mtd: spinand: add support for more GD SPI NANDs
Subsystems (2)
cover mtd: spinand: add support for more GD SPI NANDs
This patchset adds support for gigadevice SPI NANDs currently in production.
Tested the following chip by reading and writing a large file on UBIFS:
GD5F1GQ5UEYIG
GD5F2GQ5UEYIG
GD5F4GQ6UEYIG
GD5F2GM7UEYIG
GD5F4GM8UEYIG
Other untested ones are variants of tested or currently supported chips with different voltage and capacity.
Chuanhong Guo (5):
mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
mtd: spinand: gigadevice: add support for GD5F{2,4}GQ5xExxG
mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
drivers/mtd/nand/spi/gigadevice.c | 158 +++++++++++++++++++++++++++++- 1 file changed, 157 insertions(+), 1 deletion(-)
Signature · 1 line
2.35.1
PATCH 1/5 mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according to page 23 of the datasheet[0].
[0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/
--- drivers/mtd/nand/spi/gigadevice.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/mtd/nand/spi/gigadevice.c +9 -1
@@ -39,6 +39,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants_f,SPINAND_PAGE_READ_FROM_CACHE_OP_3A (true,0 ,1 ,NULL ,0 ), SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0)); +static SPINAND_OP_VARIANTS(read_cache_variants_1gq5, + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), +SPINAND_PAGE_READ_FROM_CACHE_X4_OP (0 ,1 ,NULL ,0 ), +SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP (0 ,1 ,NULL ,0 ), +SPINAND_PAGE_READ_FROM_CACHE_X2_OP (0 ,1 ,NULL ,0 ), +SPINAND_PAGE_READ_FROM_CACHE_OP (true,0 ,1 ,NULL ,0 ), + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); + static SPINAND_OP_VARIANTS(write_cache_variants, SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -339,7 +347,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x51 ),NAND_MEMORG (1 ,2048 ,128 ,64 ,1024 ,20 ,1 ,1 ,1 ),NAND_ECCREQ (4 ,512 ), -SPINAND_INFO_OP_VARIANTS (&read_cache_variants, +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, &write_cache_variants, &update_cache_variants), SPINAND_HAS_QE_BIT,
Signature · 1 line
2.35.1
Re: [PATCH 1/5] mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
Quoted 7 lines · Chuanhong Guo
Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according to page 23 of the datasheet[0].
[0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/
Fixes 469b99248985 ("mtd: spinand: gigadevice: Support GD5F1GQ5UExxG")Signed-off-by Chuanhong Guo <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
PATCH 2/5 mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
In reply to Chuanhong GuoAdd support for:
GD5F1GQ4RExxG
GD5F2GQ4{U,R}ExxG
These chips differ from GD5F1GQ4UExxG only in chip ID, voltage and capacity.
--- drivers/mtd/nand/spi/gigadevice.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
drivers/mtd/nand/spi/gigadevice.c +30 -0
@@ -333,6 +333,36 @@ static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout, gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F1GQ4RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_ADDR ,0xc1 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,1024 ,20 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F2GQ4UExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_ADDR ,0xd2 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F2GQ4RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_ADDR ,0xc2 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), SPINAND_INFO("GD5F1GQ4UFxxG", SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48), NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
Signature · 1 line
2.35.1
Re: [PATCH 2/5] mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
Quoted 8 lines · Chuanhong Guo
Add support for:
GD5F1GQ4RExxG
GD5F2GQ4{U,R}ExxGThese chips differ from GD5F1GQ4UExxG only in chip ID, voltage and capacity.
Signed-off-by Chuanhong Guo <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
PATCH 3/5 mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
In reply to Chuanhong GuoThis chip is the 1.8v version of GD5F1GQ5UExxG.
--- drivers/mtd/nand/spi/gigadevice.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/mtd/nand/spi/gigadevice.c +10 -0
@@ -383,6 +383,16 @@ static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout, gd5fxgq5xexxg_ecc_get_status)), +SPINAND_INFO ("GD5F1GQ5RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x41 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,1024 ,20 ,1 ,1 ,1 ), +NAND_ECCREQ (4 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq5xexxg_ecc_get_status)), }; static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
Signature · 1 line
2.35.1
Re: [PATCH 3/5] mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
Quoted 3 lines · Chuanhong Guo
This chip is the 1.8v version of GD5F1GQ5UExxG.
Signed-off-by Chuanhong Guo <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
PATCH 4/5 mtd: spinand: gigadevice: add support for GD5F{2,4}GQ5xExxG
In reply to Chuanhong GuoAdd support for:
GD5F2GQ5{U,R}ExxG
GD5F4GQ6{U,R}ExxG
These chips uses 4 dummy bytes for quad io and 2 dummy bytes for dual io. Besides that and memory layout, they are identical to their 1G variant.
--- drivers/mtd/nand/spi/gigadevice.c | 48 +++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)
drivers/mtd/nand/spi/gigadevice.c +48 -0
@@ -47,6 +47,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants_1gq5,SPINAND_PAGE_READ_FROM_CACHE_OP (true,0 ,1 ,NULL ,0 ), SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); +static SPINAND_OP_VARIANTS(read_cache_variants_2gq5, + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 4, NULL, 0), +SPINAND_PAGE_READ_FROM_CACHE_X4_OP (0 ,1 ,NULL ,0 ), +SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP (0 ,2 ,NULL ,0 ), +SPINAND_PAGE_READ_FROM_CACHE_X2_OP (0 ,1 ,NULL ,0 ), +SPINAND_PAGE_READ_FROM_CACHE_OP (true,0 ,1 ,NULL ,0 ), + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); + static SPINAND_OP_VARIANTS(write_cache_variants, SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -393,6 +401,46 @@ static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout, gd5fxgq5xexxg_ecc_get_status)), +SPINAND_INFO ("GD5F2GQ5UExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x52 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,1 ,1 ), +NAND_ECCREQ (4 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_2gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq5xexxg_ecc_get_status)), +SPINAND_INFO ("GD5F2GQ5RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x42 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,1 ,1 ), +NAND_ECCREQ (4 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_2gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq5xexxg_ecc_get_status)), +SPINAND_INFO ("GD5F4GQ6UExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x55 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,2 ,1 ), +NAND_ECCREQ (4 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_2gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq5xexxg_ecc_get_status)), +SPINAND_INFO ("GD5F4GQ6RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x45 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,2 ,1 ), +NAND_ECCREQ (4 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_2gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq5xexxg_ecc_get_status)), }; static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
Signature · 1 line
2.35.1
Re: [PATCH 4/5] mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG
Quoted 8 lines · Chuanhong Guo
Add support for:
GD5F2GQ5{U,R}ExxG
GD5F4GQ6{U,R}ExxGThese chips uses 4 dummy bytes for quad io and 2 dummy bytes for dual io. Besides that and memory layout, they are identical to their 1G variant.
Signed-off-by Chuanhong Guo <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
PATCH 5/5 mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
In reply to Chuanhong GuoAdd support for:
GD5F{1,2}GM7{U,R}ExxG
GD5F4GM8{U,R}ExxG
These are new 27nm counterparts for the GD5FxGQ4 chips from GigaDevice with 8b/512b on-die ECC capability.
These chips (and currently supported GD5FxGQ5 chips) have QIO DTR instruction for reading page cache. It isn't added in this patch because I don't have a DTR spi controller for testing.
--- drivers/mtd/nand/spi/gigadevice.c | 60 +++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
drivers/mtd/nand/spi/gigadevice.c +60 -0
@@ -441,6 +441,66 @@ static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout, gd5fxgq5xexxg_ecc_get_status)), +SPINAND_INFO ("GD5F1GM7UExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x91 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,1024 ,20 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F1GM7RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x81 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,1024 ,20 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F2GM7UExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x92 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F2GM7RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x82 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,2048 ,40 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F4GM8UExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x95 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,4096 ,80 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), +SPINAND_INFO ("GD5F4GM8RExxG" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0x85 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,4096 ,80 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants_1gq5, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&gd5fxgqx_variant2_ooblayout, + gd5fxgq4uexxg_ecc_get_status)), }; static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
Signature · 1 line
2.35.1
Re: [PATCH 5/5] mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
Quoted 11 lines · Chuanhong Guo
Add support for:
GD5F{1,2}GM7{U,R}ExxG
GD5F4GM8{U,R}ExxGThese are new 27nm counterparts for the GD5FxGQ4 chips from GigaDevice with 8b/512b on-die ECC capability.
These chips (and currently supported GD5FxGQ5 chips) have QIO DTR instruction for reading page cache. It isn't added in this patch because I don't have a DTR spi controller for testing.Signed-off-by Chuanhong Guo <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel