KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
PATCH 1/1 KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
When testing a kernel with commit a5905d6af492 ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") get-reg-list output
vregs: Number blessed registers: 234
vregs: Number registers: 238
vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:
KVM_REG_ARM_FW_REG(3),
vregs: PASS
...
That output inspired two changes: 1) add the new register to the blessed list and 2) explain why "Number registers" is actually four larger than "Number blessed registers" (on the system used for testing), even though only one register is being stated as new. The reason is that some registers are host dependent and they get filtered out when comparing with the blessed list. The system used for the test apparently had three filtered registers.
--- tools/testing/selftests/kvm/aarch64/get-reg-list.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
tools/testing/selftests/kvm/aarch64/get-reg-list.c +10 -4
@@ -503,8 +503,13 @@ static void run_test(struct vcpu_config *c) ++missing_regs;if (new_regs || missing_regs) { + n =0 ; +for_each_reg_filtered (i) + ++n; +printf ("%s: Number blessed registers: %5lld\n" ,config_name (c), blessed_n); -printf ("%s: Number registers: %5lld\n" ,config_name (c), reg_list->n); +printf ("%s: Number registers: %5lld (includes %lld filtered registers)\n" , +config_name (c), reg_list->n, reg_list->n - n); }if (new_regs) {
@@ -683,9 +688,10 @@ static __u64 base_regs[] = {KVM_REG_ARM64 |KVM_REG_SIZE_U64 |KVM_REG_ARM_CORE |KVM_REG_ARM_CORE_REG (spsr[4 ]),KVM_REG_ARM64 |KVM_REG_SIZE_U32 |KVM_REG_ARM_CORE |KVM_REG_ARM_CORE_REG (fp_regs.fpsr),KVM_REG_ARM64 |KVM_REG_SIZE_U32 |KVM_REG_ARM_CORE |KVM_REG_ARM_CORE_REG (fp_regs.fpcr), -KVM_REG_ARM_FW_REG (0 ), -KVM_REG_ARM_FW_REG (1 ), -KVM_REG_ARM_FW_REG (2 ), +KVM_REG_ARM_FW_REG (0 ),/* KVM_REG_ARM_PSCI_VERSION */ +KVM_REG_ARM_FW_REG (1 ),/* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 */ +KVM_REG_ARM_FW_REG (2 ),/* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 */ +KVM_REG_ARM_FW_REG (3 ),/* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 */ ARM64_SYS_REG (3 ,3 ,14 ,3 ,1 ),/* CNTV_CTL_EL0 */ ARM64_SYS_REG (3 ,3 ,14 ,3 ,2 ),/* CNTV_CVAL_EL0 */ ARM64_SYS_REG(3, 3, 14, 0, 2),
Signature · 6 lines
2.34.1 _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
+Paolo
Quoted 52 lines · Andrew Jones
When testing a kernel with commit
a5905d6af492("KVM: arm64:
AllowSMCCC_ARCH_WORKAROUND_3to be discovered and migrated") get-reg-list outputvregs: Number blessed registers: 234
vregs: Number registers: 238vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:KVM_REG_ARM_FW_REG(3),vregs: PASS
...That output inspired two changes: 1) add the new register to the blessed list and 2) explain why "Number registers" is actually four larger than "Number blessed registers" (on the system used for testing), even though only one register is being stated as new. The reason is that some registers are host dependent and they get filtered out when comparing with the blessed list. The system used for the test apparently had three filtered registers.
Signed-off-by Andrew Jones <[email protected]>--- tools/testing/selftests/kvm/aarch64/get-reg-list.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)tools/testing/selftests/kvm/aarch64/get-reg-list.c +6
-1@@ -503,8 +503,13 @@ static void run_test(struct vcpu_config *c) ++missing_regs;if (new_regs || missing_regs) { + n =0 ; +for_each_reg_filtered (i) + ++n; +printf ("%s: Number blessed registers: %5lld\n" ,config_name (c), blessed_n); -printf ("%s: Number registers: %5lld\n" ,config_name (c), reg_list->n); +printf ("%s: Number registers: %5lld (includes %lld filtered registers)\n" , +config_name (c), reg_list->n, reg_list->n - n); }if (new_regs) {@@ -683,9 +688,10 @@ static __u64 base_regs[] = {KVM_REG_ARM64 |KVM_REG_SIZE_U64 |KVM_REG_ARM_CORE |KVM_REG_ARM_CORE_REG (spsr[4 ]),KVM_REG_ARM64 |KVM_REG_SIZE_U32 |KVM_REG_ARM_CORE |KVM_REG_ARM_CORE_REG (fp_regs.fpsr), KVM_REG_ARM64 | KVM_REG_SIZE_U32 | KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(fp_regs.fpcr),
tools/testing/selftests/kvm/aarch64/get-reg-list.c static __u64 base_regs[] = { · line 697
Quoted 10 lines
tools/testing/selftests/kvm/aarch64/get-reg-list.c +4
-3-KVM_REG_ARM_FW_REG (0 ), -KVM_REG_ARM_FW_REG (1 ), -KVM_REG_ARM_FW_REG (2 ), +KVM_REG_ARM_FW_REG (0 ),/* KVM_REG_ARM_PSCI_VERSION */ +KVM_REG_ARM_FW_REG (1 ),/* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 */ +KVM_REG_ARM_FW_REG (2 ),/* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 */ +KVM_REG_ARM_FW_REG (3 ),/* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 */ ARM64_SYS_REG (3 ,3 ,14 ,3 ,1 ),/* CNTV_CTL_EL0 */ ARM64_SYS_REG (3 ,3 ,14 ,3 ,2 ),/* CNTV_CVAL_EL0 */ ARM64_SYS_REG(3, 3, 14, 0, 2),
Paolo, I don't have anything pending for 5.17, so feel free to take it directly into Linus' tree.
Thanks,
M.
Signature · 5 lines
Without deviation from the norm, progress is not possible. _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
Quoted 8 lines · Andrew Jones
When testing a kernel with commit
a5905d6af492("KVM: arm64:
AllowSMCCC_ARCH_WORKAROUND_3to be discovered and migrated") get-reg-list outputvregs: Number blessed registers: 234
vregs: Number registers: 238[...]
Applied to fixes, thanks!
[1/1] KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
commit: 02de9331c4d0c6bddac9c5fa66d91f70adf8612b
Cheers,
M.
Signature · 7 lines
Without deviation from the norm, progress is not possible. _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm