Skip to contentSkip to conversation

remoteproc: mediatek: fix side effect of mt8195 sram power on

PATCH Superseded Tinghan Shen 4 participants 7 messages Mar 11, 2022 – Mar 14, 2022

Subsystems (2)

v2 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 remoteproc: mediatek: fix side effect of mt8195 sram power on

The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192.

L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM.

L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP. These bits have to be powered on to allow EMI access for SCP.

Bits[7:4] also affect audio DSP because audio DSP and SCP are placed on the same hardware bus. If SCP cannot access EMI, audio DSP is blocked too.

L1TCM_SRAM_PDN bits[31:8] are not used.

This fix removes modification of bits[7:4] when power on/off mt8195 SCP L1TCM. It's because the modification introduces a short period of time blocking audio DSP to access EMI. This was not a problem until we have to load both SCP module and audio DSP module. audio DSP needs to access EMI because it has source/data on DRAM. Audio DSP will have unexpected behavior when it accesses EMI and the SCP driver blocks the EMI path at the same time.

---
 drivers/remoteproc/mtk_common.h |  2 +
 drivers/remoteproc/mtk_scp.c    | 67 +++++++++++++++++++++++++--------
 2 files changed, 53 insertions(+), 16 deletions(-)
drivers/remoteproc/mtk_common.h +2 -0
index 5ff3867c72f3..ff954a06637c 100644
@@ -51,6 +51,8 @@
 #define MT8192_CORE0_WDT_IRQ		0x10030
 #define MT8192_CORE0_WDT_CFG		0x10034
 
+#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS		GENMASK(7, 4)
+
 #define SCP_FW_VER_LEN			32
 #define SCP_SHARE_BUFFER_SIZE		288
 
drivers/remoteproc/mtk_scp.c +51 -16

106 lines not on this page · raw message

Signature · 1 line
2.18.0
#1 lore raw

Il 11/03/22 13:30, Tinghan Shen ha scritto:

Quoted 95 lines

The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192.

L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM.

L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP. These bits have to be powered on to allow EMI access for SCP.

Bits[7:4] also affect audio DSP because audio DSP and SCP are placed on the same hardware bus. If SCP cannot access EMI, audio DSP is blocked too.

L1TCM_SRAM_PDN bits[31:8] are not used.

This fix removes modification of bits[7:4] when power on/off mt8195 SCP L1TCM. It's because the modification introduces a short period of time blocking audio DSP to access EMI. This was not a problem until we have to load both SCP module and audio DSP module. audio DSP needs to access EMI because it has source/data on DRAM. Audio DSP will have unexpected behavior when it accesses EMI and the SCP driver blocks the EMI path at the same time.

---
  drivers/remoteproc/mtk_common.h |  2 +
  drivers/remoteproc/mtk_scp.c    | 67 +++++++++++++++++++++++++--------
  2 files changed, 53 insertions(+), 16 deletions(-)
drivers/remoteproc/mtk_common.h +2 -0
index 5ff3867c72f3..ff954a06637c 100644
@@ -51,6 +51,8 @@
  #define MT8192_CORE0_WDT_IRQ		0x10030
  #define MT8192_CORE0_WDT_CFG		0x10034
 
+#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS		GENMASK(7, 4)
+
  #define SCP_FW_VER_LEN			32
  #define SCP_SHARE_BUFFER_SIZE		288
 
drivers/remoteproc/mtk_scp.c +19 -9
index dcddb33e9997..086cf8263f6c 100644
@@ -365,22 +365,22 @@ static int mt8183_scp_before_load(struct mtk_scp *scp)
  	return 0;
  }
 
-static void mt8192_power_on_sram(void __iomem *addr)
+static void scp_sram_power_on(void __iomem *addr, u32 reserved_mask)
  {
  	int i;
 
  	for (i = 31; i >= 0; i--)
-		writel(GENMASK(i, 0), addr);
+		writel(GENMASK(i, 0) & ~reserved_mask, addr);
  	writel(0, addr);
  }
 
-static void mt8192_power_off_sram(void __iomem *addr)
+static void scp_sram_power_off(void __iomem *addr, u32 reserved_mask)
  {
  	int i;
 
  	writel(0, addr);
  	for (i = 0; i < 32; i++)
-		writel(GENMASK(i, 0), addr);
+		writel(GENMASK(i, 0) & ~reserved_mask, addr);
  }
 
  static int mt8192_scp_before_load(struct mtk_scp *scp)
@@ -391,11 +391,32 @@ static int mt8192_scp_before_load(struct mtk_scp *scp)
  	writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
 
