hw/core: Sync uboot_image.h from U-Boot v2022.01
PATCH 1/2 hw/core: Sync uboot_image.h from U-Boot v2022.01
From: Bin Meng <[email protected]>
Sync uboot_image.h from upstream U-Boot v2022.01 release [1].
[1] https://source.denx.de/u-boot/u-boot/-/blob/v2022.01/include/image.h
---
hw/core/uboot_image.h | 213 ++++++++++++++++++++++++++++-------------- 1 file changed, 142 insertions(+), 71 deletions(-)
hw/core/uboot_image.h +142 -71
@@ -1,23 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* +* (C) Copyright 2008 Semihalf +* * (C) Copyright 2000-2005 * Wolfgang Denk, DENX Software Engineering, [email protected]. -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, see <http://www.gnu.org/licenses/>. -* ******************************************************************** * NOTE: This header file defines an interface to U-Boot. Including * this (unmodified) header file in another file is considered normal
@@ -31,50 +17,83 @@/* * Operating System Codes +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_OS_INVALID 0/* Invalid OS */ -#define IH_OS_OPENBSD 1/* OpenBSD */ -#define IH_OS_NETBSD 2/* NetBSD */ -#define IH_OS_FREEBSD 3/* FreeBSD */ -#define IH_OS_4_4BSD 4/* 4.4BSD */ -#define IH_OS_LINUX 5/* Linux */ -#define IH_OS_SVR4 6/* SVR4 */ -#define IH_OS_ESIX 7/* Esix */ -#define IH_OS_SOLARIS 8/* Solaris */ -#define IH_OS_IRIX 9/* Irix */ -#define IH_OS_SCO 10/* SCO */ -#define IH_OS_DELL 11/* Dell */ -#define IH_OS_NCR 12/* NCR */ -#define IH_OS_LYNXOS 13/* LynxOS */ -#define IH_OS_VXWORKS 14/* VxWorks */ -#define IH_OS_PSOS 15/* pSOS */ -#define IH_OS_QNX 16/* QNX */ -#define IH_OS_U_BOOT 17/* Firmware */ -#define IH_OS_RTEMS 18/* RTEMS */ -#define IH_OS_ARTOS 19/* ARTOS */ -#define IH_OS_UNITY 20/* Unity OS */ +enum { +IH_OS_INVALID =0 ,/* Invalid OS */ +IH_OS_OPENBSD ,/* OpenBSD */ +IH_OS_NETBSD ,/* NetBSD */ +IH_OS_FREEBSD ,/* FreeBSD */ +IH_OS_4_4BSD ,/* 4.4BSD */ +IH_OS_LINUX ,/* Linux */ +IH_OS_SVR4 ,/* SVR4 */ +IH_OS_ESIX ,/* Esix */ +IH_OS_SOLARIS ,/* Solaris */ +IH_OS_IRIX ,/* Irix */ +IH_OS_SCO ,/* SCO */ +IH_OS_DELL ,/* Dell */ +IH_OS_NCR ,/* NCR */ +IH_OS_LYNXOS ,/* LynxOS */ +IH_OS_VXWORKS ,/* VxWorks */ +IH_OS_PSOS ,/* pSOS */ +IH_OS_QNX ,/* QNX */ +IH_OS_U_BOOT ,/* Firmware */ +IH_OS_RTEMS ,/* RTEMS */ +IH_OS_ARTOS ,/* ARTOS */ +IH_OS_UNITY ,/* Unity OS */ +IH_OS_INTEGRITY ,/* INTEGRITY */ +IH_OS_OSE ,/* OSE */ +IH_OS_PLAN9 ,/* Plan 9 */ +IH_OS_OPENRTOS ,/* OpenRTOS */ +IH_OS_ARM_TRUSTED_FIRMWARE ,/* ARM Trusted Firmware */ +IH_OS_TEE ,/* Trusted Execution Environment */ +IH_OS_OPENSBI ,/* RISC-V OpenSBI */ +IH_OS_EFI ,/* EFI Firmware (e.g. GRUB2) */ + +IH_OS_COUNT , +};/* * CPU Architecture Codes (supported by Linux) +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_CPU_INVALID 0/* Invalid CPU */ -#define IH_CPU_ALPHA 1/* Alpha */ -#define IH_CPU_ARM 2/* ARM */ -#define IH_CPU_I386 3/* Intel x86 */ -#define IH_CPU_IA64 4/* IA64 */ -#define IH_CPU_MIPS 5/* MIPS */ -#define IH_CPU_MIPS64 6/* MIPS 64 Bit */ -#define IH_CPU_PPC 7/* PowerPC */ -#define IH_CPU_S390 8/* IBM S390 */ -#define IH_CPU_SH 9/* SuperH */ -#define IH_CPU_SPARC 10/* Sparc */ -#define IH_CPU_SPARC64 11/* Sparc 64 Bit */ -#define IH_CPU_M68K 12/* M68K */ -#define IH_CPU_NIOS 13/* Nios-32 */ -#define IH_CPU_MICROBLAZE 14/* MicroBlaze */ -#define IH_CPU_NIOS2 15/* Nios-II */ -#define IH_CPU_BLACKFIN 16/* Blackfin */ -#define IH_CPU_AVR32 17/* AVR32 */ +enum { +IH_ARCH_INVALID =0 ,/* Invalid CPU */ +IH_ARCH_ALPHA ,/* Alpha */ +IH_ARCH_ARM ,/* ARM */ +IH_ARCH_I386 ,/* Intel x86 */ +IH_ARCH_IA64 ,/* IA64 */ +IH_ARCH_MIPS ,/* MIPS */ +IH_ARCH_MIPS64 ,/* MIPS 64 Bit */ +IH_ARCH_PPC ,/* PowerPC */ +IH_ARCH_S390 ,/* IBM S390 */ +IH_ARCH_SH ,/* SuperH */ +IH_ARCH_SPARC ,/* Sparc */ +IH_ARCH_SPARC64 ,/* Sparc 64 Bit */ +IH_ARCH_M68K ,/* M68K */ +IH_ARCH_NIOS ,/* Nios-32 */ +IH_ARCH_MICROBLAZE ,/* MicroBlaze */ +IH_ARCH_NIOS2 ,/* Nios-II */ +IH_ARCH_BLACKFIN ,/* Blackfin */ +IH_ARCH_AVR32 ,/* AVR32 */ +IH_ARCH_ST200 ,/* STMicroelectronics ST200 */ +IH_ARCH_SANDBOX ,/* Sandbox architecture (test only) */ +IH_ARCH_NDS32 ,/* ANDES Technology - NDS32 */ +IH_ARCH_OPENRISC ,/* OpenRISC 1000 */ +IH_ARCH_ARM64 ,/* ARM64 */ +IH_ARCH_ARC ,/* Synopsys DesignWare ARC */ +IH_ARCH_X86_64 ,/* AMD x86_64, Intel and Via */ +IH_ARCH_XTENSA ,/* Xtensa */ +IH_ARCH_RISCV ,/* RISC-V */ + +IH_ARCH_COUNT , +};/* * Image Types
@@ -113,33 +132,85 @@* U-Boot's command interpreter; this feature is especially * useful when you configure U-Boot to use a real shell (hush) * as command interpreter (=> Shell Scripts). +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_TYPE_INVALID 0/* Invalid Image */ -#define IH_TYPE_STANDALONE 1/* Standalone Program */ -#define IH_TYPE_KERNEL 2/* OS Kernel Image */ -#define IH_TYPE_RAMDISK 3/* RAMDisk Image */ -#define IH_TYPE_MULTI 4/* Multi-File Image */ -#define IH_TYPE_FIRMWARE 5/* Firmware Image */ -#define IH_TYPE_SCRIPT 6/* Script file */ -#define IH_TYPE_FILESYSTEM 7/* Filesystem Image (any type) */ -#define IH_TYPE_FLATDT 8/* Binary Flat Device Tree Blob */ -#define IH_TYPE_KERNEL_NOLOAD 14/* OS Kernel Image (noload) */ +enum { +IH_TYPE_INVALID =0 ,/* Invalid Image */ +IH_TYPE_STANDALONE ,/* Standalone Program */ +IH_TYPE_KERNEL ,/* OS Kernel Image */ +IH_TYPE_RAMDISK ,/* RAMDisk Image */ +IH_TYPE_MULTI ,/* Multi-File Image */ +IH_TYPE_FIRMWARE ,/* Firmware Image */ +IH_TYPE_SCRIPT ,/* Script file */ +IH_TYPE_FILESYSTEM ,/* Filesystem Image (any type) */ +IH_TYPE_FLATDT ,/* Binary Flat Device Tree Blob */ +IH_TYPE_KWBIMAGE ,/* Kirkwood Boot Image */ +IH_TYPE_IMXIMAGE ,/* Freescale IMXBoot Image */ +IH_TYPE_UBLIMAGE ,/* Davinci UBL Image */ +IH_TYPE_OMAPIMAGE ,/* TI OMAP Config Header Image */ +IH_TYPE_AISIMAGE ,/* TI Davinci AIS Image */ +/* OS Kernel Image, can run from any load address */ +IH_TYPE_KERNEL_NOLOAD , +IH_TYPE_PBLIMAGE ,/* Freescale PBL Boot Image */ +IH_TYPE_MXSIMAGE ,/* Freescale MXSBoot Image */ +IH_TYPE_GPIMAGE ,/* TI Keystone GPHeader Image */ +IH_TYPE_ATMELIMAGE ,/* ATMEL ROM bootable Image */ +IH_TYPE_SOCFPGAIMAGE ,/* Altera SOCFPGA CV/AV Preloader */ +IH_TYPE_X86_SETUP ,/* x86 setup.bin Image */ +IH_TYPE_LPC32XXIMAGE ,/* x86 setup.bin Image */ +IH_TYPE_LOADABLE ,/* A list of typeless images */ +IH_TYPE_RKIMAGE ,/* Rockchip Boot Image */ +IH_TYPE_RKSD ,/* Rockchip SD card */ +IH_TYPE_RKSPI ,/* Rockchip SPI image */ +IH_TYPE_ZYNQIMAGE ,/* Xilinx Zynq Boot Image */ +IH_TYPE_ZYNQMPIMAGE ,/* Xilinx ZynqMP Boot Image */ +IH_TYPE_ZYNQMPBIF ,/* Xilinx ZynqMP Boot Image (bif) */ +IH_TYPE_FPGA ,/* FPGA Image */ +IH_TYPE_VYBRIDIMAGE ,/* VYBRID .vyb Image */ +IH_TYPE_TEE ,/* Trusted Execution Environment OS Image */ +IH_TYPE_FIRMWARE_IVT ,/* Firmware Image with HABv4 IVT */ +IH_TYPE_PMMC ,/* TI Power Management Micro-Controller Firmware */ +IH_TYPE_STM32IMAGE ,/* STMicroelectronics STM32 Image */ +IH_TYPE_SOCFPGAIMAGE_V1 ,/* Altera SOCFPGA A10 Preloader */ +IH_TYPE_MTKIMAGE ,/* MediaTek BootROM loadable Image */ +IH_TYPE_IMX8MIMAGE ,/* Freescale IMX8MBoot Image */ +IH_TYPE_IMX8IMAGE ,/* Freescale IMX8Boot Image */ +IH_TYPE_COPRO ,/* Coprocessor Image for remoteproc*/ +IH_TYPE_SUNXI_EGON ,/* Allwinner eGON Boot Image */ + +IH_TYPE_COUNT ,/* Number of image types */ +};/* * Compression Types +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_COMP_NONE 0/* No Compression Used */ -#define IH_COMP_GZIP 1/* gzip Compression Used */ -#define IH_COMP_BZIP2 2/* bzip2 Compression Used */ +enum { +IH_COMP_NONE =0 ,/* No Compression Used */ +IH_COMP_GZIP ,/* gzip Compression Used */ +IH_COMP_BZIP2 ,/* bzip2 Compression Used */ +IH_COMP_LZMA ,/* lzma Compression Used */ +IH_COMP_LZO ,/* lzo Compression Used */ +IH_COMP_LZ4 ,/* lz4 Compression Used */ +IH_COMP_ZSTD ,/* zstd Compression Used */ + +IH_COMP_COUNT , +};#define IH_MAGIC 0x27051956/* Image Magic Number */ #define IH_NMLEN 32/* Image Name Length */ /* -* all data in network byte order (aka natural aka bigendian) +* Legacy format image header, +* all data in network byte order (aka natural aka bigendian). */ - typedef struct uboot_image_header { uint32_t ih_magic; /* Image Header Magic Number */ uint32_t ih_hcrc; /* Image Header CRC Checksum */
Signature · 1 line
2.25.1
PATCH 2/2 hw/core: loader: Setting is_linux to true for VxWorks uImage
From: Bin Meng <[email protected]>
VxWorks 7 now uses the same boot interface as the Linux kernel on Arm64, PowerPC and RISC-V architectures, except Arm. Add logic to set is_linux to true for VxWorks uImage for these architectures in load_uboot_image().
