perf/x86/amd: Add AMD Fam19h Branch Sampling support
Subsystems (3)
v7 cover perf/x86/amd: Add AMD Fam19h Branch Sampling support
Add support for the AMD Fam19h 16-deep branch sampling feature as described in the AMD PPR Fam19h Model 01h Revision B1 section 2.1.13. This is a model specific extension. It is not an architected AMD feature.
The Branch Sampling Feature (BRS) provides the statistical taken branch information necessary to enable autoFDO-style optimization by compilers, i.e., basic block execution counts.
BRS operates with a 16-deep saturating buffer in MSR registers. There is no hardware branch type filtering. All control flow changes are captured. BRS relies on specific programming of the core PMU of Fam19h. In particular, the following requirements must be met:
- the sampling period be greater than 16 (BRS depth)
- the sampling period must use fixed and not frequency mode
BRS interacts with the NMI interrupt as well. Because enabling BRS is expensive, it is only activated after P event occurrences, where P is the desired sampling period. At P occurrences of the event, the counter overflows, the CPU catches the NMI interrupt, activates BRS for 16 branches until it saturates, and then delivers the NMI to the kernel. Between the overflow and the time BRS activates more branches may be executed skewing the period. All along, the sampling event keeps counting. The skid may be attenuated by reducing the sampling period by 16.
BRS is integrated into perf_events seamlessly via the same PERF_RECORD_BRANCH_STACK sample format. BRS generates branch perf_branch_entry records in the sampling buffer. There is no prediction or latency information supported. The branches are stored in reverse order of execution. The most recent branch is the first entry in each record.
Because BRS must be stopped when a CPU goes into low power mode, the series includes patches to add callbacks on ACPI low power entry and exit which is used on AMD processors.
Given that there is no privilege filterting with BRS, the kernel implements filtering on privlege level.
This version adds a few simple modifications to perf record and report.
1. add the branch-brs event as a builtin such as it can used directly:
perf record -e branch-brs ...
2. improve error handling for AMD IBS and is contributed by Kim Phillips.
3. use the better error handling to improve error handling for BRS.
4. add two new sort dimensions to help display the branch sampling information. Because there is no latency information associated with the branch sampling feature perf report would collapse all samples within a function into a single histogram entry. This is expected because the default sort mode for PERF_SAMPLE_BRANCH_STACK is symbol_from/symbol_to. This propagates to the annotation.
For more detailed view of the branch samples, the new sort dimensions addr_from,addr_to can be used instead as follows:
$ perf report --sort=overhead,comm,dso,addr_from,addr_to
# Overhead Command Shared Object Source Address Target Address
# ........ .......... .............. .............. ..............
#
4.21% test_prg test_prg [.] test_threa+0x3c [.] test_threa+0x4
4.14% test_prg test_prg [.] test_threa+0x3e [.] test_threa+0x2
4.10% test_prg test_prg [.] test_threa+0x4 [.] test_threa+0x3a
4.07% test_prg test_prg [.] test_threa+0x2 [.] test_threa+0x3cVersus the default output:
$ perf report
# Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles
# ........ ......... .................... ................ ................. ..................
#
99.52% test_prg test_prg [.] test_thread [.] test_thread - BRS can be used with any sampling event. However, it is recommended to use the RETIRED_BRANCH event because it matches what the BRS captures. For convenience, a pseudo event matching the branches captured by BRS is exported by the kernel (branch-brs):
$ perf record -b -e cpu/branch-brs/ -c 1000037 test
$ perf report -D 56531696056126 0x193c000 [0x1a8]: PERF_RECORD_SAMPLE(IP, 0x2): 18122/18230: 0x401d24 period: 1000037 addr: 0 ... branch stack: nr:16 ..... 0: 0000000000401d24 -> 0000000000401d5a 0 cycles 0 ..... 1: 0000000000401d5c -> 0000000000401d24 0 cycles 0 ..... 2: 0000000000401d22 -> 0000000000401d5c 0 cycles 0 ..... 3: 0000000000401d5e -> 0000000000401d22 0 cycles 0 ..... 4: 0000000000401d20 -> 0000000000401d5e 0 cycles 0 ..... 5: 0000000000401d3e -> 0000000000401d20 0 cycles 0 ..... 6: 0000000000401d42 -> 0000000000401d3e 0 cycles 0 ..... 7: 0000000000401d3c -> 0000000000401d42 0 cycles 0 ..... 8: 0000000000401d44 -> 0000000000401d3c 0 cycles 0 ..... 9: 0000000000401d3a -> 0000000000401d44 0 cycles 0 ..... 10: 0000000000401d46 -> 0000000000401d3a 0 cycles 0 ..... 11: 0000000000401d38 -> 0000000000401d46 0 cycles 0 ..... 12: 0000000000401d48 -> 0000000000401d38 0 cycles 0 ..... 13: 0000000000401d36 -> 0000000000401d48 0 cycles 0 ..... 14: 0000000000401d4a -> 0000000000401d36 0 cycles 0 ..... 15: 0000000000401d34 -> 0000000000401d4a 0 cycles 0 ... thread: test:18230 ...... dso: test
Special thanks to Kim Phillips @ AMD for the testing, reviews and contributions.
V2 makes the following changes:
- the low power callback code has be reworked completly. It is not impacting the generic perf_events code anymore. This is all handled via x86 code and only for ACPI low power driver which seems to be the default on AMD. The change in acpi_pad.c and processor_idle.c has no impact on non x86 architectures, on Intel x86 or AMD without BRS, a jump label is used to void the code unless necessary
- BRS is an opt-in compile time option for the kernel
- branch_stack bit clearing helper is introduced
- As for the fact that BRS holds the NMI and that it may conflict with other sampling events and introduced skid, this is not really a problem because AMD PMI skid is already very large prompting special handling in amd_pmu_wait_on_overflow(), so adding a few cycles while the CPU executes at most 16 taken branches is not a problem.
V3 makes the following changes:
- simplifies the handling of BRS enable/disable to mimic the Intel LBR code path more closely. That removes some callbacks in generic x86 code
- add config option to compile BRS as an opt-in (off by default)
- updated perf tool error reporting patch updates by Kim Phillips
V4 makes the following changes:
- rebase to latest tip.git (commit 6f5ac142e5df)
- integrate Kim Phillips latest perf tool error handling patches
V5 makes the following changes:
- rebased to 5.17-rc1
- integrated feedback from PeterZ about AMD perf_events callbacks
- fix cpufeature macros name X86_FEATURE_BRS
- integrated all perf tool error handling from kim Phillips
V6 makes the following changes:
- rebase to 5.17-rc3
- fix the typo in the Kconfig for BRS opt-in
- reword all changelogs to be more aligned with standard
V7 makes the following changes:
- rebased to 5.17-rc8
- Restrict BRS to be used only with RETIRED_TAKEN_BRANCH event in order to avoid adding more skid to other events in case that are monitored concurrently
- fixed bugs in the perf tool enhanced error handling for IBS and BRS
Kim Phillips (1):
perf tools: Improve IBS error handling
Stephane Eranian (12):
perf/core: add perf_clear_branch_entry_bitfields() helper x86/cpufeatures: add AMD Fam19h Branch Sampling feature perf/x86/amd: add AMD Fam19h Branch Sampling support perf/x86/amd: add branch-brs helper event for Fam19h BRS perf/x86/amd: enable branch sampling priv level filtering perf/x86/amd: add AMD branch sampling period adjustment perf/x86/amd: make Zen3 branch sampling opt-in
ACPI: add perf low power callback
perf/x86/amd: add idle hooks for branch sampling perf tools: fix NULL point in evsel__env()
perf tools: Improve error handling of AMD Branch Sampling perf report: add addr_from/addr_to sort dimensions
arch/x86/events/Kconfig | 8 + arch/x86/events/amd/Makefile | 1 + arch/x86/events/amd/brs.c | 363 +++++++++++++++++++++++++++++ arch/x86/events/amd/core.c | 252 +++++++++++++++++++- arch/x86/events/core.c | 17 +- arch/x86/events/intel/lbr.c | 36 ++- arch/x86/events/perf_event.h | 143 ++++++++++-- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/msr-index.h | 4 + arch/x86/include/asm/perf_event.h | 21 ++ drivers/acpi/acpi_pad.c | 6 + drivers/acpi/processor_idle.c | 5 + include/linux/perf_event.h | 22 ++ tools/perf/util/evsel.c | 48 +++- tools/perf/util/hist.c | 2 + tools/perf/util/hist.h | 2 + tools/perf/util/sort.c | 128 ++++++++++ tools/perf/util/sort.h | 2 + 18 files changed, 1020 insertions(+), 41 deletions(-) create mode 100644 arch/x86/events/amd/brs.c
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
PATCH v7 1/13 perf/core: add perf_clear_branch_entry_bitfields() helper
Make it simpler to reset all the info fields on the perf_branch_entry by adding a helper inline function.
The goal is to centralize the initialization to avoid missing a field in case more are added.
--- arch/x86/events/intel/lbr.c | 36 +++++++++++++++++------------------- include/linux/perf_event.h | 16 ++++++++++++++++ 2 files changed, 33 insertions(+), 19 deletions(-)
arch/x86/events/intel/lbr.c +17 -19
@@ -769,6 +769,7 @@ void intel_pmu_lbr_disable_all(void)void intel_pmu_lbr_read_32 (struct cpu_hw_events *cpuc) {unsigned long mask = x86_pmu.lbr_nr -1 ; +struct perf_branch_entry *br = cpuc->lbr_entries;u64 tos =intel_pmu_lbr_tos ();int i;
@@ -784,15 +785,11 @@ void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)rdmsrl (x86_pmu.lbr_from + lbr_idx, msr_lastbranch.lbr); - cpuc->lbr_entries[i].from = msr_lastbranch.from; - cpuc->lbr_entries[i].to = msr_lastbranch.to; - cpuc->lbr_entries[i].mispred =0 ; - cpuc->lbr_entries[i].predicted =0 ; - cpuc->lbr_entries[i].in_tx =0 ; - cpuc->lbr_entries[i].abort =0 ; - cpuc->lbr_entries[i].cycles =0 ; - cpuc->lbr_entries[i].type =0 ; - cpuc->lbr_entries[i].reserved =0 ; +perf_clear_branch_entry_bitfields (br); + + br->from = msr_lastbranch.from; + br->to = msr_lastbranch.to; + br++; } cpuc->lbr_stack.nr = i; cpuc->lbr_stack.hw_idx = tos;
@@ -807,6 +804,7 @@ void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc) {bool need_info = false, call_stack = false;unsigned long mask = x86_pmu.lbr_nr -1 ; +struct perf_branch_entry *br = cpuc->lbr_entries;u64 tos =intel_pmu_lbr_tos ();int i;int out =0 ;
@@ -878,15 +876,14 @@ void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)if (abort && x86_pmu.lbr_double_abort && out >0 ) out--; - cpuc->lbr_entries[out].from = from; - cpuc->lbr_entries[out].to = to; - cpuc->lbr_entries[out].mispred = mis; - cpuc->lbr_entries[out].predicted = pred; - cpuc->lbr_entries[out].in_tx = in_tx; - cpuc->lbr_entries[out].abort = abort; - cpuc->lbr_entries[out].cycles = cycles; - cpuc->lbr_entries[out].type =0 ; - cpuc->lbr_entries[out].reserved =0 ; +perf_clear_branch_entry_bitfields (br+out); + br[out].from = from; + br[out].to = to; + br[out].mispred = mis; + br[out].predicted = pred; + br[out].in_tx = in_tx; + br[out].abort = abort; + br[out].cycles = cycles; out++; } cpuc->lbr_stack.nr = out;
@@ -951,6 +948,8 @@ static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc, to =rdlbr_to (i, lbr); info =rdlbr_info (i, lbr); +perf_clear_branch_entry_bitfields (e); + e->from = from; e->to = to; e->mispred =get_lbr_mispred (info);
@@ -959,7 +958,6 @@ static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc, e->abort = !!(info &LBR_INFO_ABORT ); e->cycles =get_lbr_cycles (info); e->type =get_lbr_br_type (info); - e->reserved =0 ; } cpuc->lbr_stack.nr = i;
include/linux/perf_event.h +16 -0
@@ -1063,6 +1063,22 @@ static inline void perf_sample_data_init(struct perf_sample_data *data, data->txn =0 ; } +/* +* Clear all bitfields in the perf_branch_entry. +* The to and from fields are not cleared because they are +* systematically modified by caller. +*/ +static inline void perf_clear_branch_entry_bitfields (struct perf_branch_entry *br) +{ + br->mispred =0 ; + br->predicted =0 ; + br->in_tx =0 ; + br->abort =0 ; + br->cycles =0 ; + br->type =0 ; + br->reserved =0 ; +} + extern void perf_output_sample(struct perf_output_handle *handle, struct perf_event_header *header, struct perf_sample_data *data,
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] perf/core: Add perf_clear_branch_entry_bitfields() helper
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: bfe4daf850f45d92dcd3da477f0b0456620294c3 Gitweb: https://git.kernel.org/tip/bfe4daf850f45d92dcd3da477f0b0456620294c3 Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:05 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:36 +02:00
perf/core: Add perf_clear_branch_entry_bitfields() helper
Make it simpler to reset all the info fields on the perf_branch_entry by adding a helper inline function.