  	/* enable SRAM clock */
-	mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0);
-	mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1);
-	mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2);
-	mt8192_power_on_sram(scp->reg_base + MT8192_L1TCM_SRAM_PDN);
-	mt8192_power_on_sram(scp->reg_base + MT8192_CPU0_SRAM_PD);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
+
+	/* enable MPU for all memory regions */
+	writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
+
+	return 0;
+}
+
+static int mt8195_scp_before_load(struct mtk_scp *scp)
+{
+	/* clear SPM interrupt, SCP2SPM_IPC_CLR */

drivers/remoteproc/mtk_scp.c static int mt8192_scp_before_load(struct mtk_scp *scp) · line 418

Quoted 10 lines
drivers/remoteproc/mtk_scp.c +10 -0
+	writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR);
+
+	writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
+
+	/* enable SRAM clock */
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN,
+			  MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);

This is supposed to be MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS.

Quoted 21 lines
drivers/remoteproc/mtk_scp.c +9 -5
+	scp_sram_power_on(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
 
  	/* enable MPU for all memory regions */
  	writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
@@ -551,11 +572,25 @@ static void mt8183_scp_stop(struct mtk_scp *scp)
  static void mt8192_scp_stop(struct mtk_scp *scp)
  {
  	/* Disable SRAM clock */
-	mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0);
-	mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1);
-	mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2);
-	mt8192_power_off_sram(scp->reg_base + MT8192_L1TCM_SRAM_PDN);
-	mt8192_power_off_sram(scp->reg_base + MT8192_CPU0_SRAM_PD);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L1TCM_SRAM_PDN, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
+
+	/* Disable SCP watchdog */
+	writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);

drivers/remoteproc/mtk_scp.c static void mt8183_scp_stop(struct mtk_scp *scp) · line 592

Quoted 10 lines
drivers/remoteproc/mtk_scp.c +10 -0
+}
+
+static void mt8195_scp_stop(struct mtk_scp *scp)
+{
+	/* Disable SRAM clock */
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L1TCM_SRAM_PDN,
+			   MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);

same here.

Quoted 18 lines
drivers/remoteproc/mtk_scp.c +3 -2
+	scp_sram_power_off(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
 
  	/* Disable SCP watchdog */
  	writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);
@@ -888,11 +923,11 @@ static const struct mtk_scp_of_data mt8192_of_data = {
 
  static const struct mtk_scp_of_data mt8195_of_data = {
  	.scp_clk_get = mt8195_scp_clk_get,
-	.scp_before_load = mt8192_scp_before_load,
+	.scp_before_load = mt8195_scp_before_load,
  	.scp_irq_handler = mt8192_scp_irq_handler,
  	.scp_reset_assert = mt8192_scp_reset_assert,
  	.scp_reset_deassert = mt8192_scp_reset_deassert,
-	.scp_stop = mt8192_scp_stop,
+	.scp_stop = mt8195_scp_stop,
  	.scp_da_to_va = mt8192_scp_da_to_va,
  	.host_to_scp_reg = MT8192_GIPC_IN_SET,
  	.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
#2 lore raw

Hi Angelo,

They will be fixed at next version.
Thank you.

Best regards,
TingHan

Quoted 163 lines · AngeloGioacchino Del Regno

Il 11/03/22 13:30, Tinghan Shen ha scritto:

Quoted 95 lines

The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192.

L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM.

L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP. These bits have to be powered on to allow EMI access for SCP.

Bits[7:4] also affect audio DSP because audio DSP and SCP are placed on the same hardware bus. If SCP cannot access EMI, audio DSP is blocked too.

L1TCM_SRAM_PDN bits[31:8] are not used.

This fix removes modification of bits[7:4] when power on/off mt8195 SCP L1TCM. It's because the modification introduces a short period of time blocking audio DSP to access EMI. This was not a problem until we have to load both SCP module and audio DSP module. audio DSP needs to access EMI because it has source/data on DRAM. Audio DSP will have unexpected behavior when it accesses EMI and the SCP driver blocks the EMI path at the same time.

