Skip to contentSkip to conversation

Prepare RK3066 U-boot support

PATCH Superseded Johan Jonker 2 participants 27 messages Apr 3, 2022 – Apr 9, 2022

Subsystems (4)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover Prepare RK3066 U-boot support

This patch serie combines a number of cleanups and fixes that are needed in preparation of Rockchip RK3066 U-boot support.

The common TPL/SPL files contain support for 2 timers that are not used in the early models. Change there call condition. As we are there also increase the build coverage.

The existing timer driver is not prepared for OF_PLATDATA. Code was added to make it work for RK3066.

Early Rockchip SoCs don't have MMC internal dma support. Add code to enable the fifo-mode and OF_PLATDATA support. Fix clock ID's when calling the clock driver.

Rockchip serial driver support is split up between SYS_NS16550 for full U-boot and ROCKCHIP_SERIAL init in TPL/SPL. Make it work for more SoC models and OF_PLATDATA.

Changed V4:
combine series
rebase
style fixes

===

Johan Jonker (12):
rockchip: move ROCKCHIP_STIMER_BASE to Kconfig
rockchip: spl: change call condition rockchip_stimer_init()
rockchip: tpl: change call condition rockchip_stimer_init()
rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call
condition
rockchip: tpl: use IS_ENABLED for timer_init() call condition
rockchip: timer: add OF_PLATDATA support for dw-apb-timer
rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER
structure
rockchip: mmc: rockchip_dw_mmc: fix ciu clock index
rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support
rockchip: serial: restyle the serial_rockchip.c driver
rockchip: serial: move driver alias to serial_rockchip.c
rockchip: serial: Kconfig: add select SYS_NS16550 to config
ROCKCHIP_SERIAL

 arch/arm/mach-rockchip/Kconfig        | 10 ++++++
 arch/arm/mach-rockchip/px30/Kconfig   |  3 ++
 arch/arm/mach-rockchip/rk3036/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk3128/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk322x/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk3288/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk3308/Kconfig | 10 +++---
 arch/arm/mach-rockchip/rk3328/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk3368/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk3399/Kconfig |  3 ++
 arch/arm/mach-rockchip/rk3568/Kconfig |  3 ++
 arch/arm/mach-rockchip/spl.c          | 21 ++++++-----
 arch/arm/mach-rockchip/tpl.c          | 12 +++++--
 configs/rock_defconfig                |  3 +-
 drivers/mmc/rockchip_dw_mmc.c         | 20 ++++++++---
 drivers/serial/Kconfig                |  1 +
 drivers/serial/ns16550.c              |  2 --
 drivers/serial/serial_rockchip.c      | 39 +++++++++-----------
 drivers/timer/dw-apb-timer.c          | 52 +++++++++++++++++++--------
 include/configs/px30_common.h         |  1 -
 include/configs/rk3036_common.h       |  1 -
 include/configs/rk3128_common.h       |  1 -
 include/configs/rk322x_common.h       |  1 -
 include/configs/rk3288_common.h       |  1 -
 include/configs/rk3308_common.h       |  1 -
 include/configs/rk3328_common.h       |  1 -
 include/configs/rk3368_common.h       |  1 -
 include/configs/rk3399_common.h       |  1 -
 include/configs/rk3568_common.h       |  1 -
 29 files changed, 137 insertions(+), 70 deletions(-)
Signature · 1 line
2.20.1
#1 lore raw

PATCH v4 1/12 rockchip: move ROCKCHIP_STIMER_BASE to Kconfig

Move ROCKCHIP_STIMER_BASE to Kconfig.

---

Changed V4:
rebase
remove depends on
rk3188/rk3066 must now disable ROCKCHIP_STIMER in defconfig with defconfig there is more flexibility for other SoC types

Changed V3:
add ROCKCHIP_STIMER

---
 arch/arm/mach-rockchip/Kconfig        | 10 ++++++++++
 arch/arm/mach-rockchip/px30/Kconfig   |  3 +++
 arch/arm/mach-rockchip/rk3036/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk3128/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk322x/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk3288/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk3308/Kconfig | 10 ++++++----
 arch/arm/mach-rockchip/rk3328/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk3368/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk3399/Kconfig |  3 +++
 arch/arm/mach-rockchip/rk3568/Kconfig |  3 +++
 configs/rock_defconfig                |  3 ++-
 include/configs/px30_common.h         |  1 -
 include/configs/rk3036_common.h       |  1 -
 include/configs/rk3128_common.h       |  1 -
 include/configs/rk322x_common.h       |  1 -
 include/configs/rk3288_common.h       |  1 -
 include/configs/rk3308_common.h       |  1 -
 include/configs/rk3328_common.h       |  1 -
 include/configs/rk3368_common.h       |  1 -
 include/configs/rk3399_common.h       |  1 -
 include/configs/rk3568_common.h       |  1 -
 22 files changed, 45 insertions(+), 15 deletions(-)
arch/arm/mach-rockchip/Kconfig +10 -0
index 308dc09b03..811964973a 100644
@@ -339,6 +339,16 @@ config ROCKCHIP_BOOT_MODE_REG
 	  The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
 	  according to the value from this register.
 
