Skip to contentSkip to conversation

perf/arm: adjust hwevents mappings on boot

PATCH In review Stephane Eranian 2 participants 3 messages Mar 24, 2022 – May 6, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 perf/arm: adjust hwevents mappings on boot

The mapping of perf_events generic hardware events to actual PMU events on ARM PMUv3 may not always be correct. This is in particular true for the PERF_COUNT_HW_BRANCH_INSTRUCTIONS event. Although the mapping points to an architected event, it may not always be available. This can be seen with a simple:

$ perf stat -e branches sleep 0
 Performance counter stats for 'sleep 0':

<not supported> branches

       0.001401081 seconds time elapsed

Yet the hardware does have an event that could be used for branches. This patch fixes the problem by dynamically validating the generic hardware events against the supported architected events. If a mapping is wrong it can be replaced it with another. This is done for the event above at boot time and the kernel will log the remapping:

armv8_pmuv3: hwevent HW_BRANCH_INSTRUCTIONS remapped from 0xc to 0x21

And with that:

$ perf stat -e branches sleep 0

Performance counter stats for 'sleep 0':

           166,739      branches

       0.000832163 seconds time elapsed
---
 arch/arm64/kernel/perf_event.c | 41 +++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)
arch/arm64/kernel/perf_event.c +40 -1
index cab678ed6618..d438f5a46bdc 100644
@@ -39,7 +39,7 @@
  * be supported on any given implementation. Unsupported events will
  * be disabled at run-time based on the PMCEID registers.
  */
-static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
+static unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
 	PERF_MAP_ALL_UNSUPPORTED,
 	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INST_RETIRED,
@@ -1222,6 +1222,42 @@ static void armv8_pmu_register_sysctl_table(void)
 		register_sysctl("kernel", armv8_pmu_sysctl_table);
 }
 
+static void armv8pmu_fixup_perf_map(struct arm_pmu *cpu_pmu)
+{
+	int i, code;
+	unsigned *map = armv8_pmuv3_perf_map;
+
+	for (i = 0; i < PERF_COUNT_HW_MAX; i++) {
+retry:
+		code = map[i];
+		if (code == HW_OP_UNSUPPORTED)
+			continue;
+
+		if (test_bit(map[i], cpu_pmu->pmceid_bitmap))
+			continue;
+		/*
+		 * mapping does not exist,
+		 * let's see if we can fix it
+		 */
+		switch (i) {
+		case PERF_COUNT_HW_BRANCH_INSTRUCTIONS:
+			if (code == ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED) {
+				map[i] = ARMV8_PMUV3_PERFCTR_BR_RETIRED;
+				pr_info("armv8_pmuv3: hwevent "
+					"HW_BRANCH_INSTRUCTIONS remapped "
+					" from 0x%x to 0x%x\n", code, map[i]);
+				goto retry;
+			}
+			break;
+		default:
+			pr_info("armv8_pmuv3: hwevent %d not supported\n", i);
+			map[i] = HW_OP_UNSUPPORTED;
+			break;
+		}
+
+	}
+}
+
 static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name,
 			  int (*map_event)(struct perf_event *event),
 			  const struct attribute_group *events,
@@ -1249,6 +1285,9 @@ static int armv8_pmu_init(struct arm_pmu *cpu_pmu, char *name,
 
 	cpu_pmu->name			= name;
 	cpu_pmu->map_event		= map_event;
+
+	armv8pmu_fixup_perf_map(cpu_pmu);
+
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = events ?
 			events : &armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = format ?
Signature · 1 line
2.35.1.1021.g381101b075-goog
maintainer
#1 lore raw
Quoted 72 lines · Stephane Eranian

The mapping of perf_events generic hardware events to actual PMU events on ARM PMUv3 may not always be correct. This is in particular true for the PERF_COUNT_HW_BRANCH_INSTRUCTIONS event. Although the mapping points to an architected event, it may not always be available. This can be seen with a simple:

$ perf stat -e branches sleep 0
 Performance counter stats for 'sleep 0':

<not supported> branches

       0.001401081 seconds time elapsed

Yet the hardware does have an event that could be used for branches. This patch fixes the problem by dynamically validating the generic hardware events against the supported architected events. If a mapping is wrong it can be replaced it with another. This is done for the event above at boot time and the kernel will log the remapping:

armv8_pmuv3: hwevent HW_BRANCH_INSTRUCTIONS remapped from 0xc to 0x21

And with that:

$ perf stat -e branches sleep 0

Performance counter stats for 'sleep 0':

           166,739      branches

       0.000832163 seconds time elapsed
---
 arch/arm64/kernel/perf_event.c | 41 +++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)
arch/arm64/kernel/perf_event.c +20 -1
index cab678ed6618..d438f5a46bdc 100644
@@ -39,7 +39,7 @@
  * be supported on any given implementation. Unsupported events will
  * be disabled at run-time based on the PMCEID registers.
  */
-static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
+static unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
 	PERF_MAP_ALL_UNSUPPORTED,
 	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INST_RETIRED,
@@ -1222,6 +1222,42 @@ static void armv8_pmu_register_sysctl_table(void)
 		register_sysctl("kernel", armv8_pmu_sysctl_table);
 }
 
