libsemanage: Fallback to semanage_copy_dir when rename() failed
PATCH 1/1 libsemanage: Fallback to semanage_copy_dir when rename() failed
In some circumstances, like semanage-store being on overlayfs, rename() could fail with EXDEV - Invalid cross-device link. This is due to fact that overlays doesn't support rename() is source and target are not on the same layer, e.g. in rpm-ostree based containers. Even though it's not atomic operation, it's better to try to to copy files from src to dst on our own in this case. Next rebuild will probably not fail as the new directories will be on the same layer.
Fixes: https://github.com/SELinuxProject/selinux/issues/343
Before:
# semodule -B
libsemanage.semanage_commit_sandbox: Error while renaming /etc/selinux/targeted/active to /etc/selinux/targeted/previous. (Invalid cross-device link).
semodule: Failed!After:
# semodule -B
Warning: rename(/etc/selinux/targeted/active, /etc/selinux/targeted/previous) failed: Invalid cross-device link, fallback to non-atomic semanage_copy_dir_flags()--- libsemanage/src/semanage_store.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)
libsemanage/src/semanage_store.c +24 -7
@@ -697,6 +697,10 @@ int semanage_store_access_check(void)/********************* other I/O functions *********************/ +static int semanage_rename (const char *tmp,const char *dst); +int semanage_remove_directory (const char *path); +static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +/* Callback used by scandir() to select files. */ static int semanage_filename_select (const struct dirent *d) {
@@ -760,7 +764,7 @@ int semanage_copy_file(const char *src, const char *dst, mode_t mode, retval =-1 ; } -if (!retval &&rename (tmp, dst) ==-1 ) +if (!retval &&semanage_rename (tmp, dst) ==-1 )return -1 ; out:
@@ -768,7 +772,20 @@ out:return retval; } -static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +static int semanage_rename (const char *src,const char *dst) { +int retval =-1 ; + + retval =rename (src, dst); +if (retval ==0 || errno !=EXDEV ) +return retval; + +/* we can't use rename() due to filesystem limitation, lets try to copy files manually */ +fprintf (stderr,"Warning: rename(%s, %s) failed: %s, fallback to non-atomic semanage_copy_dir_flags()\n" , src, dst,strerror (errno)); +if (semanage_copy_dir_flags (src, dst,1 ) ==-1 ) { +return -1 ; + } +return semanage_remove_directory (src); +}/* Copies all of the files from src to dst, recursing into * subdirectories. Returns 0 on success, -1 on error. */
@@ -1770,7 +1787,7 @@ static int semanage_commit_sandbox(semanage_handle_t * sh) goto cleanup; } -if (rename (active, backup) ==-1 ) { +if (semanage_rename (active, backup) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , active, backup); retval =-1 ; goto cleanup;
@@ -1779,12 +1796,12 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)/* clean up some files from the sandbox before install */ /* remove homedir_template from sandbox */ -if (rename (sandbox, active) ==-1 ) { +if (semanage_rename (sandbox, active) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , sandbox, active);/* note that if an error occurs during the next * function then the store will be left in an * inconsistent state */ -if (rename (backup, active) <0 ) +if (semanage_rename (backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active); retval =-1 ;
@@ -1795,10 +1812,10 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)* function then the store will be left in an * inconsistent state */ int errsv = errno; -if (rename (active, sandbox) <0 ) +if (semanage_rename (active, sandbox) <0 )ERR (sh,"Error while renaming %s back to %s." , active, sandbox); -else if (rename (backup, active) <0 ) +else if (semanage_rename (backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active);else
Signature · 1 line
2.35.1
On Wed, Mar 23, 2022 at 6:34 PM Petr Lautrbach <[email protected]> wrote:
In subject: s/Fallback/Fall back/ and s/failed/fails/
Other than a couple nits above and below the patch looks good to me.
I think we could make the fallback rename atomic by creating a file before the rename, removing it afterwards, and checking if it exists at the beginning of each transaction (in case it does, we would retry the rename from scratch before proceeding). But maybe it's not worth the hassle for such a corner case...
Quoted 2 lines
In some circumstances, like semanage-store being on overlayfs,
rename()could fail with EXDEV - Invalid cross-device link. This is due to fact
due to the
Quoted 1 line
that overlays doesn't support
rename()is source and target are not on
s/is/if/
Quoted 2 lines
the same layer, e.g. in rpm-ostree based containers. Even though it's not atomic operation, it's better to try to to copy files from src to
s/to to/to/
Quoted 44 lines
dst on our own in this case. Next rebuild will probably not fail as the new directories will be on the same layer.
