ASoC: atmel: Fixes for AT91SAM9G20-EK audio driver
Mark Brown
maintainercover ASoC: atmel: Fixes for AT91SAM9G20-EK audio driver
At some point the machine driver for the audio subsystem on the AT91SAM9G20-EK appears to have bitrotted, no longer probing due to effects of the transition to the common clock framework. The first patch in this series fixes the initial probe problem, with the rest of the series being random other fixes and cleanups I noticed while looking at the driver.
Mark Brown (3):
ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek
ASoC: atmel: Fix error handling in at91samg20ek probe()
ASoC: atmel: Don't squash error codes from atmel_ssc_set_audio()
sound/soc/atmel/sam9g20_wm8731.c | 74 ++++---------------------------- 1 file changed, 8 insertions(+), 66 deletions(-)
base-commit: f590797fa3c1bccdd19e55441592a23b46aef449
Signature · 1 line
2.30.2
Mark Brown
maintainerPATCH 1/3 ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the PCK0 output of the SoC, intended in the reference software to be supplied using PLLB and programmed to 12MHz. As originally written for use with a board file the audio driver was responsible for configuring the entire tree but in the conversion to the common clock framework the registration of the named pck0 and pllb clocks was removed so the driver has failed to instantiate ever since.
Since the WM8731 driver has had support for managing a MCLK provided via the common clock framework for some time we can simply drop all the clock management code from the machine driver other than configuration of the sysclk rate, the CODEC driver still respects that configuration from the machine driver.
--- sound/soc/atmel/sam9g20_wm8731.c | 61 -------------------------------- 1 file changed, 61 deletions(-)
sound/soc/atmel/sam9g20_wm8731.c +0 -61
@@ -46,35 +46,6 @@*/ #undef ENABLE_MIC_INPUT -static struct clk *mclk; - -static int at91sam9g20ek_set_bias_level (struct snd_soc_card *card, -struct snd_soc_dapm_context *dapm, -enum snd_soc_bias_level level) -{ -static int mclk_on; -int ret =0 ; - -switch (level) { -case SND_SOC_BIAS_ON : -case SND_SOC_BIAS_PREPARE : -if (!mclk_on) - ret =clk_enable (mclk); -if (ret ==0 ) - mclk_on =1 ; -break ; - -case SND_SOC_BIAS_OFF : -case SND_SOC_BIAS_STANDBY : -if (mclk_on) -clk_disable (mclk); - mclk_on =0 ; -break ; - } - -return ret; -} -static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {SND_SOC_DAPM_MIC ("Int Mic" ,NULL ),SND_SOC_DAPM_SPK ("Ext Spk" ,NULL ),
@@ -135,7 +106,6 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = { .owner = THIS_MODULE, .dai_link = &at91sam9g20ek_dai, .num_links = 1, - .set_bias_level = at91sam9g20ek_set_bias_level, .dapm_widgets = at91sam9g20ek_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets),
@@ -148,7 +118,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node;struct device_node *codec_np, *cpu_np; -struct clk *pllb;struct snd_soc_card *card = &snd_soc_at91sam9g20ek;int ret;
@@ -162,31 +131,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)return -EINVAL ; } -/* -* Codec MCLK is supplied by PCK0 - set it up. -*/ - mclk =clk_get (NULL ,"pck0" ); -if (IS_ERR (mclk)) { -dev_err (&pdev->dev,"Failed to get MCLK\n" ); - ret =PTR_ERR (mclk); - goto err; - } - - pllb =clk_get (NULL ,"pllb" ); -if (IS_ERR (pllb)) { -dev_err (&pdev->dev,"Failed to get PLLB\n" ); - ret =PTR_ERR (pllb); - goto err_mclk; - } - ret =clk_set_parent (mclk, pllb); -clk_put (pllb); -if (ret !=0 ) { -dev_err (&pdev->dev,"Failed to set MCLK parent\n" ); - goto err_mclk; - } - -clk_set_rate (mclk,MCLK_RATE ); - card->dev = &pdev->dev;/* Parse device node info */
@@ -230,9 +174,6 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)return ret; -err_mclk: -clk_put (mclk); - mclk =NULL ; err:atmel_ssc_put_audio (0 );return ret;
@@ -242,8 +183,6 @@ static int at91sam9g20ek_audio_remove(struct platform_device *pdev) {struct snd_soc_card *card =platform_get_drvdata (pdev); -clk_disable (mclk); - mclk =NULL ;snd_soc_unregister_card (card);atmel_ssc_put_audio (0 );
Signature · 1 line
2.30.2
Re: [PATCH v1 1/3] ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek
Quoted 8 lines · Mark Brown
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the PCK0 output of the SoC, intended in the reference software to be supplied using PLLB and programmed to 12MHz. As originally written for use with a board file the audio driver was responsible for configuring the entire tree but in the conversion to the common clock framework the registration of the named pck0 and pllb clocks was removed so the driver has failed to instantiate ever since.
Quoted 8 lines
Since the WM8731 driver has had support for managing a MCLK provided via the common clock framework for some time we can simply drop all the clock management code from the machine driver other than configuration of the sysclk rate, the CODEC driver still respects that configuration from the machine driver.
Fixes ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")Signed-off-by Mark Brown <[email protected]>
Thank you for addressing this!
Best regards,
Codrin
Mark Brown
maintainerPATCH 2/3 ASoC: atmel: Fix error handling in at91samg20ek probe()
In reply to Mark BrownThe error handling in the AT91SAM9G20-EK machine driver probe did not consistently free the SSC in error paths, sometimes immediately returning an error rather than doing cleanup. Fix this.
--- sound/soc/atmel/sam9g20_wm8731.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
sound/soc/atmel/sam9g20_wm8731.c +6 -3
@@ -148,7 +148,8 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) codec_np =of_parse_phandle (np,"atmel,audio-codec" ,0 );if (!codec_np) {dev_err (&pdev->dev,"codec info missing\n" ); -return -EINVAL ; + ret = -EINVAL ; + goto err; } at91sam9g20ek_dai.codecs->of_node = codec_np;
@@ -159,7 +160,8 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)if (!cpu_np) {dev_err (&pdev->dev,"dai and pcm info missing\n" );of_node_put (codec_np); -return -EINVAL ; + ret = -EINVAL ; + goto err; } at91sam9g20ek_dai.cpus->of_node = cpu_np; at91sam9g20ek_dai.platforms->of_node = cpu_np;
@@ -170,9 +172,10 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) ret =snd_soc_register_card (card);if (ret) {dev_err (&pdev->dev,"snd_soc_register_card() failed\n" ); + goto err; } -return ret; +return 0 ; err:atmel_ssc_put_audio (0 );
Signature · 1 line
2.30.2
Re: [PATCH v1 2/3] ASoC: atmel: Fix error handling in at91samg20ek probe()
Quoted 5 lines · Mark Brown
The error handling in the AT91SAM9G20-EK machine driver probe did not consistently free the SSC in error paths, sometimes immediately returning an error rather than doing cleanup. Fix this.
Signed-off-by Mark Brown <[email protected]>
Should we have a 'Fixes' tag here?
Other than that:
Thanks!
Mark Brown
maintainerRe: [PATCH v1 2/3] ASoC: atmel: Fix error handling in at91samg20ek probe()
Quoted 8 lines · On Mon, Apr 04, 2022 at 12:47:27PM +0000, [email protected] wrote:
Quoted 5 lines · Mark Brown
The error handling in the AT91SAM9G20-EK machine driver probe did not consistently free the SSC in error paths, sometimes immediately returning an error rather than doing cleanup. Fix this.
Signed-off-by Mark Brown <[email protected]>Should we have a 'Fixes' tag here?
I'm not sure those code paths are ever executing, I really don't think it's worth the effort or noise checking.
Mark Brown
maintainerPATCH 3/3 ASoC: atmel: Don't squash error codes from atmel_ssc_set_audio()
In reply to Mark BrownThe AT91SAM9G20-EK audio driver is replacing any error code returned by atmel_ssc_set_audio() with -EINVAL which could be unhelpful for debugging. Pass through the error code, and include it in the log message we print for good measure.
--- sound/soc/atmel/sam9g20_wm8731.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/atmel/sam9g20_wm8731.c +2 -2
@@ -127,8 +127,8 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) ret =atmel_ssc_set_audio (0 );if (ret) { -dev_err (&pdev->dev,"ssc channel is not valid\n" ); -return -EINVAL ; +dev_err (&pdev->dev,"ssc channel is not valid: %d\n" , ret); +return ret; } card->dev = &pdev->dev;
Signature · 1 line
2.30.2
Re: [PATCH v1 3/3] ASoC: atmel: Don't squash error codes from atmel_ssc_set_audio()
Quoted 6 lines · Mark Brown
The AT91SAM9G20-EK audio driver is replacing any error code returned by
atmel_ssc_set_audio()with-EINVALwhich could be unhelpful for debugging. Pass through the error code, and include it in the log message we print for good measure.Signed-off-by Mark Brown <[email protected]>
Thanks!
Mark Brown
maintainerQuoted 8 lines · Mark Brown
At some point the machine driver for the audio subsystem on the AT91SAM9G20-EK appears to have bitrotted, no longer probing due to effects of the transition to the common clock framework. The first patch in this series fixes the initial probe problem, with the rest of the series being random other fixes and cleanups I noticed while looking at the driver.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/3] ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek
commit: c775cbf62ed4911e4f0f23880f01815753123690
[2/3] ASoC: atmel: Fix error handling in at91samg20ek probe()
commit: 28103509248b94392e04a8ffcbc47da5e3e31dfc
[3/3] ASoC: atmel: Don't squash error codes from atmel_ssc_set_audio()
commit: 01251dd004d8e106295c3aa8e3ba890f0dd55e02All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark