PCI: qcom: fix probe error paths

This series fixes a few problems in the probe error handling which could cause trouble, for example, on probe deferral.

Johan

Johan Hovold (2):
PCI: qcom: fix runtime PM imbalance on probe errors
PCI: qcom: fix unbalanced phy init on probe errors

 drivers/pci/controller/dwc/pcie-qcom.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

2.35.1

Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral.

---
 drivers/pci/controller/dwc/pcie-qcom.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

index 20a0e6533a1c..0b0bd71f1bd2 100644
@@ -1616,17 +1616,14 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pp->ops = &qcom_pcie_dw_ops;
 
 	ret = phy_init(pcie->phy);
-	if (ret) {
-		pm_runtime_disable(&pdev->dev);
+	if (ret)
 		goto err_pm_runtime_put;
-	}
 
 	platform_set_drvdata(pdev, pcie);
 
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		pm_runtime_disable(&pdev->dev);
 		goto err_pm_runtime_put;
 	}
 

2.35.1

Make sure to undo the PHY initialisation (e.g. balance runtime PM) in case host initialisation fails during probe.

---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 0b0bd71f1bd2..df47986bda29 100644
@@ -1624,11 +1624,13 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		goto err_pm_runtime_put;
+		goto err_phy_exit;
 	}
 
 	return 0;
 
+err_phy_exit:
+	phy_exit(pcie->phy);
 err_pm_runtime_put:
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);

2.35.1

In subject, capitalize "Fix" and "PHY" to match previous commits and your commit log. Same for other patch.