Skip to contentSkip to conversation

flower: match on the number of vlan tags

PATCH In review Boris Sukholitko 2 participants 7 messages Mar 23, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover flower: match on the number of vlan tags

Hi,

Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet.

For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags.

This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet.

The following patch series implement number of vlans flower filter. They add num_of_vlans flower filter as an alternative to vlan ethtype protocol matching. The end result is that the following command becomes possible:

tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop

More about the patch series:
- patches 1-2 remove duplicate code by introducing is_key_vlan helper.
- patch 3, 4 implement num_of_vlans in the dissector and in the flower.
- patch 5 uses the num_of_vlans filter to allow further matching on vlan attributes.

Complementary iproute2 patches are being sent separately.

Thanks,
Boris.

Boris Sukholitko (5):
Helper function for vlan ethtype checks Reduce identation after is_key_vlan refactoring Add number of vlan tags dissector
Add number of vlan tags filter to the flower Consider the number of vlan tags for vlan filters

 include/net/flow_dissector.h |  9 ++++
 include/uapi/linux/pkt_cls.h |  2 +
 net/core/flow_dissector.c    | 20 +++++++++
 net/sched/cls_flower.c       | 86 +++++++++++++++++++++++-------------
 4 files changed, 86 insertions(+), 31 deletions(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH 1/5 Helper function for vlan ethtype checks

There are somewhat repetitive ethertype checks in fl_set_key. Refactor them into is_vlan_key helper function.

To make the changes clearer, avoid touching identation levels. This is the job for the next patch in the series.

---
 net/sched/cls_flower.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
net/sched/cls_flower.c +17 -15
index 1a9b1f140f9e..6c355b293f02 100644
@@ -1492,6 +1492,21 @@ static int fl_set_key_ct(struct nlattr **tb,
 	return 0;
 }
 
+static bool is_vlan_key(struct nlattr *tb, __be16 *ethertype,
+			struct fl_flow_key *key, struct fl_flow_key *mask)
+{
+	if (!tb)
+		return false;
+
+	*ethertype = nla_get_be16(tb);
+	if (eth_type_vlan(*ethertype))
+		return true;
+
+	key->basic.n_proto = *ethertype;
+	mask->basic.n_proto = cpu_to_be16(~0);
+	return false;
+}
+
 static int fl_set_key(struct net *net, struct nlattr **tb,
 		      struct fl_flow_key *key, struct fl_flow_key *mask,
 		      struct netlink_ext_ack *extack)
@@ -1514,17 +1529,12 @@ static int fl_set_key(struct net *net, struct nlattr **tb,
 		       mask->eth.src, TCA_FLOWER_KEY_ETH_SRC_MASK,
 		       sizeof(key->eth.src));
 
-	if (tb[TCA_FLOWER_KEY_ETH_TYPE]) {
-		ethertype = nla_get_be16(tb[TCA_FLOWER_KEY_ETH_TYPE]);
-
-		if (eth_type_vlan(ethertype)) {
+	if (is_vlan_key(tb[TCA_FLOWER_KEY_ETH_TYPE], &ethertype, key, mask)) {
 			fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_VLAN_ID,
 					TCA_FLOWER_KEY_VLAN_PRIO, &key->vlan,
 					&mask->vlan);
 
-			if (tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE]) {
-				ethertype = nla_get_be16(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE]);
-				if (eth_type_vlan(ethertype)) {
+			if (is_vlan_key(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE], &ethertype, key, mask)) {
 					fl_set_key_vlan(tb, ethertype,
 							TCA_FLOWER_KEY_CVLAN_ID,
 							TCA_FLOWER_KEY_CVLAN_PRIO,
@@ -1534,15 +1544,7 @@ static int fl_set_key(struct net *net, struct nlattr **tb,
 						       &mask->basic.n_proto,
 						       TCA_FLOWER_UNSPEC,
 						       sizeof(key->basic.n_proto));
-				} else {
-					key->basic.n_proto = ethertype;
-					mask->basic.n_proto = cpu_to_be16(~0);
-				}
 			}
-		} else {
-			key->basic.n_proto = ethertype;
-			mask->basic.n_proto = cpu_to_be16(~0);
-		}
 	}
 
 	if (key->basic.n_proto == htons(ETH_P_IP) ||
Signature · 1 line
2.29.2
#2 lore raw

PATCH 2/5 Reduce identation after is_key_vlan refactoring

In reply to Boris Sukholitko

Whitespace only.

