ethblack";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "ethblue";
+		};
+	};
+};
Signature · 1 line
2.25.1