---
  drivers/remoteproc/mtk_common.h |  2 +
  drivers/remoteproc/mtk_scp.c    | 67 +++++++++++++++++++++++++--------
  2 files changed, 53 insertions(+), 16 deletions(-)
drivers/remoteproc/mtk_common.h +2 -0
index 5ff3867c72f3..ff954a06637c 100644
@@ -51,6 +51,8 @@
  #define MT8192_CORE0_WDT_IRQ		0x10030
  #define MT8192_CORE0_WDT_CFG		0x10034
 
+#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS		GENMASK(7, 4)
+
  #define SCP_FW_VER_LEN			32
  #define SCP_SHARE_BUFFER_SIZE		288
 
drivers/remoteproc/mtk_scp.c +19 -9
index dcddb33e9997..086cf8263f6c 100644
@@ -365,22 +365,22 @@ static int mt8183_scp_before_load(struct mtk_scp *scp)
  	return 0;
  }
 
-static void mt8192_power_on_sram(void __iomem *addr)
+static void scp_sram_power_on(void __iomem *addr, u32 reserved_mask)
  {
  	int i;
 
  	for (i = 31; i >= 0; i--)
-		writel(GENMASK(i, 0), addr);
+		writel(GENMASK(i, 0) & ~reserved_mask, addr);
  	writel(0, addr);
  }
 
-static void mt8192_power_off_sram(void __iomem *addr)
+static void scp_sram_power_off(void __iomem *addr, u32 reserved_mask)
  {
  	int i;
 
  	writel(0, addr);
  	for (i = 0; i < 32; i++)
-		writel(GENMASK(i, 0), addr);
+		writel(GENMASK(i, 0) & ~reserved_mask, addr);
  }
 
  static int mt8192_scp_before_load(struct mtk_scp *scp)
@@ -391,11 +391,32 @@ static int mt8192_scp_before_load(struct mtk_scp *scp)
  	writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
 
  	/* enable SRAM clock */
-	mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0);
-	mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1);
-	mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2);
-	mt8192_power_on_sram(scp->reg_base + MT8192_L1TCM_SRAM_PDN);
-	mt8192_power_on_sram(scp->reg_base + MT8192_CPU0_SRAM_PD);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
+
+	/* enable MPU for all memory regions */
+	writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
+
+	return 0;
+}
+
+static int mt8195_scp_before_load(struct mtk_scp *scp)
+{
+	/* clear SPM interrupt, SCP2SPM_IPC_CLR */

drivers/remoteproc/mtk_scp.c static int mt8192_scp_before_load(struct mtk_scp *scp) · line 418

Quoted 10 lines
drivers/remoteproc/mtk_scp.c +10 -0
+	writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR);
+
+	writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
+
+	/* enable SRAM clock */
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN,
+			  MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);

This is supposed to be MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS.

Quoted 21 lines
drivers/remoteproc/mtk_scp.c +9 -5
+	scp_sram_power_on(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
 
  	/* enable MPU for all memory regions */
  	writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
@@ -551,11 +572,25 @@ static void mt8183_scp_stop(struct mtk_scp *scp)
  static void mt8192_scp_stop(struct mtk_scp *scp)
  {
  	/* Disable SRAM clock */
-	mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0);
-	mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1);
-	mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2);
-	mt8192_power_off_sram(scp->reg_base + MT8192_L1TCM_SRAM_PDN);
-	mt8192_power_off_sram(scp->reg_base + MT8192_CPU0_SRAM_PD);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L1TCM_SRAM_PDN, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
+
+	/* Disable SCP watchdog */
+	writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);

drivers/remoteproc/mtk_scp.c static void mt8183_scp_stop(struct mtk_scp *scp) · line 592

Quoted 10 lines
drivers/remoteproc/mtk_scp.c +10 -0
+}
+
+static void mt8195_scp_stop(struct mtk_scp *scp)
+{
+	/* Disable SRAM clock */
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+	scp_sram_power_off(scp->reg_base + MT8192_L1TCM_SRAM_PDN,
+			   MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);

same here.