---
hw/core/loader.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
hw/core/loader.c +15 -0
@@ -697,6 +697,21 @@ static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr,if (is_linux) {if (hdr->ih_os ==IH_OS_LINUX ) { *is_linux =1 ; + }else if (hdr->ih_os ==IH_OS_VXWORKS ) { +/* +* VxWorks 7 uses the same boot interface as the Linux kernel +* on Arm64, PowerPC and RISC-V architectures, except Arm. +*/ +switch (hdr->ih_arch) { +case IH_ARCH_ARM64 : +case IH_ARCH_PPC : +case IH_ARCH_RISCV : + *is_linux =1 ; +break ; +default : + *is_linux =0 ; +break ; + } }else { *is_linux =0 ; }
Signature · 1 line
2.25.1
Re: [PATCH 2/2] hw/core: loader: Setting is_linux to true for VxWorks uImage
Quoted 7 lines · Bin Meng
From: Bin Meng <[email protected]>
VxWorks 7 now uses the same boot interface as the Linux kernel on Arm64, PowerPC and RISC-V architectures, except Arm. Add logic to set
is_linuxto true for VxWorks uImage for these architectures inload_uboot_image().
Quoted 5 lines
Signed-off-by Bin Meng <[email protected]>---
hw/core/loader.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
Re: [PATCH 2/2] hw/core: loader: Setting is_linux to true for VxWorks uImage
In reply to Bin MengQuoted 19 lines · Bin Meng
From: Bin Meng <[email protected]>
VxWorks 7 now uses the same boot interface as the Linux kernel on Arm64, PowerPC and RISC-V architectures, except Arm. Add logic to set
is_linuxto true for VxWorks uImage for these architectures inload_uboot_image().Signed-off-by Bin Meng <[email protected]>---
hw/core/loader.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)hw/core/loader.c +0
-0
hw/core/loader.c static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr, · line 703
Quoted 7 lines
hw/core/loader.c +4
-0@@ -697,6 +697,21 @@ static int load_uboot_image(const char *filename, hwaddr *ep, hwaddr *loadaddr,if (is_linux) {if (hdr->ih_os ==IH_OS_LINUX ) { *is_linux =1 ; + }else if (hdr->ih_os ==IH_OS_VXWORKS ) { +/* +* VxWorks 7 uses the same boot interface as the Linux kernel +* on Arm64, PowerPC and RISC-V architectures, except Arm.
"on Arm (64-bit only), PowerPC and RISC-V architectures".
thanks
-- PMM
Quoted 8 lines · Bin Meng
From: Bin Meng <[email protected]>
Sync
uboot_image.hfrom upstream U-Boot v2022.01 release [1].[1] https://source.denx.de/u-boot/u-boot/-/blob/v2022.01/include/image.h
Signed-off-by Bin Meng <[email protected]>
Alistair
Quoted 264 lines
---
hw/core/uboot_image.h | 213 ++++++++++++++++++++++++++++-------------- 1 file changed, 142 insertions(+), 71 deletions(-)hw/core/uboot_image.h +142
-72@@ -1,23 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* +* (C) Copyright 2008 Semihalf +* * (C) Copyright 2000-2005 * Wolfgang Denk, DENX Software Engineering, [email protected]. -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, see <http://www.gnu.org/licenses/>. -* ******************************************************************** * NOTE: This header file defines an interface to U-Boot. Including * this (unmodified) header file in another file is considered normal @@ -31,50 +17,83 @@/* * Operating System Codes +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_OS_INVALID 0/* Invalid OS */ -#define IH_OS_OPENBSD 1/* OpenBSD */ -#define IH_OS_NETBSD 2/* NetBSD */ -#define IH_OS_FREEBSD 3/* FreeBSD */ -#define IH_OS_4_4BSD 4/* 4.4BSD */ -#define IH_OS_LINUX 5/* Linux */ -#define IH_OS_SVR4 6/* SVR4 */ -#define IH_OS_ESIX 7/* Esix */ -#define IH_OS_SOLARIS 8/* Solaris */ -#define IH_OS_IRIX 9/* Irix */ -#define IH_OS_SCO 10/* SCO */ -#define IH_OS_DELL 11/* Dell */ -#define IH_OS_NCR 12/* NCR */ -#define IH_OS_LYNXOS 13/* LynxOS */ -#define IH_OS_VXWORKS 14/* VxWorks */ -#define IH_OS_PSOS 15/* pSOS */ -#define IH_OS_QNX 16/* QNX */ -#define IH_OS_U_BOOT 17/* Firmware */ -#define IH_OS_RTEMS 18/* RTEMS */ -#define IH_OS_ARTOS 19/* ARTOS */ -#define IH_OS_UNITY 20/* Unity OS */ +enum { +IH_OS_INVALID =0 ,/* Invalid OS */ +IH_OS_OPENBSD ,/* OpenBSD */ +IH_OS_NETBSD ,/* NetBSD */ +IH_OS_FREEBSD ,/* FreeBSD */ +IH_OS_4_4BSD ,/* 4.4BSD */ +IH_OS_LINUX ,/* Linux */ +IH_OS_SVR4 ,/* SVR4 */ +IH_OS_ESIX ,/* Esix */ +IH_OS_SOLARIS ,/* Solaris */ +IH_OS_IRIX ,/* Irix */ +IH_OS_SCO ,/* SCO */ +IH_OS_DELL ,/* Dell */ +IH_OS_NCR ,/* NCR */ +IH_OS_LYNXOS ,/* LynxOS */ +IH_OS_VXWORKS ,/* VxWorks */ +IH_OS_PSOS ,/* pSOS */ +IH_OS_QNX ,/* QNX */ +IH_OS_U_BOOT ,/* Firmware */ +IH_OS_RTEMS ,/* RTEMS */ +IH_OS_ARTOS ,/* ARTOS */ +IH_OS_UNITY ,/* Unity OS */ +IH_OS_INTEGRITY ,/* INTEGRITY */ +IH_OS_OSE ,/* OSE */ +IH_OS_PLAN9 ,/* Plan 9 */ +IH_OS_OPENRTOS ,/* OpenRTOS */ +IH_OS_ARM_TRUSTED_FIRMWARE ,/* ARM Trusted Firmware */ +IH_OS_TEE ,/* Trusted Execution Environment */ +IH_OS_OPENSBI ,/* RISC-V OpenSBI */ +IH_OS_EFI ,/* EFI Firmware (e.g. GRUB2) */ + +IH_OS_COUNT , +};/* * CPU Architecture Codes (supported by Linux) +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_CPU_INVALID 