Skip to contentSkip to conversation

patman: test_util: Prettify test report outputs for python tools

PATCH In review Alper Nebi Yasak 2 participants 15 messages Apr 2, 2022 – Jun 28, 2022

lore
Share & tools
lore
#0 lore raw

cover patman: test_util: Prettify test report outputs for python tools

These are a few changes to the test utilities shared by binman, patman, buildman and dtoc to make their printed test results cleaner. Simon has sent a patch making test_fdt use these utils [1], this applies on top of that and affects its output as well.

[1] dtoc: Update fdt tests to use test_util
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/

As a comparison, here's how the report currently looks when I add three bad tests to patman (one failing, one error, one skip). Line wrapped with backslashes at the ends for convenience, most things are otherwise jammed on one line:

Quoted 24 lines

Printing text block to stderr:
**************
* test_error *
**************
Printing text block to stdout:
++++++++++++++++
+ test_failure +
++++++++++++++++
<unittest.result.TestResult run=48 errors=1 failures=1> patman.func_test.TestFunctional.test_error \
testtools.testresult.real._StringException: \
RuntimeError: Uncaught error during test

testtools.testresult.real._StringException: \
AssertionError: False is not true

[(<subunit.RemotedTestCase \
description='patman.func_test.TestFunctional.test_failure'>, \
'testtools.testresult.real._StringException: \
AssertionError: False is not true\n\n')]
1 patman test SKIPPED:
patman.func_test.TestFunctional.test_skipped \
(subunit.RemotedTestCase): Example skip reason

Quoted 1 line

patman tests FAILED

This quickly gets very bad the more test failures there are.

Here's what I get after this series:

Quoted 33 lines

======================== Running patman tests ========================
======================================================================
ERROR: patman.func_test.TestFunctional.test_error (subunit.RemotedTestCase) patman.func_test.TestFunctional.test_error
----------------------------------------------------------------------
testtools.testresult.real._StringException: stderr: {{{ Printing text block to stderr:
**************
* test_error *
**************
}}}

RuntimeError: Uncaught error during test

======================================================================
FAIL: patman.func_test.TestFunctional.test_failure (subunit.RemotedTestCase) patman.func_test.TestFunctional.test_failure
----------------------------------------------------------------------
testtools.testresult.real._StringException: stdout: {{{
Printing text block to stdout:
++++++++++++++++
+ test_failure +
++++++++++++++++
}}}

AssertionError: False is not true

======================================================================
SKIP: patman.func_test.TestFunctional.test_skipped (subunit.RemotedTestCase) patman.func_test.TestFunctional.test_skipped
----------------------------------------------------------------------
Example skip reason

Quoted 4 lines

----------------------------------------------------------------------
Ran 48 tests in 4.469s

FAILED (failures=1, errors=1, skipped=1)

There are some weird parts in this as well, like the stdout/stderr being quoted with braces and test descriptions being the same as test names, but they're quirks of the libraries used for concurrency test flows. The report looks slightly better when tests are run non-concurrently.

Alper Nebi Yasak (5):
patman: test_util: Fix printing results for failed tests
patman: test_util: Handle nonexistent tests while loading tests
patman: test_util: Use unittest text runner to print test results
patman: test_util: Customize unittest test results for more info
patman: test_util: Print test stdout/stderr within test summaries

 tools/binman/main.py                     |   8 +-
 tools/buildman/main.py                   |   8 +-
 tools/concurrencytest/concurrencytest.py |  83 ++++++++++++-
 tools/dtoc/main.py                       |   9 +-
 tools/dtoc/test_fdt.py                   |   8 +-
 tools/patman/main.py                     |   8 +-
 tools/patman/test_util.py                | 150 +++++++++++++++--------
 7 files changed, 197 insertions(+), 77 deletions(-)
Signature · 1 line
2.35.1
#1 lore raw

PATCH 1/5 patman: test_util: Fix printing results for failed tests

When printing a python tool's test results, the entire list of failed tests and their tracebacks are reprinted for every failed test. This makes the test output quite unreadable. Fix the loop to print failures and tracebacks one at a time.

