Skip to contentSkip to conversation

virtio_console: break out of buf poll on remove

PATCH New Sasha Levin 1 participant 3 messages Mar 16, 2022

Subsystems (5)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/3 virtio_console: break out of buf poll on remove

From: "Michael S. Tsirkin" <[email protected]>

[ Upstream commit 0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]

A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..

reset prevents new interrupts from arriving and waits for interrupt handlers to finish.

However if - as is common - the handler queues a work request which is flushed during the cleanup stage, we have code adding buffers / trying to get buffers while device is reset. Not good.

This was reproduced by running
modprobe virtio_console
modprobe -r virtio_console
in a loop.

Fix this up by calling virtio_break_device + flush before reset.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239

---
 drivers/char/virtio_console.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/char/virtio_console.c +7 -0
index 0fb3a8e62e62..2140d401523f 100644
@@ -2001,6 +2001,13 @@ static void virtcons_remove(struct virtio_device *vdev)
 	list_del(&portdev->list);
 	spin_unlock_irq(&pdrvdata_lock);
 
+	/* Device is going away, exit any polling for buffers */
+	virtio_break_device(vdev);
+	if (use_multiport(portdev))
+		flush_work(&portdev->control_work);
+	else
+		flush_work(&portdev->config_work);
+
 	/* Disable interrupts for vqs */
 	vdev->config->reset(vdev);
 	/* Finish up work that's lined up */
Signature · 6 lines
2.34.1

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
author maintainer
#1 lore raw

PATCH 2/3 ethernet: sun: Free the coherent when failing in probing

From: Zheyu Ma <[email protected]>

[ Upstream commit bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]

When the driver fails to register net device, it should free the DMA region first, and then do other cleanup.

---
 drivers/net/ethernet/sun/sunhme.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/sun/sunhme.c +5 -1
index 9e983e1d8249..7522f277e912 100644
@@ -3165,7 +3165,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
 	if (err) {
 		printk(KERN_ERR "happymeal(PCI): Cannot register net device, "
 		       "aborting.\n");
-		goto err_out_iounmap;
+		goto err_out_free_coherent;
 	}
 
 	pci_set_drvdata(pdev, hp);
@@ -3198,6 +3198,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
 
 	return 0;
 
+err_out_free_coherent:
+	dma_free_coherent(hp->dma_dev, PAGE_SIZE,
+			  hp->happy_block, hp->hblock_dvma);
+
 err_out_iounmap:
 	iounmap(hp->gregs);
 
Signature · 1 line
2.34.1
author maintainer
#2 lore raw

PATCH 3/3 spi: Fix invalid sgs value

In reply to Sasha Levin

From: Biju Das <[email protected]>

[ Upstream commit 1a4e53d2fc4f68aa654ad96d13ad042e1a8e8a7d ]

max_seg_size is unsigned int and it can have a value up to 2^32 (for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX) When this value is used in min_t() as an integer type, it becomes -1 and the value of sgs becomes 0.

Fix this issue by replacing the 'int' data type with 'unsigned int' in min_t().

---
 drivers/spi/spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/spi/spi.c +2 -2
index 71f74015efb9..d26aefed16ac 100644
@@ -774,10 +774,10 @@ static int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
 	int i, ret;
 
 	if (vmalloced_buf || kmap_buf) {
-		desc_len = min_t(int, max_seg_size, PAGE_SIZE);
+		desc_len = min_t(unsigned int, max_seg_size, PAGE_SIZE);
 		sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
 	} else if (virt_addr_valid(buf)) {
-		desc_len = min_t(int, max_seg_size, ctlr->max_dma_len);
+		desc_len = min_t(unsigned int, max_seg_size, ctlr->max_dma_len);
 		sgs = DIV_ROUND_UP(len, desc_len);
 	} else {
 		return -EINVAL;
Signature · 1 line
2.34.1