Fixes: https://github.com/SELinuxProject/selinux/issues/343
Before:# semodule -B libsemanage.semanage_commit_sandbox: Error while renaming /etc/selinux/targeted/active to /etc/selinux/targeted/previous. (Invalid cross-device link). semodule: Failed!After:
# semodule -B Warning: rename(/etc/selinux/targeted/active, /etc/selinux/targeted/previous) failed: Invalid cross-device link, fallback to non-atomic semanage_copy_dir_flags()Reported-by Joseph Marrero Corchado <[email protected]>Signed-off-by Petr Lautrbach <[email protected]>--- libsemanage/src/semanage_store.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-)libsemanage/src/semanage_store.c +5
-1@@ -697,6 +697,10 @@ int semanage_store_access_check(void)/********************* other I/O functions *********************/ +static int semanage_rename (const char *tmp,const char *dst); +int semanage_remove_directory (const char *path);rename +static int semanage_copy_dir_flags(const char *src, const char *dst, int flag); +/* Callback used by scandir() to select files. */ static int semanage_filename_select (const struct dirent *d) {@@ -760,7 +764,7 @@ int semanage_copy_file(const char *src, const char *dst, mode_t mode, retval =-1 ; } -if (!retval &&rename (tmp, dst) ==-1 ) +if (!retval &&semanage_rename (tmp, dst) ==-1 )return -1 ; out:
libsemanage/src/semanage_store.c out: · line 776
Quoted 6 lines
libsemanage/src/semanage_store.c +2
-1@@ -768,7 +772,20 @@ out:return retval; } -static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +static int semanage_rename (const char *src,const char *dst) { +int retval =-1 ;
The value is immediately overwritten, so there is no need to initialize retval to -1 here.
libsemanage/src/semanage_store.c out: · line 783
Quoted 7 lines
libsemanage/src/semanage_store.c +7
-0+ + retval =rename (src, dst); +if (retval ==0 || errno !=EXDEV ) +return retval; + +/* we can't use rename() due to filesystem limitation, lets try to copy files manually */ +fprintf (stderr,"Warning: rename(%s, %s) failed: %s, fallback to non-atomic semanage_copy_dir_flags()\n" , src, dst,strerror (errno));
I believe this should use the WARN() macro from debug.h instead. Also s/fallback/fall back/.
Quoted 48 lines
libsemanage/src/semanage_store.c +10
-6+if (semanage_copy_dir_flags (src, dst,1 ) ==-1 ) { +return -1 ; + } +return semanage_remove_directory (src); +}/* Copies all of the files from src to dst, recursing into * subdirectories. Returns 0 on success, -1 on error. */ @@ -1770,7 +1787,7 @@ static int semanage_commit_sandbox(semanage_handle_t * sh) goto cleanup; } -if (rename (active, backup) ==-1 ) { +if (semanage_rename (active, backup) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , active, backup); retval =-1 ; goto cleanup;@@ -1779,12 +1796,12 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)/* clean up some files from the sandbox before install */ /* remove homedir_template from sandbox */ -if (rename (sandbox, active) ==-1 ) { +if (semanage_rename (sandbox, active) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , sandbox, active);/* note that if an error occurs during the next * function then the store will be left in an * inconsistent state */ -if (rename (backup, active) <0 ) +if (semanage_rename (backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active); retval =-1 ;@@ -1795,10 +1812,10 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)* function then the store will be left in an * inconsistent state */ int errsv = errno; -if (rename (active, sandbox) <0 ) +if (semanage_rename (active, sandbox) <0 )ERR (sh,"Error while renaming %s back to %s." , active, sandbox); -else if (rename (backup, active) <0 ) +else if (semanage_rename (backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active);else --2.35.1
Signature · 3 lines
Ondrej Mosnacek Software Engineer, Linux Security - SELinux kernel Red Hat, Inc.
PATCH v2 1/1 libsemanage: Fall back to semanage_copy_dir when rename() fails
In some circumstances, like semanage-store being on overlayfs, rename() could fail with EXDEV - Invalid cross-device link. This is due to the fact that overlays doesn't support rename() if source and target are not on the same layer, e.g. in containers built from several layers. Even though it's not atomic operation, it's better to try to copy files from src to dst on our own in this case. Next rebuild will probably not fail as the new directories will be on the same layer.
Reproducer:
$ cd selinux1
$ cat Dockerfile
FROM fedora:35
RUN dnf install -y selinux-policy selinux-policy-targeted$ podman build -t localhost/selinux . --no-cache
$ cd ../selinux2
$ cat Dockerfile
FROM localhost/selinux
RUN semodule -B $ podman build -t localhost/selinux2 . --no-cache
STEP 2/2: RUN semodule -B
libsemanage.semanage_commit_sandbox: Error while renaming /var/lib/selinux/targeted/active to /var/lib/selinux/targeted/previous. (Invalid cross-device link).
semodule: Failed!
Error: error building at STEP "RUN semodule -B": error while running runtime: exit status 1With the fix:
$ podman build -t localhost/selinux2 . --no-cache
STEP 2/2: RUN semodule -B
libsemanage.semanage_rename: Warning: rename(/var/lib/selinux/targeted/active, /var/lib/selinux/targeted/previous) failed: Invalid cross-device link, fall back to non-atomic semanage_copy_dir_flags() COMMIT localhost/selinux2
--> d2cfcebc1a1
Successfully tagged localhost/selinux2:latest
d2cfcebc1a1b34f1c2cd661ac18292b0612c3e5fa71d6fa1441be244da91b1af---
changes to v1 base on Ondrej's feedback:
- improve the commit message
- use WARN() instead of fprintf(stderr,
libsemanage/src/semanage_store.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-)
libsemanage/src/semanage_store.c +23 -6
@@ -697,6 +697,10 @@ int semanage_store_access_check(void)/********************* other I/O functions *********************/ +static int semanage_rename (semanage_handle_t * sh,const char *tmp,const char *dst); +int semanage_remove_directory (const char *path); +static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +/* Callback used by scandir() to select files. */ static int semanage_filename_select (const struct dirent *d) {
@@ -768,7 +772,20 @@ out:return retval; } -static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +static int semanage_rename (semanage_handle_t * sh,const char *src,const char *dst) { +int retval; + + retval =rename (src, dst); +if (retval ==0 || errno !=EXDEV ) +return retval; + +/* we can't use rename() due to filesystem limitation, lets try to copy files manually */ +WARN (sh,"Warning: rename(%s, %s) failed: %s, fall back to non-atomic semanage_copy_dir_flags()\n" , src, dst,strerror (errno)); +if (semanage_copy_dir_flags (src, dst,1 ) ==-1 ) { +return -1 ; + } +return semanage_remove_directory (src); +}/* Copies all of the files from src to dst, recursing into * subdirectories. Returns 0 on success, -1 on error. */
@@ -1770,7 +1787,7 @@ static int semanage_commit_sandbox(semanage_handle_t * sh) goto cleanup; } -if (rename (active, backup) ==-1 ) { +if (semanage_rename (sh, active, backup) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , active, backup); retval =-1 ; goto cleanup;
@@ -1779,12 +1796,12 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)/* clean up some files from the sandbox before install */ /* remove homedir_template from sandbox */ -if (rename (sandbox, active) ==-1 ) { +if (semanage_rename (sh, sandbox, active) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , sandbox, active);/* note that if an error occurs during the next * function then the store will be left in an * inconsistent state */ -if (rename (backup, active) <0 ) +if (semanage_rename (sh, backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active); retval =-1 ;
@@ -1795,10 +1812,10 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)* function then the store will be left in an * inconsistent state */ int errsv = errno; -if (rename (active, sandbox) <0 ) +if (semanage_rename (sh, active, sandbox) <0 )ERR (sh,"Error while renaming %s back to %s." , active, sandbox); -else if (rename (backup, active) <0 ) +else if (semanage_rename (sh, backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active);else
Signature · 1 line
2.35.1
PATCH v3 1/1 libsemanage: Fall back to semanage_copy_dir when rename() fails
In some circumstances, like semanage-store being on overlayfs, rename() could fail with EXDEV - Invalid cross-device link. This is due to the fact that overlays doesn't support rename() if source and target are not on the same layer, e.g. in containers built from several layers. Even though it's not atomic operation, it's better to try to copy files from src to dst on our own in this case. Next rebuild will probably not fail as the new directories will be on the same layer.