---

 tools/patman/test_util.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/patman/test_util.py +1 -1
index c60eb3628e23..8b2220dbbafc 100644
@@ -127,7 +127,7 @@ def report_result(toolname:str, test_name: str, result: unittest.TestResult):
     for test, err in result.errors:
         print(test.id(), err)
     for test, err in result.failures:
-        print(err, result.failures)
+        print(test.id(), err)
     if result.skipped:
         print('%d %s test%s SKIPPED:' % (len(result.skipped), toolname,
             's' if len(result.skipped) > 1 else ''))
Signature · 1 line
2.35.1
Reviewed-by on v1 1/5
#2 lore raw

Re: [PATCH 1/5] patman: test_util: Fix printing results for failed tests

Quoted 11 lines · Alper Nebi Yasak

When printing a python tool's test results, the entire list of failed tests and their tracebacks are reprinted for every failed test. This makes the test output quite unreadable. Fix the loop to print failures and tracebacks one at a time.

---

 tools/patman/test_util.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by
#3 lore raw

Re: [PATCH 1/5] patman: test_util: Fix printing results for failed tests

Quoted 11 lines · Alper Nebi Yasak

When printing a python tool's test results, the entire list of failed tests and their tracebacks are reprinted for every failed test. This makes the test output quite unreadable. Fix the loop to print failures and tracebacks one at a time.

---

 tools/patman/test_util.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-dm, thanks!

#4 lore raw

PATCH 2/5 patman: test_util: Handle nonexistent tests while loading tests

In reply to Alper Nebi Yasak

It's possible to request a specific test to run when trying to run a python tool's tests. If we request a nonexistent test, the unittest loaders generate a fake test that reports this as an error. However, we get these fake tests even when the test exists, because test_util can load tests from multiple places one by one and the test we want only exists in one.

The test_util helpers currently remove these fake tests when printing test results, but that's more of a workaround than a proper solution. Instead, don't even try to load the missing tests.

---

 tools/patman/test_util.py | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
tools/patman/test_util.py +5 -16
index 8b2220dbbafc..a4c2a2c3c0b2 100644
@@ -110,19 +110,6 @@ def report_result(toolname:str, test_name: str, result: unittest.TestResult):
         test_name: Name of test that was run, or None for all
         result: A unittest.TestResult object containing the results
     """
-    # Remove errors which just indicate a missing test. Since Python v3.5 If an
-    # ImportError or AttributeError occurs while traversing name then a
-    # synthetic test that raises that error when run will be returned. These
-    # errors are included in the errors accumulated by result.errors.
-    if test_name:
-        errors = []
-
-        for test, err in result.errors:
-            if ("has no attribute '%s'" % test_name) not in err:
-                errors.append((test, err))
-            result.testsRun -= 1
-        result.errors = errors
-
     print(result)
     for test, err in result.errors:
         print(test.id(), err)
@@ -184,10 +171,12 @@ def run_test_suites(result, debug, verbosity, test_preserve_dirs, processes,
                 preserve_outdirs=test_preserve_dirs and test_name is not None,
                 toolpath=toolpath, verbosity=verbosity)
         if test_name:
-            try:
+            # Since Python v3.5 If an ImportError or AttributeError occurs
+            # while traversing a name then a synthetic test that raises that
+            # error when run will be returned. Check that the requested test
+            # exists, otherwise these errors are included in the results.
+            if test_name in loader.getTestCaseNames(module):
                 suite.addTests(loader.loadTestsFromName(test_name, module))
-            except AttributeError:
-                continue
         else:
             suite.addTests(loader.loadTestsFromTestCase(module))
     if use_concurrent and processes != 1:
Signature · 1 line
2.35.1
Reviewed-by on v1 2/5
#5 lore raw

Re: [PATCH 2/5] patman: test_util: Handle nonexistent tests while loading tests

Quoted 12 lines · Alper Nebi Yasak

It's possible to request a specific test to run when trying to run a python tool's tests. If we request a nonexistent test, the unittest loaders generate a fake test that reports this as an error. However, we get these fake tests even when the test exists, because test_util can load tests from multiple places one by one and the test we want only exists in one.

The test_util helpers currently remove these fake tests when printing test results, but that's more of a workaround than a proper solution. Instead, don't even try to load the missing tests.

Quoted 5 lines

---

 tools/patman/test_util.py | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
Reviewed-by
#6 lore raw

Re: [PATCH 2/5] patman: test_util: Handle nonexistent tests while loading tests

Quoted 12 lines · Alper Nebi Yasak

It's possible to request a specific test to run when trying to run a python tool's tests. If we request a nonexistent test, the unittest loaders generate a fake test that reports this as an error. However, we get these fake tests even when the test exists, because test_util can load tests from multiple places one by one and the test we want only exists in one.

The test_util helpers currently remove these fake tests when printing test results, but that's more of a workaround than a proper solution. Instead, don't even try to load the missing tests.

Quoted 5 lines

---

 tools/patman/test_util.py | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

Applied to u-boot-dm, thanks!

#7 lore raw

PATCH 3/5 patman: test_util: Use unittest text runner to print test results

In reply to Alper Nebi Yasak

The python tools' test utilities handle printing test results, but the output is quite bare compared to an ordinary unittest run. Delegate printing the results to a unittest text runner, which gives us niceties like clear separation between each test's result and how long it took to run the test suite.

Unfortunately it does not print info for skipped tests by default, but this can be handled later by a custom test result subclass. It also does not print the tool name; manually print a heading that includes the toolname so that the outputs of each tool's tests are distinguishable in the CI output.

---

 tools/binman/main.py      |  8 ++----
 tools/buildman/main.py    |  8 ++----
 tools/dtoc/main.py        |  9 +++---
 tools/dtoc/test_fdt.py    |  8 +++---
 tools/patman/main.py      |  8 ++----
 tools/patman/test_util.py | 58 ++++++++++++++-------------------------
 6 files changed, 38 insertions(+), 61 deletions(-)
tools/binman/main.py +3 -5
index 9392b59adb15..d2eea1c4bb76 100755
@@ -14,7 +14,6 @@
 import site
 import sys
 import traceback
-import unittest
 
 # Get the absolute path to this file at run-time
 our_path = os.path.dirname(os.path.realpath(__file__))
@@ -80,19 +79,18 @@ def RunTests(debug, verbosity, processes, test_preserve_dirs, args, toolpath):
     from binman import image_test
     import doctest
 
-    result = unittest.TestResult()
     test_name = args and args[0] or None
 
     # Run the entry tests first ,since these need to be the first to import the
     # 'entry' module.
-    test_util.run_test_suites(
-        result, debug, verbosity, test_preserve_dirs, processes, test_name,
+    result = test_util.run_test_suites(
+        'binman', debug, verbosity, test_preserve_dirs, processes, test_name,
         toolpath,
         [bintool_test.TestBintool, entry_test.TestEntry, ftest.TestFunctional,
          fdt_test.TestFdt, elf_test.TestElf, image_test.TestImage,
          cbfs_util_test.TestCbfs, fip_util_test.TestFip])
 
-    return test_util.report_result('binman', test_name, result)
+    return (0 if result.wasSuccessful() else 1)
 
 def RunTestCoverage(toolpath):
     """Run the tests and check that we get 100% coverage"""
tools/buildman/main.py +3 -5
index 3b6af240802d..67c560c48d37 100755
@@ -11,7 +11,6 @@
 import os
 import re
 import sys
-import unittest
 
 # Bring in the patman libraries
 our_path = os.path.dirname(os.path.realpath(__file__))
@@ -34,19 +33,18 @@ def RunTests(skip_net_tests, verboose, args):
     from buildman import test
     import doctest
 
-    result = unittest.TestResult()
     test_name = args and args[0] or None
     if skip_net_tests:
         test.use_network = False
 