Quoted 18 lines
drivers/remoteproc/mtk_scp.c +3 -2
+	scp_sram_power_off(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
 
  	/* Disable SCP watchdog */
  	writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);
@@ -888,11 +923,11 @@ static const struct mtk_scp_of_data mt8192_of_data = {
 
  static const struct mtk_scp_of_data mt8195_of_data = {
  	.scp_clk_get = mt8195_scp_clk_get,
-	.scp_before_load = mt8192_scp_before_load,
+	.scp_before_load = mt8195_scp_before_load,
  	.scp_irq_handler = mt8192_scp_irq_handler,
  	.scp_reset_assert = mt8192_scp_reset_assert,
  	.scp_reset_deassert = mt8192_scp_reset_deassert,
-	.scp_stop = mt8192_scp_stop,
+	.scp_stop = mt8195_scp_stop,
  	.scp_da_to_va = mt8192_scp_da_to_va,
  	.host_to_scp_reg = MT8192_GIPC_IN_SET,
  	.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
#3 lore raw
In reply to Tinghan Shen
Thank you for the patch! Yet something to improve:

Hi Tinghan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on remoteproc/rproc-next]
[also build test ERROR on v5.17-rc7 next-20220310]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Tinghan-Shen/remoteproc-mediatek-fix-side-effect-of-mt8195-sram-power-on/20220311-203255
base:   git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git rproc-next
config: parisc-randconfig-r031-20220310 (https://download.01.org/0day-ci/archive/20220312/[email protected]/config)
compiler: hppa-linux-gcc (GCC) 11.2.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6d56ab3bae4e0d5e07d295169602883ba7d7de08
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Tinghan-Shen/remoteproc-mediatek-fix-side-effect-of-mt8195-sram-power-on/20220311-203255 git checkout 6d56ab3bae4e0d5e07d295169602883ba7d7de08
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=parisc SHELL=/bin/bash drivers/remoteproc/

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

drivers/remoteproc/mtk_scp.c: In function 'mt8195_scp_before_load':

>> drivers/remoteproc/mtk_scp.c:418:27: error: 'MT8195_L1TCM_SRAM_PDN_RESERVED_BITS' undeclared (first use in this function); did you mean 'MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS'?
     418 |                           MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                           MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS
   drivers/remoteproc/mtk_scp.c:418:27: note: each undeclared identifier is reported only once for each function it appears in
   drivers/remoteproc/mtk_scp.c: In function 'mt8195_scp_stop':
   drivers/remoteproc/mtk_scp.c:592:28: error: 'MT8195_L1TCM_SRAM_PDN_RESERVED_BITS' undeclared (first use in this function); did you mean 'MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS'?
     592 |                            MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
         |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                            MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS

vim +418 drivers/remoteproc/mtk_scp.c

405
406 static int mt8195_scp_before_load(struct mtk_scp *scp)
407 {
408 /* clear SPM interrupt, SCP2SPM_IPC_CLR */
409 writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR);
410
411 writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
412
413 /* enable SRAM clock */
414 scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
415 scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
416 scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
417 scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN,

 > 418				  MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);

419 scp_sram_power_on(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
420
421 /* enable MPU for all memory regions */
422 writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
423
424 return 0;
425 }
426

---
0-DAY CI Kernel Test Service
https://lists.01.org/hyperkitty/list/[email protected]

#4 lore raw

Hi Tinghan,

Quoted 9 lines
     418 |                           MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                           MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS
   drivers/remoteproc/mtk_scp.c:418:27: note: each undeclared identifier is reported only once for each function it appears in
   drivers/remoteproc/mtk_scp.c: In function 'mt8195_scp_stop':
   drivers/remoteproc/mtk_scp.c:592:28: error: 'MT8195_L1TCM_SRAM_PDN_RESERVED_BITS' undeclared (first use in this function); did you mean 'MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS'?
     592 |                            MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
         |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                            MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS

I tested this patch and it can should be caught by the internal build test.

Could you do the test before submitting patches out?

Thanks,
Miles

#5 lore raw

Hi Miles,

Quoted 14 lines · Miles Chen

Hi Tinghan,

Quoted 11 lines
     418 |                           MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                           MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS
   drivers/remoteproc/mtk_scp.c:418:27: note: each undeclared identifier is reported only once
for each function it appears in
   drivers/remoteproc/mtk_scp.c: In function 'mt8195_scp_stop':
   drivers/remoteproc/mtk_scp.c:592:28: error: 'MT8195_L1TCM_SRAM_PDN_RESERVED_BITS' undeclared
(first use in this function); did you mean 'MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS'?
     592 |                            MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
         |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                            MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS
Quoted 8 lines

I tested this patch and it can should be caught by the internal build test.

