net/i40e: backport i40e fixes and share code to 19.11.11
RFC 1/1 net/i40e: backport i40e fixes and share code to 19.11.11
Backport all the i40e share code to 19.11.11 based on cid-i40e.2022.03.08.
Backport all DPDK bug fixes of i40e & i40evf to 19.11.11 from 22.03.
--- drivers/net/i40e/base/README | 2 +- drivers/net/i40e/base/i40e_adminq.c | 217 ++++-- drivers/net/i40e/base/i40e_adminq_cmd.h | 165 ++++- drivers/net/i40e/base/i40e_common.c | 903 ++++++++++++++++++------ drivers/net/i40e/base/i40e_dcb.c | 95 ++- drivers/net/i40e/base/i40e_dcb.h | 18 +- drivers/net/i40e/base/i40e_devids.h | 10 +- drivers/net/i40e/base/i40e_nvm.c | 112 ++- drivers/net/i40e/base/i40e_osdep.h | 2 +- drivers/net/i40e/base/i40e_prototype.h | 100 ++- drivers/net/i40e/base/i40e_register.h | 154 +++- drivers/net/i40e/base/i40e_status.h | 2 +- drivers/net/i40e/base/i40e_type.h | 65 +- drivers/net/i40e/base/virtchnl.h | 28 +- drivers/net/i40e/i40e_ethdev.c | 113 +-- drivers/net/i40e/i40e_ethdev_vf.c | 68 +- drivers/net/i40e/i40e_regs.h | 11 +- drivers/net/i40e/rte_pmd_i40e.c | 4 +- 18 files changed, 1594 insertions(+), 475 deletions(-)
drivers/net/i40e/base/README +1 -1
@@ -6,7 +6,7 @@ Intel® I40E driver ================== This directory contains source code of FreeBSD i40e driver of version -cid-i40e.2018.09.13.tar.gz released by the team which develops +cid-i40e.2022.03.08.tar.gz released by the team which develops basic drivers for any i40e NIC. The directory of base/ contains the original source package. This driver is valid for the product(s) listed below
drivers/net/i40e/base/i40e_adminq.c +156 -61
330 lines not on this page · raw message
drivers/net/i40e/base/i40e_adminq_cmd.h +136 -29
290 lines not on this page · raw message
drivers/net/i40e/base/i40e_common.c +693 -210
1,247 lines not on this page · raw message
drivers/net/i40e/base/i40e_dcb.c +78 -17
143 lines not on this page · raw message
drivers/net/i40e/base/i40e_dcb.h +16 -2
@@ -39,6 +39,11 @@#define I40E_LLDP_ADMINSTATUS_ENABLED_TX 2#define I40E_LLDP_ADMINSTATUS_ENABLED_RXTX 3 +#define I40E_LLDP_CURRENT_STATUS_XL710_OFFSET 0x2B +#define I40E_LLDP_CURRENT_STATUS_X722_OFFSET 0x31 +#define I40E_LLDP_CURRENT_STATUS_OFFSET 1 +#define I40E_LLDP_CURRENT_STATUS_SIZE 1 +/* Defines for LLDP TLV header */ #define I40E_LLDP_MIB_HLEN 14#define I40E_LLDP_TLV_LEN_SHIFT 0
@@ -178,6 +183,12 @@ struct i40e_dcbx_variables {u32 deftsaassignment; }; + +enum i40e_get_fw_lldp_status_resp { +I40E_GET_FW_LLDP_STATUS_DISABLED =0 , +I40E_GET_FW_LLDP_STATUS_ENABLED =1 +}; +enum i40e_status_code i40e_get_dcbx_status (struct i40e_hw *hw,u16 *status); enum i40e_status_code i40e_lldp_to_dcb_config(u8 *lldpmib,
