ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables
Subsystems (3)
PATCH 1/1 ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables
Decode ECSPI boot device in env_get_location() from i.MX8M ROMAPI tables. This is necessary to correctly identify env is in SPI NOR when the system boots from SPI NOR attached to ECSPI.
--- arch/arm/include/asm/mach-imx/sys_proto.h | 1 + arch/arm/mach-imx/imx8m/soc.c | 4 ++++ 2 files changed, 5 insertions(+)
arch/arm/include/asm/mach-imx/sys_proto.h +1 -0
@@ -159,6 +159,7 @@ enum boot_dev_type_e {BT_DEV_TYPE_MMC =2 ,BT_DEV_TYPE_NAND =3 ,BT_DEV_TYPE_FLEXSPINOR =4 , +BT_DEV_TYPE_SPI_NOR =6 ,BT_DEV_TYPE_USB =0xE , BT_DEV_TYPE_MEM_DEV = 0xF,
arch/arm/mach-imx/imx8m/soc.c +4 -0
@@ -597,6 +597,9 @@ enum boot_device get_boot_device(void)case BT_DEV_TYPE_FLEXSPINOR : boot_dev =QSPI_BOOT ;break ; +case BT_DEV_TYPE_SPI_NOR : + boot_dev =SPI_NOR_BOOT ; +break ;case BT_DEV_TYPE_USB : boot_dev =USB_BOOT ;break ;
@@ -1335,6 +1338,7 @@ enum env_location env_get_location(enum env_operation op, int prio)switch (dev) {case QSPI_BOOT : +case SPI_NOR_BOOT :if (IS_ENABLED (CONFIG_ENV_IS_IN_SPI_FLASH ))return ENVL_SPI_FLASH ;return ENVL_NOWHERE ;
Signature · 1 line
2.35.1
Hi Marek,
Quoted 8 lines · Marek Vasut
Decode ECSPI boot device in
env_get_location()from i.MX8M ROMAPI tables. This is necessary to correctly identify env is in SPI NOR when the system boots from SPI NOR attached to ECSPI.Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Peng Fan <[email protected]>Cc Stefano Babic <[email protected]>
PATCH 1/1 ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables
In reply to Marek VasutQuoted 8 lines
Decode ECSPI boot device in
env_get_location()from i.MX8M ROMAPI tables. This is necessary to correctly identify env is in SPI NOR when the system boots from SPI NOR attached to ECSPI.Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Peng Fan <[email protected]>Cc Stefano Babic <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================