5.17.1-rc1 review

This is the start of the stable review cycle for the 5.17.1 release. There are 39 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 27 Mar 2022 15:04:08 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.17.1-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.17.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.17.1-rc1

Arnd Bergmann <[email protected]>
nds32: fix access_ok() checks in get/put_user

Arnd Bergmann <[email protected]>
m68k: fix access_ok for coldfire

Bryan O'Donoghue <[email protected]>

    wcn36xx: Differentiate wcn3660 from wcn3620

James Bottomley <[email protected]>
tpm: use try_get_ops() in tpm-space.c

Lino Sanfilippo <[email protected]>
tpm: fix reference counting for struct tpm_chip

Linus Lüssing <[email protected]>
mac80211: fix potential double free on mesh join

Arnd Bergmann <[email protected]>
uaccess: fix integer overflow on access_ok()

Paul E. McKenney <[email protected]>
rcu: Don't deboost before reporting expedited quiescent state

Ritesh Harjani <[email protected]>
jbd2: fix use-after-free of transaction_t race

Roberto Sassu <[email protected]>
drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()

Brian Norris <[email protected]>

    Revert "ath: add support for special 0x0 regulatory domain"

Ismael Ferreras Morezuelas <[email protected]>
Bluetooth: btusb: Use quirk to skip HCI_FLT_CLEAR_ALL on fake CSR controllers

Ismael Ferreras Morezuelas <[email protected]>
Bluetooth: hci_sync: Add a new quirk to skip HCI_FLT_CLEAR_ALL

Larry Finger <[email protected]>
Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE

Giovanni Cabiddu <[email protected]>
crypto: qat - disable registration of algorithms

Werner Sembach <[email protected]>
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU

Maximilian Luz <[email protected]>
ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3

Mark Cilissen <[email protected]>
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board

Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: validate registers coming from userspace.

Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: initialize registers in nft_do_chain()

Stephane Graber <[email protected]>
drivers: net: xgene: Fix regression in CRC stripping

Giacomo Guiduzzi <[email protected]>
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec

Jonathan Teh <[email protected]>
ALSA: cmipci: Restore aux vol on suspend/resume

Lars-Peter Clausen <[email protected]>
ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB

Takashi Iwai <[email protected]>
ALSA: pcm: Add stream lock during PCM reset ioctl operations

Takashi Iwai <[email protected]>
ALSA: pcm: Fix races among concurrent prealloc proc writes

Takashi Iwai <[email protected]>
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls

Takashi Iwai <[email protected]>
ALSA: pcm: Fix races among concurrent read/write and buffer changes

Takashi Iwai <[email protected]>
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls

Jason Zheng <[email protected]>
ALSA: hda/realtek: Add quirk for ASUS GA402

huangwenhui <[email protected]>
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671

Tim Crawford <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo NP50PNJ

Tim Crawford <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo NP70PNJ

Reza Jahanbakhshi <[email protected]>
ALSA: usb-audio: add mapping for new Corsair Virtuoso SE

Takashi Iwai <[email protected]>
ALSA: oss: Fix PCM OSS buffer allocation overflow

Takashi Iwai <[email protected]>
ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call

Eric Dumazet <[email protected]>
llc: fix netdevice reference leaks in llc_ui_bind()

Helmut Grohne <[email protected]>
Bluetooth: btusb: Add another Realtek 8761BU

Tadeusz Struk <[email protected]>
tpm: Fix error handling in async work

-------------

Diffstat:

 Makefile                                         |  4 +-
 arch/csky/include/asm/uaccess.h                  |  7 +-
 arch/hexagon/include/asm/uaccess.h               | 18 ++---
 arch/m68k/include/asm/uaccess.h                  | 15 ++--
 arch/microblaze/include/asm/uaccess.h            | 19 +----
 arch/nds32/include/asm/uaccess.h                 | 22 ++++--
 arch/x86/kernel/acpi/boot.c                      | 24 ++++++
 drivers/acpi/battery.c                           | 12 +++
 drivers/acpi/video_detect.c                      | 75 ++++++++++++++++++
 drivers/bluetooth/btusb.c                        | 10 ++-
 drivers/char/tpm/tpm-chip.c                      | 46 ++---------
 drivers/char/tpm/tpm-dev-common.c                |  8 +-
 drivers/char/tpm/tpm.h                           |  2 +
 drivers/char/tpm/tpm2-space.c                    | 73 +++++++++++++++++-
 drivers/crypto/qat/qat_4xxx/adf_drv.c            |  7 ++
 drivers/crypto/qat/qat_common/qat_crypto.c       |  7 ++
 drivers/gpu/drm/virtio/virtgpu_gem.c             |  3 +
 drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 12 +--
 drivers/net/wireless/ath/regd.c                  | 10 +--
 drivers/net/wireless/ath/wcn36xx/main.c          |  3 +
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h       |  1 +
 fs/jbd2/transaction.c                            | 41 ++++++----
 include/net/bluetooth/hci.h                      | 10 +++
 include/sound/pcm.h                              |  1 +
 kernel/rcu/tree_plugin.h                         |  8 +-
 net/bluetooth/hci_sync.c                         | 16 ++++
 net/llc/af_llc.c                                 |  8 ++
 net/mac80211/cfg.c                               |  3 -
 net/netfilter/nf_tables_api.c                    | 22 ++++--
 net/netfilter/nf_tables_core.c                   |  2 +-
 sound/core/oss/pcm_oss.c                         | 12 ++-
 sound/core/oss/pcm_plugin.c                      |  5 +-
 sound/core/pcm.c                                 |  2 +
 sound/core/pcm_lib.c                             |  4 +
 sound/core/pcm_memory.c                          | 11 ++-
 sound/core/pcm_native.c                          | 97 +++++++++++++++---------
 sound/pci/ac97/ac97_codec.c                      |  4 +-
 sound/pci/cmipci.c                               |  3 +-
 sound/pci/hda/patch_realtek.c                    |  4 +
 sound/soc/sti/uniperif_player.c                  |  6 +-
 sound/soc/sti/uniperif_reader.c                  |  2 +-
 sound/usb/mixer_maps.c                           | 10 +++
 sound/usb/mixer_quirks.c                         |  7 +-
 43 files changed, 475 insertions(+), 181 deletions(-)

From: Tadeusz Struk <[email protected]>

commit 2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream.

When an invalid (non existing) handle is used in a TPM command, that uses the resource manager interface (/dev/tpmrm0) the resource manager tries to load it from its internal cache, but fails and the tpm_dev_transmit returns an -EINVAL error to the caller. The existing async handler doesn't handle these error cases currently and the condition in the poll handler never returns mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions returned from tpm_dev_transmit they are also reflected in the poll mask and a correct error code could passed back to the caller.

---
 drivers/char/tpm/tpm-dev-common.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -69,7 +69,13 @@ static void tpm_dev_async_work(struct wo
 	ret = tpm_dev_transmit(priv->chip, priv->space, priv->data_buffer,
 			       sizeof(priv->data_buffer));
 	tpm_put_ops(priv->chip);
-	if (ret > 0) {
+
+	/*
+	 * If ret is > 0 then tpm_dev_transmit returned the size of the
+	 * response. If ret is < 0 then tpm_dev_transmit failed and
+	 * returned an error code.
+	 */
+	if (ret != 0) {
 		priv->response_length = ret;
 		mod_timer(&priv->user_read_timer, jiffies + (120 * HZ));
 	}

From: Helmut Grohne <[email protected]>

commit 6dfbe29f45fb0bde29213dbd754a79e8bfc6ecef upstream.

This device is sometimes wrapped with a label "EDUP".

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2550 ProdID=8761 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -482,6 +482,8 @@ static const struct usb_device_id blackl
 	/* Additional Realtek 8761BU Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
 	  					     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },

From: Eric Dumazet <[email protected]>

commit 764f4eb6846f5475f1244767d24d25dd86528a4a upstream.

Whenever llc_ui_bind() and/or llc_ui_autobind() took a reference on a netdevice but subsequently fail, they must properly release their reference
or risk the infamous message from unregister_netdevice() at device dismantle.

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

---
 net/llc/af_llc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -311,6 +311,10 @@ static int llc_ui_autobind(struct socket
 	sock_reset_flag(sk, SOCK_ZAPPED);
 	rc = 0;
 out:
+	if (rc) {
+		dev_put_track(llc->dev, &llc->dev_tracker);
+		llc->dev = NULL;
+	}
 	return rc;
 }
 

@@ -408,6 +412,10 @@ static int llc_ui_bind(struct socket *so
 out_put:
 	llc_sap_put(sap);
 out:
+	if (rc) {
+		dev_put_track(llc->dev, &llc->dev_tracker);
+		llc->dev = NULL;
+	}
 	release_sock(sk);
 	return rc;
 }

From: Takashi Iwai <[email protected]>

commit 455c5653f50e10b4f460ef24e99f0044fbe3401c upstream.