     # Run the entry tests first ,since these need to be the first to import the
     # 'entry' module.
-    test_util.run_test_suites(
-        result, False, verboose, False, None, test_name, [],
+    result = test_util.run_test_suites(
+        'buildman', False, verboose, False, None, test_name, [],
         [test.TestBuild, func_test.TestFunctional,
          'buildman.toolchain', 'patman.gitutil'])
 
-    return test_util.report_result('buildman', test_name, result)
+    return (0 if result.wasSuccessful() else 1)
 
 options, args = cmdline.ParseArgs()
 
tools/dtoc/main.py +4 -5
index fac9db9c786f..5508759d4d56 100755
@@ -24,7 +24,6 @@
 from argparse import ArgumentParser
 import os
 import sys
-import unittest
 
 # Bring in the patman libraries
 our_path = os.path.dirname(os.path.realpath(__file__))
@@ -49,18 +48,18 @@ def run_tests(processes, args):
     from dtoc import test_src_scan
     from dtoc import test_dtoc
 
-    result = unittest.TestResult()
     sys.argv = [sys.argv[0]]
     test_name = args.files and args.files[0] or None
 
     test_dtoc.setup()
 
-    test_util.run_test_suites(
-        result, debug=True, verbosity=1, test_preserve_dirs=False,
+    result = test_util.run_test_suites(
+        toolname='dtoc', debug=True, verbosity=1, test_preserve_dirs=False,
         processes=processes, test_name=test_name, toolpath=[],
         class_and_module_list=[test_dtoc.TestDtoc,test_src_scan.TestSrcScan])
 
-    return test_util.report_result('binman', test_name, result)
+    return (0 if result.wasSuccessful() else 1)
+
 
 def RunTestCoverage():
     """Run the tests and check that we get 100% coverage"""
tools/dtoc/test_fdt.py +4 -4
index 3859af8d032b..3baf4437cdd3 100755
@@ -784,13 +784,13 @@ def RunTests(args):
     Returns:
         Return code, 0 on success
     """
-    result = unittest.TestResult()
     test_name = args and args[0] or None
-    test_util.run_test_suites(
-        result, False, False, False, None, test_name, None,
+    result = test_util.run_test_suites(
+        'test_fdt', False, False, False, None, test_name, None,
         [TestFdt, TestNode, TestProp, TestFdtUtil])
 
-    return test_util.report_result('fdt', test_name, result)
+    return (0 if result.wasSuccessful() else 1)
+
 
 if __name__ != '__main__':
     sys.exit(1)
tools/patman/main.py +3 -5
index 2a2ac4570931..66d4806c8d8f 100755
@@ -12,7 +12,6 @@
 import shutil
 import sys
 import traceback
-import unittest
 
 if __name__ == "__main__":
     # Allow 'from patman import xxx to work'
@@ -134,13 +133,12 @@
     import doctest
     from patman import func_test
 
-    result = unittest.TestResult()
-    test_util.run_test_suites(
-        result, False, False, False, None, None, None,
+    result = test_util.run_test_suites(
+        'patman', False, False, False, None, None, None,
         [test_checkpatch.TestPatch, func_test.TestFunctional,
          'gitutil', 'settings', 'terminal'])
 
-    sys.exit(test_util.report_result('patman', args.testname, result))
+    sys.exit(0 if result.wasSuccessful() else 1)
 
 # Process commits, produce patches files, check them, email them
 elif args.cmd == 'send':
tools/patman/test_util.py +21 -37

83 lines not on this page · raw message

Signature · 1 line
2.35.1
Reviewed-by on v1 3/5
#8 lore raw

Re: [PATCH 3/5] patman: test_util: Use unittest text runner to print test results

Quoted 16 lines · Alper Nebi Yasak

The python tools' test utilities handle printing test results, but the output is quite bare compared to an ordinary unittest run. Delegate printing the results to a unittest text runner, which gives us niceties like clear separation between each test's result and how long it took to run the test suite.

Unfortunately it does not print info for skipped tests by default, but this can be handled later by a custom test result subclass. It also does not print the tool name; manually print a heading that includes the toolname so that the outputs of each tool's tests are distinguishable in the CI output.

---

Quoted 8 lines
 tools/binman/main.py      |  8 ++----
 tools/buildman/main.py    |  8 ++----
 tools/dtoc/main.py        |  9 +++---
 tools/dtoc/test_fdt.py    |  8 +++---
 tools/patman/main.py      |  8 ++----
 tools/patman/test_util.py | 58 ++++++++++++++-------------------------
 6 files changed, 38 insertions(+), 61 deletions(-)
Reviewed-by
#9 lore raw

Re: [PATCH 3/5] patman: test_util: Use unittest text runner to print test results

Quoted 16 lines · Alper Nebi Yasak

The python tools' test utilities handle printing test results, but the output is quite bare compared to an ordinary unittest run. Delegate printing the results to a unittest text runner, which gives us niceties like clear separation between each test's result and how long it took to run the test suite.

Unfortunately it does not print info for skipped tests by default, but this can be handled later by a custom test result subclass. It also does not print the tool name; manually print a heading that includes the toolname so that the outputs of each tool's tests are distinguishable in the CI output.

---

Quoted 8 lines
 tools/binman/main.py      |  8 ++----
 tools/buildman/main.py    |  8 ++----
 tools/dtoc/main.py        |  9 +++---
 tools/dtoc/test_fdt.py    |  8 +++---
 tools/patman/main.py      |  8 ++----
 tools/patman/test_util.py | 58 ++++++++++++++-------------------------
 6 files changed, 38 insertions(+), 61 deletions(-)

Applied to u-boot-dm, thanks!

#10 lore raw

PATCH 4/5 patman: test_util: Customize unittest test results for more info

In reply to Alper Nebi Yasak

By default, unittest test summaries only print extended info about tests that failed or couldn't run due to an error. Use a custom text result class to print info about more cases: skipped tests, expected failures and unexpected successes.

---
This could be squashed into the previous patch, but makes the diff ugly.

 tools/patman/test_util.py | 46 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
tools/patman/test_util.py +46 -0
index ba8f87f75f03..130d91409140 100644
@@ -102,6 +102,51 @@ def capture_sys_output():
         sys.stdout, sys.stderr = old_out, old_err
 
 
+class FullTextTestResult(unittest.TextTestResult):
+    """A test result class that can print extended text results to a stream
+
+    This is meant to be used by a TestRunner as a result class. Like
+    TextTestResult, this prints out the names of tests as they are run,
+    errors as they occur, and a summary of the results at the end of the
+    test run. Beyond those, this prints information about skipped tests,
+    expected failures and unexpected successes.
+
+    Args:
+        stream: A file-like object to write results to
+        descriptions (bool): True to print descriptions with test names
+        verbosity (int): Detail of printed output per test as they run
+            Test stdout and stderr always get printed when buffering
+            them is disabled by the test runner. In addition to that,
+            0: Print nothing
+            1: Print a dot per test
+            2: Print test names
+    """
+    def __init__(self, stream, descriptions, verbosity):
+        self.verbosity = verbosity
+        super().__init__(stream, descriptions, verbosity)
+
+    def printErrors(self):
+        "Called by TestRunner after test run to summarize the tests"
+        # The parent class doesn't keep unexpected successes in the same
+        # format as the rest. Adapt it to what printErrorList expects.
+        unexpected_successes = [
+            (test, 'Test was expected to fail, but succeeded.\n')
+            for test in self.unexpectedSuccesses
+        ]
+
+        super().printErrors()  # FAIL and ERROR
+        self.printErrorList('SKIP', self.skipped)
+        self.printErrorList('XFAIL', self.expectedFailures)
+        self.printErrorList('XPASS', unexpected_successes)
+
+    def addSkip(self, test, reason):
+        """Called when a test is skipped."""
+        # Add empty line to keep spacing consistent with other results
+        if not reason.endswith('\n'):
+            reason += '\n'
+        super().addSkip(test, reason)
+
+
 def run_test_suites(toolname, debug, verbosity, test_preserve_dirs, processes,
                     test_name, toolpath, class_and_module_list):
     """Run a series of test suites and collect the results
@@ -135,6 +180,7 @@ def run_test_suites(toolname, debug, verbosity, test_preserve_dirs, processes,
     runner = unittest.TextTestRunner(
         stream=sys.stdout,
         verbosity=(1 if verbosity is None else verbosity),
+        resultclass=FullTextTestResult,
     )
 