@@ -186,9 +197,12 @@ enum i40e_status_code i40e_aq_get_dcb_config(struct i40e_hw *hw, u8 mib_type,u8 bridgetype, struct i40e_dcbx_config *dcbcfg);enum i40e_status_code i40e_get_dcb_config (struct i40e_hw *hw); -enum i40e_status_code i40e_init_dcb (struct i40e_hw *hw); +enum i40e_status_code i40e_init_dcb (struct i40e_hw *hw, +bool enable_mib_change); +enum i40e_status_code +i40e_get_fw_lldp_status (struct i40e_hw *hw, +enum i40e_get_fw_lldp_status_resp *lldp_status);enum i40e_status_code i40e_set_dcb_config (struct i40e_hw *hw);enum i40e_status_code i40e_dcb_config_to_lldp (u8 *lldpmib,u16 *miblen,struct i40e_dcbx_config *dcbcfg); -#endif /* _I40E_DCB_H_ */
drivers/net/i40e/base/i40e_devids.h +9 -1
@@ -22,9 +22,11 @@#define I40E_DEV_ID_10G_BASE_T4 0x1589#define I40E_DEV_ID_25G_B 0x158A#define I40E_DEV_ID_25G_SFP28 0x158B -#define I40E_DEV_ID_X710_N3000 0x0CF8 +#define I40E_DEV_ID_X710_N3000 0x0CF8#define I40E_DEV_ID_XXV710_N3000 0x0D58#define I40E_DEV_ID_10G_BASE_T_BC 0x15FF +#define I40E_DEV_ID_5G_BASE_T_BC 0x101F +#define I40E_DEV_ID_1G_BASE_T_BC 0x0DD2#if defined(INTEGRATED_VF ) || defined(VF_DRIVER ) || defined(I40E_NDIS_SUPPORT )#define I40E_DEV_ID_VF 0x154C#define I40E_DEV_ID_VF_HV 0x1571
@@ -36,12 +38,18 @@#define I40E_DEV_ID_X722_A0_VF 0x374D#endif #endif +#define I40E_DEV_ID_10G_B 0x104F +#define I40E_DEV_ID_10G_SFP 0x104E +#define I40E_IS_X710TL_DEVICE (d) \ + (((d) == I40E_DEV_ID_10G_BASE_T_BC) || \ + ((d) == I40E_DEV_ID_5G_BASE_T_BC))#define I40E_DEV_ID_KX_X722 0x37CE#define I40E_DEV_ID_QSFP_X722 0x37CF#define I40E_DEV_ID_SFP_X722 0x37D0#define I40E_DEV_ID_1G_BASE_T_X722 0x37D1#define I40E_DEV_ID_10G_BASE_T_X722 0x37D2#define I40E_DEV_ID_SFP_I_X722 0x37D3 +#define I40E_DEV_ID_SFP_X722_A 0x0DDA#if defined(INTEGRATED_VF ) || defined(VF_DRIVER ) || defined(I40E_NDIS_SUPPORT )#define I40E_DEV_ID_X722_VF 0x37CD#endif /* VF_DRIVER */
drivers/net/i40e/base/i40e_nvm.c +109 -3
137 lines not on this page · raw message
drivers/net/i40e/base/i40e_osdep.h +1 -1
@@ -160,7 +160,7 @@ static inline uint64_t i40e_read64_addr(volatile void *addr) I40E_PCI_REG_WRITE(I40E_PCI_REG_ADDR((a), (reg)), (value))#define flush (a) i40e_read_addr(I40E_PCI_REG_ADDR((a), (I40E_GLGEN_STAT))) -#define ARRAY_SIZE (arr) (sizeof(arr)/sizeof(arr[0])) +#define ARRAY_SIZE (arr) RTE_DIM(arr)/* memory allocation tracking */ struct i40e_dma_mem {
drivers/net/i40e/base/i40e_prototype.h +74 -26
179 lines not on this page · raw message
drivers/net/i40e/base/i40e_register.h +117 -37
202 lines not on this page · raw message
drivers/net/i40e/base/i40e_status.h +1 -1
@@ -19,7 +19,7 @@ enum i40e_status_code {I40E_ERR_ADAPTER_STOPPED =-9 ,I40E_ERR_INVALID_MAC_ADDR =-10 ,I40E_ERR_DEVICE_NOT_SUPPORTED =-11 , -I40E_ERR_MASTER_REQUESTS_PENDING =-12 , +I40E_ERR_PRIMARY_REQUESTS_PENDING =-12 ,I40E_ERR_INVALID_LINK_SETTINGS =-13 ,I40E_ERR_AUTONEG_NOT_COMPLETE =-14 , I40E_ERR_RESET_FAILED = -15,
drivers/net/i40e/base/i40e_type.h +62 -3
165 lines not on this page · raw message
drivers/net/i40e/base/virtchnl.h +21 -7
@@ -40,13 +40,19 @@/* Error Codes */ enum virtchnl_status_code {VIRTCHNL_STATUS_SUCCESS =0 , -VIRTCHNL_ERR_PARAM =-5 , +VIRTCHNL_STATUS_ERR_PARAM =-5 , +VIRTCHNL_STATUS_ERR_NO_MEMORY =-18 ,VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH =-38 ,VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR =-39 ,VIRTCHNL_STATUS_ERR_INVALID_VF_ID =-40 , -VIRTCHNL_STATUS_NOT_SUPPORTED =-64 , +VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR =-53 , +VIRTCHNL_STATUS_ERR_NOT_SUPPORTED =-64 , }; +/* Backward compatibility */ +#define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM +#define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED +#define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
@@ -127,13 +133,13 @@ enum virtchnl_ops { }; -/* This macro is used to generate a compilation error if a structure +/* These macros are used to generate compilation errors if a structure/union * is not exactly the correct length. It gives a divide by zero error if the * structure is not of the correct size, otherwise it creates an enum that is * never used. */ #define VIRTCHNL_CHECK_STRUCT_LEN (n,X ) enum virtchnl_static_assert_enum_##X \ - {virtchnl_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0)} + { virtchnl_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0) }/* Virtual channel message descriptor. This overlays the admin queue * descriptor. All other data is passed in external buffers.
@@ -226,6 +232,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);#define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040 +#define VIRTCHNL_VF_OFFLOAD_CRC 0x00000080#define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000#define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
@@ -275,7 +282,13 @@ VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);/* VIRTCHNL_OP_CONFIG_RX_QUEUE * VF sends this message to set up parameters for one RX queue. * External data buffer contains one instance of virtchnl_rxq_info. -* PF configures requested queue and returns a status code. +* PF configures requested queue and returns a status code. The +* crc_disable flag disables CRC stripping on the VF. Setting +* the crc_disable flag to 1 will disable CRC stripping for each +* queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC +* offload must have been set prior to sending this info or the PF +* will ignore the request. This flag should be set the same for +* all of the queues for a VF. */ /* Rx queue config info */
@@ -287,7 +300,8 @@ struct virtchnl_rxq_info {u16 splithdr_enabled;/* deprecated with AVF 1.0 */ u32 databuffer_size;u32 max_pkt_size; -u32 pad1; +u8 crc_disable; +u8 pad1[3 ];u64 dma_ring_addr;enum virtchnl_rx_hsplit rx_split_pos;/* deprecated with AVF 1.0 */ u32 pad2;
@@ -777,7 +791,7 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,case VIRTCHNL_OP_EVENT :case VIRTCHNL_OP_UNKNOWN :default : -return VIRTCHNL_ERR_PARAM ; +return VIRTCHNL_STATUS_ERR_PARAM ; }/* few more checks */ if (err_msg_format || valid_len != msglen)
drivers/net/i40e/i40e_ethdev.c +71 -42
142 lines not on this page · raw message
drivers/net/i40e/i40e_ethdev_vf.c +46 -22
68 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.27.0
Part of the diff is not shown here. View the raw message.