---
 net/sched/cls_flower.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)
net/sched/cls_flower.c +15 -15
index 6c355b293f02..e073787dfd1d 100644
@@ -1530,21 +1530,21 @@ static int fl_set_key(struct net *net, struct nlattr **tb,
 		       sizeof(key->eth.src));
 
 	if (is_vlan_key(tb[TCA_FLOWER_KEY_ETH_TYPE], &ethertype, key, mask)) {
-			fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_VLAN_ID,
-					TCA_FLOWER_KEY_VLAN_PRIO, &key->vlan,
-					&mask->vlan);
-
-			if (is_vlan_key(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE], &ethertype, key, mask)) {
-					fl_set_key_vlan(tb, ethertype,
-							TCA_FLOWER_KEY_CVLAN_ID,
-							TCA_FLOWER_KEY_CVLAN_PRIO,
-							&key->cvlan, &mask->cvlan);
-					fl_set_key_val(tb, &key->basic.n_proto,
-						       TCA_FLOWER_KEY_CVLAN_ETH_TYPE,
-						       &mask->basic.n_proto,
-						       TCA_FLOWER_UNSPEC,
-						       sizeof(key->basic.n_proto));
-			}
+		fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_VLAN_ID,
+				TCA_FLOWER_KEY_VLAN_PRIO, &key->vlan,
+				&mask->vlan);
+
+		if (is_vlan_key(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE], &ethertype, key, mask)) {
+			fl_set_key_vlan(tb, ethertype,
+					TCA_FLOWER_KEY_CVLAN_ID,
+					TCA_FLOWER_KEY_CVLAN_PRIO,
+					&key->cvlan, &mask->cvlan);
+			fl_set_key_val(tb, &key->basic.n_proto,
+				       TCA_FLOWER_KEY_CVLAN_ETH_TYPE,
+				       &mask->basic.n_proto,
+				       TCA_FLOWER_UNSPEC,
+				       sizeof(key->basic.n_proto));
+		}
 	}
 
 	if (key->basic.n_proto == htons(ETH_P_IP) ||
Signature · 1 line
2.29.2
#3 lore raw

PATCH 3/5 Add number of vlan tags dissector

In reply to Boris Sukholitko

Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet.

For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags.

This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet.

This new dissector allows extracting the number of vlan tags existing in the packet.

---
 include/net/flow_dissector.h |  9 +++++++++
 net/core/flow_dissector.c    | 20 ++++++++++++++++++++
 2 files changed, 29 insertions(+)
include/net/flow_dissector.h +9 -0
index aa33e1092e2c..10b83e03af01 100644
@@ -251,6 +251,14 @@ struct flow_dissector_key_hash {
 	u32 hash;
 };
 
+/**
+ * struct flow_dissector_key_num_of_vlans:
+ * @num_of_vlans: num_of_vlans value
+ */
+struct flow_dissector_key_num_of_vlans {
+	u8 num_of_vlans;
+};
+
 enum flow_dissector_key_id {
 	FLOW_DISSECTOR_KEY_CONTROL, /* struct flow_dissector_key_control */
 	FLOW_DISSECTOR_KEY_BASIC, /* struct flow_dissector_key_basic */
@@ -280,6 +288,7 @@ enum flow_dissector_key_id {
 	FLOW_DISSECTOR_KEY_META, /* struct flow_dissector_key_meta */
 	FLOW_DISSECTOR_KEY_CT, /* struct flow_dissector_key_ct */
 	FLOW_DISSECTOR_KEY_HASH, /* struct flow_dissector_key_hash */
+	FLOW_DISSECTOR_KEY_NUM_OF_VLANS, /* struct flow_dissector_key_num_of_vlans */
 
 	FLOW_DISSECTOR_KEY_MAX,
 };
net/core/flow_dissector.c +20 -0
index 15833e1d6ea1..2027e8e72aad 100644
@@ -1034,6 +1034,16 @@ bool __skb_flow_dissect(const struct net *net,
 		memcpy(key_eth_addrs, &eth->h_dest, sizeof(*key_eth_addrs));
 	}
 
+	if (dissector_uses_key(flow_dissector,
+			       FLOW_DISSECTOR_KEY_NUM_OF_VLANS)) {
+		struct flow_dissector_key_num_of_vlans *key_num_of_vlans;
+
+		key_num_of_vlans = skb_flow_dissector_target(flow_dissector,
+							     FLOW_DISSECTOR_KEY_NUM_OF_VLANS,
+							     target_container);
+		key_num_of_vlans->num_of_vlans = 0;
+	}
+
 proto_again:
 	fdret = FLOW_DISSECT_RET_CONTINUE;
 