Reproducer:
$ cd selinux1
$ cat Dockerfile
FROM fedora:35
RUN dnf install -y selinux-policy selinux-policy-targeted$ podman build -t localhost/selinux . --no-cache
$ cd ../selinux2
$ cat Dockerfile
FROM localhost/selinux
RUN semodule -B $ podman build -t localhost/selinux2 . --no-cache
STEP 2/2: RUN semodule -B
libsemanage.semanage_commit_sandbox: Error while renaming /var/lib/selinux/targeted/active to /var/lib/selinux/targeted/previous. (Invalid cross-device link).
semodule: Failed!
Error: error building at STEP "RUN semodule -B": error while running runtime: exit status 1With the fix:
$ podman build -t localhost/selinux2 . --no-cache
STEP 2/2: RUN semodule -B
libsemanage.semanage_rename: Warning: rename(/var/lib/selinux/targeted/active, /var/lib/selinux/targeted/previous) failed: Invalid cross-device link, fall back to non-atomic semanage_copy_dir_flags() COMMIT localhost/selinux2
--> d2cfcebc1a1
Successfully tagged localhost/selinux2:latest
d2cfcebc1a1b34f1c2cd661ac18292b0612c3e5fa71d6fa1441be244da91b1af---
v2
- improve the commit message
- use WARN() instead of fprintf(stderr,
v3
- WARN without \n at the end
- split long line
libsemanage/src/semanage_store.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
libsemanage/src/semanage_store.c +24 -6
@@ -697,6 +697,10 @@ int semanage_store_access_check(void)/********************* other I/O functions *********************/ +static int semanage_rename (semanage_handle_t * sh,const char *tmp,const char *dst); +int semanage_remove_directory (const char *path); +static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +/* Callback used by scandir() to select files. */ static int semanage_filename_select (const struct dirent *d) {
@@ -768,7 +772,21 @@ out:return retval; } -static int semanage_copy_dir_flags (const char *src,const char *dst,int flag); +static int semanage_rename (semanage_handle_t * sh,const char *src,const char *dst) { +int retval; + + retval =rename (src, dst); +if (retval ==0 || errno !=EXDEV ) +return retval; + +/* we can't use rename() due to filesystem limitation, lets try to copy files manually */ +WARN (sh,"WARNING: rename(%s, %s) failed: %s, fall back to non-atomic semanage_copy_dir_flags()" , + src, dst,strerror (errno)); +if (semanage_copy_dir_flags (src, dst,1 ) ==-1 ) { +return -1 ; + } +return semanage_remove_directory (src); +}/* Copies all of the files from src to dst, recursing into * subdirectories. Returns 0 on success, -1 on error. */
@@ -1770,7 +1788,7 @@ static int semanage_commit_sandbox(semanage_handle_t * sh) goto cleanup; } -if (rename (active, backup) ==-1 ) { +if (semanage_rename (sh, active, backup) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , active, backup); retval =-1 ; goto cleanup;
@@ -1779,12 +1797,12 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)/* clean up some files from the sandbox before install */ /* remove homedir_template from sandbox */ -if (rename (sandbox, active) ==-1 ) { +if (semanage_rename (sh, sandbox, active) ==-1 ) {ERR (sh,"Error while renaming %s to %s." , sandbox, active);/* note that if an error occurs during the next * function then the store will be left in an * inconsistent state */ -if (rename (backup, active) <0 ) +if (semanage_rename (sh, backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active); retval =-1 ;
@@ -1795,10 +1813,10 @@ static int semanage_commit_sandbox(semanage_handle_t * sh)* function then the store will be left in an * inconsistent state */ int errsv = errno; -if (rename (active, sandbox) <0 ) +if (semanage_rename (sh, active, sandbox) <0 )ERR (sh,"Error while renaming %s back to %s." , active, sandbox); -else if (rename (backup, active) <0 ) +else if (semanage_rename (sh, backup, active) <0 )ERR (sh,"Error while renaming %s back to %s." , backup, active);else
Signature · 1 line
2.35.1
Re: [PATCH v3] libsemanage: Fall back to semanage_copy_dir when rename() fails
Quoted 47 lines · Petr Lautrbach
In some circumstances, like semanage-store being on overlayfs,
rename()could fail with EXDEV - Invalid cross-device link. This is due to the fact that overlays doesn't supportrename()if source and target are not on the same layer, e.g. in containers built from several layers. Even though it's not atomic operation, it's better to try to copy files from src to dst on our own in this case. Next rebuild will probably not fail as the new directories will be on the same layer.Reproducer:
$ cd selinux1$ cat Dockerfile FROM fedora:35 RUN dnf install -y selinux-policy selinux-policy-targeted$ podman build -t localhost/selinux . --no-cache$ cd ../selinux2$ cat Dockerfile FROM localhost/selinux RUN semodule -B$ podman build -t localhost/selinux2 . --no-cache STEP 2/2: RUN semodule -B libsemanage.semanage_commit_sandbox: Error while renaming /var/lib/selinux/targeted/active to /var/lib/selinux/targeted/previous. (Invalid cross-device link). semodule: Failed! Error: error building at STEP "RUN semodule -B": error while running runtime: exit status 1With the fix:
$ podman build -t localhost/selinux2 . --no-cache STEP 2/2: RUN semodule -B libsemanage.semanage_rename: Warning: rename(/var/lib/selinux/targeted/active, /var/lib/selinux/targeted/previous) failed: Invalid cross-device link, fall back to non-atomic semanage_copy_dir_flags()COMMIT localhost/selinux2 --> d2cfcebc1a1 Successfully tagged localhost/selinux2:latest d2cfcebc1a1b34f1c2cd661ac18292b0612c3e5fa71d6fa1441be244da91b1afReported-by Joseph Marrero Corchado <[email protected]>Signed-off-by Petr Lautrbach <[email protected]>---
Quoted 7 lines
v2
- improve the commit message
- useWARN()instead of fprintf(stderr,v3
- WARN without \n at the end
- split long line
Note that I didn't give the logic a thorough review, so I'd prefer someone else to give it a final look and merge it.
Signature · 3 lines
Ondrej Mosnacek Software Engineer, Linux Security - SELinux kernel Red Hat, Inc.
Re: [PATCH v3] libsemanage: Fall back to semanage_copy_dir when rename() fails
Quoted 52 lines · Ondrej Mosnacek
Quoted 51 lines · Petr Lautrbach
In some circumstances, like semanage-store being on overlayfs,
rename()could fail with EXDEV - Invalid cross-device link. This is due to the fact that overlays doesn't supportrename()if source and target are not on the same layer, e.g. in containers built from several layers. Even though it's not atomic operation, it's better to try to copy files from src to dst on our own in this case. Next rebuild will probably not fail as the new directories will be on the same layer.Reproducer:
$ cd selinux1$ cat Dockerfile FROM fedora:35 RUN dnf install -y selinux-policy selinux-policy-targeted$ podman build -t localhost/selinux . --no-cache$ cd ../selinux2$ cat Dockerfile FROM localhost/selinux RUN semodule -B$ podman build -t localhost/selinux2 . --no-cache STEP 2/2: RUN semodule -B libsemanage.semanage_commit_sandbox: Error while renaming /var/lib/selinux/targeted/active to /var/lib/selinux/targeted/previous. (Invalid cross-device link). semodule: Failed! Error: error building at STEP "RUN semodule -B": error while running runtime: exit status 1With the fix:
$ podman build -t localhost/selinux2 . --no-cache STEP 2/2: RUN semodule -B libsemanage.semanage_rename: Warning: rename(/var/lib/selinux/targeted/active, /var/lib/selinux/targeted/previous) failed: Invalid cross-device link, fall back to non-atomic semanage_copy_dir_flags()COMMIT localhost/selinux2 --> d2cfcebc1a1 Successfully tagged localhost/selinux2:latest d2cfcebc1a1b34f1c2cd661ac18292b0612c3e5fa71d6fa1441be244da91b1afReported-by Joseph Marrero Corchado <[email protected]>Signed-off-by Petr Lautrbach <[email protected]>---
v2
- improve the commit message
- useWARN()instead of fprintf(stderr,
Quoted 8 lines
Quoted 3 lines
v3
- WARN without \n at the end
- split long lineAcked-by Ondrej Mosnacek <[email protected]>Note that I didn't give the logic a thorough review, so I'd prefer someone else to give it a final look and merge it.
Merged.
Quoted 4 lines
Signature · 3 lines
Ondrej Mosnacek Software Engineer, Linux Security - SELinux kernel Red Hat, Inc.
