configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj board
PATCH 1/1 configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj board
Enable LTO on mamoj to reduce SPL and uboot size. Tested with gcc gcc-11.1.0
U-Boot 2022.04-rc4-00051-g17fc5facd0 (Mar 23 2022 - 16:43:43 +0100)
CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 40C Reset cause: POR Model: BTicino i.MX6DL Mamoj board DRAM: 512 MiB Core: 29 devices, 12 uclasses, devicetree: separate MMC: FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial
Net:
Error: ethernet@2188000 address not set.
No ethernet found.
---
configs/imx6dl_mamoj_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/imx6dl_mamoj_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SPL_DRIVERS_MISC=y CONFIG_IMX_HAB=y # CONFIG_CMD_BMODE is not set +CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_SPL_OS_BOOT=y
Signature · 1 line
2.25.1
Quoted 17 lines · Michael Trimarchi
Enable LTO on mamoj to reduce SPL and uboot size. Tested with gcc gcc-11.1.0
U-Boot 2022.04-rc4-00051-g17fc5facd0 (Mar 23 2022 - 16:43:43 +0100)
CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 40C Reset cause: POR Model: BTicino i.MX6DL Mamoj board DRAM: 512 MiB Core: 29 devices, 12 uclasses, devicetree: separate MMC: FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial
Quoted 6 lines
Net:
Error: ethernet@2188000 address not set.
No ethernet found.Tested-by Raffaele RECALCATI <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>
PATCH 1/1 configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj board
In reply to Michael TrimarchiQuoted 14 lines
Enable LTO on mamoj to reduce SPL and uboot size. Tested with gcc gcc-11.1.0
U-Boot 2022.04-rc4-00051-g17fc5facd0 (Mar 23 2022 - 16:43:43 +0100)CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 40C Reset cause: POR Model: BTicino i.MX6DL Mamoj board DRAM: 512 MiB Core: 29 devices, 12 uclasses, devicetree: separate MMC: FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial
Quoted 6 lines
Net:
Error: ethernet@2188000 address not set.
No ethernet found.Tested-by Raffaele RECALCATI <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================