     if use_concurrent and processes != 1:
Signature · 1 line
2.35.1
#11 lore raw

Re: [PATCH 4/5] patman: test_util: Customize unittest test results for more info

By default, unittest test summaries only print extended info about tests that failed or couldn't run due to an error. Use a custom text result class to print info about more cases: skipped tests, expected failures and unexpected successes.

---
This could be squashed into the previous patch, but makes the diff ugly.

 tools/patman/test_util.py | 46 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

Applied to u-boot-dm, thanks!

#12 lore raw

PATCH 5/5 patman: test_util: Print test stdout/stderr within test summaries

In reply to Alper Nebi Yasak

While running tests for a python tool, the tests' outputs get printed in whatever order they happen to run, without any indication as to which output belongs to which test. Unittest supports capturing these outputs and printing them as part of the test summaries, but when a failure or error occurs it switches back to printing as the tests run. Testtools and subunit tests can do the same as their parts inherit from unittest, but they don't outright expose this functionality.

On the unittest side, enable output buffering for the custom test result class. Try to avoid ugly outputs by not printing stdout/stderr before the test summary for low verbosity levels and for successful tests.

On the subunit side, implement a custom TestProtocolClient that enables the same underlying functionality and injects the captured streams as additional test details. This causes them to be merged into their test's error traceback message, which is later rebuilt into an exception and passed to our unittest report class.

---
The way I had to do this for concurrencytest feels hacky, so I am ambivalent towards this patch. I'm actually fine with re-running a failing binman test alone with --debug -v6 to get better, isolated output from it.

 tools/concurrencytest/concurrencytest.py | 83 +++++++++++++++++++++++-
 tools/patman/test_util.py                | 33 +++++++++-
 2 files changed, 112 insertions(+), 4 deletions(-)
tools/concurrencytest/concurrencytest.py +80 -3
index 5e88b94f4156..1c4f03f37e5b 100644
@@ -31,6 +31,7 @@
 from subunit.test_results import AutoTimingTestResultDecorator
 
 from testtools import ConcurrentTestSuite, iterate_tests
+from testtools.content import TracebackContent, text_content
 
 
 _all__ = [
@@ -43,11 +44,81 @@
 CPU_COUNT = cpu_count()
 
 
-def fork_for_tests(concurrency_num=CPU_COUNT):
+class BufferingTestProtocolClient(TestProtocolClient):
+    """A TestProtocolClient which can buffer the test outputs
+
+    This class captures the stdout and stderr output streams of the
+    tests as it runs them, and includes the output texts in the subunit
+    stream as additional details.
+
+    Args:
+        stream: A file-like object to write a subunit stream to
+        buffer (bool): True to capture test stdout/stderr outputs and
+            include them in the test details
+    """
+    def __init__(self, stream, buffer=True):
+        super().__init__(stream)
+        self.buffer = buffer
+
+    def _addOutcome(self, outcome, test, error=None, details=None,
+            error_permitted=True):
+        """Report a test outcome to the subunit stream
+
+        The parent class uses this function as a common implementation
+        for various methods that report successes, errors, failures, etc.
+
+        This version automatically upgrades the error tracebacks to the
+        new 'details' format by wrapping them in a Content object, so
+        that we can include the captured test output in the test result
+        details.
+
+        Args:
+            outcome: A string describing the outcome - used as the
+                event name in the subunit stream.
+            test: The test case whose outcome is to be reported
+            error: Standard unittest positional argument form - an
+                exc_info tuple.
+            details: New Testing-in-python drafted API; a dict from
+                string to subunit.Content objects.
+            error_permitted: If True then one and only one of error or
+                details must be supplied. If False then error must not
+                be supplied and details is still optional.
+        """
+        if details is None:
+            details = {}
+
+        # Parent will raise an exception if error_permitted is False but
+        # error is not None. We want that exception in that case, so
+        # don't touch error when error_permitted is explicitly False.
+        if error_permitted and error is not None:
+            # Parent class prefers error over details
+            details['traceback'] = TracebackContent(error, test)
+            error_permitted = False
+            error = None
+
+        if self.buffer:
+            stdout = sys.stdout.getvalue()
+            if stdout:
+                details['stdout'] = text_content(stdout)
+
+            stderr = sys.stderr.getvalue()
+            if stderr:
+                details['stderr'] = text_content(stderr)
+
+        return super()._addOutcome(outcome, test, error=error,
+                details=details, error_permitted=error_permitted)
+
+
+def fork_for_tests(concurrency_num=CPU_COUNT, buffer=False):
     """Implementation of `make_tests` used to construct `ConcurrentTestSuite`.
 
     :param concurrency_num: number of processes to use.
     """
+    if buffer:
+        test_protocol_client_class = BufferingTestProtocolClient
+    else:
+        test_protocol_client_class = TestProtocolClient
+
     def do_fork(suite):
         """Take suite and start up multiple runners by forking (Unix only).
 
@@ -76,7 +147,7 @@ def do_fork(suite):
                     # child actually gets keystrokes for pdb etc).
                     sys.stdin.close()
                     subunit_result = AutoTimingTestResultDecorator(
-                        TestProtocolClient(stream)
+                        test_protocol_client_class(stream)
                     )
                     process_suite.run(subunit_result)
                 except:
@@ -93,7 +164,13 @@ def do_fork(suite):
             else:
                 os.close(c2pwrite)
                 stream = os.fdopen(c2pread, 'rb')
-                test = ProtocolTestCase(stream)
+                # If we don't pass the second argument here, it defaults
+                # to sys.stdout.buffer down the line. But if we don't
+                # pass it *now*, it may be resolved after sys.stdout is
+                # replaced with a StringIO (to capture tests' outputs)
+                # which doesn't have a buffer attribute and can end up
+                # occasionally causing a 'broken-runner' error.
+                test = ProtocolTestCase(stream, sys.stdout.buffer)
                 result.append(test)
         return result
     return do_fork
tools/patman/test_util.py +32 -1
index 130d91409140..c27e0b39e5fa 100644
@@ -15,6 +15,7 @@
 
 from io import StringIO
 
+buffer_outputs = True
 use_concurrent = True
 try:
     from concurrencytest.concurrencytest import ConcurrentTestSuite
@@ -120,6 +121,7 @@ class FullTextTestResult(unittest.TextTestResult):
             0: Print nothing
             1: Print a dot per test
             2: Print test names
+            3: Print test names, and buffered outputs for failing tests
     """
     def __init__(self, stream, descriptions, verbosity):
         self.verbosity = verbosity
@@ -139,12 +141,39 @@ def printErrors(self):
         self.printErrorList('XFAIL', self.expectedFailures)
         self.printErrorList('XPASS', unexpected_successes)
 
+    def addError(self, test, err):
+        """Called when an error has occurred."""
+        super().addError(test, err)
+        self._mirrorOutput &= self.verbosity >= 3
+
+    def addFailure(self, test, err):
+        """Called when a test has failed."""
+        super().addFailure(test, err)
+        self._mirrorOutput &= self.verbosity >= 3
+
+    def addSubTest(self, test, subtest, err):
+        """Called at the end of a subtest."""
+        super().addSubTest(test, subtest, err)
+        self._mirrorOutput &= self.verbosity >= 3
+
+    def addSuccess(self, test):
+        """Called when a test has completed successfully"""
+        super().addSuccess(test)
+        # Don't print stdout/stderr for successful tests
+        self._mirrorOutput = False
+
     def addSkip(self, test, reason):
         """Called when a test is skipped."""
         # Add empty line to keep spacing consistent with other results
         if not reason.endswith('\n'):
             reason += '\n'
         super().addSkip(test, reason)
+        self._mirrorOutput &= self.verbosity >= 3
+
+    def addExpectedFailure(self, test, err):
+        """Called when an expected failure/error occurred."""
+        super().addExpectedFailure(test, err)
+        self._mirrorOutput &= self.verbosity >= 3
 