PATCH v2 3/3 mcstrans: Fir RESOURCE_LEAK and USE_AFTER_FREE coverity scan defects
In reply to Petr Lautrbach--- mcstrans/src/mcstrans.c | 25 ++++++++++++++++++++++++- mcstrans/src/mcstransd.c | 4 +++- 2 files changed, 27 insertions(+), 2 deletions(-)
mcstrans/src/mcstrans.c +24 -1
@@ -632,16 +632,23 @@ add_cache(domain_t *domain, char *raw, char *trans) { map->raw =strdup (raw);if (!map->raw) { +free (map); goto err; } map->trans =strdup (trans);if (!map->trans) { +free (map->raw); +free (map); goto err; }log_debug (" add_cache (%s,%s)\n" , raw, trans); -if (add_to_hashtable (domain->raw_to_trans, map->raw, map) <0 ) +if (add_to_hashtable (domain->raw_to_trans, map->raw, map) <0 ) { +free (map->trans); +free (map->raw); +free (map); goto err; + }if (add_to_hashtable (domain->trans_to_raw, map->trans, map) <0 ) goto err;
@@ -1568,6 +1575,7 @@ trans_context(const char *incon, char **rcon) { trans =compute_trans_from_raw (range, domain);if (trans)if (add_cache (domain, range, trans) <0 ) { +free (trans);free (range);return -1 ; }
@@ -1579,6 +1587,7 @@ trans_context(const char *incon, char **rcon) { ltrans =compute_trans_from_raw (lrange, domain);if (ltrans) {if (add_cache (domain, lrange, ltrans) <0 ) { +free (ltrans);free (range);return -1 ; }
@@ -1597,6 +1606,7 @@ trans_context(const char *incon, char **rcon) { utrans =compute_trans_from_raw (urange, domain);if (utrans) {if (add_cache (domain, urange, utrans) <0 ) { +free (utrans);free (ltrans);free (range);return -1 ;
@@ -1636,6 +1646,10 @@ trans_context(const char *incon, char **rcon) { }if (dashp) *dashp ='-' ; +if (trans) { +free (trans); + trans =NULL ; + } }if (trans) {
@@ -1696,7 +1710,9 @@ untrans_context(const char *incon, char **rcon) { canonical =compute_trans_from_raw (raw, domain);if (canonical &&strcmp (canonical, range))if (add_cache (domain, raw, canonical) <0 ) { +free (canonical);free (range); +free (raw);return -1 ; } }
@@ -1704,6 +1720,7 @@ untrans_context(const char *incon, char **rcon) {free (canonical);if (add_cache (domain, raw, range) <0 ) {free (range); +free (raw);return -1 ; } }else {
@@ -1721,6 +1738,7 @@ untrans_context(const char *incon, char **rcon) { canonical =compute_trans_from_raw (lraw, domain);if (canonical)if (add_cache (domain, lraw, canonical) <0 ) { +free (canonical);free (lraw);free (range);return -1 ;
@@ -1752,6 +1770,7 @@ untrans_context(const char *incon, char **rcon) { canonical =compute_trans_from_raw (uraw, domain);if (canonical)if (add_cache (domain, uraw, canonical) <0 ) { +free (canonical);free (uraw);free (lraw);free (range);
@@ -1802,6 +1821,10 @@ untrans_context(const char *incon, char **rcon) { }if (dashp) *dashp ='-' ; +if (raw) { +free (raw); + raw =NULL ; + } }if (raw) {
mcstrans/src/mcstransd.c +3 -1
@@ -328,6 +328,7 @@ process_events(struct pollfd **ufds, int *nfds)/* Setup pollfd for deletion later. */ (*ufds)[ii].fd =-1 ;close (connfd); + connfd =-1 ;/* So we don't get bothered later */ revents = revents & ~(POLLHUP ); }
@@ -341,10 +342,11 @@ process_events(struct pollfd **ufds, int *nfds)/* Set the pollfd up for deletion later. */ (*ufds)[ii].fd =-1 ;close (connfd); + connfd =-1 ; revents = revents & ~(POLLHUP ); } -if (revents) { +if (revents && connfd !=-1 ) {syslog (LOG_ERR ,"Unknown/error events (%x) encountered" " for fd (%d)\n" , revents, connfd);
Signature · 1 line
2.35.1