Add basic SoC support for mediatek mt8195
v13 cover Add basic SoC support for mediatek mt8195
This series adds basic SoC support for Mediatek's SoC MT8195.
---
Changes in v13:
- add more description of reg items in mtk-sd.yaml
Changes in v12:
- update mtk-sd.yaml to extend reg property and fix yamllint error
- add xhci nodes and move xhci3 property (usb2-lpm-disable) to evb.dts
Changes in v11:
- rebase on 5.17-rc4
Changes in v10:
- clean CC list
Changes in v9:
- remove duplicated cpus dt-bindings patch in v8
Changes in v8:
- v7 mediatek,spi-mtk-nor.yaml patch is applied in branch for-5.17 at kernel/git/broonie/spi.git
- v7 pinctrl-mt8195.yaml patch is applied in branch for-next at kernel/git/linusw/linux-pinctrl.git
- add cortex-a78 compatible to cpus dt-bindings
- add mediatek,drive-strength-adv property to pinctrl dt-bindings
- fix evb dts
- remove i2c nodes with disabled status from dts
- fix pin properties not match pinctrl dt-bindings
- remove unnecessary u3port*
- fix dtsi
- fix node format
- reorder oscillator* nodes
- fix node name of cpu idle nodes
- remove clock-frequency property in the timer node
- reorder clock and clock names in usb nodes
Changes in v7:
- refine title of spi-nor dt-bindings patch
- refine commit message of pinctrl dt-bindings patch
- update pinctrl-mt8195.yaml
- change property pattern from 'pins' to '^pins'
- update examples with new property in descriptions
- add new example
- drop '_' from node names of pinctrl subnodes in mt8195-evb.dts
Changes in v6:
- rebase on 5.16-rc1
- add new clock name to spi-nor dt-bindings
- add "pins" property in pinctrl dt-bindings
- fix fails of dtbs_checks
- remove "arm,armv8" not matched in yaml from cpu compatile
- fix node name of xhci
- remvoe xhci upstreaming wakeup properties
- remove xhci unused properties address-cells and size-cells
- fix node name of ufs-phy
- fix node name of spi-nor
- fix node name and sub-nodes of pinctrl
- fix mmc compatible
Changes in v5:
- enable basic nodes in mt8195-evb.dts
- remove dedicated clock nodes
- add mmc2 node
- fix interrupt number of pinctrl node
- update clock nodes to apply internal fixes
- add dt-bindings for perficfg node
v4 thread:
https://lore.kernel.org/all/[email protected]/
v3 thread:
https://lore.kernel.org/all/[email protected]/
v2 thread:
https://lore.kernel.org/all/[email protected]/
v1 thread:
https://lore.kernel.org/all/[email protected]/
---
Tinghan Shen (2):
dt-bindings: mmc: mtk-sd: increase reg items
arm64: dts: Add mediatek SoC mt8195 and evaluation board
.../devicetree/bindings/mmc/mtk-sd.yaml | 15 +- arch/arm64/boot/dts/mediatek/Makefile | 1 + arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 173 +++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1045 +++++++++++++++++ 4 files changed, 1233 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
Signature · 1 line
2.18.0
PATCH v13 1/2 dt-bindings: mmc: mtk-sd: increase reg items
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers".
Add host top register in the reg binding description for mt8183 and successors.
--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +14 -1
@@ -40,7 +40,10 @@ properties: - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1 + items: + - description: base register (required). + - description: top base register (required for MT8183). clocks: description:
@@ -168,6 +171,16 @@ required: - vmmc-supply - vqmmc-supply +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc +then: + properties: + reg: + minItems: 2 + unevaluatedProperties: false examples:
Signature · 1 line
2.18.0
Matthias Brugger
maintainerRe: [PATCH v13 1/2] dt-bindings: mmc: mtk-sd: increase reg items
Quoted 18 lines · Tinghan Shen
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers".
Add host top register in the reg binding description for mt8183 and successors.
Signed-off-by Wenbin Mei <[email protected]>Signed-off-by Tinghan Shen <[email protected]>--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)Documentation/devicetree/bindings/mmc/mtk-sd.yaml +0
-0
Documentation/devicetree/bindings/mmc/mtk-sd.yaml properties: · line 43
Quoted 5 lines
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +1
-1@@ -40,7 +40,10 @@ properties: - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1
From my understanding adding minItems is correct, but you need to add also maxItems: 2 as there can't be more then two register entries.
Regards,
Matthias
Quoted 23 lines
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +13
-0+ items: + - description: base register (required). + - description: top base register (required for MT8183). clocks: description:@@ -168,6 +171,16 @@ required: - vmmc-supply - vqmmc-supply +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc +then: + properties: + reg: + minItems: 2 + unevaluatedProperties: false examples:
Re: [PATCH v13 1/2] dt-bindings: mmc: mtk-sd: increase reg items
Hi Matthias,
Quoted 30 lines · Matthias Brugger
Quoted 19 lines · Tinghan Shen
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers".
Add host top register in the reg binding description for mt8183 and successors.
Signed-off-by Wenbin Mei <[email protected]>Signed-off-by Tinghan Shen <[email protected]>--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)Documentation/devicetree/bindings/mmc/mtk-sd.yaml +0
-0Documentation/devicetree/bindings/mmc/mtk-sd.yaml properties: · line 43
Quoted 5 lines
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +1
-1@@ -40,7 +40,10 @@ properties: - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1From my understanding adding minItems is correct, but you need to add also
maxItems: 2 as there can't be more then two register entries.
Quoted 3 lines
Regards,
Matthias
After add "maxItems: 2", I get following message when doing dt_binding_check. from this message, it looks like that maxItems is not necessary.
/proj/mtk15399/2cros/src/third_party/kernel/v5.10/Documentation/devicetree/bindings/mmc/mtk-sd.yaml:
properties:reg: {'minItems': 1, 'maxItems': 2, 'items': [{'description': 'base register (required).'}, {'description': 'top base register (required for MT8183).'}]} should not be valid under {'required': ['maxItems']}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
SCHEMA Documentation/devicetree/bindings/processed-schema.json
Best regards,
Tinghan
Quoted 23 lines
Quoted 23 lines
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +13
-0+ items: + - description: base register (required). + - description: top base register (required for MT8183). clocks: description:@@ -168,6 +171,16 @@ required: - vmmc-supply - vqmmc-supply +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc +then: + properties: + reg: + minItems: 2 + unevaluatedProperties: false examples:
Re: [PATCH v13 1/2] dt-bindings: mmc: mtk-sd: increase reg items
Quoted 33 lines · Tinghan Shen
Hi Matthias,
Quoted 30 lines · Matthias Brugger
Quoted 19 lines · Tinghan Shen
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers".
Add host top register in the reg binding description for mt8183 and successors.
Signed-off-by Wenbin Mei <[email protected]>Signed-off-by Tinghan Shen <[email protected]>--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)Documentation/devicetree/bindings/mmc/mtk-sd.yaml +0
-0Documentation/devicetree/bindings/mmc/mtk-sd.yaml properties: · line 43
Quoted 5 lines
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +1
-1@@ -40,7 +40,10 @@ properties: - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1From my understanding adding minItems is correct, but you need to add also
maxItems: 2 as there can't be more then two register entries.
Quoted 6 lines
Quoted 3 lines
Regards,
MatthiasAfter add "maxItems: 2", I get following message when doing
dt_binding_check. from this message, it looks like that maxItems is not necessary.
That's correct, you don't need them because "items" defines it.
Best regards,
Krzysztof
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Re: [PATCH v13 1/2] dt-bindings: mmc: mtk-sd: increase reg items
In reply to Tinghan ShenQuoted 4 lines · Tinghan Shen
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers".
Quoted 9 lines
Add host top register in the reg binding description for mt8183 and successors.
Signed-off-by Wenbin Mei <[email protected]>Signed-off-by Tinghan Shen <[email protected]>--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Re: [PATCH v13 1/2] dt-bindings: mmc: mtk-sd: increase reg items
In reply to Tinghan ShenQuoted 10 lines · Tinghan Shen
MediaTek has a new version of mmc IP since mt8183. Some IO registers are moved to top to improve hardware design and named as "host top registers".
Add host top register in the reg binding description for mt8183 and successors.
Signed-off-by Wenbin Mei <[email protected]>Signed-off-by Tinghan Shen <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
Quoted 38 lines
--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)Documentation/devicetree/bindings/mmc/mtk-sd.yaml +14
-2@@ -40,7 +40,10 @@ properties: - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1 + items: + - description: base register (required). + - description: top base register (required for MT8183). clocks: description:@@ -168,6 +171,16 @@ required: - vmmc-supply - vqmmc-supply +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc +then: + properties: + reg: + minItems: 2 + unevaluatedProperties: false examples: --
Quoted 2 lines
2.18.0
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
PATCH v13 2/2 arm64: dts: Add mediatek SoC mt8195 and evaluation board
In reply to Tinghan ShenAdd basic chip support for mediatek mt8195.
--- arch/arm64/boot/dts/mediatek/Makefile | 1 + arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 173 +++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1045 +++++++++++++++++++ 3 files changed, 1219 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
arch/arm64/boot/dts/mediatek/Makefile +1 -0
@@ -38,4 +38,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
arch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +173 -0
173 lines not on this page · raw message
arch/arm64/boot/dts/mediatek/mt8195.dtsi new file +1045 -0
1,045 lines not on this page · raw message
Signature · 1 line
2.18.0
Re: [PATCH v13 2/2] arm64: dts: Add mediatek SoC mt8195 and evaluation board
Quoted 171 lines · Tinghan Shen
Add basic chip support for mediatek mt8195.
Signed-off-by Seiya Wang <[email protected]>Signed-off-by Tinghan Shen <[email protected]>Reviewed-by AngeloGioacchino Del Regno <--- arch/arm64/boot/dts/mediatek/Makefile | 1 + arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 173 +++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1045 +++++++++++++++++++ 3 files changed, 1219 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsiarch/arm64/boot/dts/mediatek/Makefile +0
-0@@ -38,4 +38,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtbarch/arm64/boot/dts/mediatek/Makefile +1
-0+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtbarch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +137
-0@@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Seiya Wang <[email protected]> + */ +/dts-v1/; +#include "mt8195.dtsi" + +/ { + model = "MediaTek MT8195 evaluation board"; + compatible = "mediatek,mt8195-evb", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pin>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&pio { + i2c0_pin: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c1_pin: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c4_pin: i2c4-pins { + pins { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c6_pin: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + i2c7_pin: i2c7-pins { + pins { + pinmux = <PINMUX_GPIO27__FUNC_SCL7>, + <PINMUX_GPIO28__FUNC_SDA7>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-pins { + pins0 { + pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, + <PINMUX_GPIO141__FUNC_SPINOR_CK>, + <PINMUX_GPIO143__FUNC_SPINOR_IO1>; + bias-pull-down; + }; + + pins1 { + pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>, + <PINMUX_GPIO130__FUNC_SPINOR_IO2>, + <PINMUX_GPIO131__FUNC_SPINOR_IO3>; + bias-pull-up; + }; + }; + + uart0_pin: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + };
arch/arm64/boot/dts/mediatek/mt8195-evb.dts line 147
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +10
-0+ }; +}; + +&u3phy0 { + status="okay"; +}; + +&u3phy1 { + status="okay"; +};
Seems forget to enable &phy2/3? due to xhci2/3 are enabled below
Quoted 27 lines
arch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +26
-0+ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pin>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; + +&xhci3 { + /* This controller is connected with a BT device. + * Disable usb2 lpm to prevent known issues. + */ + usb2-lpm-disable; + status = "okay"; +};
[skip]
Re: [PATCH v13 2/2] arm64: dts: Add mediatek SoC mt8195 and evaluation board
Quoted 176 lines · Chunfeng Yun
Quoted 175 lines · Tinghan Shen
Add basic chip support for mediatek mt8195.
Signed-off-by Seiya Wang <[email protected]>Signed-off-by Tinghan Shen <[email protected]>Reviewed-by AngeloGioacchino Del Regno <--- arch/arm64/boot/dts/mediatek/Makefile | 1 + arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 173 +++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1045 +++++++++++++++++++ 3 files changed, 1219 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsiarch/arm64/boot/dts/mediatek/Makefile +0
-0@@ -38,4 +38,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtbarch/arm64/boot/dts/mediatek/Makefile +1
-0+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtbarch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +141
-0@@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Seiya Wang <[email protected]> + */ +/dts-v1/; +#include "mt8195.dtsi" + +/ { + model = "MediaTek MT8195 evaluation board"; + compatible = "mediatek,mt8195-evb", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pin>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&pio { + i2c0_pin: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c1_pin: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c4_pin: i2c4-pins { + pins { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c6_pin: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + i2c7_pin: i2c7-pins { + pins { + pinmux = <PINMUX_GPIO27__FUNC_SCL7>, + <PINMUX_GPIO28__FUNC_SDA7>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-pins { + pins0 { + pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, + <PINMUX_GPIO141__FUNC_SPINOR_CK>, + <PINMUX_GPIO143__FUNC_SPINOR_IO1>; + bias-pull-down; + }; + + pins1 { + pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>, + <PINMUX_GPIO130__FUNC_SPINOR_IO2>, + <PINMUX_GPIO131__FUNC_SPINOR_IO3>; + bias-pull-up; + }; + }; + + uart0_pin: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; +}; + +&u3phy0 {
Quoted 8 lines
arch/arm64/boot/dts/mediatek/mt8195-evb.dts line 147
Quoted 6 lines
arch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +6
-0+ status="okay"; +}; + +&u3phy1 { + status="okay"; +};Seems forget to enable &phy2/3? due to xhci2/3 are enabled below
Ok, I'll add them at next version.
Thank you.
Best regards,
Tinghan
Quoted 31 lines
Quoted 28 lines
arch/arm64/boot/dts/mediatek/mt8195-evb.dts new file +26
-0+ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pin>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; + +&xhci3 { + /* This controller is connected with a BT device. + * Disable usb2 lpm to prevent known issues. + */ + usb2-lpm-disable; + status = "okay"; +};[skip]