Could you do the test before submitting patches out?

Thanks,
Miles

I'm Sorry. I was too confident for this change.
I'll do the test at next time.
Thank you.

Best regards,
TingHan

#6 lore raw
In reply to Tinghan Shen
Thank you for the patch! Yet something to improve:

Hi Tinghan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on remoteproc/rproc-next]
[also build test ERROR on v5.17-rc7 next-20220310]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Tinghan-Shen/remoteproc-mediatek-fix-side-effect-of-mt8195-sram-power-on/20220311-203255
base:   git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git rproc-next
config: s390-buildonly-randconfig-r004-20220310 (https://download.01.org/0day-ci/archive/20220312/[email protected]/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 276ca87382b8f16a65bddac700202924228982f6)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install s390 cross compiling tool for clang build
# apt-get install binutils-s390x-linux-gnu
# https://github.com/0day-ci/linux/commit/6d56ab3bae4e0d5e07d295169602883ba7d7de08
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Tinghan-Shen/remoteproc-mediatek-fix-side-effect-of-mt8195-sram-power-on/20220311-203255 git checkout 6d56ab3bae4e0d5e07d295169602883ba7d7de08
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=s390 SHELL=/bin/bash drivers/remoteproc/

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

In file included from drivers/remoteproc/mtk_scp.c:7:
In file included from include/linux/dma-mapping.h:10:
In file included from include/linux/scatterlist.h:9:
In file included from arch/s390/include/asm/io.h:75:
include/asm-generic/io.h:464:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]

           val = __raw_readb(PCI_IOBASE + addr);
                             ~~~~~~~~~~ ^
   include/asm-generic/io.h:477:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:37:59: note: expanded from macro '__le16_to_cpu'
   #define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
                                                             ^
   include/uapi/linux/swab.h:102:54: note: expanded from macro '__swab16'
   #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
                                                        ^
   In file included from drivers/remoteproc/mtk_scp.c:7:
   In file included from include/linux/dma-mapping.h:10:
   In file included from include/linux/scatterlist.h:9:
   In file included from arch/s390/include/asm/io.h:75:
   include/asm-generic/io.h:490:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:35:59: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:115:54: note: expanded from macro '__swab32'
   #define __swab32(x) (__u32)__builtin_bswap32((__u32)(x))
                                                        ^
   In file included from drivers/remoteproc/mtk_scp.c:7:
   In file included from include/linux/dma-mapping.h:10:
   In file included from include/linux/scatterlist.h:9:
   In file included from arch/s390/include/asm/io.h:75:
   include/asm-generic/io.h:501:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writeb(value, PCI_IOBASE + addr);
                               ~~~~~~~~~~ ^
   include/asm-generic/io.h:511:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:521:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:609:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsb(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:617:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsw(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:625:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsl(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:634:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesb(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
   include/asm-generic/io.h:643:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesw(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
   include/asm-generic/io.h:652:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesl(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
>> drivers/remoteproc/mtk_scp.c:418:6: error: use of undeclared identifier 'MT8195_L1TCM_SRAM_PDN_RESERVED_BITS'
                             MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
                             ^
   drivers/remoteproc/mtk_scp.c:592:7: error: use of undeclared identifier 'MT8195_L1TCM_SRAM_PDN_RESERVED_BITS'
                              MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
                              ^

12 warnings and 2 errors generated.

vim +/MT8195_L1TCM_SRAM_PDN_RESERVED_BITS +418 drivers/remoteproc/mtk_scp.c

405
406 static int mt8195_scp_before_load(struct mtk_scp *scp)
407 {
408 /* clear SPM interrupt, SCP2SPM_IPC_CLR */
409 writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR);
410
411 writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
412
413 /* enable SRAM clock */
414 scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
415 scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
416 scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
417 scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN,

 > 418				  MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);

419 scp_sram_power_on(scp->reg_base + MT8192_CPU0_SRAM_PD, 0);
420
421 /* enable MPU for all memory regions */
422 writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
423
424 return 0;
425 }
426

---
0-DAY CI Kernel Test Service
https://lists.01.org/hyperkitty/list/[email protected]