The goal is to centralize the initialization to avoid missing a field in case more are added.
--- arch/x86/events/intel/lbr.c | 36 +++++++++++++++++------------------- include/linux/perf_event.h | 16 ++++++++++++++++- 2 files changed, 33 insertions(+), 19 deletions(-)
arch/x86/events/intel/lbr.c +17 -19
@@ -769,6 +769,7 @@ void intel_pmu_lbr_disable_all(void)void intel_pmu_lbr_read_32 (struct cpu_hw_events *cpuc) {unsigned long mask = x86_pmu.lbr_nr -1 ; +struct perf_branch_entry *br = cpuc->lbr_entries;u64 tos =intel_pmu_lbr_tos ();int i;
@@ -784,15 +785,11 @@ void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)rdmsrl (x86_pmu.lbr_from + lbr_idx, msr_lastbranch.lbr); - cpuc->lbr_entries[i].from = msr_lastbranch.from; - cpuc->lbr_entries[i].to = msr_lastbranch.to; - cpuc->lbr_entries[i].mispred =0 ; - cpuc->lbr_entries[i].predicted =0 ; - cpuc->lbr_entries[i].in_tx =0 ; - cpuc->lbr_entries[i].abort =0 ; - cpuc->lbr_entries[i].cycles =0 ; - cpuc->lbr_entries[i].type =0 ; - cpuc->lbr_entries[i].reserved =0 ; +perf_clear_branch_entry_bitfields (br); + + br->from = msr_lastbranch.from; + br->to = msr_lastbranch.to; + br++; } cpuc->lbr_stack.nr = i; cpuc->lbr_stack.hw_idx = tos;
@@ -807,6 +804,7 @@ void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc) {bool need_info = false, call_stack = false;unsigned long mask = x86_pmu.lbr_nr -1 ; +struct perf_branch_entry *br = cpuc->lbr_entries;u64 tos =intel_pmu_lbr_tos ();int i;int out =0 ;
@@ -878,15 +876,14 @@ void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)if (abort && x86_pmu.lbr_double_abort && out >0 ) out--; - cpuc->lbr_entries[out].from = from; - cpuc->lbr_entries[out].to = to; - cpuc->lbr_entries[out].mispred = mis; - cpuc->lbr_entries[out].predicted = pred; - cpuc->lbr_entries[out].in_tx = in_tx; - cpuc->lbr_entries[out].abort = abort; - cpuc->lbr_entries[out].cycles = cycles; - cpuc->lbr_entries[out].type =0 ; - cpuc->lbr_entries[out].reserved =0 ; +perf_clear_branch_entry_bitfields (br+out); + br[out].from = from; + br[out].to = to; + br[out].mispred = mis; + br[out].predicted = pred; + br[out].in_tx = in_tx; + br[out].abort = abort; + br[out].cycles = cycles; out++; } cpuc->lbr_stack.nr = out;
@@ -951,6 +948,8 @@ static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc, to =rdlbr_to (i, lbr); info =rdlbr_info (i, lbr); +perf_clear_branch_entry_bitfields (e); + e->from = from; e->to = to; e->mispred =get_lbr_mispred (info);
@@ -959,7 +958,6 @@ static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc, e->abort = !!(info &LBR_INFO_ABORT ); e->cycles =get_lbr_cycles (info); e->type =get_lbr_br_type (info); - e->reserved =0 ; } cpuc->lbr_stack.nr = i;
include/linux/perf_event.h +16 -0
@@ -1063,6 +1063,22 @@ static inline void perf_sample_data_init(struct perf_sample_data *data, data->txn =0 ; } +/* +* Clear all bitfields in the perf_branch_entry. +* The to and from fields are not cleared because they are +* systematically modified by caller. +*/ +static inline void perf_clear_branch_entry_bitfields (struct perf_branch_entry *br) +{ + br->mispred =0 ; + br->predicted =0 ; + br->in_tx =0 ; + br->abort =0 ; + br->cycles =0 ; + br->type =0 ; + br->reserved =0 ; +} + extern void perf_output_sample(struct perf_output_handle *handle, struct perf_event_header *header, struct perf_sample_data *data,
PATCH v7 2/13 x86/cpufeatures: add AMD Fam19h Branch Sampling feature
In reply to Stephane EranianAdd a cpu feature for AMD Fam19h Branch Sampling feature as bit 31 of EBX on CPUID leaf function 0x80000008.
--- arch/x86/include/asm/cpufeatures.h | 1 + 1 file changed, 1 insertion(+)
arch/x86/include/asm/cpufeatures.h +1 -0
@@ -315,6 +315,7 @@#define X86_FEATURE_VIRT_SSBD (13*32+25)/* Virtualized Speculative Store Bypass Disable */ #define X86_FEATURE_AMD_SSB_NO (13*32+26)/* "" Speculative Store Bypass is fixed in hardware. */ #define X86_FEATURE_CPPC (13*32+27)/* Collaborative Processor Performance Control */ +#define X86_FEATURE_BRS (13*32+31)/* Branch Sampling available */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0)/* Digital Thermal Sensor */
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] x86/cpufeatures: Add AMD Fam19h Branch Sampling feature
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: a77d41ac3a0f41c80120ec5b8b08ab284fec950a Gitweb: https://git.kernel.org/tip/a77d41ac3a0f41c80120ec5b8b08ab284fec950a Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:06 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:36 +02:00
x86/cpufeatures: Add AMD Fam19h Branch Sampling feature
Add a cpu feature for AMD Fam19h Branch Sampling feature as bit 31 of EBX on CPUID leaf function 0x80000008.
--- arch/x86/include/asm/cpufeatures.h | 1 + 1 file changed, 1 insertion(+)
arch/x86/include/asm/cpufeatures.h +1 -0
@@ -315,6 +315,7 @@#define X86_FEATURE_VIRT_SSBD (13*32+25)/* Virtualized Speculative Store Bypass Disable */ #define X86_FEATURE_AMD_SSB_NO (13*32+26)/* "" Speculative Store Bypass is fixed in hardware. */ #define X86_FEATURE_CPPC (13*32+27)/* Collaborative Processor Performance Control */ +#define X86_FEATURE_BRS (13*32+31)/* Branch Sampling available */ /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */ #define X86_FEATURE_DTHERM (14*32+ 0)/* Digital Thermal Sensor */
PATCH v7 3/13 perf/x86/amd: add AMD Fam19h Branch Sampling support
In reply to Stephane EranianAdd support for the AMD Fam19h 16-deep branch sampling feature as described in the AMD PPR Fam19h Model 01h Revision B1. This is a model specific extension. It is not an architected AMD feature.
The Branch Sampling (BRS) operates with a 16-deep saturating buffer in MSR registers. There is no branch type filtering. All control flow changes are captured. BRS relies on specific programming of the core PMU of Fam19h. In particular, the following requirements must be met:
- the sampling period be greater than 16 (BRS depth)
- the sampling period must use a fixed and not frequency mode
BRS interacts with the NMI interrupt as well. Because enabling BRS is expensive, it is only activated after P event occurrences, where P is the desired sampling period. At P occurrences of the event, the counter overflows, the CPU catches the interrupt, activates BRS for 16 branches until it saturates, and then delivers the NMI to the kernel. Between the overflow and the time BRS activates more branches may be executed skewing the period. All along, the sampling event keeps counting. The skid may be attenuated by reducing the sampling period by 16 (subsequent patch).
BRS is integrated into perf_events seamlessly via the same PERF_RECORD_BRANCH_STACK sample format. BRS generates perf_branch_entry records in the sampling buffer. No prediction information is supported. The branches are stored in reverse order of execution. The most recent branch is the first entry in each record.
No modification to the perf tool is necessary.
BRS can be used with any sampling event. However, it is recommended to use the RETIRED_BRANCH_INSTRUCTIONS event because it matches what the BRS captures.
$ perf record -b -c 1000037 -e cpu/event=0xc2,name=ret_br_instructions/ test
$ perf report -D 56531696056126 0x193c000 [0x1a8]: PERF_RECORD_SAMPLE(IP, 0x2): 18122/18230: 0x401d24 period: 1000037 addr: 0 ... branch stack: nr:16 ..... 0: 0000000000401d24 -> 0000000000401d5a 0 cycles 0 ..... 1: 0000000000401d5c -> 0000000000401d24 0 cycles 0 ..... 2: 0000000000401d22 -> 0000000000401d5c 0 cycles 0 ..... 3: 0000000000401d5e -> 0000000000401d22 0 cycles 0 ..... 4: 0000000000401d20 -> 0000000000401d5e 0 cycles 0 ..... 5: 0000000000401d3e -> 0000000000401d20 0 cycles 0 ..... 6: 0000000000401d42 -> 0000000000401d3e 0 cycles 0 ..... 7: 0000000000401d3c -> 0000000000401d42 0 cycles 0 ..... 8: 0000000000401d44 -> 0000000000401d3c 0 cycles 0 ..... 9: 0000000000401d3a -> 0000000000401d44 0 cycles 0 ..... 10: 0000000000401d46 -> 0000000000401d3a 0 cycles 0 ..... 11: 0000000000401d38 -> 0000000000401d46 0 cycles 0 ..... 12: 0000000000401d48 -> 0000000000401d38 0 cycles 0 ..... 13: 0000000000401d36 -> 0000000000401d48 0 cycles 0 ..... 14: 0000000000401d4a -> 0000000000401d36 0 cycles 0 ..... 15: 0000000000401d34 -> 0000000000401d4a 0 cycles 0 ... thread: test:18230 ...... dso: test
--- arch/x86/events/amd/Makefile | 2 +- arch/x86/events/amd/brs.c | 317 +++++++++++++++++++++++++++++++ arch/x86/events/amd/core.c | 233 ++++++++++++++++++++++- arch/x86/events/core.c | 10 +- arch/x86/events/perf_event.h | 101 ++++++++-- arch/x86/include/asm/msr-index.h | 4 + 6 files changed, 645 insertions(+), 22 deletions(-) create mode 100644 arch/x86/events/amd/brs.c
arch/x86/events/amd/Makefile +1 -1
@@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CPU_SUP_AMD) += core.o +obj-$(CONFIG_CPU_SUP_AMD) += core.o brs.o obj-$(CONFIG_PERF_EVENTS_AMD_POWER) += power.o obj-$(CONFIG_X86_LOCAL_APIC) += ibs.o obj-$(CONFIG_PERF_EVENTS_AMD_UNCORE) += amd-uncore.o
arch/x86/events/amd/brs.c new file +317 -0
317 lines not on this page · raw message
arch/x86/events/amd/core.c +229 -4
322 lines not on this page · raw message
arch/x86/events/core.c +9 -1
@@ -1338,6 +1338,10 @@ static void x86_pmu_enable(struct pmu *pmu)if (hwc->state &PERF_HES_ARCH )continue ; +/* +* if cpuc->enabled = 0, then no wrmsr as +* per x86_pmu_enable_event() +*/ x86_pmu_start (event,PERF_EF_RELOAD ); } cpuc->n_added =0 ;
@@ -1704,11 +1708,15 @@ int x86_pmu_handle_irq(struct pt_regs *regs)* event overflow */ handled++; -perf_sample_data_init (&data,0 , event->hw.last_period);if (!x86_perf_event_set_period (event))continue ; +perf_sample_data_init (&data,0 , event->hw.last_period); + +if (has_branch_stack (event)) + data.br_stack = &cpuc->lbr_stack; +if (perf_event_overflow (event, &data, regs))x86_pmu_stop (event,0 ); }
arch/x86/events/perf_event.h +85 -16
131 lines not on this page · raw message
arch/x86/include/asm/msr-index.h +4 -0
@@ -688,6 +688,10 @@#define MSR_IA32_PERF_CTL 0x00000199#define INTEL_PERF_CTL_MASK 0xffff +/* AMD Branch Sampling configuration */ +#define MSR_AMD_DBG_EXTN_CFG 0xc000010f +#define MSR_AMD_SAMP_BR_FROM 0xc0010300 +#define MSR_IA32_MPERF 0x000000e7#define MSR_IA32_APERF 0x000000e8
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: ada543459cab7f653dcacdaba4011a8bb19c627c Gitweb: https://git.kernel.org/tip/ada543459cab7f653dcacdaba4011a8bb19c627c Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:07 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:37 +02:00
perf/x86/amd: Add AMD Fam19h Branch Sampling support
Add support for the AMD Fam19h 16-deep branch sampling feature as described in the AMD PPR Fam19h Model 01h Revision B1. This is a model specific extension. It is not an architected AMD feature.
The Branch Sampling (BRS) operates with a 16-deep saturating buffer in MSR registers. There is no branch type filtering. All control flow changes are captured. BRS relies on specific programming of the core PMU of Fam19h. In particular, the following requirements must be met:
- the sampling period be greater than 16 (BRS depth)
- the sampling period must use a fixed and not frequency mode
BRS interacts with the NMI interrupt as well. Because enabling BRS is expensive, it is only activated after P event occurrences, where P is the desired sampling period. At P occurrences of the event, the counter overflows, the CPU catches the interrupt, activates BRS for 16 branches until it saturates, and then delivers the NMI to the kernel. Between the overflow and the time BRS activates more branches may be executed skewing the period. All along, the sampling event keeps counting. The skid may be attenuated by reducing the sampling period by 16 (subsequent patch).
BRS is integrated into perf_events seamlessly via the same PERF_RECORD_BRANCH_STACK sample format. BRS generates perf_branch_entry records in the sampling buffer. No prediction information is supported. The branches are stored in reverse order of execution. The most recent branch is the first entry in each record.
No modification to the perf tool is necessary.
BRS can be used with any sampling event. However, it is recommended to use the RETIRED_BRANCH_INSTRUCTIONS event because it matches what the BRS captures.
$ perf record -b -c 1000037 -e cpu/event=0xc2,name=ret_br_instructions/ test
$ perf report -D 56531696056126 0x193c000 [0x1a8]: PERF_RECORD_SAMPLE(IP, 0x2): 18122/18230: 0x401d24 period: 1000037 addr: 0 ... branch stack: nr:16 ..... 0: 0000000000401d24 -> 0000000000401d5a 0 cycles 0 ..... 1: 0000000000401d5c -> 0000000000401d24 0 cycles 0 ..... 2: 0000000000401d22 -> 0000000000401d5c 0 cycles 0 ..... 3: 0000000000401d5e -> 0000000000401d22 0 cycles 0 ..... 4: 0000000000401d20 -> 0000000000401d5e 0 cycles 0 ..... 5: 0000000000401d3e -> 0000000000401d20 0 cycles 0 ..... 6: 0000000000401d42 -> 0000000000401d3e 0 cycles 0 ..... 7: 0000000000401d3c -> 0000000000401d42 0 cycles 0 ..... 8: 0000000000401d44 -> 0000000000401d3c 0 cycles 0 ..... 9: 0000000000401d3a -> 0000000000401d44 0 cycles 0 ..... 10: 0000000000401d46 -> 0000000000401d3a 0 cycles 0 ..... 11: 0000000000401d38 -> 0000000000401d46 0 cycles 0 ..... 12: 0000000000401d48 -> 0000000000401d38 0 cycles 0 ..... 13: 0000000000401d36 -> 0000000000401d48 0 cycles 0 ..... 14: 0000000000401d4a -> 0000000000401d36 0 cycles 0 ..... 15: 0000000000401d34 -> 0000000000401d4a 0 cycles 0 ... thread: test:18230 ...... dso: test
--- arch/x86/events/amd/Makefile | 2 +- arch/x86/events/amd/brs.c | 317 ++++++++++++++++++++++++++++++- arch/x86/events/amd/core.c | 233 +++++++++++++++++++++- arch/x86/events/core.c | 10 +- arch/x86/events/perf_event.h | 101 ++++++++-- arch/x86/include/asm/msr-index.h | 4 +- 6 files changed, 645 insertions(+), 22 deletions(-) create mode 100644 arch/x86/events/amd/brs.c
arch/x86/events/amd/Makefile +1 -1
@@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CPU_SUP_AMD) += core.o +obj-$(CONFIG_CPU_SUP_AMD) += core.o brs.o obj-$(CONFIG_PERF_EVENTS_AMD_POWER) += power.o obj-$(CONFIG_X86_LOCAL_APIC) += ibs.o obj-$(CONFIG_PERF_EVENTS_AMD_UNCORE) += amd-uncore.o
arch/x86/events/amd/brs.c new file +317 -0
317 lines not on this page · raw message
arch/x86/events/amd/core.c +229 -4
322 lines not on this page · raw message
arch/x86/events/core.c +9 -1
@@ -1338,6 +1338,10 @@ static void x86_pmu_enable(struct pmu *pmu)if (hwc->state &PERF_HES_ARCH )continue ; +/* +* if cpuc->enabled = 0, then no wrmsr as +* per x86_pmu_enable_event() +*/ x86_pmu_start (event,PERF_EF_RELOAD ); } cpuc->n_added =0 ;
@@ -1704,11 +1708,15 @@ int x86_pmu_handle_irq(struct pt_regs *regs)* event overflow */ handled++; -perf_sample_data_init (&data,0 , event->hw.last_period);if (!x86_perf_event_set_period (event))continue ; +perf_sample_data_init (&data,0 , event->hw.last_period); + +if (has_branch_stack (event)) + data.br_stack = &cpuc->lbr_stack; +if (perf_event_overflow (event, &data, regs))x86_pmu_stop (event,0 ); }
arch/x86/events/perf_event.h +85 -16
131 lines not on this page · raw message
arch/x86/include/asm/msr-index.h +4 -0
@@ -688,6 +688,10 @@#define MSR_IA32_PERF_CTL 0x00000199#define INTEL_PERF_CTL_MASK 0xffff +/* AMD Branch Sampling configuration */ +#define MSR_AMD_DBG_EXTN_CFG 0xc000010f +#define MSR_AMD_SAMP_BR_FROM 0xc0010300 +#define MSR_IA32_MPERF 0x000000e7#define MSR_IA32_APERF 0x000000e8
PATCH v7 4/13 perf/x86/amd: add branch-brs helper event for Fam19h BRS
In reply to Stephane EranianAdd a pseudo event called branch-brs to help use the FAM Fam19h Branch Sampling feature (BRS). BRS samples taken branches, so it is best used when sampling on a retired taken branch event (0xc4) which is what BRS captures. Instead of trying to remember the event code or actual event name, users can simply do:
$ perf record -b -e cpu/branch-brs/ -c 1000037 .....
--- arch/x86/events/amd/core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/x86/events/amd/core.c +15 -0
@@ -1145,8 +1145,23 @@ static struct attribute_group group_caps_amd_brs = { .is_visible = amd_brs_is_visible, }; +EVENT_ATTR_STR (branch-brs, amd_branch_brs, + "event=" __stringify(AMD_FAM19H_BRS_EVENT)"\n"); + +static struct attribute *amd_brs_events_attrs[] = { +EVENT_PTR (amd_branch_brs), +NULL , +}; + +static struct attribute_group group_events_amd_brs = { + .name ="events" , + .attrs = amd_brs_events_attrs, + .is_visible = amd_brs_is_visible, +}; +static const struct attribute_group *amd_attr_update[] = { &group_caps_amd_brs, + &group_events_amd_brs,NULL , };
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] perf/x86/amd: Add branch-brs helper event for Fam19h BRS
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: 44175993efbae04e8b2d7f7795ff512c3a726db0 Gitweb: https://git.kernel.org/tip/44175993efbae04e8b2d7f7795ff512c3a726db0 Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:08 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:37 +02:00
perf/x86/amd: Add branch-brs helper event for Fam19h BRS
Add a pseudo event called branch-brs to help use the FAM Fam19h Branch Sampling feature (BRS). BRS samples taken branches, so it is best used when sampling on a retired taken branch event (0xc4) which is what BRS captures. Instead of trying to remember the event code or actual event name, users can simply do:
$ perf record -b -e cpu/branch-brs/ -c 1000037 .....
--- arch/x86/events/amd/core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/x86/events/amd/core.c +15 -0
@@ -1145,8 +1145,23 @@ static struct attribute_group group_caps_amd_brs = { .is_visible = amd_brs_is_visible, }; +EVENT_ATTR_STR (branch-brs, amd_branch_brs, + "event=" __stringify(AMD_FAM19H_BRS_EVENT)"\n"); + +static struct attribute *amd_brs_events_attrs[] = { +EVENT_PTR (amd_branch_brs), +NULL , +}; + +static struct attribute_group group_events_amd_brs = { + .name ="events" , + .attrs = amd_brs_events_attrs, + .is_visible = amd_brs_is_visible, +}; +static const struct attribute_group *amd_attr_update[] = { &group_caps_amd_brs, + &group_events_amd_brs,NULL , };
PATCH v7 5/13 perf/x86/amd: enable branch sampling priv level filtering
In reply to Stephane EranianThe AMD Branch Sampling features does not provide hardware filtering by privilege level. The associated PMU counter does but not the branch sampling by itself. Given how BRS operates there is a possibility that BRS captures kernel level branches even though the event is programmed to count only at the user level.