 
 def run_test_suites(toolname, debug, verbosity, test_preserve_dirs, processes,
@@ -180,12 +209,14 @@ def run_test_suites(toolname, debug, verbosity, test_preserve_dirs, processes,
     runner = unittest.TextTestRunner(
         stream=sys.stdout,
         verbosity=(1 if verbosity is None else verbosity),
+        buffer=buffer_outputs,
         resultclass=FullTextTestResult,
     )
 
     if use_concurrent and processes != 1:
         suite = ConcurrentTestSuite(suite,
-                fork_for_tests(processes or multiprocessing.cpu_count()))
+                fork_for_tests(processes or multiprocessing.cpu_count(),
+                               buffer=buffer_outputs))
 
     for module in class_and_module_list:
         if isinstance(module, str) and (not test_name or test_name == module):
Signature · 1 line
2.35.1
Reviewed-by on v1 5/5
#13 lore raw

Re: [PATCH 5/5] patman: test_util: Print test stdout/stderr within test summaries

Quoted 19 lines · Alper Nebi Yasak

While running tests for a python tool, the tests' outputs get printed in whatever order they happen to run, without any indication as to which output belongs to which test. Unittest supports capturing these outputs and printing them as part of the test summaries, but when a failure or error occurs it switches back to printing as the tests run. Testtools and subunit tests can do the same as their parts inherit from unittest, but they don't outright expose this functionality.

On the unittest side, enable output buffering for the custom test result class. Try to avoid ugly outputs by not printing stdout/stderr before the test summary for low verbosity levels and for successful tests.

On the subunit side, implement a custom TestProtocolClient that enables the same underlying functionality and injects the captured streams as additional test details. This causes them to be merged into their test's error traceback message, which is later rebuilt into an exception and passed to our unittest report class.

Quoted 6 lines

---
The way I had to do this for concurrencytest feels hacky, so I am ambivalent towards this patch. I'm actually fine with re-running a failing binman test alone with --debug -v6 to get better, isolated output from it.

Yes that's what I tend to do, but I think we should try this patch. We can always drop it in a future release if it causes problems.

Quoted 4 lines
 tools/concurrencytest/concurrencytest.py | 83 +++++++++++++++++++++++-
 tools/patman/test_util.py                | 33 +++++++++-
 2 files changed, 112 insertions(+), 4 deletions(-)
Reviewed-by
#14 lore raw

Re: [PATCH 5/5] patman: test_util: Print test stdout/stderr within test summaries

Quoted 19 lines · Alper Nebi Yasak

While running tests for a python tool, the tests' outputs get printed in whatever order they happen to run, without any indication as to which output belongs to which test. Unittest supports capturing these outputs and printing them as part of the test summaries, but when a failure or error occurs it switches back to printing as the tests run. Testtools and subunit tests can do the same as their parts inherit from unittest, but they don't outright expose this functionality.

On the unittest side, enable output buffering for the custom test result class. Try to avoid ugly outputs by not printing stdout/stderr before the test summary for low verbosity levels and for successful tests.

On the subunit side, implement a custom TestProtocolClient that enables the same underlying functionality and injects the captured streams as additional test details. This causes them to be merged into their test's error traceback message, which is later rebuilt into an exception and passed to our unittest report class.

Quoted 6 lines

---
The way I had to do this for concurrencytest feels hacky, so I am ambivalent towards this patch. I'm actually fine with re-running a failing binman test alone with --debug -v6 to get better, isolated output from it.

Yes that's what I tend to do, but I think we should try this patch. We can always drop it in a future release if it causes problems.

Quoted 4 lines
 tools/concurrencytest/concurrencytest.py | 83 +++++++++++++++++++++++-
 tools/patman/test_util.py                | 33 +++++++++-
 2 files changed, 112 insertions(+), 4 deletions(-)

Applied to u-boot-dm, thanks!