RFC v2 1/1 net/i40e: backport i40e fixes and share code to 19.11.11
Backport all the i40e share code to 19.11.11 based on cid-i40e.2022.03.08.
Backport all DPDK bug fixes of i40e & i40evf to 19.11.11 from 22.03.
---
v2: add new device id for i40e
--- drivers/net/i40e/base/README | 2 +- drivers/net/i40e/base/i40e_adminq.c | 217 ++++-- drivers/net/i40e/base/i40e_adminq_cmd.h | 165 ++++- drivers/net/i40e/base/i40e_common.c | 903 ++++++++++++++++++------ drivers/net/i40e/base/i40e_dcb.c | 95 ++- drivers/net/i40e/base/i40e_dcb.h | 18 +- drivers/net/i40e/base/i40e_devids.h | 10 +- drivers/net/i40e/base/i40e_nvm.c | 112 ++- drivers/net/i40e/base/i40e_osdep.h | 2 +- drivers/net/i40e/base/i40e_prototype.h | 100 ++- drivers/net/i40e/base/i40e_register.h | 154 +++- drivers/net/i40e/base/i40e_status.h | 2 +- drivers/net/i40e/base/i40e_type.h | 65 +- drivers/net/i40e/base/virtchnl.h | 28 +- drivers/net/i40e/i40e_ethdev.c | 116 +-- drivers/net/i40e/i40e_ethdev_vf.c | 68 +- drivers/net/i40e/i40e_regs.h | 11 +- drivers/net/i40e/rte_pmd_i40e.c | 4 +- 18 files changed, 1597 insertions(+), 475 deletions(-)
drivers/net/i40e/base/README +1 -1
@@ -6,7 +6,7 @@ Intel® I40E driver ================== This directory contains source code of FreeBSD i40e driver of version -cid-i40e.2018.09.13.tar.gz released by the team which develops +cid-i40e.2022.03.08.tar.gz released by the team which develops basic drivers for any i40e NIC. The directory of base/ contains the original source package. This driver is valid for the product(s) listed below
drivers/net/i40e/base/i40e_adminq.c +156 -61
330 lines not on this page · raw message
drivers/net/i40e/base/i40e_adminq_cmd.h +136 -29
290 lines not on this page · raw message
drivers/net/i40e/base/i40e_common.c +693 -210
1,247 lines not on this page · raw message
drivers/net/i40e/base/i40e_dcb.c +78 -17
143 lines not on this page · raw message
drivers/net/i40e/base/i40e_dcb.h +16 -2
@@ -39,6 +39,11 @@#define I40E_LLDP_ADMINSTATUS_ENABLED_TX 2#define I40E_LLDP_ADMINSTATUS_ENABLED_RXTX 3 +#define I40E_LLDP_CURRENT_STATUS_XL710_OFFSET 0x2B +#define I40E_LLDP_CURRENT_STATUS_X722_OFFSET 0x31 +#define I40E_LLDP_CURRENT_STATUS_OFFSET 1 +#define I40E_LLDP_CURRENT_STATUS_SIZE 1 +/* Defines for LLDP TLV header */ #define I40E_LLDP_MIB_HLEN 14#define I40E_LLDP_TLV_LEN_SHIFT 0
@@ -178,6 +183,12 @@ struct i40e_dcbx_variables {u32 deftsaassignment; }; + +enum i40e_get_fw_lldp_status_resp { +I40E_GET_FW_LLDP_STATUS_DISABLED =0 , +I40E_GET_FW_LLDP_STATUS_ENABLED =1 +}; +enum i40e_status_code i40e_get_dcbx_status (struct i40e_hw *hw,u16 *status); enum i40e_status_code i40e_lldp_to_dcb_config(u8 *lldpmib,