Implement a workaround in software by removing the branches which belong to the wrong privilege level. The privilege level is evaluated on the target of the branch and not the source so as to be compatible with other architectures. As a consequence of this patch, the number of entries in the PERF_RECORD_BRANCH_STACK buffer may be less than the maximum (16). It could even be zero. Another consequence is that consecutive entries in the branch stack may not reflect actual code path and may have discontinuities, in case kernel branches were suppressed. But this is no different than what happens on other architectures.
--- arch/x86/events/amd/brs.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)
arch/x86/events/amd/brs.c +20 -6
@@ -92,10 +92,6 @@ int amd_brs_setup_filter(struct perf_event *event)if ((type & ~PERF_SAMPLE_BRANCH_PLM_ALL ) !=PERF_SAMPLE_BRANCH_ANY )return -EINVAL ; -/* can only capture at all priv levels due to the way BRS works */ -if ((type &PERF_SAMPLE_BRANCH_PLM_ALL ) !=PERF_SAMPLE_BRANCH_PLM_ALL ) -return -EINVAL ; -return 0 ; }
@@ -195,6 +191,21 @@ void amd_brs_disable_all(void)amd_brs_disable (); } +static bool amd_brs_match_plm (struct perf_event *event,u64 to) +{ +int type = event->attr.branch_sample_type; +int plm_k =PERF_SAMPLE_BRANCH_KERNEL |PERF_SAMPLE_BRANCH_HV ; +int plm_u =PERF_SAMPLE_BRANCH_USER ; + +if (!(type & plm_k) &&kernel_ip (to)) +return 0 ; + +if (!(type & plm_u) && !kernel_ip (to)) +return 0 ; + +return 1 ; +} +/* * Caller must ensure amd_brs_inuse() is true before calling * return:
@@ -252,8 +263,6 @@ void amd_brs_drain(void)if (to ==BRS_POISON )break ; -rdmsrl (brs_from (brs_idx), from); -/* * Sign-extend SAMP_BR_TO to 64 bits, bits 61-63 are reserved. * Necessary to generate proper virtual addresses suitable for
@@ -261,6 +270,11 @@ void amd_brs_drain(void)*/ to = (u64)(((s64 )to << shift) >> shift); +if (!amd_brs_match_plm (event, to)) +continue ; + +rdmsrl (brs_from (brs_idx), from); +perf_clear_branch_entry_bitfields (br+nr); br[nr].from = from;
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] perf/x86/amd: Enable branch sampling priv level filtering
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: 8910075d61a37e5b0d82e6c83ed9a0a31fe9ea08 Gitweb: https://git.kernel.org/tip/8910075d61a37e5b0d82e6c83ed9a0a31fe9ea08 Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:09 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:37 +02:00
perf/x86/amd: Enable branch sampling priv level filtering
The AMD Branch Sampling features does not provide hardware filtering by privilege level. The associated PMU counter does but not the branch sampling by itself. Given how BRS operates there is a possibility that BRS captures kernel level branches even though the event is programmed to count only at the user level.
Implement a workaround in software by removing the branches which belong to the wrong privilege level. The privilege level is evaluated on the target of the branch and not the source so as to be compatible with other architectures. As a consequence of this patch, the number of entries in the PERF_RECORD_BRANCH_STACK buffer may be less than the maximum (16). It could even be zero. Another consequence is that consecutive entries in the branch stack may not reflect actual code path and may have discontinuities, in case kernel branches were suppressed. But this is no different than what happens on other architectures.
--- arch/x86/events/amd/brs.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)
arch/x86/events/amd/brs.c +20 -6
@@ -92,10 +92,6 @@ int amd_brs_setup_filter(struct perf_event *event)if ((type & ~PERF_SAMPLE_BRANCH_PLM_ALL ) !=PERF_SAMPLE_BRANCH_ANY )return -EINVAL ; -/* can only capture at all priv levels due to the way BRS works */ -if ((type &PERF_SAMPLE_BRANCH_PLM_ALL ) !=PERF_SAMPLE_BRANCH_PLM_ALL ) -return -EINVAL ; -return 0 ; }
@@ -195,6 +191,21 @@ void amd_brs_disable_all(void)amd_brs_disable (); } +static bool amd_brs_match_plm (struct perf_event *event,u64 to) +{ +int type = event->attr.branch_sample_type; +int plm_k =PERF_SAMPLE_BRANCH_KERNEL |PERF_SAMPLE_BRANCH_HV ; +int plm_u =PERF_SAMPLE_BRANCH_USER ; + +if (!(type & plm_k) &&kernel_ip (to)) +return 0 ; + +if (!(type & plm_u) && !kernel_ip (to)) +return 0 ; + +return 1 ; +} +/* * Caller must ensure amd_brs_inuse() is true before calling * return:
@@ -252,8 +263,6 @@ void amd_brs_drain(void)if (to ==BRS_POISON )break ; -rdmsrl (brs_from (brs_idx), from); -/* * Sign-extend SAMP_BR_TO to 64 bits, bits 61-63 are reserved. * Necessary to generate proper virtual addresses suitable for
@@ -261,6 +270,11 @@ void amd_brs_drain(void)*/ to = (u64)(((s64 )to << shift) >> shift); +if (!amd_brs_match_plm (event, to)) +continue ; + +rdmsrl (brs_from (brs_idx), from); +perf_clear_branch_entry_bitfields (br+nr); br[nr].from = from;
PATCH v7 6/13 perf/x86/amd: add AMD branch sampling period adjustment
In reply to Stephane EranianAdd code to adjust the sampling event period when used with the Branch Sampling feature (BRS). Given the depth of the BRS (16), the period is reduced by that depth such that in the best case scenario, BRS saturates at the desired sampling period. In practice, though, the processor may execute more branches. Given a desired period P and a depth D, the kernel programs the actual period at P - D. After P occurrences of the sampling event, the counter overflows. It then may take X branches (skid) before the NMI is caught and held by the hardware and BRS activates. Then, after D branches, BRS saturates and the NMI is delivered. With no skid, the effective period would be (P - D) + D = P. In practice, however, it will likely be (P - D) + X + D. There is no way to eliminate X or predict X.
--- arch/x86/events/core.c | 7 +++++++ arch/x86/events/perf_event.h | 12 ++++++++++++ 2 files changed, 19 insertions(+)
arch/x86/events/core.c +7 -0
@@ -1374,6 +1374,13 @@ int x86_perf_event_set_period(struct perf_event *event) x86_pmu.set_topdown_event_period)return x86_pmu.set_topdown_event_period (event); +/* +* decrease period by the depth of the BRS feature to get +* the last N taken branches and approximate the desired period +*/ +if (has_branch_stack (event)) + period =amd_brs_adjust_period (period); +/* * If we are way outside a reasonable range then just skip forward: */
arch/x86/events/perf_event.h +12 -0
@@ -1263,6 +1263,14 @@ static inline bool amd_brs_active(void) return cpuc->brs_active; } +static inline s64 amd_brs_adjust_period (s64 period) +{ +if (period > x86_pmu.lbr_nr) +return period - x86_pmu.lbr_nr; + +return period; +} +#else /* CONFIG_CPU_SUP_AMD */ static inline int amd_pmu_init (void )
@@ -1287,6 +1295,10 @@ static inline void amd_brs_disable_all(void) { } +static inline s64 amd_brs_adjust_period (s64 period) +{ +return period; +}#endif /* CONFIG_CPU_SUP_AMD */ static inline int is_pebs_pt (struct perf_event *event)
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] perf/x86/amd: Add AMD branch sampling period adjustment
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: ba2fe7500845a30fc845a72081999cf632051862 Gitweb: https://git.kernel.org/tip/ba2fe7500845a30fc845a72081999cf632051862 Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:10 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:37 +02:00
perf/x86/amd: Add AMD branch sampling period adjustment
Add code to adjust the sampling event period when used with the Branch Sampling feature (BRS). Given the depth of the BRS (16), the period is reduced by that depth such that in the best case scenario, BRS saturates at the desired sampling period. In practice, though, the processor may execute more branches. Given a desired period P and a depth D, the kernel programs the actual period at P - D. After P occurrences of the sampling event, the counter overflows. It then may take X branches (skid) before the NMI is caught and held by the hardware and BRS activates. Then, after D branches, BRS saturates and the NMI is delivered. With no skid, the effective period would be (P - D) + D = P. In practice, however, it will likely be (P - D) + X + D. There is no way to eliminate X or predict X.
--- arch/x86/events/core.c | 7 +++++++ arch/x86/events/perf_event.h | 12 ++++++++++++ 2 files changed, 19 insertions(+)
arch/x86/events/core.c +7 -0
@@ -1375,6 +1375,13 @@ int x86_perf_event_set_period(struct perf_event *event)return x86_pmu.set_topdown_event_period (event);/* +* decrease period by the depth of the BRS feature to get +* the last N taken branches and approximate the desired period +*/ +if (has_branch_stack (event)) + period =amd_brs_adjust_period (period); + +/* * If we are way outside a reasonable range then just skip forward: */ if (unlikely (left <= -period)) {
arch/x86/events/perf_event.h +12 -0
@@ -1263,6 +1263,14 @@ static inline bool amd_brs_active(void) return cpuc->brs_active; } +static inline s64 amd_brs_adjust_period (s64 period) +{ +if (period > x86_pmu.lbr_nr) +return period - x86_pmu.lbr_nr; + +return period; +} +#else /* CONFIG_CPU_SUP_AMD */ static inline int amd_pmu_init (void )
@@ -1287,6 +1295,10 @@ static inline void amd_brs_disable_all(void) { } +static inline s64 amd_brs_adjust_period (s64 period) +{ +return period; +}#endif /* CONFIG_CPU_SUP_AMD */ static inline int is_pebs_pt (struct perf_event *event)
PATCH v7 7/13 perf/x86/amd: make Zen3 branch sampling opt-in
In reply to Stephane EranianAdd a kernel config option CONFIG_PERF_EVENTS_AMD_BRS to make the support for AMD Zen3 Branch Sampling (BRS) an opt-in compile time option.
--- arch/x86/events/Kconfig | 8 ++++++ arch/x86/events/amd/Makefile | 3 ++- arch/x86/events/perf_event.h | 49 ++++++++++++++++++++++++++++-------- 3 files changed, 49 insertions(+), 11 deletions(-)
arch/x86/events/Kconfig +8 -0
@@ -44,4 +44,12 @@ config PERF_EVENTS_AMD_UNCORE To compile this driver as a module, choose M here: the module will be called 'amd-uncore'. + +config PERF_EVENTS_AMD_BRS + depends on PERF_EVENTS && CPU_SUP_AMD + bool "AMD Zen3 Branch Sampling support" + help + Enable AMD Zen3 branch sampling support (BRS) which samples up to + 16 consecutive taken branches in registers. + endmenu
arch/x86/events/amd/Makefile +2 -1
@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CPU_SUP_AMD) += core.o brs.o +obj-$(CONFIG_CPU_SUP_AMD) += core.o +obj-$(CONFIG_PERF_EVENTS_AMD_BRS) += brs.o obj-$(CONFIG_PERF_EVENTS_AMD_POWER) += power.o obj-$(CONFIG_X86_LOCAL_APIC) += ibs.o obj-$(CONFIG_PERF_EVENTS_AMD_UNCORE) += amd-uncore.o
arch/x86/events/perf_event.h +39 -10
70 lines not on this page · raw message
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] perf/x86/amd: Make Zen3 branch sampling opt-in
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: cc37e520a236069c0de0e7ea455082fa11c73b12 Gitweb: https://git.kernel.org/tip/cc37e520a236069c0de0e7ea455082fa11c73b12 Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:11 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:38 +02:00
perf/x86/amd: Make Zen3 branch sampling opt-in
Add a kernel config option CONFIG_PERF_EVENTS_AMD_BRS to make the support for AMD Zen3 Branch Sampling (BRS) an opt-in compile time option.