0/* Invalid CPU */ -#define IH_CPU_ALPHA 1/* Alpha */ -#define IH_CPU_ARM 2/* ARM */ -#define IH_CPU_I386 3/* Intel x86 */ -#define IH_CPU_IA64 4/* IA64 */ -#define IH_CPU_MIPS 5/* MIPS */ -#define IH_CPU_MIPS64 6/* MIPS 64 Bit */ -#define IH_CPU_PPC 7/* PowerPC */ -#define IH_CPU_S390 8/* IBM S390 */ -#define IH_CPU_SH 9/* SuperH */ -#define IH_CPU_SPARC 10/* Sparc */ -#define IH_CPU_SPARC64 11/* Sparc 64 Bit */ -#define IH_CPU_M68K 12/* M68K */ -#define IH_CPU_NIOS 13/* Nios-32 */ -#define IH_CPU_MICROBLAZE 14/* MicroBlaze */ -#define IH_CPU_NIOS2 15/* Nios-II */ -#define IH_CPU_BLACKFIN 16/* Blackfin */ -#define IH_CPU_AVR32 17/* AVR32 */ +enum { +IH_ARCH_INVALID =0 ,/* Invalid CPU */ +IH_ARCH_ALPHA ,/* Alpha */ +IH_ARCH_ARM ,/* ARM */ +IH_ARCH_I386 ,/* Intel x86 */ +IH_ARCH_IA64 ,/* IA64 */ +IH_ARCH_MIPS ,/* MIPS */ +IH_ARCH_MIPS64 ,/* MIPS 64 Bit */ +IH_ARCH_PPC ,/* PowerPC */ +IH_ARCH_S390 ,/* IBM S390 */ +IH_ARCH_SH ,/* SuperH */ +IH_ARCH_SPARC ,/* Sparc */ +IH_ARCH_SPARC64 ,/* Sparc 64 Bit */ +IH_ARCH_M68K ,/* M68K */ +IH_ARCH_NIOS ,/* Nios-32 */ +IH_ARCH_MICROBLAZE ,/* MicroBlaze */ +IH_ARCH_NIOS2 ,/* Nios-II */ +IH_ARCH_BLACKFIN ,/* Blackfin */ +IH_ARCH_AVR32 ,/* AVR32 */ +IH_ARCH_ST200 ,/* STMicroelectronics ST200 */ +IH_ARCH_SANDBOX ,/* Sandbox architecture (test only) */ +IH_ARCH_NDS32 ,/* ANDES Technology - NDS32 */ +IH_ARCH_OPENRISC ,/* OpenRISC 1000 */ +IH_ARCH_ARM64 ,/* ARM64 */ +IH_ARCH_ARC ,/* Synopsys DesignWare ARC */ +IH_ARCH_X86_64 ,/* AMD x86_64, Intel and Via */ +IH_ARCH_XTENSA ,/* Xtensa */ +IH_ARCH_RISCV ,/* RISC-V */ + +IH_ARCH_COUNT , +};/* * Image Types @@ -113,33 +132,85 @@* U-Boot's command interpreter; this feature is especially * useful when you configure U-Boot to use a real shell (hush) * as command interpreter (=> Shell Scripts). +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_TYPE_INVALID 0/* Invalid Image */ -#define IH_TYPE_STANDALONE 1/* Standalone Program */ -#define IH_TYPE_KERNEL 2/* OS Kernel Image */ -#define IH_TYPE_RAMDISK 3/* RAMDisk Image */ -#define IH_TYPE_MULTI 4/* Multi-File Image */ -#define IH_TYPE_FIRMWARE 5/* Firmware Image */ -#define IH_TYPE_SCRIPT 6/* Script file */ -#define IH_TYPE_FILESYSTEM 7/* Filesystem Image (any type) */ -#define IH_TYPE_FLATDT 8/* Binary Flat Device Tree Blob */ -#define IH_TYPE_KERNEL_NOLOAD 14/* OS Kernel Image (noload) */ +enum { +IH_TYPE_INVALID =0 ,/* Invalid Image */ +IH_TYPE_STANDALONE ,/* Standalone Program */ +IH_TYPE_KERNEL ,/* OS Kernel Image */ +IH_TYPE_RAMDISK ,/* RAMDisk Image */ +IH_TYPE_MULTI ,/* Multi-File Image */ +IH_TYPE_FIRMWARE ,/* Firmware Image */ +IH_TYPE_SCRIPT ,/* Script file */ +IH_TYPE_FILESYSTEM ,/* Filesystem Image (any type) */ +IH_TYPE_FLATDT ,/* Binary Flat Device Tree Blob */ +IH_TYPE_KWBIMAGE ,/* Kirkwood Boot Image */ +IH_TYPE_IMXIMAGE ,/* Freescale IMXBoot Image */ +IH_TYPE_UBLIMAGE ,/* Davinci UBL Image */ +IH_TYPE_OMAPIMAGE ,/* TI OMAP Config Header Image */ +IH_TYPE_AISIMAGE ,/* TI Davinci AIS Image */ +/* OS Kernel Image, can run from any load address */ +IH_TYPE_KERNEL_NOLOAD , +IH_TYPE_PBLIMAGE ,/* Freescale PBL Boot Image */ +IH_TYPE_MXSIMAGE ,/* Freescale MXSBoot Image */ +IH_TYPE_GPIMAGE ,/* TI Keystone GPHeader Image */ +IH_TYPE_ATMELIMAGE ,/* ATMEL ROM bootable Image */ +IH_TYPE_SOCFPGAIMAGE ,/* Altera SOCFPGA CV/AV Preloader */ +IH_TYPE_X86_SETUP ,/* x86 setup.bin Image */ +IH_TYPE_LPC32XXIMAGE ,/* x86 setup.bin Image */ +IH_TYPE_LOADABLE ,/* A list of typeless images */ +IH_TYPE_RKIMAGE ,/* Rockchip Boot Image */ +IH_TYPE_RKSD ,/* Rockchip SD card */ +IH_TYPE_RKSPI ,/* Rockchip SPI image */ +IH_TYPE_ZYNQIMAGE ,/* Xilinx Zynq Boot Image */ +IH_TYPE_ZYNQMPIMAGE ,/* Xilinx ZynqMP Boot Image */ +IH_TYPE_ZYNQMPBIF ,/* Xilinx ZynqMP Boot Image (bif) */ +IH_TYPE_FPGA ,/* FPGA Image */ +IH_TYPE_VYBRIDIMAGE ,/* VYBRID .vyb Image */ +IH_TYPE_TEE ,/* Trusted Execution Environment OS Image */ +IH_TYPE_FIRMWARE_IVT ,/* Firmware Image with HABv4 IVT */ +IH_TYPE_PMMC ,/* TI Power Management Micro-Controller Firmware */ +IH_TYPE_STM32IMAGE ,/* STMicroelectronics STM32 Image */ +IH_TYPE_SOCFPGAIMAGE_V1 ,/* Altera SOCFPGA A10 Preloader */ +IH_TYPE_MTKIMAGE ,/* MediaTek BootROM loadable Image */ +IH_TYPE_IMX8MIMAGE ,/* Freescale IMX8MBoot Image */ +IH_TYPE_IMX8IMAGE ,/* Freescale IMX8Boot Image */ +IH_TYPE_COPRO ,/* Coprocessor Image for remoteproc*/ +IH_TYPE_SUNXI_EGON ,/* Allwinner eGON Boot Image */ + +IH_TYPE_COUNT ,/* Number of image types */ +};/* * Compression Types +* +* The following are exposed to uImage header. +* New IDs *MUST* be appended at the end of the list and *NEVER* +* inserted for backward compatibility. */ -#define IH_COMP_NONE 0/* No Compression Used */ -#define IH_COMP_GZIP 1/* gzip Compression Used */ -#define IH_COMP_BZIP2 2/* bzip2 Compression Used */ +enum { +IH_COMP_NONE =0 ,/* No Compression Used */ +IH_COMP_GZIP ,/* gzip Compression Used */ +IH_COMP_BZIP2 ,/* bzip2 Compression Used */ +IH_COMP_LZMA ,/* lzma Compression Used */ +IH_COMP_LZO ,/* lzo Compression Used */ +IH_COMP_LZ4 ,/* lz4 Compression Used */ +IH_COMP_ZSTD ,/* zstd Compression Used */ + +IH_COMP_COUNT , +};#define IH_MAGIC 0x27051956/* Image Magic Number */ #define IH_NMLEN 32/* Image Name Length */ /* -* all data in network byte order (aka natural aka bigendian) +* Legacy format image header, +* all data in network byte order (aka natural aka bigendian). */ - typedef struct uboot_image_header { uint32_t ih_magic; /* Image Header Magic Number */ uint32_t ih_hcrc; /* Image Header CRC Checksum */ --2.25.1