This is essentially a revert of the commit dc865fb9e7c2 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual snd_pcm_stop() calls with snd_pcm_stop_xrun().

The commit above introduced a deadlock as snd_pcm_stop_xrun() itself takes the PCM stream lock while the caller already holds it. Since the conversion was done only for consistency reason and the open-call with snd_pcm_stop() to the XRUN state is a correct usage, let's revert the commit back as the fix.

---
 sound/soc/sti/uniperif_player.c |    6 +++---
 sound/soc/sti/uniperif_reader.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

@@ -91,7 +91,7 @@ static irqreturn_t uni_player_irq_handle
 			SET_UNIPERIF_ITM_BCLR_FIFO_ERROR(player);
 
 			/* Stop the player */
-			snd_pcm_stop_xrun(player->substream);
+			snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN);
 		}
 
 		ret = IRQ_HANDLED;

@@ -105,7 +105,7 @@ static irqreturn_t uni_player_irq_handle
 		SET_UNIPERIF_ITM_BCLR_DMA_ERROR(player);
 
 		/* Stop the player */
-		snd_pcm_stop_xrun(player->substream);
+		snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN);
 
 		ret = IRQ_HANDLED;
 	}

@@ -138,7 +138,7 @@ static irqreturn_t uni_player_irq_handle
 		dev_err(player->dev, "Underflow recovery failed\n");
 
 		/* Stop the player */
-		snd_pcm_stop_xrun(player->substream);
+		snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN);
 
 		ret = IRQ_HANDLED;
 	}

@@ -65,7 +65,7 @@ static irqreturn_t uni_reader_irq_handle
 	if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
 		dev_err(reader->dev, "FIFO error detected\n");
 
-		snd_pcm_stop_xrun(reader->substream);
+		snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
 
 		ret = IRQ_HANDLED;
 	}

From: Takashi Iwai <[email protected]>

commit efb6402c3c4a7c26d97c92d70186424097b6e366 upstream.

We've got syzbot reports hitting INT_MAX overflow at vmalloc() allocation that is called from snd_pcm_plug_alloc(). Although we apply the restrictions to input parameters, it's based only on the hw_params of the underlying PCM device. Since the PCM OSS layer allocates a temporary buffer for the data conversion, the size may become unexpectedly large when more channels or higher rates is given; in the reported case, it went over INT_MAX, hence it hits WARN_ON().

This patch is an attempt to avoid such an overflow and an allocation for too large buffers. First off, it adds the limit of 1MB as the upper bound for period bytes. This must be large enough for all use cases, and we really don't want to handle a larger temporary buffer than this size. The size check is performed at two places, where the original period bytes is calculated and where the plugin buffer size is calculated.

In addition, the driver uses array_size() and array3_size() for multiplications to catch overflows for the converted period size and buffer bytes.

---
 sound/core/oss/pcm_oss.c    |   12 ++++++++----
 sound/core/oss/pcm_plugin.c |    5 ++++-
 2 files changed, 12 insertions(+), 5 deletions(-)

@@ -774,6 +774,11 @@ static int snd_pcm_oss_period_size(struc
 
 	if (oss_period_size < 16)
 		return -EINVAL;
+
+	/* don't allocate too large period; 1MB period must be enough */
+	if (oss_period_size > 1024 * 1024)
+		return -ENOMEM;
+
 	runtime->oss.period_bytes = oss_period_size;
 	runtime->oss.period_frames = 1;
 	runtime->oss.periods = oss_periods;

@@ -1043,10 +1048,9 @@ static int snd_pcm_oss_change_params_loc
 			goto failure;
 	}
 #endif
-	oss_period_size *= oss_frame_size;
-
-	oss_buffer_size = oss_period_size * runtime->oss.periods;
-	if (oss_buffer_size < 0) {
+	oss_period_size = array_size(oss_period_size, oss_frame_size);
+	oss_buffer_size = array_size(oss_period_size, runtime->oss.periods);
+	if (oss_buffer_size <= 0) {
 		err = -EINVAL;
 		goto failure;
 	}

@@ -62,7 +62,10 @@ static int snd_pcm_plugin_alloc(struct s
 	width = snd_pcm_format_physical_width(format->format);
 	if (width < 0)
 		return width;
-	size = frames * format->channels * width;
+	size = array3_size(frames, format->channels, width);
+	/* check for too large period size once again */
+	if (size > 1024 * 1024)
+		return -ENOMEM;
 	if (snd_BUG_ON(size % 8))
 		return -ENXIO;
 	size /= 8;

From: Reza Jahanbakhshi <[email protected]>

commit cd94df1795418056a19ff4cb44eadfc18ac99a57 upstream.

New device id for Corsair Virtuoso SE RGB Wireless that currently is not in the mixer_map. This entry in the mixer_map is necessary in order to label its mixer appropriately and allow userspace to pick the correct volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless headset has this new ID and consequently, the sidetone and volume are not
working correctly without this change.

Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
idVendor 0x1b1c Corsair
iManufacturer 1 Corsair
iProduct 2 CORSAIR VIRTUOSO SE Wireless Gaming Headset

---
 sound/usb/mixer_maps.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -543,6 +543,16 @@ static const struct usbmix_ctl_map usbmi
 		.map = bose_soundlink_map,
 	},
 	{
+		/* Corsair Virtuoso SE Latest (wired mode) */
+		.id = USB_ID(0x1b1c, 0x0a3f),
+		.map = corsair_virtuoso_map,
+	},
+	{
+		/* Corsair Virtuoso SE Latest (wireless mode) */
+		.id = USB_ID(0x1b1c, 0x0a40),
+		.map = corsair_virtuoso_map,
+	},
+	{
 		/* Corsair Virtuoso SE (wired mode) */
 		.id = USB_ID(0x1b1c, 0x0a3d),
 		.map = corsair_virtuoso_map,

From: Tim Crawford <[email protected]>

commit 0c20fce13e6e111463e3a15ce3cf6713fe518388 upstream.

Fixes headset detection on Clevo NP70PNJ.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -9103,6 +9103,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8561, "Clevo NH[57][0-9][ER][ACDH]Q", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME),
 	SND_PCI_QUIRK(0x1558, 0x8a20, "Clevo NH55DCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),

From: Tim Crawford <[email protected]>

commit 9cb727506704b5323998047789fc871e64a6aa14 upstream.

Fixes headset detection on Clevo NP50PNJ.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -9103,6 +9103,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8561, "Clevo NH[57][0-9][ER][ACDH]Q", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x866d, "Clevo NP5[05]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME),

From: huangwenhui <[email protected]>

commit 882bd07f564f97fca6e42ce6ce627ce24ce1ef5a upstream.

On a HP 288 Pro G8, the front mic could not be detected.In order to get it working, the pin configuration needs to be set correctly, and the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -11069,6 +11069,7 @@ static const struct snd_pci_quirk alc662
 	SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
 	SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
+	SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2),
 	SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
 	SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),
 	SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50),

From: Jason Zheng <[email protected]>

commit b7557267c233b55d8e8d7ba4c68cf944fe2ec02c upstream.

ASUS GA402 requires a workaround to manage the routing of its 4 speakers like the other ASUS models. Add a corresponding quirk entry to fix it.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -9020,6 +9020,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
+	SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),

From: Takashi Iwai <[email protected]>

commit 92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream.

Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls.

This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity.

---
 include/sound/pcm.h     |    1 
 sound/core/pcm.c        |    2 +
 sound/core/pcm_native.c |   61 ++++++++++++++++++++++++++++++------------------
 3 files changed, 42 insertions(+), 22 deletions(-)

@@ -401,6 +401,7 @@ struct snd_pcm_runtime {
 	wait_queue_head_t tsleep;	/* transfer sleep */
 	struct fasync_struct *fasync;
 	bool stop_operating;		/* sync_stop will be called */
+	struct mutex buffer_mutex;	/* protect for buffer changes */
 
 	/* -- private section -- */
 	void *private_data;

@@ -969,6 +969,7 @@ int snd_pcm_attach_substream(struct snd_
 	init_waitqueue_head(&runtime->tsleep);
 
 	runtime->status->state = SNDRV_PCM_STATE_OPEN;
+	mutex_init(&runtime->buffer_mutex);
 
 	substream->runtime = runtime;
 	substream->private_data = pcm->private_data;

@@ -1002,6 +1003,7 @@ void snd_pcm_detach_substream(struct snd
 	} else {
 		substream->runtime = NULL;
 	}
+	mutex_destroy(&runtime->buffer_mutex);
 	kfree(runtime);
 	put_pid(substream->pid);
 	substream->pid = NULL;

From: Takashi Iwai <[email protected]>

commit dca947d4d26dbf925a64a6cfb2ddbc035e831a3d upstream.