--- arch/x86/events/Kconfig | 8 ++++++- arch/x86/events/amd/Makefile | 3 +- arch/x86/events/perf_event.h | 49 +++++++++++++++++++++++++++-------- 3 files changed, 49 insertions(+), 11 deletions(-)
arch/x86/events/Kconfig +8 -0
@@ -44,4 +44,12 @@ config PERF_EVENTS_AMD_UNCORE To compile this driver as a module, choose M here: the module will be called 'amd-uncore'. + +config PERF_EVENTS_AMD_BRS + depends on PERF_EVENTS && CPU_SUP_AMD + bool "AMD Zen3 Branch Sampling support" + help + Enable AMD Zen3 branch sampling support (BRS) which samples up to + 16 consecutive taken branches in registers. + endmenu
arch/x86/events/amd/Makefile +2 -1
@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CPU_SUP_AMD) += core.o brs.o +obj-$(CONFIG_CPU_SUP_AMD) += core.o +obj-$(CONFIG_PERF_EVENTS_AMD_BRS) += brs.o obj-$(CONFIG_PERF_EVENTS_AMD_POWER) += power.o obj-$(CONFIG_X86_LOCAL_APIC) += ibs.o obj-$(CONFIG_PERF_EVENTS_AMD_UNCORE) += amd-uncore.o
arch/x86/events/perf_event.h +39 -10
70 lines not on this page · raw message
PATCH v7 8/13 ACPI: add perf low power callback
In reply to Stephane EranianAdd an optional callback needed by some PMU features, e.g., AMD BRS, to give a chance to the perf_events code to change its state before a CPU goes to low power and after it comes back.
The callback is void when the PERF_NEEDS_LOPWR_CB flag is not set. This flag must be set in arch specific perf_event.h header whenever needed. When not set, there is no impact on the ACPI code.
--- drivers/acpi/acpi_pad.c | 6 ++++++ drivers/acpi/processor_idle.c | 5 +++++ include/linux/perf_event.h | 6 ++++++ 3 files changed, 17 insertions(+)
drivers/acpi/acpi_pad.c +6 -0
@@ -164,6 +164,9 @@ static int power_saving_thread(void *data) tsc_marked_unstable =1 ; }local_irq_disable (); + +perf_lopwr_cb (true); +tick_broadcast_enable ();tick_broadcast_enter ();stop_critical_timings ();
@@ -172,6 +175,9 @@ static int power_saving_thread(void *data)start_critical_timings ();tick_broadcast_exit (); + +perf_lopwr_cb (false); +local_irq_enable ();if (time_before (expire_time, jiffies)) {
drivers/acpi/processor_idle.c +5 -0
@@ -21,6 +21,7 @@#include <linux/cpuidle.h> #include <linux/cpu.h> #include <linux/minmax.h> +#include <linux/perf_event.h> #include <acpi/processor.h> /*
@@ -549,6 +550,8 @@ static void wait_for_freeze(void)*/ static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx) { +perf_lopwr_cb (true); +if (cx->entry_method ==ACPI_CSTATE_FFH ) {/* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter (cx);
@@ -559,6 +562,8 @@ static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)inb (cx->address);wait_for_freeze (); } + +perf_lopwr_cb (false); }/**
include/linux/perf_event.h +6 -0
@@ -1676,4 +1676,10 @@ typedef int (perf_snapshot_branch_stack_t)(struct perf_branch_entry *entries, unsigned int cnt);DECLARE_STATIC_CALL (perf_snapshot_branch_stack, perf_snapshot_branch_stack_t); +#ifndef PERF_NEEDS_LOPWR_CB +static inline void perf_lopwr_cb (bool mode) +{ +} +#endif +#endif /* _LINUX_PERF_EVENT_H */
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] ACPI: Add perf low power callback
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: 2a606a18cd672a16343d146a126721b34cc6adbd Gitweb: https://git.kernel.org/tip/2a606a18cd672a16343d146a126721b34cc6adbd Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:12 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:38 +02:00
ACPI: Add perf low power callback
Add an optional callback needed by some PMU features, e.g., AMD BRS, to give a chance to the perf_events code to change its state before a CPU goes to low power and after it comes back.
The callback is void when the PERF_NEEDS_LOPWR_CB flag is not set. This flag must be set in arch specific perf_event.h header whenever needed. When not set, there is no impact on the ACPI code.
--- drivers/acpi/acpi_pad.c | 7 +++++++ drivers/acpi/processor_idle.c | 5 +++++ include/linux/perf_event.h | 6 ++++++ 3 files changed, 18 insertions(+)
drivers/acpi/acpi_pad.c +7 -0
@@ -17,6 +17,7 @@#include <linux/tick.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/perf_event.h> #include <asm/mwait.h> #include <xen/xen.h>
@@ -164,6 +165,9 @@ static int power_saving_thread(void *data) tsc_marked_unstable =1 ; }local_irq_disable (); + +perf_lopwr_cb (true); +tick_broadcast_enable ();tick_broadcast_enter ();stop_critical_timings ();
@@ -172,6 +176,9 @@ static int power_saving_thread(void *data)start_critical_timings ();tick_broadcast_exit (); + +perf_lopwr_cb (false); +local_irq_enable ();if (time_before (expire_time, jiffies)) {
drivers/acpi/processor_idle.c +5 -0
@@ -21,6 +21,7 @@#include <linux/cpuidle.h> #include <linux/cpu.h> #include <linux/minmax.h> +#include <linux/perf_event.h> #include <acpi/processor.h> /*
@@ -549,6 +550,8 @@ static void wait_for_freeze(void)*/ static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx) { +perf_lopwr_cb (true); +if (cx->entry_method ==ACPI_CSTATE_FFH ) {/* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter (cx);
@@ -559,6 +562,8 @@ static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)inb (cx->address);wait_for_freeze (); } + +perf_lopwr_cb (false); }/**
include/linux/perf_event.h +6 -0
@@ -1676,4 +1676,10 @@ typedef int (perf_snapshot_branch_stack_t)(struct perf_branch_entry *entries, unsigned int cnt);DECLARE_STATIC_CALL (perf_snapshot_branch_stack, perf_snapshot_branch_stack_t); +#ifndef PERF_NEEDS_LOPWR_CB +static inline void perf_lopwr_cb (bool mode) +{ +} +#endif +#endif /* _LINUX_PERF_EVENT_H */
PATCH v7 9/13 perf/x86/amd: add idle hooks for branch sampling
In reply to Stephane EranianOn AMD Fam19h Zen3, the branch sampling (BRS) feature must be disabled before entering low power and re-enabled (if was active) when returning from low power. Otherwise, the NMI interrupt may be held up for too long and cause problems. Stopping BRS will cause the NMI to be delivered if it was held up.
Define a perf_amd_brs_lopwr_cb() callback to stop/restart BRS. The callback is protected by a jump label which is enabled only when AMD BRS is detected. In all other cases, the callback is never called.
--- arch/x86/events/amd/brs.c | 32 +++++++++++++++++++++++++++++++ arch/x86/events/amd/core.c | 4 ++++ arch/x86/events/perf_event.h | 1 + arch/x86/include/asm/perf_event.h | 21 ++++++++++++++++++++ 4 files changed, 58 insertions(+)
arch/x86/events/amd/brs.c +32 -0
@@ -7,6 +7,7 @@* Contributed by Stephane Eranian <[email protected]> */ #include <linux/kernel.h> +#include <linux/jump_label.h> #include <asm/msr.h> #include <asm/cpufeature.h>
@@ -329,3 +330,34 @@ void amd_pmu_brs_sched_task(struct perf_event_context *ctx, bool sched_in)if (sched_in)amd_brs_poison_buffer (); } + +DEFINE_STATIC_KEY_FALSE (perf_lopwr_needed); + +/* +* called from ACPI processor_idle.c or acpi_pad.c +* with interrupts disabled +*/ +void perf_amd_brs_lopwr_cb (bool lopwr_in) +{ +struct cpu_hw_events *cpuc =this_cpu_ptr (&cpu_hw_events); +union amd_debug_extn_cfg cfg; + +/* +* on mwait in, we may end up in non C0 state. +* we must disable branch sampling to avoid holding the NMI +* for too long. We disable it in hardware but we +* keep the state in cpuc, so we can re-enable. +* +* The hardware will deliver the NMI if needed when brsmen cleared +*/ +if (cpuc->brs_active) { + cfg.val =get_debug_extn_cfg (); + cfg.brsmen = !lopwr_in; +set_debug_extn_cfg (cfg.val); + } +} + +void __init amd_brs_lopwr_init (void ) +{ +static_branch_enable (&perf_lopwr_needed); +}
arch/x86/events/amd/core.c +4 -0
@@ -1,5 +1,6 @@// SPDX-License-Identifier: GPL-2.0-only #include <linux/perf_event.h> +#include <linux/jump_label.h> #include <linux/export.h> #include <linux/types.h> #include <linux/init.h>
@@ -1225,6 +1226,9 @@ static int __init amd_core_pmu_init(void)/* * put_event_constraints callback same as Fam17h, set above */ + +/* branch sampling must be stopped when entering low power */ +amd_brs_lopwr_init (); } x86_pmu.attr_update = amd_attr_update;
arch/x86/events/perf_event.h +1 -0
@@ -1226,6 +1226,7 @@ void amd_brs_enable(void);void amd_brs_enable_all (void );void amd_brs_disable_all (void );void amd_brs_drain (void ); +void amd_brs_lopwr_init (void );void amd_brs_disable_all (void );int amd_brs_setup_filter (struct perf_event *event);void amd_brs_reset (void );
arch/x86/include/asm/perf_event.h +21 -0
@@ -513,6 +513,27 @@ static inline void intel_pt_handle_vmx(int on)#if defined(CONFIG_PERF_EVENTS ) && defined(CONFIG_CPU_SUP_AMD )extern void amd_pmu_enable_virt (void );extern void amd_pmu_disable_virt (void ); + +#if defined(CONFIG_PERF_EVENTS_AMD_BRS ) + +#define PERF_NEEDS_LOPWR_CB 1 + +/* +* architectural low power callback impacts +* drivers/acpi/processor_idle.c +* drivers/acpi/acpi_pad.c +*/ +extern void perf_amd_brs_lopwr_cb (bool lopwr_in); +DECLARE_STATIC_KEY_FALSE (perf_lopwr_needed); + +static inline void perf_lopwr_cb (bool mode) +{ +/* key enabled only when BRS is available */ +if (static_branch_unlikely (&perf_lopwr_needed)) +perf_amd_brs_lopwr_cb (mode); +} +#endif /* PERF_NEEDS_LOPWR_CB */ +#else static inline void amd_pmu_enable_virt (void ) { }static inline void amd_pmu_disable_virt (void ) { }
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
[tip: perf/core] perf/x86/amd: Add idle hooks for branch sampling
The following commit has been merged into the perf/core branch of tip:
The following commit has been merged into the perf/core branch of tip:
Commit-ID: d5616bac7adadbf42a3b63b8717e75eb82a2cc2c Gitweb: https://git.kernel.org/tip/d5616bac7adadbf42a3b63b8717e75eb82a2cc2c Author: Stephane Eranian <[email protected]> AuthorDate: Tue, 22 Mar 2022 15:15:13 -07:00 Committer: Peter Zijlstra <[email protected]> CommitterDate: Tue, 05 Apr 2022 10:24:38 +02:00
perf/x86/amd: Add idle hooks for branch sampling
On AMD Fam19h Zen3, the branch sampling (BRS) feature must be disabled before entering low power and re-enabled (if was active) when returning from low power. Otherwise, the NMI interrupt may be held up for too long and cause problems. Stopping BRS will cause the NMI to be delivered if it was held up.
Define a perf_amd_brs_lopwr_cb() callback to stop/restart BRS. The callback is protected by a jump label which is enabled only when AMD BRS is detected. In all other cases, the callback is never called.
--- arch/x86/events/amd/brs.c | 33 ++++++++++++++++++++++++++++++- arch/x86/events/amd/core.c | 4 ++++- arch/x86/events/perf_event.h | 1 +- arch/x86/include/asm/perf_event.h | 23 +++++++++++++++++++++- 4 files changed, 61 insertions(+)
arch/x86/events/amd/brs.c +33 -0
@@ -7,6 +7,7 @@* Contributed by Stephane Eranian <[email protected]> */ #include <linux/kernel.h> +#include <linux/jump_label.h> #include <asm/msr.h> #include <asm/cpufeature.h>
@@ -329,3 +330,35 @@ void amd_pmu_brs_sched_task(struct perf_event_context *ctx, bool sched_in)if (sched_in)amd_brs_poison_buffer (); } + +/* +* called from ACPI processor_idle.c or acpi_pad.c +* with interrupts disabled +*/ +void perf_amd_brs_lopwr_cb (bool lopwr_in) +{ +struct cpu_hw_events *cpuc =this_cpu_ptr (&cpu_hw_events); +union amd_debug_extn_cfg cfg; + +/* +* on mwait in, we may end up in non C0 state. +* we must disable branch sampling to avoid holding the NMI +* for too long. We disable it in hardware but we +* keep the state in cpuc, so we can re-enable. +* +* The hardware will deliver the NMI if needed when brsmen cleared +*/ +if (cpuc->brs_active) { + cfg.val =get_debug_extn_cfg (); + cfg.brsmen = !lopwr_in; +set_debug_extn_cfg (cfg.val); + } +} + +DEFINE_STATIC_CALL_NULL (perf_lopwr_cb, perf_amd_brs_lopwr_cb); +EXPORT_STATIC_CALL_TRAMP_GPL (perf_lopwr_cb); + +void __init amd_brs_lopwr_init (void ) +{ +static_call_update (perf_lopwr_cb, perf_amd_brs_lopwr_cb); +}
arch/x86/events/amd/core.c +4 -0
@@ -1,5 +1,6 @@// SPDX-License-Identifier: GPL-2.0-only #include <linux/perf_event.h> +#include <linux/jump_label.h> #include <linux/export.h> #include <linux/types.h> #include <linux/init.h>
@@ -1225,6 +1226,9 @@ static int __init amd_core_pmu_init(void)/* * put_event_constraints callback same as Fam17h, set above */ + +/* branch sampling must be stopped when entering low power */ +amd_brs_lopwr_init (); } x86_pmu.attr_update = amd_attr_update;
arch/x86/events/perf_event.h +1 -0
@@ -1226,6 +1226,7 @@ void amd_brs_enable(void);void amd_brs_enable_all (void );void amd_brs_disable_all (void );void amd_brs_drain (void ); +void amd_brs_lopwr_init (void );void amd_brs_disable_all (void );int amd_brs_setup_filter (struct perf_event *event);void amd_brs_reset (void );
arch/x86/include/asm/perf_event.h +23 -0
@@ -2,6 +2,8 @@#ifndef _ASM_X86_PERF_EVENT_H#define _ASM_X86_PERF_EVENT_H +#include <linux/static_call.h> +/* * Performance event hw details: */
@@ -513,6 +515,27 @@ static inline void intel_pt_handle_vmx(int on)#if defined(CONFIG_PERF_EVENTS ) && defined(CONFIG_CPU_SUP_AMD )extern void amd_pmu_enable_virt (void );extern void amd_pmu_disable_virt (void ); + +#if defined(CONFIG_PERF_EVENTS_AMD_BRS ) + +#define PERF_NEEDS_LOPWR_CB 1 + +/* +* architectural low power callback impacts +* drivers/acpi/processor_idle.c +* drivers/acpi/acpi_pad.c +*/ +extern void perf_amd_brs_lopwr_cb (bool lopwr_in); + +DECLARE_STATIC_CALL (perf_lopwr_cb, perf_amd_brs_lopwr_cb); + +static inline void perf_lopwr_cb (bool lopwr_in) +{ +static_call_mod (perf_lopwr_cb)(lopwr_in); +} + +#endif /* PERF_NEEDS_LOPWR_CB */ +#else static inline void amd_pmu_enable_virt (void ) { }static inline void amd_pmu_disable_virt (void ) { }
PATCH v7 10/13 perf tools: fix NULL point in evsel__env()
In reply to Stephane Eranianevsel_env() cannot return NULL. In case evsel->evlist->env is NULL default to perf_env. Fixes crashes in evsel__open_strerror()
--- tools/perf/util/evsel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/evsel.c +1 -1
@@ -2965,7 +2965,7 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,struct perf_env *evsel__env (struct evsel *evsel) { -if (evsel && evsel->evlist) +if (evsel && evsel->evlist && evsel->evlist->env)return evsel->evlist->env;return &perf_env; }
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
Re: [PATCH v7 10/13] perf tools: fix NULL point in evsel__env()
Quoted 6 lines · Stephane Eranian
evsel_env()cannot return NULL. In caseevsel->evlist->envis NULL default toperf_env. Fixes crashes inevsel__open_strerror()Signed-off-by Ravi Bangoria <[email protected]>Reviewed-by Stephane Eranian <[email protected]>---
FWIW, here's a link to one of the original submissions:
https://lkml.org/lkml/2022/1/26/1220
Thanks,
Kim
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v7 10/13] perf tools: fix NULL point in evsel__env()
In reply to Stephane EranianEm Tue, Mar 22, 2022 at 03:15:14PM -0700, Stephane Eranian escreveu:
Quoted 5 lines
evsel_env()cannot return NULL. In caseevsel->evlist->envis NULL default toperf_env. Fixes crashes inevsel__open_strerror()Signed-off-by Ravi Bangoria <[email protected]>Reviewed-by Stephane Eranian <[email protected]>
I have this already in from a patch by Kim Phillips.
- Arnaldo
Quoted 19 lines
--- tools/perf/util/evsel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/util/evsel.c +1
-1@@ -2965,7 +2965,7 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,struct perf_env *evsel__env (struct evsel *evsel) { -if (evsel && evsel->evlist) +if (evsel && evsel->evlist && evsel->evlist->env)return evsel->evlist->env;return &perf_env; }Signature · 1 line
2.35.1.894.gb6a874cedc-goog
Signature · 1 line
- Arnaldo
Re: [PATCH v7 10/13] perf tools: fix NULL point in evsel__env()
Quoted 10 lines · Arnaldo Carvalho de Melo
Em Tue, Mar 22, 2022 at 03:15:14PM -0700, Stephane Eranian escreveu:
Quoted 5 lines
evsel_env()cannot return NULL. In caseevsel->evlist->envis NULL default toperf_env. Fixes crashes inevsel__open_strerror()Signed-off-by Ravi Bangoria <[email protected]>Reviewed-by Stephane Eranian <[email protected]>I have this already in from a patch by Kim Phillips.
Ok, then. We are all set.
Quoted 25 lines
- Arnaldo
Quoted 18 lines
--- tools/perf/util/evsel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/util/evsel.c +1
-2@@ -2965,7 +2965,7 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,struct perf_env *evsel__env (struct evsel *evsel) { -if (evsel && evsel->evlist) +if (evsel && evsel->evlist && evsel->evlist->env)return evsel->evlist->env;return &perf_env; } --Quoted 1 line
2.35.1.894.gb6a874cedc-goog
--
- Arnaldo
PATCH v7 11/13 perf tools: Improve IBS error handling
In reply to Stephane EranianFrom: Kim Phillips <[email protected]>
improve the error message returned on failed perf_event_open() on AMD when using IBS.
Output of executing 'perf record -e ibs_op// true' BEFORE this patch:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)for event (ibs_op//u). /bin/dmesg | grep -i perf may provide additional information.
Output after:
AMD IBS cannot exclude kernel events. Try running at a higher privilege level.
Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch:
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (ibs_op//). /bin/dmesg | grep -i perf may provide additional information.
Output after:
Error:
AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity
--- tools/perf/util/evsel.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
tools/perf/util/evsel.c +25 -0
@@ -2847,9 +2847,23 @@ static bool find_process(const char *name)return ret ? false : true; } +static bool is_amd (const char *arch,const char *cpuid) +{ +return arch && !strcmp ("x86" , arch) && cpuid &&strstarts (cpuid,"AuthenticAMD" ); +} + +static bool is_amd_ibs (struct evsel *evsel) +{ +return evsel->core.attr.precise_ip + || (evsel->pmu_name && !strncmp (evsel->pmu_name,"ibs" ,3 )); +} +int evsel__open_strerror (struct evsel *evsel,struct target *target,int err,char *msg,size_t size) { +struct perf_env *env =evsel__env (evsel); +const char *arch =perf_env__arch (env); +const char *cpuid =perf_env__cpuid (env);char sbuf[STRERR_BUFSIZE ];int printed =0 , enforced =0 ;
@@ -2949,6 +2963,17 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,return scnprintf (msg, size,"Invalid event (%s) in per-thread mode, enable system wide with '-a'." ,evsel__name (evsel)); +if (is_amd (arch, cpuid)) { +if (is_amd_ibs (evsel)) { +if (evsel->core.attr.exclude_kernel) +return scnprintf (msg, size, +"AMD IBS can't exclude kernel events. Try running at a higher privilege level." ); +if (!evsel->core.system_wide) +return scnprintf (msg, size, +"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" ); + } + } +break ;case ENODATA : return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
Arnaldo Carvalho de Melo
maintainerRe: [PATCH v7 11/13] perf tools: Improve IBS error handling
Em Tue, Mar 22, 2022 at 03:15:15PM -0700, Stephane Eranian escreveu:
Quoted 5 lines
From: Kim Phillips <[email protected]>
improve the error message returned on failed
perf_event_open()on AMD when using IBS.
Quoted 8 lines
Output of executing 'perf record -e ibs_op// true' BEFORE this patch:
The
sys_perf_event_open()syscall returned with 22 (Invalid argument)for event (ibs_op//u)./bin/dmesg| grep -i perf may provide additional information.Output after:
AMD IBS cannot exclude kernel events. Try running at a higher privilege level.
So the error message don't match up the BEFORE part, that didn't have a "u" at the end, and with this patch in:
$ git log --oneline -1 ca585f91ce13df4c (HEAD -> perf/core) perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages # perf -v perf version 5.17.gca585f91ce13 #
On a:
# grep -m1 "model name" /proc/cpuinfo model name : AMD Ryzen 9 5950X 16-Core Processor #
If I try:
# perf record -e ibs_op//u true Error: Invalid event (ibs_op//u) in per-thread mode, enable system wide with '-a'. #
So now if I try:
# perf record -a -e ibs_op//u true Error: AMD IBS can't exclude kernel events. Try running at a higher privilege level. #
So the problem is with the patch description, I'm fixing it.