+static void armv8pmu_fixup_perf_map(struct arm_pmu *cpu_pmu)
+{
+	int i, code;
+	unsigned *map = armv8_pmuv3_perf_map;
+
+	for (i = 0; i < PERF_COUNT_HW_MAX; i++) {
+retry:
+		code = map[i];
+		if (code == HW_OP_UNSUPPORTED)
+			continue;
+
+		if (test_bit(map[i], cpu_pmu->pmceid_bitmap))
+			continue;
+		/*
+		 * mapping does not exist,
+		 * let's see if we can fix it
+		 */
+		switch (i) {
+		case PERF_COUNT_HW_BRANCH_INSTRUCTIONS:

arch/arm64/kernel/perf_event.c static void armv8_pmu_register_sysctl_table(void) · line 1253

Quoted 10 lines
arch/arm64/kernel/perf_event.c +10 -0
+			if (code == ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED) {
+				map[i] = ARMV8_PMUV3_PERFCTR_BR_RETIRED;
+				pr_info("armv8_pmuv3: hwevent "
+					"HW_BRANCH_INSTRUCTIONS remapped "
+					" from 0x%x to 0x%x\n", code, map[i]);
+				goto retry;
+			}
+			break;
+		default:
+			pr_info("armv8_pmuv3: hwevent %d not supported\n", i);

If a CPU supports neither ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED nor ARMV8_PMUV3_PERFCTR_BR_RETIRED, won't we get a funny series of messages here? I think I'd prefer to drop the prints altogether.

Will

#2 lore raw
Quoted 80 lines · Will Deacon
Quoted 78 lines · Stephane Eranian

The mapping of perf_events generic hardware events to actual PMU events on ARM PMUv3 may not always be correct. This is in particular true for the PERF_COUNT_HW_BRANCH_INSTRUCTIONS event. Although the mapping points to an architected event, it may not always be available. This can be seen with a simple:

$ perf stat -e branches sleep 0
 Performance counter stats for 'sleep 0':

<not supported> branches

       0.001401081 seconds time elapsed

Yet the hardware does have an event that could be used for branches. This patch fixes the problem by dynamically validating the generic hardware events against the supported architected events. If a mapping is wrong it can be replaced it with another. This is done for the event above at boot time and the kernel will log the remapping:

armv8_pmuv3: hwevent HW_BRANCH_INSTRUCTIONS remapped from 0xc to 0x21

And with that:

$ perf stat -e branches sleep 0

Performance counter stats for 'sleep 0':

           166,739      branches

       0.000832163 seconds time elapsed
---
 arch/arm64/kernel/perf_event.c | 41 +++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)
arch/arm64/kernel/perf_event.c +26 -1
index cab678ed6618..d438f5a46bdc 100644
@@ -39,7 +39,7 @@
  * be supported on any given implementation. Unsupported events will
  * be disabled at run-time based on the PMCEID registers.
  */
-static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
+static unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
      PERF_MAP_ALL_UNSUPPORTED,
      [PERF_COUNT_HW_CPU_CYCLES]              = ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
      [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV8_PMUV3_PERFCTR_INST_RETIRED,
@@ -1222,6 +1222,42 @@ static void armv8_pmu_register_sysctl_table(void)
              register_sysctl("kernel", armv8_pmu_sysctl_table);
 }
 
+static void armv8pmu_fixup_perf_map(struct arm_pmu *cpu_pmu)
+{
+     int i, code;
+     unsigned *map = armv8_pmuv3_perf_map;
+
+     for (i = 0; i < PERF_COUNT_HW_MAX; i++) {
+retry:
+             code = map[i];
+             if (code == HW_OP_UNSUPPORTED)
+                     continue;
+
+             if (test_bit(map[i], cpu_pmu->pmceid_bitmap))
+                     continue;
+             /*
+              * mapping does not exist,
+              * let's see if we can fix it
+              */
+             switch (i) {
+             case PERF_COUNT_HW_BRANCH_INSTRUCTIONS:
+                     if (code == ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED) {
+                             map[i] = ARMV8_PMUV3_PERFCTR_BR_RETIRED;
+                             pr_info("armv8_pmuv3: hwevent "
+                                     "HW_BRANCH_INSTRUCTIONS remapped "
+                                     " from 0x%x to 0x%x\n", code, map[i]);
+                             goto retry;
Quoted 9 lines

arch/arm64/kernel/perf_event.c static void armv8_pmu_register_sysctl_table(void) · line 1253

Quoted 4 lines
arch/arm64/kernel/perf_event.c +4 -0
+                     }
+                     break;
+             default:
+                     pr_info("armv8_pmuv3: hwevent %d not supported\n", i);

If a CPU supports neither ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED nor ARMV8_PMUV3_PERFCTR_BR_RETIRED, won't we get a funny series of messages here? I think I'd prefer to drop the prints altogether.

Ok, let me clean this up.

Quoted 1 line

Will