dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
Subsystems (3)
PATCH v3 1/2 dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
Current dts files with RK3188/RK3066 'cru' nodes are manually verified. In order to automate this process rockchip,rk3188-cru.txt has to be converted to YAML.
Changed:
Add properties to fix notifications by clocks.yaml for example:
clocks
clock-names
---
Changed V3:
add Rockchip maintainer on her request
fix yamllint line too long
Changed V2:
change clocks maxItems
add clock-names
use clock-controller node name
remove assigned-xxx
--- .../bindings/clock/rockchip,rk3188-cru.txt | 61 --------------- .../bindings/clock/rockchip,rk3188-cru.yaml | 78 +++++++++++++++++++ 2 files changed, 78 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt deleted +0 -61
@@ -1,61 +0,0 @@ -* Rockchip RK3188/RK3066 Clock and Reset Unit - -The RK3188/RK3066 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or - "rockchip,rk3066a-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3188-cru.h and -dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. -Similar macros exist for the reset sources in these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "xin27m" - 27mhz crystal input on rk3066 - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_cif0" - external camera clock - optional, - - "ext_rmii" - external RMII clock - optional, - - "ext_jtag" - externalJTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - };
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +78 -0
78 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v3 2/2 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
Add clocks property to rk3066a/rk3188 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
--- arch/arm/boot/dts/rk3066a.dtsi | 3 ++- arch/arm/boot/dts/rk3188.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
arch/arm/boot/dts/rk3066a.dtsi +2 -1
@@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
arch/arm/boot/dts/rk3188.dtsi +2 -1
@@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; };
Signature · 1 line
2.20.1
Re: [PATCH v3 1/2] dt-bindings: clock: convert rockchip, rk3188-cru.txt to YAML
In reply to Johan JonkerQuoted 4 lines · Johan Jonker
Current dts files with RK3188/RK3066 'cru' nodes are manually verified. In order to automate this process rockchip,rk3188-cru.txt has to be converted to YAML.
Quoted 8 lines
Changed:
Add properties to fix notifications byclocks.yamlfor example:
clocks
clock-namesSigned-off-by Johan Jonker <[email protected]>---
It's the second patchset without my review. What's happening here?
Best regards,
Krzysztof
Stephen Boyd
maintainerQuoting Johan Jonker (2022-03-29 04:13:22)
Quoted 27 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +21
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files.
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 10 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +10
-0+ There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optional
I'd expect all these clks here to be inputs to this node.
Quoted 9 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +9
-0+ +properties: + compatible: + enum: + - rockchip,rk3066a-cru + - rockchip,rk3188-cru + - rockchip,rk3188a-cru + + reg:
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 50
Quoted 10 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +10
-0+ maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1
so that maxItems here should be larger and minItems would be 1?
Quoted 17 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +17
-0+ + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" +
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 77
Quoted 10 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +10
-0+additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>;
Where is clocks in the example?
Heiko Stübner
maintainerHi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required
Quoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Or optional clocks may not be available at all.
So for the past years we already relied on the clock-system's self adaptation if a clock becomes available at some point during later boot and hence do not have those in a clocks-property.
Heiko
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Stephen Boyd
maintainerQuoting Heiko Stübner (2022-04-01 00:55:55)
Quoted 50 lines
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Quoted 6 lines
Or optional clocks may not be available at all.
So for the past years we already relied on the clock-system's self adaptation if a clock becomes available at some point during later boot and hence do not have those in a clocks-property.
Are you saying that we can't have these clks in the clocks property because there's a circular driver probe dependency? I don't see how that matters for the dt binding. What is broken if they're put in the binding and specified in the node?
Quoted 44 lines · Heiko Stübner
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
Quoted 5 lines
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Are you sure that xin32k (RTC) clock should be input to the clock controller? I would expect it is the input to the SoC RTC block, so there is no circular dependency.
Best regards,
Krzysztof
Quoted 47 lines · Krzysztof Kozlowski
Quoted 46 lines · Heiko Stübner
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
The optional clocks are all part of a circular dependency.
Quoted 7 lines
Quoted 3 lines
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Are you sure that xin32k (RTC) clock should be input to the clock controller? I would expect it is the input to the SoC RTC block, so there is no circular dependency.
clk-rk3188.c:
PNAME(mux_pll_p) = { "xin24m", "xin32k" };
Quoted 4 lines
Best regards,
Krzysztof
Quoted 54 lines · Johan Jonker
Quoted 51 lines · Krzysztof Kozlowski
Quoted 49 lines · Heiko Stübner
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Quoted 7 lines
Quoted 3 lines
Are you sure that xin32k (RTC) clock should be input to the clock controller? I would expect it is the input to the SoC RTC block, so there is no circular dependency.
clk-rk3188.c:
PNAME(mux_pll_p)= { "xin24m", "xin32k" };
Thanks, but that's not the answer whether it is an input to the clock controller. It's the answer how the driver implements this. :)
Best regards,
Krzysztof
Quoted 59 lines · Krzysztof Kozlowski
Quoted 58 lines · Johan Jonker
Quoted 54 lines · Krzysztof Kozlowski
Quoted 44 lines · Heiko Stübner
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
Quoted 5 lines
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Are you sure that xin32k (RTC) clock should be input to the clock controller? I would expect it is the input to the SoC RTC block, so there is no circular dependency.
Quoted 6 lines
Quoted 3 lines
clk-rk3188.c:
PNAME(mux_pll_p)= { "xin24m", "xin32k" };Thanks, but that's not the answer whether it is an input to the clock controller. It's the answer how the driver implements this. :)
PX2 == rk3066
Rockchip PX2 TRM V1.0.pdf
page 30
Chip Clock Architecture Diagram 1
Quoted 3 lines
Best regards,
Krzysztof
Quoted 69 lines · Johan Jonker
Quoted 59 lines · Krzysztof Kozlowski
Quoted 58 lines · Johan Jonker
Quoted 54 lines · Krzysztof Kozlowski
Quoted 44 lines · Heiko Stübner
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
Quoted 5 lines
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Are you sure that xin32k (RTC) clock should be input to the clock controller? I would expect it is the input to the SoC RTC block, so there is no circular dependency.
Quoted 6 lines
Quoted 3 lines
clk-rk3188.c:
PNAME(mux_pll_p)= { "xin24m", "xin32k" };Thanks, but that's not the answer whether it is an input to the clock controller. It's the answer how the driver implements this. :)
Quoted 7 lines
PX2 == rk3066
Rockchip PX2 TRM V1.0.pdf
page 30
Chip Clock Architecture Diagram 1
I found it, thanks. That's the answer, so indeed this is an input.
Answering partially to Heiko/Stephen, this could be still modeled in DTS as a fixed-frequency clock going as input to the clock-controller. The trouble with that approach is that it would actually duplicate the definition (another one coming from PMIC).
Best regards,
Krzysztof
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Heiko Stuebner
maintainerAm Samstag, 2. April 2022, 18:01:11 CEST schrieb Krzysztof Kozlowski:
Quoted 76 lines · Johan Jonker
Quoted 75 lines · Krzysztof Kozlowski
Quoted 59 lines · Johan Jonker
Quoted 58 lines · Krzysztof Kozlowski
Quoted 54 lines · Heiko Stübner
Quoted 44 lines
Hi Stephen,
Am Freitag, 1. April 2022, 00:51:32 CEST schrieb Stephen Boyd:
Quoted 32 lines
Quoting Johan Jonker (2022-03-29 04:13:22)
Quoted 31 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +25
-0@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <[email protected]> + - Heiko Stuebner <[email protected]> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - requiredQuoted 8 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml line 31
Quoted 6 lines
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +6
-0+ - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optionalI'd expect all these clks here to be inputs to this node.
Quoted 5 lines
The optional clocks are all part of a circular dependency.
So for example xin32k normally is generated by the pmic and fed back into the system, so to get xin32k, we need the pmic to probe, which needs i2c, which in turn already needs the clock controller.
Are you sure that xin32k (RTC) clock should be input to the clock controller? I would expect it is the input to the SoC RTC block, so there is no circular dependency.
Quoted 6 lines
Quoted 3 lines
clk-rk3188.c:
PNAME(mux_pll_p)= { "xin24m", "xin32k" };Thanks, but that's not the answer whether it is an input to the clock controller. It's the answer how the driver implements this. :)
PX2 == rk3066
Rockchip PX2 TRM V1.0.pdf
page 30
Quoted 8 lines
Quoted 1 line
Chip Clock Architecture Diagram 1
I found it, thanks. That's the answer, so indeed this is an input.
Answering partially to Heiko/Stephen, this could be still modeled in DTS as a fixed-frequency clock going as input to the clock-controller. The trouble with that approach is that it would actually duplicate the definition (another one coming from PMIC).
And it has the issue that the pmic doesn't necessarily has the clock enabled at boot. Also this would combat one issue by introducing a different one, as this would be modelling a clock in a way that is not reflected by hardware at all.
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 8 lines · Johan Jonker
Current dts files with RK3188/RK3066 'cru' nodes are manually verified. In order to automate this process rockchip,rk3188-cru.txt has to be converted to YAML.
Changed:
Add properties to fix notifications byclocks.yamlfor example:
clocks
clock-names
Applied, thanks!
[1/2] dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
commit: 43434c6681daa89c4c96b6c5ab82cdf894960ee0
[2/2] ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
commit: 89b6d86ded950b385b4778e061f7fc8311fb007eBest regards,
Signature · 1 line
Heiko Stuebner <[email protected]>