Quoted 10 lines
Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch:
Error:
Thesys_perf_event_open()syscall returned with 22 (Invalid argument) for event (ibs_op//)./bin/dmesg| grep -i perf may provide additional information.Output after:
Error:
AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity
But this one is never reached:
[root@five ~]# perf record -e ibs_op// true
Error:
Invalid event (ibs_op//) in per-thread mode, enable system wide with '-a'
tools/perf/util/evsel.c int evsel__open_strerror(struct evsel *evsel, struct target *target, · line 2973
Quoted 3 lines
tools/perf/util/evsel.c +3
-0+if (!evsel->core.system_wide) +return scnprintf (msg, size, +"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" );
I'm applying this to make progress, the message now provides more clues.
- Arnaldo
Quoted 67 lines
Signed-off-by Kim Phillips <[email protected]>Cc Arnaldo Carvalho de Melo <[email protected]>Cc Alexander Shishkin <[email protected]>Cc Boris Ostrovsky <[email protected]>Cc Ian Rogers <[email protected]>Cc Ingo Molnar <[email protected]>Cc Jiri Olsa <[email protected]>Cc Joao Martins <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Cc Mark Rutland <[email protected]>Cc Michael Petlan <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Robert Richter <[email protected]>Cc Stephane Eranian <[email protected]>--- tools/perf/util/evsel.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)tools/perf/util/evsel.c +25
-0@@ -2847,9 +2847,23 @@ static bool find_process(const char *name)return ret ? false : true; } +static bool is_amd (const char *arch,const char *cpuid) +{ +return arch && !strcmp ("x86" , arch) && cpuid &&strstarts (cpuid,"AuthenticAMD" ); +} + +static bool is_amd_ibs (struct evsel *evsel) +{ +return evsel->core.attr.precise_ip + || (evsel->pmu_name && !strncmp (evsel->pmu_name,"ibs" ,3 )); +} +int evsel__open_strerror (struct evsel *evsel,struct target *target,int err,char *msg,size_t size) { +struct perf_env *env =evsel__env (evsel); +const char *arch =perf_env__arch (env); +const char *cpuid =perf_env__cpuid (env);char sbuf[STRERR_BUFSIZE ];int printed =0 , enforced =0 ;@@ -2949,6 +2963,17 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,return scnprintf (msg, size,"Invalid event (%s) in per-thread mode, enable system wide with '-a'." ,evsel__name (evsel)); +if (is_amd (arch, cpuid)) { +if (is_amd_ibs (evsel)) { +if (evsel->core.attr.exclude_kernel) +return scnprintf (msg, size, +"AMD IBS can't exclude kernel events. Try running at a higher privilege level." ); +if (!evsel->core.system_wide) +return scnprintf (msg, size, +"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" ); + } + } +break ;case ENODATA : return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "Signature · 1 line
2.35.1.894.gb6a874cedc-goog
Signature · 1 line
- Arnaldo
Re: [PATCH v7 11/13] perf tools: Improve IBS error handling
Em Fri, Mar 25, 2022 at 06:46:08PM -0300, Arnaldo Carvalho de Melo escreveu:
Quoted 11 lines
Em Tue, Mar 22, 2022 at 03:15:15PM -0700, Stephane Eranian escreveu:
Quoted 10 lines
From: Kim Phillips <[email protected]>
improve the error message returned on failed
perf_event_open()on AMD when using IBS.Output of executing 'perf record -e ibs_op// true' BEFORE this patch:
The
sys_perf_event_open()syscall returned with 22 (Invalid argument)for event (ibs_op//u)./bin/dmesg| grep -i perf may provide additional information.
Quoted 6 lines
Quoted 3 lines
Output after:
AMD IBS cannot exclude kernel events. Try running at a higher privilege level.
So the error message don't match up the BEFORE part, that didn't have a "u" at the end, and with this patch in:
I see, the patch description doesn't mention that the BEFORE command is run as a NON root user, when the 'u' suffix is auto-added by perf, I'm ammending the comment log message with this.
Now it reads:
----------------------------------------------------------------------
perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages
Improve the error message returned on failed perf_event_open() on AMD systems when using IBS (Instruction-Based Sampling).
Output of executing 'perf record -e ibs_op// true' as a non root user BEFORE this patch (perf will add the 'u' modifier at the end to exclude kernel/hypervisor sampling):
The sys_perf_event_open() syscall returned with 22 (Invalid argument)for event (ibs_op//u). /bin/dmesg | grep -i perf may provide additional information.
Output after:
AMD IBS can't exclude kernel events. Try running at a higher privilege level.
Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch:
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (ibs_op//). /bin/dmesg | grep -i perf may provide additional information.
Output after:
Error:
Invalid event (ibs_op//) in per-thread mode, enable system wide with '-a'.
Folowing the suggestion:
$ sudo perf record -a -e ibs_op// true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.664 MB perf.data (194 samples) ] $
----------------------------------------------------------------------
This is all with:
[root@five ~]# uname -a
Linux five 5.16.16-200.fc35.x86_64 #1 SMP PREEMPT Sat Mar 19 13:52:41 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
- Arnaldo
Quoted 126 lines
$ git log --oneline -1 ca585f91ce13df4c (HEAD -> perf/core) perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages # perf -v perf version 5.17.gca585f91ce13 #On a:
# grep -m1 "model name" /proc/cpuinfo model name : AMD Ryzen 9 5950X 16-Core Processor #If I try:
# perf record -e ibs_op//u true Error: Invalid event (ibs_op//u) in per-thread mode, enable system wide with '-a'. #So now if I try:
# perf record -a -e ibs_op//u true Error: AMD IBS can't exclude kernel events. Try running at a higher privilege level. #So the problem is with the patch description, I'm fixing it.
Quoted 10 lines
Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch:
Error:
Thesys_perf_event_open()syscall returned with 22 (Invalid argument) for event (ibs_op//)./bin/dmesg| grep -i perf may provide additional information.Output after:
Error:
AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinityBut this one is never reached:
[root@five ~]# perf record -e ibs_op// true
Error:
Invalid event (ibs_op//) in per-thread mode, enable system wide with '-a'tools/perf/util/evsel.c int evsel__open_strerror(struct evsel *evsel, struct target *target, · line 2973
Quoted 3 lines
tools/perf/util/evsel.c +3
-0+if (!evsel->core.system_wide) +return scnprintf (msg, size, +"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" );I'm applying this to make progress, the message now provides more clues.
- Arnaldo
Quoted 67 lines
Signed-off-by Kim Phillips <[email protected]>Cc Arnaldo Carvalho de Melo <[email protected]>Cc Alexander Shishkin <[email protected]>Cc Boris Ostrovsky <[email protected]>Cc Ian Rogers <[email protected]>Cc Ingo Molnar <[email protected]>Cc Jiri Olsa <[email protected]>Cc Joao Martins <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Cc Mark Rutland <[email protected]>Cc Michael Petlan <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Robert Richter <[email protected]>Cc Stephane Eranian <[email protected]>--- tools/perf/util/evsel.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)tools/perf/util/evsel.c +25
-0@@ -2847,9 +2847,23 @@ static bool find_process(const char *name)return ret ? false : true; } +static bool is_amd (const char *arch,const char *cpuid) +{ +return arch && !strcmp ("x86" , arch) && cpuid &&strstarts (cpuid,"AuthenticAMD" ); +} + +static bool is_amd_ibs (struct evsel *evsel) +{ +return evsel->core.attr.precise_ip + || (evsel->pmu_name && !strncmp (evsel->pmu_name,"ibs" ,3 )); +} +int evsel__open_strerror (struct evsel *evsel,struct target *target,int err,char *msg,size_t size) { +struct perf_env *env =evsel__env (evsel); +const char *arch =perf_env__arch (env); +const char *cpuid =perf_env__cpuid (env);char sbuf[STRERR_BUFSIZE ];int printed =0 , enforced =0 ;@@ -2949,6 +2963,17 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,return scnprintf (msg, size,"Invalid event (%s) in per-thread mode, enable system wide with '-a'." ,evsel__name (evsel)); +if (is_amd (arch, cpuid)) { +if (is_amd_ibs (evsel)) { +if (evsel->core.attr.exclude_kernel) +return scnprintf (msg, size, +"AMD IBS can't exclude kernel events. Try running at a higher privilege level." ); +if (!evsel->core.system_wide) +return scnprintf (msg, size, +"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" ); + } + } +break ;case ENODATA : return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "Signature · 1 line
2.35.1.894.gb6a874cedc-googSignature · 1 line
- Arnaldo
Signature · 1 line
- Arnaldo
PATCH v7 12/13 perf tools: Improve error handling of AMD Branch Sampling
In reply to Stephane EranianImprove the error message printed by perf when perf_event_open() fails on AMD Zen3 when using the branch sampling feature. In the case of EINVAL, there are two main reasons: frequency mode or period is smaller than the depth of the branch sampling buffer (16). The patch checks the parameters of the call and tries to print a relevant message to explain the error:
$ perf record -b -e cpu/branch-brs/ -c 10 ls Error: AMD Branch Sampling does not support sampling period smaller than what is reported in /sys/devices/cpu/caps/branches.
$ perf record -b -e cpu/branch-brs/ ls Error: AMD Branch Sampling does not support frequency mode sampling, must pass a fixed sampling period via -c option or cpu/branch-brs,period=xxxx/.
--- tools/perf/util/evsel.c | 43 ++++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 11 deletions(-)
tools/perf/util/evsel.c +32 -11
@@ -2858,6 +2858,16 @@ static bool is_amd_ibs(struct evsel *evsel) || (evsel->pmu_name && !strncmp(evsel->pmu_name, "ibs", 3)); } +static bool is_amd_brs_event (struct evsel *evsel) +{ +return (evsel->core.attr.config &0xff ) ==0xc4 ; +} + +static bool has_amd_brs (struct evsel *evsel) +{ +return (evsel->core.attr.sample_type &PERF_SAMPLE_BRANCH_STACK ); +} +int evsel__open_strerror (struct evsel *evsel,struct target *target,int err,char *msg,size_t size) {
@@ -2947,6 +2957,28 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target, "We found oprofile daemon running, please stop it and try again.");break ;case EINVAL : +if (is_amd (arch, cpuid)) { +if (is_amd_ibs (evsel)) { +if (evsel->core.attr.exclude_kernel) +return scnprintf (msg, size, +"AMD IBS can't exclude kernel events. Try running at a higher privilege level." ); +if (!evsel->core.system_wide) +return scnprintf (msg, size, +"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" ); + } +if (has_amd_brs (evsel)) { +if (!is_amd_brs_event (evsel)) +return scnprintf (msg, size, +"AMD Branch Sampling can only be used with the cpu/branch-brs,period=xxxx/ event or equivalent encodings." ); +if (evsel->core.attr.freq) +return scnprintf (msg, size, +"AMD Branch Sampling does not support frequency mode sampling, must pass a fixed sampling period via -c option or cpu/branch-brs,period=xxxx/." ); +/* another reason is that the period is too small */ +return scnprintf (msg, size, +"AMD Branch Sampling does not support sampling period smaller than what is reported in /sys/devices/cpu/caps/branches." ); + } + } +if (evsel->core.attr.sample_type &PERF_SAMPLE_CODE_PAGE_SIZE && perf_missing_features.code_page_size)return scnprintf (msg, size,"Asking for the code page size isn't supported by this kernel." );if (evsel->core.attr.sample_type &PERF_SAMPLE_DATA_PAGE_SIZE && perf_missing_features.data_page_size)
@@ -2963,17 +2995,6 @@ int evsel__open_strerror(struct evsel *evsel, struct target *target,return scnprintf (msg, size,"Invalid event (%s) in per-thread mode, enable system wide with '-a'." ,evsel__name (evsel)); -if (is_amd (arch, cpuid)) { -if (is_amd_ibs (evsel)) { -if (evsel->core.attr.exclude_kernel) -return scnprintf (msg, size, -"AMD IBS can't exclude kernel events. Try running at a higher privilege level." ); -if (!evsel->core.system_wide) -return scnprintf (msg, size, -"AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity" ); - } - } -break ;case ENODATA : return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
PATCH v7 13/13 perf report: add addr_from/addr_to sort dimensions
In reply to Stephane EranianWith the existing symbol_from/symbol_to, branches captured in the same function would be collapsed into a single function if the latencies associated with the each branch (cycles) were all the same. That is the case on Intel Broadwell, for instance. Since Intel Skylake, the latency is captured by hardware and therefore is used to disambiguate branches.