@@ -186,9 +197,12 @@ enum i40e_status_code i40e_aq_get_dcb_config(struct i40e_hw *hw, u8 mib_type,u8 bridgetype, struct i40e_dcbx_config *dcbcfg);enum i40e_status_code i40e_get_dcb_config (struct i40e_hw *hw); -enum i40e_status_code i40e_init_dcb (struct i40e_hw *hw); +enum i40e_status_code i40e_init_dcb (struct i40e_hw *hw, +bool enable_mib_change); +enum i40e_status_code +i40e_get_fw_lldp_status (struct i40e_hw *hw, +enum i40e_get_fw_lldp_status_resp *lldp_status);enum i40e_status_code i40e_set_dcb_config (struct i40e_hw *hw);enum i40e_status_code i40e_dcb_config_to_lldp (u8 *lldpmib,u16 *miblen,struct i40e_dcbx_config *dcbcfg); -#endif /* _I40E_DCB_H_ */
drivers/net/i40e/base/i40e_devids.h +9 -1
@@ -22,9 +22,11 @@#define I40E_DEV_ID_10G_BASE_T4 0x1589#define I40E_DEV_ID_25G_B 0x158A#define I40E_DEV_ID_25G_SFP28 0x158B -#define I40E_DEV_ID_X710_N3000 0x0CF8 +#define I40E_DEV_ID_X710_N3000 0x0CF8#define I40E_DEV_ID_XXV710_N3000 0x0D58#define I40E_DEV_ID_10G_BASE_T_BC 0x15FF +#define I40E_DEV_ID_5G_BASE_T_BC 0x101F +#define I40E_DEV_ID_1G_BASE_T_BC 0x0DD2#if defined(INTEGRATED_VF ) || defined(VF_DRIVER ) || defined(I40E_NDIS_SUPPORT )#define I40E_DEV_ID_VF 0x154C#define I40E_DEV_ID_VF_HV 0x1571
@@ -36,12 +38,18 @@#define I40E_DEV_ID_X722_A0_VF 0x374D#endif #endif +#define I40E_DEV_ID_10G_B 0x104F +#define I40E_DEV_ID_10G_SFP 0x104E +#define I40E_IS_X710TL_DEVICE (d) \ + (((d) == I40E_DEV_ID_10G_BASE_T_BC) || \ + ((d) == I40E_DEV_ID_5G_BASE_T_BC))#define I40E_DEV_ID_KX_X722 0x37CE#define I40E_DEV_ID_QSFP_X722 0x37CF#define I40E_DEV_ID_SFP_X722 0x37D0#define I40E_DEV_ID_1G_BASE_T_X722 0x37D1#define I40E_DEV_ID_10G_BASE_T_X722 0x37D2#define I40E_DEV_ID_SFP_I_X722 0x37D3 +#define I40E_DEV_ID_SFP_X722_A 0x0DDA#if defined(INTEGRATED_VF ) || defined(VF_DRIVER ) || defined(I40E_NDIS_SUPPORT )#define I40E_DEV_ID_X722_VF 0x37CD#endif /* VF_DRIVER */
drivers/net/i40e/base/i40e_nvm.c +109 -3
137 lines not on this page · raw message
drivers/net/i40e/base/i40e_osdep.h +1 -1
@@ -160,7 +160,7 @@ static inline uint64_t i40e_read64_addr(volatile void *addr) I40E_PCI_REG_WRITE(I40E_PCI_REG_ADDR((a), (reg)), (value))#define flush (a) i40e_read_addr(I40E_PCI_REG_ADDR((a), (I40E_GLGEN_STAT))) -#define ARRAY_SIZE (arr) (sizeof(arr)/sizeof(arr[0])) +#define ARRAY_SIZE (arr) RTE_DIM(arr)/* memory allocation tracking */ struct i40e_dma_mem {
drivers/net/i40e/base/i40e_prototype.h +74 -26
179 lines not on this page · raw message
drivers/net/i40e/base/i40e_register.h +117 -37
202 lines not on this page · raw message
drivers/net/i40e/base/i40e_status.h +1 -1
@@ -19,7 +19,7 @@ enum i40e_status_code {I40E_ERR_ADAPTER_STOPPED =-9 ,I40E_ERR_INVALID_MAC_ADDR =-10 ,I40E_ERR_DEVICE_NOT_SUPPORTED =-11 , -I40E_ERR_MASTER_REQUESTS_PENDING =-12 , +I40E_ERR_PRIMARY_REQUESTS_PENDING =-12 ,I40E_ERR_INVALID_LINK_SETTINGS =-13 ,I40E_ERR_AUTONEG_NOT_COMPLETE =-14 , I40E_ERR_RESET_FAILED = -15,
drivers/net/i40e/base/i40e_type.h +62 -3
165 lines not on this page · raw message
drivers/net/i40e/base/virtchnl.h +21 -7