@@ -1157,6 +1167,16 @@ bool __skb_flow_dissect(const struct net *net,
 			nhoff += sizeof(*vlan);
 		}
 
+		if (dissector_uses_key(flow_dissector,
+				       FLOW_DISSECTOR_KEY_NUM_OF_VLANS)) {
+			struct flow_dissector_key_num_of_vlans *key_nvs;
+
+			key_nvs = skb_flow_dissector_target(flow_dissector,
+							    FLOW_DISSECTOR_KEY_NUM_OF_VLANS,
+							    target_container);
+			key_nvs->num_of_vlans++;
+		}
+
 		if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX) {
 			dissector_vlan = FLOW_DISSECTOR_KEY_VLAN;
 		} else if (dissector_vlan == FLOW_DISSECTOR_KEY_VLAN) {
Signature · 1 line
2.29.2
#4 lore raw

PATCH 4/5 Add number of vlan tags filter to the flower

In reply to Boris Sukholitko

These are bookkeeping parts of the new num_of_vlans filter. Defines, dump, load and set are being done here.

---
 include/uapi/linux/pkt_cls.h |  2 ++
 net/sched/cls_flower.c       | 14 ++++++++++++++
 2 files changed, 16 insertions(+)
include/uapi/linux/pkt_cls.h +2 -0
index ee38b35c3f57..5b14380adb2b 100644
@@ -587,6 +587,8 @@ enum {
 	TCA_FLOWER_KEY_HASH,		/* u32 */
 	TCA_FLOWER_KEY_HASH_MASK,	/* u32 */
 
+	TCA_FLOWER_KEY_NUM_OF_VLANS,    /* u8 */
+
 	__TCA_FLOWER_MAX,
 };
 
net/sched/cls_flower.c +14 -0
index e073787dfd1d..42dd84f5a037 100644
@@ -71,6 +71,7 @@ struct fl_flow_key {
 	} tp_range;
 	struct flow_dissector_key_ct ct;
 	struct flow_dissector_key_hash hash;
+	struct flow_dissector_key_num_of_vlans num_of_vlans;
 } __aligned(BITS_PER_LONG / 8); /* Ensure that we can do comparisons as longs. */
 
 struct fl_flow_mask_range {
@@ -713,6 +714,7 @@ static const struct nla_policy fl_policy[TCA_FLOWER_MAX + 1] = {
 	[TCA_FLOWER_FLAGS]		= { .type = NLA_U32 },
 	[TCA_FLOWER_KEY_HASH]		= { .type = NLA_U32 },
 	[TCA_FLOWER_KEY_HASH_MASK]	= { .type = NLA_U32 },
+	[TCA_FLOWER_KEY_NUM_OF_VLANS]	= { .type = NLA_U8 },
 
 };
 
@@ -1528,6 +1530,11 @@ static int fl_set_key(struct net *net, struct nlattr **tb,
 	fl_set_key_val(tb, key->eth.src, TCA_FLOWER_KEY_ETH_SRC,
 		       mask->eth.src, TCA_FLOWER_KEY_ETH_SRC_MASK,
 		       sizeof(key->eth.src));
+	fl_set_key_val(tb, &key->num_of_vlans,
+		       TCA_FLOWER_KEY_NUM_OF_VLANS,
+		       &mask->num_of_vlans,
+		       TCA_FLOWER_UNSPEC,
+		       sizeof(key->num_of_vlans));
 
 	if (is_vlan_key(tb[TCA_FLOWER_KEY_ETH_TYPE], &ethertype, key, mask)) {
 		fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_VLAN_ID,
@@ -1817,6 +1824,8 @@ static void fl_init_dissector(struct flow_dissector *dissector,
 			     FLOW_DISSECTOR_KEY_CT, ct);
 	FL_KEY_SET_IF_MASKED(mask, keys, cnt,
 			     FLOW_DISSECTOR_KEY_HASH, hash);
+	FL_KEY_SET_IF_MASKED(mask, keys, cnt,
+			     FLOW_DISSECTOR_KEY_NUM_OF_VLANS, num_of_vlans);
 
 	skb_flow_dissector_init(dissector, keys, cnt);
 }
@@ -2872,6 +2881,11 @@ static int fl_dump_key(struct sk_buff *skb, struct net *net,
 			    sizeof(key->basic.n_proto)))
 		goto nla_put_failure;
 
