i40e: Add Inspur Ethernet Connection X722 for 10GbE SFP+ support
Subsystems (2)
PATCH 1/1 i40e: Add Inspur Ethernet Connection X722 for 10GbE SFP+ support
Add support for Inspur Ethernet Connection X722 for 10GbE SFP+ cards. Make possible for the driver to bind to the card.
Testing Hints: no functionality loss for other cards, make sure the device loads
--- drivers/net/ethernet/intel/i40e/i40e_common.c | 1 + drivers/net/ethernet/intel/i40e/i40e_devids.h | 1 + drivers/net/ethernet/intel/i40e/i40e_main.c | 1 + 3 files changed, 3 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_common.c +1 -0
@@ -47,6 +47,7 @@ i40e_status i40e_set_mac_type(struct i40e_hw *hw)case I40E_DEV_ID_1G_BASE_T_X722 :case I40E_DEV_ID_10G_BASE_T_X722 :case I40E_DEV_ID_SFP_I_X722 : +case I40E_DEV_ID_SFP_X722_A : hw->mac.type =I40E_MAC_X722 ;break ;default :
drivers/net/ethernet/intel/i40e/i40e_devids.h +1 -0
@@ -33,6 +33,7 @@#define I40E_DEV_ID_1G_BASE_T_X722 0x37D1#define I40E_DEV_ID_10G_BASE_T_X722 0x37D2#define I40E_DEV_ID_SFP_I_X722 0x37D3 +#define I40E_DEV_ID_SFP_X722_A 0x0DDA#endif /* _I40E_DEVIDS_H_ */
drivers/net/ethernet/intel/i40e/i40e_main.c +1 -0
@@ -77,6 +77,7 @@ static const struct pci_device_id i40e_pci_tbl[] = { {PCI_VDEVICE(INTEL, I40E_DEV_ID_1G_BASE_T_X722), 0}, {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T_X722), 0}, {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_I_X722), 0}, + {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_X722_A), 0}, {PCI_VDEVICE(INTEL, I40E_DEV_ID_20G_KR2), 0}, {PCI_VDEVICE(INTEL, I40E_DEV_ID_20G_KR2_A), 0}, {PCI_VDEVICE(INTEL, I40E_DEV_ID_X710_N3000), 0},
Signature · 1 line
2.27.0
G
PATCH 1/1 i40e: Add Inspur Ethernet Connection X722 for 10GbE SFP+ support
Quoted 18 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Mateusz Palczewski
Sent: Friday, March 25, 2022 3:25 PM
To: intel-wired-lan at lists.osuosl.org
Cc: Palczewski, Mateusz <[email protected]>; Patynowski, PrzemyslawX <[email protected]>
Subject: [Intel-wired-lan] [PATCH net-next v1] i40e: Add Inspur Ethernet Connection X722 for 10GbE SFP+ supportAdd support for Inspur Ethernet Connection X722 for 10GbE SFP+ cards. Make possible for the driver to bind to the card.
Testing Hints: no functionality loss for other cards, make sure the device loads
Quoted 9 lines
Signed-off-by: Przemyslaw Patynowski
<[email protected]>Signed-off-by Mateusz Palczewski <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e_common.c | 1 + drivers/net/ethernet/intel/i40e/i40e_devids.h | 1 + drivers/net/ethernet/intel/i40e/i40e_main.c | 1 + 3 files changed, 3 insertions(+)