@@ -40,13 +40,19 @@/* Error Codes */ enum virtchnl_status_code {VIRTCHNL_STATUS_SUCCESS =0 , -VIRTCHNL_ERR_PARAM =-5 , +VIRTCHNL_STATUS_ERR_PARAM =-5 , +VIRTCHNL_STATUS_ERR_NO_MEMORY =-18 ,VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH =-38 ,VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR =-39 ,VIRTCHNL_STATUS_ERR_INVALID_VF_ID =-40 , -VIRTCHNL_STATUS_NOT_SUPPORTED =-64 , +VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR =-53 , +VIRTCHNL_STATUS_ERR_NOT_SUPPORTED =-64 , }; +/* Backward compatibility */ +#define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM +#define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED +#define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
@@ -127,13 +133,13 @@ enum virtchnl_ops { }; -/* This macro is used to generate a compilation error if a structure +/* These macros are used to generate compilation errors if a structure/union * is not exactly the correct length. It gives a divide by zero error if the * structure is not of the correct size, otherwise it creates an enum that is * never used. */ #define VIRTCHNL_CHECK_STRUCT_LEN (n,X ) enum virtchnl_static_assert_enum_##X \ - {virtchnl_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0)} + { virtchnl_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0) }/* Virtual channel message descriptor. This overlays the admin queue * descriptor. All other data is passed in external buffers.
@@ -226,6 +232,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);#define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040 +#define VIRTCHNL_VF_OFFLOAD_CRC 0x00000080#define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000#define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
@@ -275,7 +282,13 @@ VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);/* VIRTCHNL_OP_CONFIG_RX_QUEUE * VF sends this message to set up parameters for one RX queue. * External data buffer contains one instance of virtchnl_rxq_info. -* PF configures requested queue and returns a status code. +* PF configures requested queue and returns a status code. The +* crc_disable flag disables CRC stripping on the VF. Setting +* the crc_disable flag to 1 will disable CRC stripping for each +* queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC +* offload must have been set prior to sending this info or the PF +* will ignore the request. This flag should be set the same for +* all of the queues for a VF. */ /* Rx queue config info */
@@ -287,7 +300,8 @@ struct virtchnl_rxq_info {u16 splithdr_enabled;/* deprecated with AVF 1.0 */ u32 databuffer_size;u32 max_pkt_size; -u32 pad1; +u8 crc_disable; +u8 pad1[3 ];u64 dma_ring_addr;enum virtchnl_rx_hsplit rx_split_pos;/* deprecated with AVF 1.0 */ u32 pad2;
@@ -777,7 +791,7 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,case VIRTCHNL_OP_EVENT :case VIRTCHNL_OP_UNKNOWN :default : -return VIRTCHNL_ERR_PARAM ; +return VIRTCHNL_STATUS_ERR_PARAM ; }/* few more checks */ if (err_msg_format || valid_len != msglen)
drivers/net/i40e/i40e_ethdev.c +74 -42
142 lines not on this page · raw message
drivers/net/i40e/i40e_ethdev_vf.c +46 -22
68 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.27.0
Part of the diff is not shown here. View the raw message.