Add addr_from/addr_to sort dimensions to sort branches based on their addresses and not the function there are in. The output is still the function name but the offset within the function is provided to uniquely identify each branch. These new sort dimensions also help with annotate because they create different entries in the histogram which, in turn, generates proper branch annotations.
Here is an example using AMD's branch sampling:
$ perf record -a -b -c 1000037 -e cpu/branch-brs/ test_prg
$ perf report Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276 Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycle 99.65% test_prg test_prg [.] test_thread [.] test_thread - 0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_timer_interrupt [k] error_entry -
$ perf report -F overhead,comm,dso,addr_from,addr_to Samples: 6M of event 'cpu/branch-brs/', Event count (approx.): 6901276 Overhead Command Shared Object Source Address Target Address 4.22% test_prg test_prg [.] test_thread+0x3c [.] test_thread+0x4 4.13% test_prg test_prg [.] test_thread+0x4 [.] test_thread+0x3a 4.09% test_prg test_prg [.] test_thread+0x3a [.] test_thread+0x6 4.08% test_prg test_prg [.] test_thread+0x2 [.] test_thread+0x3c 4.06% test_prg test_prg [.] test_thread+0x3e [.] test_thread+0x2 3.87% test_prg test_prg [.] test_thread+0x6 [.] test_thread+0x38 3.84% test_prg test_prg [.] test_thread [.] test_thread+0x3e 3.76% test_prg test_prg [.] test_thread+0x1e [.] test_thread 3.76% test_prg test_prg [.] test_thread+0x38 [.] test_thread+0x8 3.56% test_prg test_prg [.] test_thread+0x22 [.] test_thread+0x1e 3.54% test_prg test_prg [.] test_thread+0x8 [.] test_thread+0x36 3.47% test_prg test_prg [.] test_thread+0x1c [.] test_thread+0x22 3.45% test_prg test_prg [.] test_thread+0x36 [.] test_thread+0xa 3.28% test_prg test_prg [.] test_thread+0x24 [.] test_thread+0x1c 3.25% test_prg test_prg [.] test_thread+0xa [.] test_thread+0x34 3.24% test_prg test_prg [.] test_thread+0x1a [.] test_thread+0x24 3.20% test_prg test_prg [.] test_thread+0x34 [.] test_thread+0xc 3.04% test_prg test_prg [.] test_thread+0x26 [.] test_thread+0x1a 3.01% test_prg test_prg [.] test_thread+0xc [.] test_thread+0x32 2.98% test_prg test_prg [.] test_thread+0x18 [.] test_thread+0x26 2.94% test_prg test_prg [.] test_thread+0x32 [.] test_thread+0xe 2.76% test_prg test_prg [.] test_thread+0x28 [.] test_thread+0x18 2.73% test_prg test_prg [.] test_thread+0xe [.] test_thread+0x30 2.67% test_prg test_prg [.] test_thread+0x30 [.] test_thread+0x10 2.67% test_prg test_prg [.] test_thread+0x16 [.] test_thread+0x28 2.46% test_prg test_prg [.] test_thread+0x10 [.] test_thread+0x2e 2.44% test_prg test_prg [.] test_thread+0x2a [.] test_thread+0x16 2.38% test_prg test_prg [.] test_thread+0x14 [.] test_thread+0x2a 2.32% test_prg test_prg [.] test_thread+0x2e [.] test_thread+0x12 2.28% test_prg test_prg [.] test_thread+0x12 [.] test_thread+0x2c 2.16% test_prg test_prg [.] test_thread+0x2c [.] test_thread+0x14 0.02% test_prg [kernel.vmlinux] [k] asm_sysvec_apic_ti+0x5 [k] error_entry
--- tools/perf/util/hist.c | 2 + tools/perf/util/hist.h | 2 + tools/perf/util/sort.c | 128 +++++++++++++++++++++++++++++++++++++++++ tools/perf/util/sort.h | 2 + 4 files changed, 134 insertions(+)
tools/perf/util/hist.c +2 -0
@@ -124,6 +124,7 @@ void hists__calc_col_len(struct hists *hists, struct hist_entry *h) }else { symlen = unresolved_col_width +4 +2 ;hists__new_col_len (hists,HISTC_SYMBOL_FROM , symlen); +hists__new_col_len (hists,HISTC_ADDR_FROM , symlen);hists__set_unres_dso_col_len (hists,HISTC_DSO_FROM ); }
@@ -138,6 +139,7 @@ void hists__calc_col_len(struct hists *hists, struct hist_entry *h) }else { symlen = unresolved_col_width +4 +2 ;hists__new_col_len (hists,HISTC_SYMBOL_TO , symlen); +hists__new_col_len (hists,HISTC_ADDR_TO , symlen);hists__set_unres_dso_col_len (hists,HISTC_DSO_TO ); }
tools/perf/util/hist.h +2 -0
@@ -77,6 +77,8 @@ enum hist_column {HISTC_GLOBAL_INS_LAT ,HISTC_LOCAL_P_STAGE_CYC ,HISTC_GLOBAL_P_STAGE_CYC , +HISTC_ADDR_FROM , +HISTC_ADDR_TO , HISTC_NR_COLS, /* Last entry */ };
tools/perf/util/sort.c +128 -0
146 lines not on this page · raw message
tools/perf/util/sort.h +2 -0
@@ -251,6 +251,8 @@ enum sort_type {SORT_SRCLINE_FROM ,SORT_SRCLINE_TO ,SORT_SYM_IPC , +SORT_ADDR_FROM , +SORT_ADDR_TO ,/* memory mode specific sort keys */ __SORT_MEMORY_MODE,
Signature · 1 line
2.35.1.894.gb6a874cedc-goog
Peter Zijlstra
maintainerQuoted 6 lines · Stephane Eranian
V7 makes the following changes:
- rebased to 5.17-rc8
- Restrict BRS to be used only withRETIRED_TAKEN_BRANCHevent in order to avoid adding more skid to other events in case that are monitored concurrently
- fixed bugs in the perf tool enhanced error handling for IBS and BRS
But afaict you failed to pick up the build fixes I did in my tree :/ Let me try and be careful preserving those while munging this in.
Quoted 11 lines · Peter Zijlstra
Quoted 6 lines · Stephane Eranian
V7 makes the following changes:
- rebased to 5.17-rc8
- Restrict BRS to be used only withRETIRED_TAKEN_BRANCHevent in order to avoid adding more skid to other events in case that are monitored concurrently
- fixed bugs in the perf tool enhanced error handling for IBS and BRSBut afaict you failed to pick up the build fixes I did in my tree :/ Let me try and be careful preserving those while munging this in.
Sorry. I missed that. I can resubmit if you prefer.
Peter Zijlstra
maintainerQuoted 10 lines · Stephane Eranian
Quoted 9 lines · Peter Zijlstra
Quoted 6 lines · Stephane Eranian
V7 makes the following changes:
- rebased to 5.17-rc8
- Restrict BRS to be used only withRETIRED_TAKEN_BRANCHevent in order to avoid adding more skid to other events in case that are monitored concurrently
- fixed bugs in the perf tool enhanced error handling for IBS and BRS
Quoted 4 lines
Quoted 2 lines
But afaict you failed to pick up the build fixes I did in my tree :/ Let me try and be careful preserving those while munging this in.
Sorry. I missed that. I can resubmit if you prefer.
Nah, fixed it up again.. Even converted to static_call() this time.
Could you please test this branch?
https://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git/log/?h=perf/amd
I've since done more Changelog edits, and I should do a comment with the static_call_mod() usage, but I think this ought to work.
At least it now actually builds...
Quoted 12 lines · Peter Zijlstra
Quoted 10 lines · Stephane Eranian
Quoted 9 lines · Peter Zijlstra
Quoted 6 lines · Stephane Eranian
V7 makes the following changes:
- rebased to 5.17-rc8
- Restrict BRS to be used only withRETIRED_TAKEN_BRANCHevent in order to avoid adding more skid to other events in case that are monitored concurrently
- fixed bugs in the perf tool enhanced error handling for IBS and BRS
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
But afaict you failed to pick up the build fixes I did in my tree :/ Let me try and be careful preserving those while munging this in.
Sorry. I missed that. I can resubmit if you prefer.
Nah, fixed it up again.. Even converted to
static_call()this time.Could you please test this branch?
Started testing. BRS does not come up so far. Let me debug this.
Quoted 7 lines
https://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git/log/?h=perf/amd
I've since done more Changelog edits, and I should do a comment with the
static_call_mod()usage, but I think this ought to work.At least it now actually builds...
Quoted 17 lines · Stephane Eranian
Quoted 15 lines · Peter Zijlstra
Quoted 13 lines · Stephane Eranian
Quoted 11 lines · Peter Zijlstra
Quoted 6 lines · Stephane Eranian
V7 makes the following changes:
- rebased to 5.17-rc8
- Restrict BRS to be used only withRETIRED_TAKEN_BRANCHevent in order to avoid adding more skid to other events in case that are monitored concurrently
- fixed bugs in the perf tool enhanced error handling for IBS and BRSBut afaict you failed to pick up the build fixes I did in my tree :/ Let me try and be careful preserving those while munging this in.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Sorry. I missed that. I can resubmit if you prefer.
Nah, fixed it up again.. Even converted to
static_call()this time.Could you please test this branch?
Started testing. BRS does not come up so far. Let me debug this.
False alarm. I had not forced the config option. With the config option enabled, it works as expected.
I just found a minor issue in case BRS is not enabled. To be consistent, we should do:
arch/x86/events/perf_event.h +1 -1
@@ -1265,7 +1265,7 @@ static inline s64 amd_brs_adjust_period(s64 period)#else static inline int amd_brs_init (void ) { -return 0 ; +return -EOPNOTSUPP ; }
Thanks.
Quoted 7 lines
Quoted 7 lines
https://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue.git/log/?h=perf/amd
I've since done more Changelog edits, and I should do a comment with the
static_call_mod()usage, but I think this ought to work.At least it now actually builds...
Peter Zijlstra
maintainerQuoted 2 lines · Stephane Eranian
False alarm. I had not forced the config option. With the config option enabled, it works as expected.
Great!
arch/x86/events/perf_event.h static inline s64 amd_brs_adjust_period(s64 period) · line 1269
Quoted 12 lines
I just found a minor issue in case BRS is not enabled. To be consistent, we should do:
arch/x86/events/perf_event.h +1
-1@@ -1265,7 +1265,7 @@ static inline s64 amd_brs_adjust_period(s64 period)#else static inline int amd_brs_init (void ) { -return 0 ; +return -EOPNOTSUPP ; }
Done!