In the current PCM design, the read/write syscalls (as well as the equivalent ioctls) are allowed before the PCM stream is running, that is, at PCM PREPARED state. Meanwhile, we also allow to re-issue hw_params and hw_free ioctl calls at the PREPARED state that may change or free the buffers, too. The problem is that there is no protection against those mix-ups.

This patch applies the previously introduced runtime->buffer_mutex to the read/write operations so that the concurrent hw_params or hw_free call can no longer interfere during the operation. The mutex is unlocked before scheduling, so we don't take it too long.

---
 sound/core/pcm_lib.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -1906,9 +1906,11 @@ static int wait_for_avail(struct snd_pcm
 		if (avail >= runtime->twake)
 			break;
 		snd_pcm_stream_unlock_irq(substream);
+		mutex_unlock(&runtime->buffer_mutex);
 
 		tout = schedule_timeout(wait_time);
 
+		mutex_lock(&runtime->buffer_mutex);
 		snd_pcm_stream_lock_irq(substream);
 		set_current_state(TASK_INTERRUPTIBLE);
 		switch (runtime->status->state) {

@@ -2219,6 +2221,7 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 
 	nonblock = !!(substream->f_flags & O_NONBLOCK);
 
+	mutex_lock(&runtime->buffer_mutex);
 	snd_pcm_stream_lock_irq(substream);
 	err = pcm_accessible_state(runtime);
 	if (err < 0)

@@ -2310,6 +2313,7 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 	if (xfer > 0 && err >= 0)
 		snd_pcm_update_state(substream, runtime);
 	snd_pcm_stream_unlock_irq(substream);
+	mutex_unlock(&runtime->buffer_mutex);
 	return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
 }
 EXPORT_SYMBOL(__snd_pcm_lib_xfer);

From: Takashi Iwai <[email protected]>

commit 3c3201f8c7bb77eb53b08a3ca8d9a4ddc500b4c0 upstream.

Like the previous fixes to hw_params and hw_free ioctl races, we need to paper over the concurrent prepare ioctl calls against hw_params and hw_free, too.

This patch implements the locking with the existing runtime->buffer_mutex for prepare ioctls. Unlike the previous case for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is performed to the linked streams, hence the lock can't be applied simply on the top. For tracking the lock in each linked substream, we modify snd_pcm_action_group() slightly and apply the buffer_mutex for the case stream_lock=false (formerly there was no lock applied) there.

---
 sound/core/pcm_native.c |   32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

@@ -1190,15 +1190,17 @@ struct action_ops {
 static int snd_pcm_action_group(const struct action_ops *ops,
 				struct snd_pcm_substream *substream,
 				snd_pcm_state_t state,
-				bool do_lock)
+				bool stream_lock)
 {
 	struct snd_pcm_substream *s = NULL;
 	struct snd_pcm_substream *s1;
 	int res = 0, depth = 1;
 
 	snd_pcm_group_for_each_entry(s, substream) {
-		if (do_lock && s != substream) {
-			if (s->pcm->nonatomic)
+		if (s != substream) {
+			if (!stream_lock)
+				mutex_lock_nested(&s->runtime->buffer_mutex, depth);
+			else if (s->pcm->nonatomic)
 				mutex_lock_nested(&s->self_group.mutex, depth);
 			else
 				spin_lock_nested(&s->self_group.lock, depth);

@@ -1226,18 +1228,18 @@ static int snd_pcm_action_group(const st
 		ops->post_action(s, state);
 	}
  _unlock:
-	if (do_lock) {
-		/* unlock streams */
-		snd_pcm_group_for_each_entry(s1, substream) {
-			if (s1 != substream) {
-				if (s1->pcm->nonatomic)
-					mutex_unlock(&s1->self_group.mutex);
-				else
-					spin_unlock(&s1->self_group.lock);
-			}
-			if (s1 == s)	/* end */
-				break;
+	/* unlock streams */
+	snd_pcm_group_for_each_entry(s1, substream) {
+		if (s1 != substream) {
+			if (!stream_lock)
+				mutex_unlock(&s1->runtime->buffer_mutex);
+			else if (s1->pcm->nonatomic)
+				mutex_unlock(&s1->self_group.mutex);
+			else
+				spin_unlock(&s1->self_group.lock);
 		}
+		if (s1 == s)	/* end */
+			break;
 	}
 	return res;
 }

@@ -1367,10 +1369,12 @@ static int snd_pcm_action_nonatomic(cons
 
 	/* Guarantee the group members won't change during non-atomic action */
 	down_read(&snd_pcm_link_rwsem);
+	mutex_lock(&substream->runtime->buffer_mutex);
 	if (snd_pcm_stream_linked(substream))
 		res = snd_pcm_action_group(ops, substream, state, false);
 	else
 		res = snd_pcm_action_single(ops, substream, state);
+	mutex_unlock(&substream->runtime->buffer_mutex);
 	up_read(&snd_pcm_link_rwsem);
 	return res;
 }

From: Takashi Iwai <[email protected]>

commit 69534c48ba8ce552ce383b3dfdb271ffe51820c3 upstream.

We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

---
 sound/core/pcm_memory.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

@@ -163,19 +163,20 @@ static void snd_pcm_lib_preallocate_proc
 	size_t size;
 	struct snd_dma_buffer new_dmab;
 
+	mutex_lock(&substream->pcm->open_mutex);
 	if (substream->runtime) {
 		buffer->error = -EBUSY;
-		return;
+		goto unlock;
 	}
 	if (!snd_info_get_line(buffer, line, sizeof(line))) {
 		snd_info_get_str(str, line, sizeof(str));
 		size = simple_strtoul(str, NULL, 10) * 1024;
 		if ((size != 0 && size < 8192) || size > substream->dma_max) {
 			buffer->error = -EINVAL;
-			return;
+			goto unlock;
 		}
 		if (substream->dma_buffer.bytes == size)
-			return;
+			goto unlock;
 		memset(&new_dmab, 0, sizeof(new_dmab));
 		new_dmab.dev = substream->dma_buffer.dev;
 		if (size > 0) {

@@ -189,7 +190,7 @@ static void snd_pcm_lib_preallocate_proc
 					 substream->pcm->card->number, substream->pcm->device,
 					 substream->stream ? 'c' : 'p', substream->number,
 					 substream->pcm->name, size);
-				return;
+				goto unlock;
 			}
 			substream->buffer_bytes_max = size;
 		} else {

@@ -201,6 +202,8 @@ static void snd_pcm_lib_preallocate_proc
 	} else {
 		buffer->error = -EINVAL;
 	}
+ unlock:
+	mutex_unlock(&substream->pcm->open_mutex);
 }
 
 static inline void preallocate_info_init(struct snd_pcm_substream *substream)

From: Takashi Iwai <[email protected]>

commit 1f68915b2efd0d6bfd6e124aa63c94b3c69f127c upstream.

snd_pcm_reset() is a non-atomic operation, and it's allowed to run during the PCM stream running. It implies that the manipulation of hw_ptr and other parameters might be racy.

This patch adds the PCM stream lock at appropriate places in snd_pcm_*_reset() actions for covering that.

---
 sound/core/pcm_native.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -1864,11 +1864,13 @@ static int snd_pcm_do_reset(struct snd_p
 	int err = snd_pcm_ops_ioctl(substream, SNDRV_PCM_IOCTL1_RESET, NULL);
 	if (err < 0)
 		return err;
+	snd_pcm_stream_lock_irq(substream);
 	runtime->hw_ptr_base = 0;
 	runtime->hw_ptr_interrupt = runtime->status->hw_ptr -
 		runtime->status->hw_ptr % runtime->period_size;
 	runtime->silence_start = runtime->status->hw_ptr;
 	runtime->silence_filled = 0;
+	snd_pcm_stream_unlock_irq(substream);
 	return 0;
 }
 

@@ -1876,10 +1878,12 @@ static void snd_pcm_post_reset(struct sn
 			       snd_pcm_state_t state)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
+	snd_pcm_stream_lock_irq(substream);
 	runtime->control->appl_ptr = runtime->status->hw_ptr;
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, ULONG_MAX);
+	snd_pcm_stream_unlock_irq(substream);
 }
 
 static const struct action_ops snd_pcm_action_reset = {

From: Lars-Peter Clausen <[email protected]>

commit 0f306cca42fe879694fb5e2382748c43dc9e0196 upstream.

For the RODE NT-USB the lowest Playback mixer volume setting mutes the audio output. But it is not reported as such causing e.g. PulseAudio to accidentally mute the device when selecting a low volume.

Fix this by applying the existing quirk for this kind of issue when the device is detected.