+	if (mask->num_of_vlans.num_of_vlans) {
+		if (nla_put_u8(skb, TCA_FLOWER_KEY_NUM_OF_VLANS, key->num_of_vlans.num_of_vlans))
+			goto nla_put_failure;
+	}
+
 	if (fl_dump_key_mpls(skb, &key->mpls, &mask->mpls))
 		goto nla_put_failure;
 
Signature · 1 line
2.29.2
#5 lore raw

PATCH 5/5 Consider the number of vlan tags for vlan filters

In reply to Boris Sukholitko

Currently the existence of vlan filters is conditional on the vlan protocol being matched in the tc rule. I.e. the following rule:

tc filter add dev eth1 ingress flower vlan_prio 5

is illegal because we lack protocol 802.1q in the rule.

Having the num_of_vlans filter configured removes this restriction. The following rule becomes ok:

tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5

because we know that the packet is single tagged.

---
 net/sched/cls_flower.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
net/sched/cls_flower.c +16 -8
index 42dd84f5a037..464a91e64b5f 100644
@@ -1023,8 +1023,10 @@ static void fl_set_key_vlan(struct nlattr **tb,
 			VLAN_PRIORITY_MASK;
 		key_mask->vlan_priority = VLAN_PRIORITY_MASK;
 	}
-	key_val->vlan_tpid = ethertype;
-	key_mask->vlan_tpid = cpu_to_be16(~0);
+	if (ethertype) {
+		key_val->vlan_tpid = ethertype;
+		key_mask->vlan_tpid = cpu_to_be16(~0);
+	}
 }
 
 static void fl_set_key_flag(u32 flower_key, u32 flower_mask,
@@ -1495,13 +1497,18 @@ static int fl_set_key_ct(struct nlattr **tb,
 }
 
 static bool is_vlan_key(struct nlattr *tb, __be16 *ethertype,
-			struct fl_flow_key *key, struct fl_flow_key *mask)
+			struct fl_flow_key *key, struct fl_flow_key *mask,
+			int vthresh)
 {
-	if (!tb)
-		return false;
+	const bool good_num_of_vlans = key->num_of_vlans.num_of_vlans > vthresh;
+
+	if (!tb) {
+		*ethertype = 0;
+		return good_num_of_vlans;
+	}
 
 	*ethertype = nla_get_be16(tb);
-	if (eth_type_vlan(*ethertype))
+	if (good_num_of_vlans || eth_type_vlan(*ethertype))
 		return true;
 
 	key->basic.n_proto = *ethertype;
@@ -1536,12 +1543,13 @@ static int fl_set_key(struct net *net, struct nlattr **tb,
 		       TCA_FLOWER_UNSPEC,
 		       sizeof(key->num_of_vlans));
 
-	if (is_vlan_key(tb[TCA_FLOWER_KEY_ETH_TYPE], &ethertype, key, mask)) {
+	if (is_vlan_key(tb[TCA_FLOWER_KEY_ETH_TYPE], &ethertype, key, mask, 0)) {
 		fl_set_key_vlan(tb, ethertype, TCA_FLOWER_KEY_VLAN_ID,
 				TCA_FLOWER_KEY_VLAN_PRIO, &key->vlan,
 				&mask->vlan);
 
-		if (is_vlan_key(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE], &ethertype, key, mask)) {
+		if (is_vlan_key(tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE],
+				&ethertype, key, mask, 1)) {
 			fl_set_key_vlan(tb, ethertype,
 					TCA_FLOWER_KEY_CVLAN_ID,
 					TCA_FLOWER_KEY_CVLAN_PRIO,
Signature · 1 line
2.29.2
maintainer
#6 lore raw
In reply to Boris Sukholitko
Quoted 13 lines · On Wed, 23 Mar 2022 12:55:57 +0200 Boris Sukholitko wrote:

Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet.

For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags.

This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet.

Quoted 6 lines

The following patch series implement number of vlans flower filter. They add num_of_vlans flower filter as an alternative to vlan ethtype protocol matching. The end result is that the following command becomes possible:

tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop

# Form letter - net-next is closed

We have already sent the networking pull request for 5.18 and therefore net-next is closed for new drivers, features, code refactoring and optimizations. We are currently accepting bug fixes only.

Please repost when net-next reopens after 5.18-rc1 is cut.

RFC patches sent for review only are obviously welcome at any time.