dt-bindings: Fix missing '/schemas' in $ref paths
Subsystems (12)
Rob Herring
maintainerPATCH 1/1 dt-bindings: Fix missing '/schemas' in $ref paths
Absolute paths in $ref should always begin with '/schemas'. The tools mostly work with it omitted, but for correctness the path should be everything except the hostname as that is taken from the schema's $id value. This scheme is defined in the json-schema spec.
--- Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml | 2 +- Documentation/devicetree/bindings/net/dsa/dsa-port.yaml | 2 +- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 2 +- .../devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml | 2 +- Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml | 2 +- Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml | 2 +- Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml | 4 ++-- Documentation/devicetree/bindings/usb/mediatek,musb.yaml | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml +1 -1
@@ -42,7 +42,7 @@ patternProperties: description: The individual power management domains within this controller type: object - $ref: /power/apple,pmgr-pwrstate.yaml# + $ref: /schemas/power/apple,pmgr-pwrstate.yaml# required: - compatible
Documentation/devicetree/bindings/net/dsa/dsa-port.yaml +1 -1
@@ -15,7 +15,7 @@ description: Ethernet switch port Description allOf: - - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#" + - $ref: /schemas/net/ethernet-controller.yaml# properties: reg:
Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +1 -1
@@ -103,7 +103,7 @@ patternProperties: supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - $ref: /spi/spi-controller.yaml# + $ref: /schemas/spi/spi-controller.yaml# properties: compatible:
Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml +1 -1
@@ -18,7 +18,7 @@ description: | capability of this controller. allOf: - - $ref: /spi/spi-controller.yaml# + - $ref: /schemas/spi/spi-controller.yaml# properties: compatible:
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +1 -1
@@ -16,7 +16,7 @@ description: The QSPI controller allows SPI protocol communication in single, as NOR flash. allOf: - - $ref: /spi/spi-controller.yaml# + - $ref: /schemas/spi/spi-controller.yaml# properties: compatible:
Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml +1 -1
@@ -44,7 +44,7 @@ description: | compatibility. allOf: - - $ref: /spi/spi-controller.yaml# + - $ref: /schemas/spi/spi-controller.yaml# properties: compatible:
Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +2 -2
@@ -132,7 +132,7 @@ properties: default: host connector: - $ref: /connector/usb-connector.yaml# + $ref: /schemas/connector/usb-connector.yaml# description: Connector for dual role switch, especially for "gpio-usb-b-connector" type: object
@@ -191,7 +191,7 @@ properties: patternProperties: "^usb@[0-9a-f]+$": type: object - $ref: /usb/mediatek,mtk-xhci.yaml# + $ref: /schemas/usb/mediatek,mtk-xhci.yaml# description: The xhci should be added as subnode to mtu3 as shown in the following example if the host mode is enabled.
Documentation/devicetree/bindings/usb/mediatek,musb.yaml +1 -1
@@ -63,7 +63,7 @@ properties: maxItems: 1 connector: - $ref: /connector/usb-connector.yaml# + $ref: /schemas/connector/usb-connector.yaml# description: Connector for dual role switch type: object
Signature · 1 line
2.32.0
Quoted 4 lines · Rob Herring
Absolute paths in $ref should always begin with '/schemas'. The tools mostly work with it omitted, but for correctness the path should be everything except the hostname as that is taken from the schema's $id value. This scheme is defined in the json-schema spec.
Quoted 5 lines · On Fri, 25 Mar 2022 16:56:52 -0500 Rob Herring wrote:
Absolute paths in $ref should always begin with '/schemas'. The tools mostly work with it omitted, but for correctness the path should be everything except the hostname as that is taken from the schema's $id value. This scheme is defined in the json-schema spec.
Quoted 8 lines
Cc Hector Martin <[email protected]>Cc Sven Peter <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Florian Fainelli <[email protected]>Cc Vladimir Oltean <[email protected]>Cc "David S. Miller" <[email protected]>Cc Jakub Kicinski <[email protected]>
Quoted 4 lines · Rob Herring
Absolute paths in $ref should always begin with '/schemas'. The tools mostly work with it omitted, but for correctness the path should be everything except the hostname as that is taken from the schema's $id value. This scheme is defined in the json-schema spec.
Signature · 2 lines
Hector Martin ([email protected]) Public Key: https://mrcn.st/pub