---
 sound/usb/mixer_quirks.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

@@ -3360,9 +3360,10 @@ void snd_usb_mixer_fu_apply_quirk(struct
 		if (unitid == 7 && cval->control == UAC_FU_VOLUME)
 			snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
 		break;
-	/* lowest playback value is muted on C-Media devices */
-	case USB_ID(0x0d8c, 0x000c):
-	case USB_ID(0x0d8c, 0x0014):
+	/* lowest playback value is muted on some devices */
+	case USB_ID(0x0d8c, 0x000c): /* C-Media */
+	case USB_ID(0x0d8c, 0x0014): /* C-Media */
+	case USB_ID(0x19f7, 0x0003): /* RODE NT-USB */
 		if (strstr(kctl->id.name, "Playback"))
 			cval->min_mute = 1;
 		break;

From: Jonathan Teh <[email protected]>

commit c14231cc04337c2c2a937db084af342ce704dbde upstream.

Save and restore CM_REG_AUX_VOL instead of register 0x24 twice on suspend/resume.

Tested on CMI8738LX.

---
 sound/pci/cmipci.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -298,7 +298,6 @@ MODULE_PARM_DESC(joystick_port, "Joystic
 #define CM_MICGAINZ		0x01	/* mic boost */
 #define CM_MICGAINZ_SHIFT	0
 
-#define CM_REG_MIXER3		0x24
 #define CM_REG_AUX_VOL		0x26
 #define CM_VAUXL_MASK		0xf0
 #define CM_VAUXR_MASK		0x0f

@@ -3265,7 +3264,7 @@ static int snd_cmipci_probe(struct pci_d
  */
 static const unsigned char saved_regs[] = {
 	CM_REG_FUNCTRL1, CM_REG_CHFORMAT, CM_REG_LEGACY_CTRL, CM_REG_MISC_CTRL,
-	CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_MIXER3, CM_REG_PLL,
+	CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_AUX_VOL, CM_REG_PLL,
 	CM_REG_CH0_FRAME1, CM_REG_CH0_FRAME2,
 	CM_REG_CH1_FRAME1, CM_REG_CH1_FRAME2, CM_REG_EXT_MISC,
 	CM_REG_INT_STATUS, CM_REG_INT_HLDCLR, CM_REG_FUNCTRL0,

From: Giacomo Guiduzzi <[email protected]>

commit 17aaf0193392cb3451bf0ac75ba396ec4cbded6e upstream.

Tests 72 and 78 for ALSA in kselftest fail due to reading inconsistent values from some devices on a VirtualBox Virtual Machine using the snd_intel8x0 driver for the AC'97 Audio Controller device.
Taking for example test number 72, this is what the test reports:
"Surround Playback Volume.0 expected 1 but read 0, is_volatile 0" "Surround Playback Volume.1 expected 0 but read 1, is_volatile 0" These errors repeat for each value from 0 to 31.

Taking a look at these error messages it is possible to notice that the written values are read back swapped.
When the write is performed, these values are initially stored in an array used to sanity-check them and write them in the pcmreg array. To write them, the two one-byte values are packed together in a two-byte variable through bitwise operations: the first value is shifted left by one byte and the second value is stored in the right byte through a bitwise OR. When reading the values back, right shifts are performed to retrieve the previously stored bytes. These shifts are executed in the wrong order, thus reporting the values swapped as shown above.

This patch fixes this mistake by reversing the read operations' order.

---
 sound/pci/ac97/ac97_codec.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -938,8 +938,8 @@ static int snd_ac97_ad18xx_pcm_get_volum
 	int codec = kcontrol->private_value & 3;
 	
 	mutex_lock(&ac97->page_mutex);
-	ucontrol->value.integer.value[0] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 0) & 31);
-	ucontrol->value.integer.value[1] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 8) & 31);
+	ucontrol->value.integer.value[0] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 8) & 31);
+	ucontrol->value.integer.value[1] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 0) & 31);
 	mutex_unlock(&ac97->page_mutex);
 	return 0;
 }

From: Stephane Graber <[email protected]>

commit e9e6faeafaa00da1851bcf47912b0f1acae666b4 upstream.

All packets on ingress (except for jumbo) are terminated with a 4-bytes CRC checksum. It's the responsability of the driver to strip those 4 bytes. Unfortunately a change dating back to March 2017 re-shuffled some code and made the CRC stripping code effectively dead.

This change re-orders that part a bit such that the datalen is immediately altered if needed.

---
 drivers/net/ethernet/apm/xgene/xgene_enet_main.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

@@ -696,6 +696,12 @@ static int xgene_enet_rx_frame(struct xg
 	buf_pool->rx_skb[skb_index] = NULL;
 
 	datalen = xgene_enet_get_data_len(le64_to_cpu(raw_desc->m1));
+
+	/* strip off CRC as HW isn't doing this */
+	nv = GET_VAL(NV, le64_to_cpu(raw_desc->m0));
+	if (!nv)
+		datalen -= 4;
+
 	skb_put(skb, datalen);
 	prefetch(skb->data - NET_IP_ALIGN);
 	skb->protocol = eth_type_trans(skb, ndev);

@@ -717,12 +723,8 @@ static int xgene_enet_rx_frame(struct xg
 		}
 	}
 
-	nv = GET_VAL(NV, le64_to_cpu(raw_desc->m0));
-	if (!nv) {
-		/* strip off CRC as HW isn't doing this */
-		datalen -= 4;
+	if (!nv)
 		goto skip_jumbo;
-	}
 
 	slots = page_pool->slots - 1;
 	head = page_pool->head;

From: Pablo Neira Ayuso <[email protected]>

commit 4c905f6740a365464e91467aa50916555b28213d upstream.

Initialize registers to avoid stack leak into userspace.

---
 net/netfilter/nf_tables_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -201,7 +201,7 @@ nft_do_chain(struct nft_pktinfo *pkt, vo
 	const struct nft_rule_dp *rule, *last_rule;
 	const struct net *net = nft_net(pkt);
 	const struct nft_expr *expr, *last;
-	struct nft_regs regs;
+	struct nft_regs regs = {};
 	unsigned int stackptr = 0;
 	struct nft_jumpstack jumpstack[NFT_JUMP_STACK_SIZE];
 	bool genbit = READ_ONCE(net->nft.gencursor);

From: Pablo Neira Ayuso <[email protected]>

commit 6e1acfa387b9ff82cfc7db8cc3b6959221a95851 upstream.

Bail out in case userspace uses unsupported registers.

---
 net/netfilter/nf_tables_api.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

@@ -9275,17 +9275,23 @@ int nft_parse_u32_check(const struct nla
 }
 EXPORT_SYMBOL_GPL(nft_parse_u32_check);
 
-static unsigned int nft_parse_register(const struct nlattr *attr)
+static unsigned int nft_parse_register(const struct nlattr *attr, u32 *preg)
 {
 	unsigned int reg;
 
 	reg = ntohl(nla_get_be32(attr));
 	switch (reg) {
 	case NFT_REG_VERDICT...NFT_REG_4:
-		return reg * NFT_REG_SIZE / NFT_REG32_SIZE;
+		*preg = reg * NFT_REG_SIZE / NFT_REG32_SIZE;
+		break;
+	case NFT_REG32_00...NFT_REG32_15:
+		*preg = reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00;
+		break;
 	default:
-		return reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00;
+		return -ERANGE;
 	}
+
+	return 0;
 }
 
 /**

@@ -9327,7 +9333,10 @@ int nft_parse_register_load(const struct
 	u32 reg;
 	int err;
 
-	reg = nft_parse_register(attr);
+	err = nft_parse_register(attr, &reg);
+	if (err < 0)
+		return err;
+
 	err = nft_validate_register_load(reg, len);
 	if (err < 0)
 		return err;

@@ -9382,7 +9391,10 @@ int nft_parse_register_store(const struc
 	int err;
 	u32 reg;
 
-	reg = nft_parse_register(attr);
+	err = nft_parse_register(attr, &reg);
+	if (err < 0)
+		return err;
+
 	err = nft_validate_register_store(ctx, reg, data, type, len);
 	if (err < 0)
 		return err;

From: Mark Cilissen <[email protected]>

commit e702196bf85778f2c5527ca47f33ef2e2fca8297 upstream.

On this board the ACPI RSDP structure points to both a RSDT and an XSDT, but the XSDT points to a truncated FADT. This causes all sorts of trouble and usually a complete failure to boot after the following error occurs:

ACPI Error: Unsupported address space: 0x20 (*/hwregs-*) ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*)
ACPI: Unable to start ACPI Interpreter

This leaves the ACPI implementation in such a broken state that subsequent kernel subsystem initialisations go wrong, resulting in among others mismapped PCI memory, SATA and USB enumeration failures, and freezes.

As this is an older embedded platform that will likely never see any BIOS updates to address this issue and its default shipping OS only complies to ACPI 1.0, work around this by forcing acpi=rsdt. This patch, applied on top of Linux 5.10.102, was confirmed on real hardware to fix the issue.

---
 arch/x86/kernel/acpi/boot.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

@@ -1328,6 +1328,17 @@ static int __init disable_acpi_pci(const
 	return 0;
 }
 
+static int __init disable_acpi_xsdt(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: force use of acpi=rsdt\n", d->ident);
+		acpi_gbl_do_not_use_xsdt = TRUE;
+	} else {
+		pr_notice("Warning: DMI blacklist says broken, but acpi XSDT forced\n");
+	}
+	return 0;
+}
+
 static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 {
 	if (!acpi_force) {

@@ -1451,6 +1462,19 @@ static const struct dmi_system_id acpi_d
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	/*
+	 * Boxes that need ACPI XSDT use disabled due to corrupted tables
+	 */
+	{
+	 .callback = disable_acpi_xsdt,
+	 .ident = "Advantech DAC-BJ01",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Bearlake CRB Board"),
+		     DMI_MATCH(DMI_BIOS_VERSION, "V1.12"),
+		     DMI_MATCH(DMI_BIOS_DATE, "02/01/2011"),
+		     },
+	 },
 	{}
 };
 

From: Maximilian Luz <[email protected]>

commit 7dacee0b9efc8bd061f097b1a8d4daa6591af0c6 upstream.

For some reason, the Microsoft Surface Go 3 uses the standard ACPI interface for battery information, but does not use the standard PNP0C0A HID. Instead it uses MSHW0146 as identifier. Add that ID to the driver as this seems to work well.

Additionally, the power state is not updated immediately after the AC has been (un-)plugged, so add the respective quirk for that.

---
 drivers/acpi/battery.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

@@ -59,6 +59,10 @@ MODULE_PARM_DESC(cache_time, "cache time
 
 static const struct acpi_device_id battery_device_ids[] = {
 	{"PNP0C0A", 0},
+
+	/* Microsoft Surface Go 3 */
+	{"MSHW0146", 0},
+
 	{"", 0},
 };
 

@@ -1148,6 +1152,14 @@ static const struct dmi_system_id bat_dm
 			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
 		},
 	},
+	{
+		/* Microsoft Surface Go 3 */
+		.callback = battery_notification_delay_quirk,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"),
+		},
+	},
 	{},
 };
 

From: Werner Sembach <[email protected]>

commit c844d22fe0c0b37dc809adbdde6ceb6462c43acf upstream.

Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working native and video interface. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process.

---
 drivers/acpi/video_detect.c |   75 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

@@ -415,6 +415,81 @@ static const struct dmi_system_id video_
 		DMI_MATCH(DMI_PRODUCT_NAME, "GA503"),
 		},
 	},
+	/*
+	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
+	 * working native and video interface. However the default detection
+	 * mechanism first registers the video interface before unregistering
+	 * it again and switching to the native interface during boot. This
+	 * results in a dangling SBIOS request for backlight change for some
+	 * reason, causing the backlight to switch to ~2% once per boot on the
+	 * first power cord connect or disconnect event. Setting the native
+	 * interface explicitly circumvents this buggy behaviour, by avoiding
+	 * the unregistering process.
+	 */
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xRU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xNU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xNU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+	},
+	{
+	.callback = video_detect_force_native,
+	.ident = "Clevo NL5xNU",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+		},
+	},
 
 	/*
 	 * Desktops which falsely report a backlight and which our heuristics

From: Giovanni Cabiddu <[email protected]>

commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream.

The implementations of aead and skcipher in the QAT driver do not support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver returns -EBUSY but does not enqueue the request.
This can result in applications like dm-crypt waiting indefinitely for a completion of a request that was never submitted to the hardware.

To avoid this problem, disable the registration of all crypto algorithms in the QAT driver by setting the number of crypto instances to 0 at configuration time.

---
 drivers/crypto/qat/qat_4xxx/adf_drv.c      |    7 +++++++
 drivers/crypto/qat/qat_common/qat_crypto.c |    7 +++++++
 2 files changed, 14 insertions(+)

@@ -75,6 +75,13 @@ static int adf_crypto_dev_config(struct
 	if (ret)
 		goto err;
 
+	/* Temporarily set the number of crypto instances to zero to avoid
+	 * registering the crypto algorithms.
+	 * This will be removed when the algorithms will support the
+	 * CRYPTO_TFM_REQ_MAY_BACKLOG flag
+	 */
+	instances = 0;
+
 	for (i = 0; i < instances; i++) {
 		val = i;
 		bank = i * 2;

@@ -161,6 +161,13 @@ int qat_crypto_dev_config(struct adf_acc
 	if (ret)
 		goto err;
 
+	/* Temporarily set the number of crypto instances to zero to avoid
+	 * registering the crypto algorithms.
+	 * This will be removed when the algorithms will support the
+	 * CRYPTO_TFM_REQ_MAY_BACKLOG flag
+	 */
+	instances = 0;
+
 	for (i = 0; i < instances; i++) {
 		val = i;
 		snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_BANK_NUM, i);

From: Larry Finger <[email protected]>

commit 2e7b4a328ed6ea57d22853939e69bc86c560996d upstream.

This Realtek device has both wifi and BT components. The latter reports a USB ID of 0bda:2852, which is not in the table.

BT device description in /sys/kernel/debug/usb/devices contains the following entries:

T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=2852 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

The missing USB_ID was reported by user trius65 at https://github.com/lwfinger/rtw89/issues/122

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -405,6 +405,8 @@ static const struct usb_device_id blackl
 						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek 8852AE Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK |

From: Ismael Ferreras Morezuelas <[email protected]>

commit 0eaecfb2e4814d51ab172df3823e35d7c488b6d2 upstream.

Some controllers have problems with being sent a command to clear all filtering. While the HCI code does not unconditionally send a clear-all anymore at BR/EDR setup (after the state machine refactor), there might be more ways of hitting these codepaths in the future as the kernel develops.

---
 include/net/bluetooth/hci.h |   10 ++++++++++
 net/bluetooth/hci_sync.c    |   16 ++++++++++++++++
 2 files changed, 26 insertions(+)

@@ -255,6 +255,16 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER,
+
+	/* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with
+	 * HCI_FLT_CLEAR_ALL are ignored and event filtering is
+	 * completely avoided. A subset of the CSR controller
+	 * clones struggle with this and instantly lock up.
+	 *
+	 * Note that devices using this must (separately) disable
+	 * runtime suspend, because event filtering takes place there.
+	 */
+	HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL,
 };
 
 /* HCI device flags */

@@ -2806,6 +2806,9 @@ static int hci_set_event_filter_sync(str
 	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
 		return 0;
 
+	if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+		return 0;
+
 	memset(&cp, 0, sizeof(cp));
 	cp.flt_type = flt_type;
 

@@ -2826,6 +2829,13 @@ static int hci_clear_event_filter_sync(s
 	if (!hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED))
 		return 0;
 
+	/* In theory the state machine should not reach here unless
+	 * a hci_set_event_filter_sync() call succeeds, but we do
+	 * the check both for parity and as a future reminder.
+	 */
+	if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+		return 0;
+
 	return hci_set_event_filter_sync(hdev, HCI_FLT_CLEAR_ALL, 0x00,
 					 BDADDR_ANY, 0x00);
 }

@@ -4825,6 +4835,12 @@ static int hci_update_event_filter_sync(
 	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
 		return 0;
 
+	/* Some fake CSR controllers lock up after setting this type of
+	 * filter, so avoid sending the request altogether.
+	 */
+	if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+		return 0;
+
 	/* Always clear event filter when starting */
 	hci_clear_event_filter_sync(hdev);
 

From: Ismael Ferreras Morezuelas <[email protected]>

commit b3cf94c8b6b2f1a2b94825a025db291da2b151fd upstream.

Another subset of the more recent batch of Chinese clones aren't specs-compliant and seem to lock up whenever they receive a HCI_OP_SET_EVENT_FLT with flt_type set to zero/HCI_FLT_CLEAR_ALL, which on Linux (until the recent HCI state-machine refactor) happened right at BR/EDR setup. As there are other less-straightforward ways of reaching those operations, this patch is still relevant.

So, while all the previous efforts to wrangle the herd of fake CSRs seem to be paying off (and these also get detected as such) we still need to take care of this quirk; testers seem to agree that these dongles tend to work well enough afterwards.

that driver doesn't appear to use this clear-all functionality at all.

This patch was tested on some really popular AliExpress-style dongles, in my case marked as "V5.0". Chip markings: UG8413, the backside of the PCB says "USB Dangel" (sic).

Here is the hciconfig -a output; for completeness:

hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:7X:XX ACL MTU: 679:8 SCO MTU: 48:16 UP RUNNING PSCAN ISCAN
Features: 0xbf 0x3e 0x4d 0xfa 0xdb 0x3d 0x7b 0xc7
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: PERIPHERAL ACCEPT
Name: 'CSR8510 A10.'
Class: 0x7c0104
Service Classes: Rendering, Capturing, Object Transfer, Audio, Telephony Device Class: Computer, Desktop workstation
HCI Version: 4.0 (0x6) Revision: 0x3120
LMP Version: 4.0 (0x6) Subversion: 0x22bb
Manufacturer: Cambridge Silicon Radio (10)

As well as the lsusb -vv -d 0a12:0001:

ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a12 Cambridge Silicon Radio, Ltd
idProduct 0x0001 Bluetooth Dongle (HCI mode)
bcdDevice 88.91

  iManufacturer           0
  iProduct                2 BT DONGLE10
  iSerial                 0
  bNumConfigurations      1

Also, changed the benign dmesg print that shows up whenever the generic force-suspend fails from bt_dev_err to bt_dev_warn; it's okay and done on a best-effort basis, not a problem if that does not work.

Also, swapped the HCI subver and LMP subver numbers for the Barrot in the comment, which I copied wrong the last time around.

---
 drivers/bluetooth/btusb.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -2045,6 +2045,8 @@ static int btusb_setup_csr(struct hci_de
 		 */
 		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
 		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
+		set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
 
 		/* Clear the reset quirk since this is not an actual
 		 * early Bluetooth 1.1 device from CSR.

@@ -2055,7 +2057,7 @@ static int btusb_setup_csr(struct hci_de
 		/*
 		 * Special workaround for these BT 4.0 chip clones, and potentially more:
 		 *
-		 * - 0x0134: a Barrot 8041a02                 (HCI rev: 0x1012 sub: 0x0810)
+		 * - 0x0134: a Barrot 8041a02                 (HCI rev: 0x0810 sub: 0x1012)
 		 * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709)
 		 *
 		 * These controllers are really messed-up.

@@ -2084,7 +2086,7 @@ static int btusb_setup_csr(struct hci_de
 		if (ret >= 0)
 			msleep(200);
 		else
-			bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround");
+			bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround");
 
 		pm_runtime_forbid(&data->udev->dev);
 

From: Brian Norris <[email protected]>

commit 1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream.

This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.

Users are reporting regressions in regulatory domain detection and channel availability.

The problem this was trying to resolve was fixed in firmware anyway:

    QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
    https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552

---
 drivers/net/wireless/ath/regd.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

@@ -667,14 +667,14 @@ ath_regd_init_wiphy(struct ath_regulator
 
 /*
  * Some users have reported their EEPROM programmed with
- * 0x8000 or 0x0 set, this is not a supported regulatory
- * domain but since we have more than one user with it we
- * need a solution for them. We default to 0x64, which is
- * the default Atheros world regulatory domain.
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
  */
 static void ath_regd_sanitize(struct ath_regulatory *reg)
 {
-	if (reg->current_rd != COUNTRY_ERD_FLAG && reg->current_rd != 0)
+	if (reg->current_rd != COUNTRY_ERD_FLAG)
 		return;
 	printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
 	reg->current_rd = 0x64;

From: Roberto Sassu <[email protected]>

commit 6b79f96f4a23846516e5e6e4dd37fc06f43a60dd upstream.

If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL.

Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

---
 drivers/gpu/drm/virtio/virtgpu_gem.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -248,6 +248,9 @@ void virtio_gpu_array_put_free(struct vi
 {
 	u32 i;
 
+	if (!objs)
+		return;
+
 	for (i = 0; i < objs->nents; i++)
 		drm_gem_object_put(objs->objs[i]);
 	virtio_gpu_array_free(objs);

From: Ritesh Harjani <[email protected]>

commit cc16eecae687912238ee6efbff71ad31e2bc414e upstream.

jbd2_journal_wait_updates() is called with j_state_lock held. But if there is a commit in progress, then this transaction might get committed and freed via jbd2_journal_commit_transaction() -> jbd2_journal_free_transaction(), when we release j_state_lock. So check for journal->j_running_transaction everytime we release and acquire j_state_lock to avoid use-after-free issue.

---
 fs/jbd2/transaction.c |   41 +++++++++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 16 deletions(-)

@@ -842,27 +842,38 @@ EXPORT_SYMBOL(jbd2_journal_restart);
  */
 void jbd2_journal_wait_updates(journal_t *journal)
 {
-	transaction_t *commit_transaction = journal->j_running_transaction;
+	DEFINE_WAIT(wait);
 
-	if (!commit_transaction)
-		return;
+	while (1) {
+		/*
+		 * Note that the running transaction can get freed under us if
+		 * this transaction is getting committed in
+		 * jbd2_journal_commit_transaction() ->
+		 * jbd2_journal_free_transaction(). This can only happen when we
+		 * release j_state_lock -> schedule() -> acquire j_state_lock.
+		 * Hence we should everytime retrieve new j_running_transaction
+		 * value (after j_state_lock release acquire cycle), else it may
+		 * lead to use-after-free of old freed transaction.
+		 */
+		transaction_t *transaction = journal->j_running_transaction;
 
-	spin_lock(&commit_transaction->t_handle_lock);
-	while (atomic_read(&commit_transaction->t_updates)) {
-		DEFINE_WAIT(wait);
+		if (!transaction)
+			break;
 
+		spin_lock(&transaction->t_handle_lock);
 		prepare_to_wait(&journal->j_wait_updates, &wait,
-					TASK_UNINTERRUPTIBLE);
-		if (atomic_read(&commit_transaction->t_updates)) {
-			spin_unlock(&commit_transaction->t_handle_lock);
-			write_unlock(&journal->j_state_lock);
-			schedule();
-			write_lock(&journal->j_state_lock);
-			spin_lock(&commit_transaction->t_handle_lock);
+				TASK_UNINTERRUPTIBLE);
+		if (!atomic_read(&transaction->t_updates)) {
+			spin_unlock(&transaction->t_handle_lock);
+			finish_wait(&journal->j_wait_updates, &wait);
+			break;
 		}
+		spin_unlock(&transaction->t_handle_lock);
+		write_unlock(&journal->j_state_lock);
+		schedule();
 		finish_wait(&journal->j_wait_updates, &wait);
+		write_lock(&journal->j_state_lock);
 	}
-	spin_unlock(&commit_transaction->t_handle_lock);
 }
 
 /**

@@ -877,8 +888,6 @@ void jbd2_journal_wait_updates(journal_t
  */
 void jbd2_journal_lock_updates(journal_t *journal)
 {
-	DEFINE_WAIT(wait);
-
 	jbd2_might_wait_for_commit(journal);
 
 	write_lock(&journal->j_state_lock);

From: Paul E. McKenney <[email protected]>

commit 10c535787436d62ea28156a4b91365fd89b5a432 upstream.

Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx before reporting the expedited quiescent state. Under heavy real-time load, this can result in this function being preempted before the quiescent state is reported, which can in turn prevent the expedited grace period from completing. Tim Murray reports that the resulting expedited grace periods can take hundreds of milliseconds and even more than one second, when they should normally complete in less than a millisecond.

This was fine given that there were no particular response-time constraints for synchronize_rcu_expedited(), as it was designed for throughput rather than latency. However, some users now need sub-100-millisecond response-time constratints.

This patch therefore follows Neeraj's suggestion (seconded by Tim and by Uladzislau Rezki) of simply reversing the two operations.

---
 kernel/rcu/tree_plugin.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -556,16 +556,16 @@ rcu_preempt_deferred_qs_irqrestore(struc
 			raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 		}
 
-		/* Unboost if we were boosted. */
-		if (IS_ENABLED(CONFIG_RCU_BOOST) && drop_boost_mutex)
-			rt_mutex_futex_unlock(&rnp->boost_mtx.rtmutex);
-
 		/*
 		 * If this was the last task on the expedited lists,
 		 * then we need to report up the rcu_node hierarchy.
 		 */
 		if (!empty_exp && empty_exp_now)
 			rcu_report_exp_rnp(rnp, true);
+
+		/* Unboost if we were boosted. */
+		if (IS_ENABLED(CONFIG_RCU_BOOST) && drop_boost_mutex)
+			rt_mutex_futex_unlock(&rnp->boost_mtx.rtmutex);
 	} else {
 		local_irq_restore(flags);
 	}

From: Arnd Bergmann <[email protected]>

commit 222ca305c9fd39e5ed8104da25c09b2b79a516a8 upstream.

Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not.

Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison.

---
 arch/csky/include/asm/uaccess.h       |    7 +++----
 arch/hexagon/include/asm/uaccess.h    |   18 +++++++++---------
 arch/microblaze/include/asm/uaccess.h |   19 ++++---------------
 3 files changed, 16 insertions(+), 28 deletions(-)

@@ -3,14 +3,13 @@
 #ifndef __ASM_CSKY_UACCESS_H
 #define __ASM_CSKY_UACCESS_H
 
-#define user_addr_max() \
-	(uaccess_kernel() ? KERNEL_DS.seg : get_fs().seg)
+#define user_addr_max() (current_thread_info()->addr_limit.seg)
 
 static inline int __access_ok(unsigned long addr, unsigned long size)
 {
-	unsigned long limit = current_thread_info()->addr_limit.seg;
+	unsigned long limit = user_addr_max();
 
-	return ((addr < limit) && ((addr + size) < limit));
+	return (size <= limit) && (addr <= (limit - size));
 }
 #define __access_ok __access_ok
 

@@ -25,17 +25,17 @@
  * Returns true (nonzero) if the memory block *may* be valid, false (zero)
  * if it is definitely invalid.
  *
- * User address space in Hexagon, like x86, goes to 0xbfffffff, so the
- * simple MSB-based tests used by MIPS won't work.  Some further
- * optimization is probably possible here, but for now, keep it
- * reasonably simple and not *too* slow.  After all, we've got the
- * MMU for backup.
  */
+#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
+#define user_addr_max() (uaccess_kernel() ? ~0UL : TASK_SIZE)
 
-#define __access_ok(addr, size) \
-	((get_fs().seg == KERNEL_DS.seg) || \
-	(((unsigned long)addr < get_fs().seg) && \
-	  (unsigned long)size < (get_fs().seg - (unsigned long)addr)))
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	unsigned long limit = TASK_SIZE;
+
+	return (size <= limit) && (addr <= (limit - size));
+}
+#define __access_ok __access_ok
 
 /*
  * When a kernel-mode page fault is taken, the faulting instruction

@@ -39,24 +39,13 @@
 
 # define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
 
-static inline int access_ok(const void __user *addr, unsigned long size)
+static inline int __access_ok(unsigned long addr, unsigned long size)
 {
-	if (!size)
-		goto ok;
+	unsigned long limit = user_addr_max();
 
-	if ((get_fs().seg < ((unsigned long)addr)) ||
-			(get_fs().seg < ((unsigned long)addr + size - 1))) {
-		pr_devel("ACCESS fail at 0x%08x (size 0x%x), seg 0x%08x\n",
-			(__force u32)addr, (u32)size,
-			(u32)get_fs().seg);
-		return 0;
-	}
-ok:
-	pr_devel("ACCESS OK at 0x%08x (size 0x%x), seg 0x%08x\n",
-			(__force u32)addr, (u32)size,
-			(u32)get_fs().seg);
-	return 1;
+	return (size <= limit) && (addr <= (limit - size));
 }
+#define access_ok(addr, size) __access_ok((unsigned long)addr, size)
 
 # define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
 # define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"

From: Linus Lüssing <[email protected]>

commit 4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 upstream.

While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh:

  ieee80211_leave_mesh()
  -> kfree(sdata->u.mesh.ie);
  ...
  ieee80211_join_mesh()
  -> copy_mesh_setup()
     -> old_ie = ifmsh->ie;
     -> kfree(old_ie);

This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling:

  $ iw dev mesh0 mesh leave
  $ iw dev mesh0 mesh join my-mesh

Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too.

The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211.

Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE.

---
 net/mac80211/cfg.c |    3 ---
 1 file changed, 3 deletions(-)

@@ -2148,14 +2148,12 @@ static int copy_mesh_setup(struct ieee80
 		const struct mesh_setup *setup)
 {
 	u8 *new_ie;
-	const u8 *old_ie;
 	struct ieee80211_sub_if_data *sdata = container_of(ifmsh,
 					struct ieee80211_sub_if_data, u.mesh);
 	int i;
 
 	/* allocate information elements */
 	new_ie = NULL;
-	old_ie = ifmsh->ie;
 
 	if (setup->ie_len) {
 		new_ie = kmemdup(setup->ie, setup->ie_len,

@@ -2165,7 +2163,6 @@ static int copy_mesh_setup(struct ieee80
 	}
 	ifmsh->ie_len = setup->ie_len;
 	ifmsh->ie = new_ie;
-	kfree(old_ie);
 
 	/* now copy the rest of the setup parameters */
 	ifmsh->mesh_id_len = setup->mesh_id_len;

From: Lino Sanfilippo <[email protected]>

commit 7e0438f83dc769465ee663bb5dcf8cc154940712 upstream.

The following sequence of operations results in a refcount warning:

1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.

------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac

sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4 brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]

CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0:                   00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---

The reason for this warning is the attempt to get the chip->dev reference in tpm_common_write() although the reference counter is already zero.

Since commit 8979b02aaf1d ("tpm: Fix reference count to main device") the extra reference used to prevent a premature zero counter is never taken, because the required TPM_CHIP_FLAG_TPM2 flag is never set.

Fix this by moving the TPM 2 character device handling from tpm_chip_alloc() to tpm_add_char_device() which is called at a later point in time when the flag has been set in case of TPM2.

Commit fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>") already introduced function tpm_devs_release() to release the extra reference but did not implement the required put on chip->devs that results in the call of this function.

Fix this by putting chip->devs in tpm_chip_unregister().

Finally move the new implementation for the TPM 2 handling into a new function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the good case and error cases.

---
 drivers/char/tpm/tpm-chip.c   |   46 +++++------------------------
 drivers/char/tpm/tpm.h        |    2 +
 drivers/char/tpm/tpm2-space.c |   65 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+), 38 deletions(-)

@@ -274,14 +274,6 @@ static void tpm_dev_release(struct devic
 	kfree(chip);
 }
 
-static void tpm_devs_release(struct device *dev)
-{
-	struct tpm_chip *chip = container_of(dev, struct tpm_chip, devs);
-
-	/* release the master device reference */
-	put_device(&chip->dev);
-}
-
 /**
  * tpm_class_shutdown() - prepare the TPM device for loss of power.
  * @dev: device to which the chip is associated.

@@ -344,7 +336,6 @@ struct tpm_chip *tpm_chip_alloc(struct d
 	chip->dev_num = rc;
 
 	device_initialize(&chip->dev);
-	device_initialize(&chip->devs);
 
 	chip->dev.class = tpm_class;
 	chip->dev.class->shutdown_pre = tpm_class_shutdown;

@@ -352,39 +343,20 @@ struct tpm_chip *tpm_chip_alloc(struct d
 	chip->dev.parent = pdev;
 	chip->dev.groups = chip->groups;
 
-	chip->devs.parent = pdev;
-	chip->devs.class = tpmrm_class;
-	chip->devs.release = tpm_devs_release;
-	/* get extra reference on main device to hold on
-	 * behalf of devs.  This holds the chip structure
-	 * while cdevs is in use.  The corresponding put
-	 * is in the tpm_devs_release (TPM2 only)
-	 */
-	if (chip->flags & TPM_CHIP_FLAG_TPM2)
-		get_device(&chip->dev);
-
 	if (chip->dev_num == 0)
 		chip->dev.devt = MKDEV(MISC_MAJOR, TPM_MINOR);
 	else
 		chip->dev.devt = MKDEV(MAJOR(tpm_devt), chip->dev_num);
 
-	chip->devs.devt =
-		MKDEV(MAJOR(tpm_devt), chip->dev_num + TPM_NUM_DEVICES);
-
 	rc = dev_set_name(&chip->dev, "tpm%d", chip->dev_num);
 	if (rc)
 		goto out;
-	rc = dev_set_name(&chip->devs, "tpmrm%d", chip->dev_num);
-	if (rc)
-		goto out;
 
 	if (!pdev)
 		chip->flags |= TPM_CHIP_FLAG_VIRTUAL;
 
 	cdev_init(&chip->cdev, &tpm_fops);
-	cdev_init(&chip->cdevs, &tpmrm_fops);
 	chip->cdev.owner = THIS_MODULE;
-	chip->cdevs.owner = THIS_MODULE;
 
 	rc = tpm2_init_space(&chip->work_space, TPM2_SPACE_BUFFER_SIZE);
 	if (rc) {

@@ -396,7 +368,6 @@ struct tpm_chip *tpm_chip_alloc(struct d
 	return chip;
 
 out:
-	put_device(&chip->devs);
 	put_device(&chip->dev);
 	return ERR_PTR(rc);
 }

@@ -445,14 +416,9 @@ static int tpm_add_char_device(struct tp
 	}
 
 	if (chip->flags & TPM_CHIP_FLAG_TPM2 && !tpm_is_firmware_upgrade(chip)) {
-		rc = cdev_device_add(&chip->cdevs, &chip->devs);
-		if (rc) {
-			dev_err(&chip->devs,
-				"unable to cdev_device_add() %s, major %d, minor %d, err=%d\n",
-				dev_name(&chip->devs), MAJOR(chip->devs.devt),
-				MINOR(chip->devs.devt), rc);
-			return rc;
-		}
+		rc = tpm_devs_add(chip);
+		if (rc)
+			goto err_del_cdev;
 	}
 
 	/* Make the chip available. */

@@ -460,6 +426,10 @@ static int tpm_add_char_device(struct tp
 	idr_replace(&dev_nums_idr, chip, chip->dev_num);
 	mutex_unlock(&idr_lock);
 
+	return 0;
+
+err_del_cdev:
+	cdev_device_del(&chip->cdev, &chip->dev);
 	return rc;
 }
 

@@ -654,7 +624,7 @@ void tpm_chip_unregister(struct tpm_chip
 		hwrng_unregister(&chip->hwrng);
 	tpm_bios_log_teardown(chip);
 	if (chip->flags & TPM_CHIP_FLAG_TPM2 && !tpm_is_firmware_upgrade(chip))
-		cdev_device_del(&chip->cdevs, &chip->devs);
+		tpm_devs_remove(chip);
 	tpm_del_char_device(chip);
 }
 EXPORT_SYMBOL_GPL(tpm_chip_unregister);

@@ -234,6 +234,8 @@ int tpm2_prepare_space(struct tpm_chip *
 		       size_t cmdsiz);
 int tpm2_commit_space(struct tpm_chip *chip, struct tpm_space *space, void *buf,
 		      size_t *bufsiz);
+int tpm_devs_add(struct tpm_chip *chip);
+void tpm_devs_remove(struct tpm_chip *chip);
 
 void tpm_bios_log_setup(struct tpm_chip *chip);
 void tpm_bios_log_teardown(struct tpm_chip *chip);

From: James Bottomley <[email protected]>

commit fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream.

As part of the series conversion to remove nested TPM operations:

https://lore.kernel.org/all/[email protected]/

exposure of the chip->tpm_mutex was removed from much of the upper level code. In this conversion, tpm2_del_space() was missed. This didn't matter much because it's usually called closely after a converted operation, so there's only a very tiny race window where the chip can be removed before the space flushing is done which causes a NULL deref on the mutex. However, there are reports of this window being hit in practice, so fix this by converting tpm2_del_space() to use tpm_try_get_ops(), which performs all the teardown checks before acquring the mutex.

---
 drivers/char/tpm/tpm2-space.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -58,12 +58,12 @@ int tpm2_init_space(struct tpm_space *sp
 
 void tpm2_del_space(struct tpm_chip *chip, struct tpm_space *space)
 {
-	mutex_lock(&chip->tpm_mutex);
-	if (!tpm_chip_start(chip)) {
+
+	if (tpm_try_get_ops(chip) == 0) {
 		tpm2_flush_sessions(chip, space);
-		tpm_chip_stop(chip);
+		tpm_put_ops(chip);
 	}
-	mutex_unlock(&chip->tpm_mutex);
+
 	kfree(space->context_buf);
 	kfree(space->session_buf);
 }

From: Bryan O'Donoghue <[email protected]>

commit 98d504a82cc75840bec8e3c6ae0e4f411921962b upstream.

The spread of capability between the three WiFi silicon parts wcn36xx supports is:

wcn3620 - 802.11 a/b/g
wcn3660 - 802.11 a/b/g/n
wcn3680 - 802.11 a/b/g/n/ac

We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels. Fix this regression by ensuring we differentiate between all three parts.

---
 drivers/net/wireless/ath/wcn36xx/main.c    |    3 +++
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |    1 +
 2 files changed, 4 insertions(+)

@@ -1513,6 +1513,9 @@ static int wcn36xx_platform_get_resource
 	if (iris_node) {
 		if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
 			wcn->rf_id = RF_IRIS_WCN3620;
+		if (of_device_is_compatible(iris_node, "qcom,wcn3660") ||
+		    of_device_is_compatible(iris_node, "qcom,wcn3660b"))
+			wcn->rf_id = RF_IRIS_WCN3660;
 		if (of_device_is_compatible(iris_node, "qcom,wcn3680"))
 			wcn->rf_id = RF_IRIS_WCN3680;
 		of_node_put(iris_node);

@@ -97,6 +97,7 @@ enum wcn36xx_ampdu_state {
 
 #define RF_UNKNOWN	0x0000
 #define RF_IRIS_WCN3620	0x3620
+#define RF_IRIS_WCN3660	0x3660
 #define RF_IRIS_WCN3680	0x3680
 
 static inline void buff_to_be(u32 *buf, size_t len)

From: Arnd Bergmann <[email protected]>

commit 26509034bef198525d5936c116cbd0c3fa491c0b upstream.

While most m68k platforms use separate address spaces for user and kernel space, at least coldfire does not, and the other ones have a TASK_SIZE that is less than the entire 4GB address range.

Using the default implementation of __access_ok() stops coldfire user space from trivially accessing kernel memory.

---
 arch/m68k/include/asm/uaccess.h |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

@@ -12,14 +12,17 @@
 #include <asm/extable.h>
 
 /* We let the MMU do all checking */
-static inline int access_ok(const void __user *addr,
+static inline int access_ok(const void __user *ptr,
 			    unsigned long size)
 {
-	/*
-	 * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check
-	 * for TASK_SIZE!
-	 */
-	return 1;
+	unsigned long limit = TASK_SIZE;
+	unsigned long addr = (unsigned long)ptr;
+
+	if (IS_ENABLED(CONFIG_CPU_HAS_ADDRESS_SPACES) ||
+	    !IS_ENABLED(CONFIG_MMU))
+		return 1;
+
+	return (size <= limit) && (addr <= (limit - size));
 }
 
 /*

From: Arnd Bergmann <[email protected]>

commit 8926d88ced46700bf6117ceaf391480b943ea9f4 upstream.

The get_user()/put_user() functions are meant to check for access_ok(), while the __get_user()/__put_user() functions don't.

This broke in 4.19 for nds32, when it gained an extraneous check in __get_user(), but lost the check it needs in __put_user().

---
 arch/nds32/include/asm/uaccess.h |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

@@ -70,9 +70,7 @@ static inline void set_fs(mm_segment_t f
  * versions are void (ie, don't return a value as such).
  */
 
-#define get_user	__get_user					\
-
-#define __get_user(x, ptr)						\
+#define get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
 	__get_user_check((x), (ptr), __gu_err);				\

@@ -85,6 +83,14 @@ static inline void set_fs(mm_segment_t f
 	(void)0;							\
 })
 
+#define __get_user(x, ptr)						\
+({									\
+	long __gu_err = 0;						\
+	const __typeof__(*(ptr)) __user *__p = (ptr);			\
+	__get_user_err((x), __p, (__gu_err));				\
+	__gu_err;							\
+})
+
 #define __get_user_check(x, ptr, err)					\
 ({									\
 	const __typeof__(*(ptr)) __user *__p = (ptr);			\

@@ -165,12 +171,18 @@ do {									\
 		: "r"(addr), "i"(-EFAULT)				\
 		: "cc")
 
-#define put_user	__put_user					\
+#define put_user(x, ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_check((x), (ptr), __pu_err);				\
+	__pu_err;							\
+})
 
 #define __put_user(x, ptr)						\
 ({									\
 	long __pu_err = 0;						\
-	__put_user_err((x), (ptr), __pu_err);				\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
+	__put_user_err((x), __p, __pu_err);				\
 	__pu_err;							\
 })
 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

5.17.1-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)

Hi Greg,

5.17.1-rc1 tested.

Run tested on:
- Allwinner H6 (Tanix TX6)
- Intel Tiger Lake x86_64 (nuc11 i7-1165G7)

In addition - build tested on:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos

--
Rudi

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Florian

arm64 qcom db410c device crashed [1]

[   10.823905] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   10.876029] CPU: 1 PID: 193 Comm: kworker/1:2 Not tainted 5.17.1-rc1 #1
[   10.876047] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[   10.876054] Workqueue: pm pm_runtime_work
[   10.876076] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   10.876087] pc : hrtimer_active+0x14/0x80
[   10.876102] lr : hrtimer_cancel+0x28/0x70

The following patch fixes the problem.

From 05afd57f4d34602a652fdaf58e0a2756b3c20fd4 Mon Sep 17 00:00:00 2001
From: Rob Clark <[email protected]>
Date: Tue, 8 Mar 2022 10:48:44 -0800
Subject: drm/msm/gpu: Fix crash on devices without devfreq support (v2)

Avoid going down devfreq paths on devices where devfreq is not initialized.

v2: Change has_devfreq() logic [Dmitry]

---
 drivers/gpu/drm/msm/msm_gpu_devfreq.c | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

--
Linaro LKFT
https://lkft.linaro.org

[1] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17-40-gfa2df4c49e4d/testrun/8704058/suite/linux-log-parser/test/check-kernel-oops-4788790/log

Now queued up, but note, this problem was already present in 5.17.0, right?

thanks,

greg k-h

Yeah.
This problem was there and then later it got fixed.

- Naresh

Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0) and powerpc (ps3_defconfig, gcc 11.2.0).

An old man doll... just what I always wanted! - Clara

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Guenter

Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le, s390x, x86_64), and boot tested x86_64. No regressions noted.