Add ethernet0 alias in Nanopi NEO's device tree
Subsystems (2)
PATCH v2 1/1 Add ethernet0 alias in Nanopi NEO's device tree
This is required to enable automatic MAC address generation.
--- arch/arm/dts/sun8i-h3-nanopi-neo.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/dts/sun8i-h3-nanopi-neo.dts +4 -0
@@ -45,6 +45,10 @@ / { model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; }; &ehci0 {
Signature · 1 line
2.35.1
On Sat, 26 Mar 2022 13:09:10 +0100 Baltazár Radics <[email protected]> wrote:
Hi Baltazár,
Quoted 1 line
This is required to enable automatic MAC address generation.
For the records, this should rather be marked as a sync from the Linux tree, where this was conveniently merged just recently.
In the long run we should see if we can avoid those ethernet aliases, since their only purpose seems to be to trigger U-Boot's MAC generation, and I wonder if there is a simpler way. Using U-Boot's DM interface to enumerate Ethernet devices comes to mind, for instance. This would avoid the churn of funnelling those trivial DT changes through Linux first.
I will apply this and push it for the merge window, after adding the Linux tag.
Thanks!
Andre
Quoted 20 lines
Signed-off-by Baltazár Radics <[email protected]>--- arch/arm/dts/sun8i-h3-nanopi-neo.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/dts/sun8i-h3-nanopi-neo.dts +4
-0@@ -45,6 +45,10 @@ / { model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; }; &ehci0 {