arm64: dts: imx8mp: Add missing speed grade phandle
Subsystems (2)
PATCH 1/2 arm64: dts: imx8mp: Add missing speed grade phandle
And missing speed grade phandle to cpu@0 node.
Signed-off-by Marek Vasut <[email protected]>
Cc Anson Huang <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Peng Fan <[email protected]>
Cc Shawn Guo <[email protected]>
Cc NXP Linux Team <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +2 -0
@@ -58,6 +58,8 @@ A53_0: cpu@0 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; #cooling-cells = <2>; };
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/2 arm64: dts: imx8mp: Add cpu-freq support
Add A53 OPP table and cpu regulator to support cpu-freq driver.
Signed-off-by Marek Vasut <[email protected]>
Cc Anson Huang <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Peng Fan <[email protected]>
Cc Shawn Guo <[email protected]>
Cc NXP Linux Team <[email protected]>
To: [email protected]
---
Note: the commit message is partly copied from MX8MN
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 33 +++++++++++++++++++++++ 1 file changed, 33 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +33 -0
@@ -60,6 +60,7 @@ A53_0: cpu@0 { next-level-cache = <&A53_L2>; nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; };
@@ -77,6 +78,7 @@ A53_1: cpu@1 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; };
@@ -94,6 +96,7 @@ A53_2: cpu@2 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; };
@@ -111,6 +114,7 @@ A53_3: cpu@3 { d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; };
@@ -123,6 +127,35 @@ A53_L2: l2-cache0 { }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0x8a0>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <950000>; + opp-supported-hw = <0xa0>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x20>, <0x3>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 9 lines · Marek Vasut
And missing speed grade phandle to cpu@0 node.
Signed-off-by Marek Vasut <[email protected]>Cc Anson Huang <[email protected]>Cc Fabio Estevam <[email protected]>Cc Peng Fan <[email protected]>Cc Shawn Guo <[email protected]>Cc NXP Linux Team <[email protected]>
Applied both, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel