dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
Subsystems (3)
PATCH 1/3 dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
Convert rockchip,rk3036-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have at least one input clock.
--- .../bindings/clock/rockchip,rk3036-cru.txt | 56 --------------- .../bindings/clock/rockchip,rk3036-cru.yaml | 72 +++++++++++++++++++ 2 files changed, 72 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt deleted +0 -56
@@ -1,56 +0,0 @@ -* Rockchip RK3036 Clock and Reset Unit - -The RK3036 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3036-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "rmii_clkin" - external EMAC clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3036-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@20060000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20060000 0x100>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - };
Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml new file +72 -0
72 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 2/3 ARM: dts: rockchip: add clocks property to cru node rk3036
Add clocks and clock-names to the rk3036 cru node, because the device has to have at least one input clock.
--- arch/arm/boot/dts/rk3036.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/rk3036.dtsi +2 -0
@@ -330,6 +330,8 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3036-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>;
Signature · 1 line
2.20.1
PATCH 3/3 ARM: dts: rockchip: rk3036: use generic node name for dma
In reply to Johan JonkerThe node names should be generic, so fix this for the rk3036 dma node and rename it to "dma-controller".
--- arch/arm/boot/dts/rk3036.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/rk3036.dtsi +1 -1
@@ -558,7 +558,7 @@ status = "disabled"; }; - pdma: pdma@20078000 { + pdma: dma-controller@20078000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x20078000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
Signature · 1 line
2.20.1
Re: [PATCH v1 3/3] ARM: dts: rockchip: rk3036: use generic node name for dma
Quoted 8 lines · Johan Jonker
The node names should be generic, so fix this for the rk3036 dma node and rename it to "dma-controller".
Signed-off-by Johan Jonker <[email protected]>--- arch/arm/boot/dts/rk3036.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Best regards,
Krzysztof
Quoted 6 lines · Johan Jonker
Convert rockchip,rk3036-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have at least one input clock.
Quoted 8 lines
Signed-off-by Johan Jonker <[email protected]>--- .../bindings/clock/rockchip,rk3036-cru.txt | 56 --------------- .../bindings/clock/rockchip,rk3036-cru.yaml | 72 +++++++++++++++++++ 2 files changed, 72 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
Best regards,
Krzysztof
Quoted 5 lines · Johan Jonker
Convert rockchip,rk3036-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have at least one input clock.
Applied, thanks!
[1/3] dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
commit: de55d1639067b9dd4986bb4885c41867d085defa
[2/3] ARM: dts: rockchip: add clocks property to cru node rk3036
commit: b35fd1af63ffbad76292495d0fd0deefba414a85Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>