+config ROCKCHIP_STIMER
+	bool "Rockchip STIMER support"
+	default y
+	help
+	  Enable Rockchip STIMER support.
+
+config ROCKCHIP_STIMER_BASE
+	hex
+	depends on ROCKCHIP_STIMER
+
 config ROCKCHIP_SPL_RESERVE_IRAM
 	hex "Size of IRAM reserved in SPL"
 	default 0
arch/arm/mach-rockchip/px30/Kconfig +3 -0
index 145bf3591f..4886fe946e 100644
@@ -38,6 +38,9 @@ config TARGET_PX30_CORE
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff010200
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff220020
+
 config SYS_SOC
 	default "px30"
 
arch/arm/mach-rockchip/rk3036/Kconfig +3 -0
index b746795d81..111531be1e 100644
@@ -16,6 +16,9 @@ endchoice
 config ROCKCHIP_BOOT_MODE_REG
 	default 0x200081c8
 
+config ROCKCHIP_STIMER_BASE
+	default 0x200440a0
+
 config SYS_SOC
 	default "rk3036"
 
arch/arm/mach-rockchip/rk3128/Kconfig +3 -0
index b867401c7f..9cc494eb40 100644
@@ -16,6 +16,9 @@ endchoice
 config ROCKCHIP_BOOT_MODE_REG
 	default 0x100a0038
 
+config ROCKCHIP_STIMER_BASE
+	default 0x200440a0
+
 config SYS_SOC
 	default "rk3128"
 
arch/arm/mach-rockchip/rk322x/Kconfig +3 -0
index 6458cd5581..058f848ddc 100644
@@ -8,6 +8,9 @@ config TARGET_EVB_RK3229
 config ROCKCHIP_BOOT_MODE_REG
 	default 0x110005c8
 
+config ROCKCHIP_STIMER_BASE
+	default 0x110d0020
+
 config SYS_SOC
 	default "rk322x"
 
arch/arm/mach-rockchip/rk3288/Kconfig +3 -0
index f37b1bdfd5..dd8c7826fc 100644
@@ -148,6 +148,9 @@ config ROCKCHIP_FAST_SPL
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff730094
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff810020
+
 config SYS_SOC
 	default "rk3288"
 
arch/arm/mach-rockchip/rk3308/Kconfig +6 -4
index 8fa536e15d..194353e4cd 100644
@@ -8,6 +8,12 @@ config TARGET_ROC_RK3308_CC
        bool "Firefly roc-rk3308-cc"
 	select BOARD_LATE_INIT
 
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff000500
+
+config ROCKCHIP_STIMER_BASE
+	default 0xff1b00a0
+
 config SYS_SOC
 	default "rk3308"
 
@@ -17,10 +23,6 @@ config SYS_MALLOC_F_LEN
 config SPL_SERIAL
 	default y
 
-config ROCKCHIP_BOOT_MODE_REG
-	default 0xff000500
-
-
 source "board/rockchip/evb_rk3308/Kconfig"
 source "board/firefly/firefly-rk3308/Kconfig"
 
arch/arm/mach-rockchip/rk3328/Kconfig +3 -0
index d13a169022..f6f1e06a83 100644
@@ -15,6 +15,9 @@ endchoice
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff1005c8
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff1d0020
+
 config SYS_SOC
 	default "rk3328"
 
arch/arm/mach-rockchip/rk3368/Kconfig +3 -0
index 78eb96df3d..104db36737 100644
@@ -45,6 +45,9 @@ endchoice
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff738200
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff830020
+
 config SYS_SOC
 	default "rk3368"
 
arch/arm/mach-rockchip/rk3399/Kconfig +3 -0
index 0833e083d9..c1f251316c 100644
@@ -125,6 +125,9 @@ endchoice
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff320300
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff8680a0
+
 config SYS_SOC
 	default "rk3399"
 
arch/arm/mach-rockchip/rk3568/Kconfig +3 -0
index 201c63c2a9..4e7c02cce0 100644
@@ -9,6 +9,9 @@ config TARGET_EVB_RK3568
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xfdc20200
 
+config ROCKCHIP_STIMER_BASE
+	default 0xfdd1c020
+
 config SYS_SOC
 	default "rk3568"
 
configs/rock_defconfig +2 -1
index 46df66994b..4aa4608f90 100644
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3188-radxarock"
 CONFIG_SPL_TEXT_BASE=0x10080800
 CONFIG_ROCKCHIP_RK3188=y
+# CONFIG_ROCKCHIP_STIMER is not set
 CONFIG_TARGET_ROCK=y
 CONFIG_SPL_STACK_R_ADDR=0x60080000
 CONFIG_DEBUG_UART_BASE=0x20064000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x60800800
+CONFIG_DEBUG_UART=y
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3188-radxarock.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
include/configs/px30_common.h +0 -1
index 0992387157..dc609013f3 100644
@@ -12,7 +12,6 @@
 
 #define CONFIG_SYS_NS16550_MEM32
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff220020
 #define COUNTER_FREQUENCY		24000000
 
 /* FIXME: ff020000 is pmu_mem (10k), while ff0e0000 is regular int_mem */
include/configs/rk3036_common.h +0 -1
index 00c453d739..5905518edf 100644
@@ -10,7 +10,6 @@
 
 #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0x200440a0
 #define COUNTER_FREQUENCY		24000000
 #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk3128_common.h +0 -1
index 97caceacfe..d77a7d7b09 100644
@@ -11,7 +11,6 @@
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0x200440a0
 #define COUNTER_FREQUENCY		24000000
 #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk322x_common.h +0 -1
index ef55ef0a83..3258820fcd 100644
@@ -11,7 +11,6 @@
 #define CONFIG_SYS_CBSIZE		1024
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/*  64M */
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0x110d0020
 #define COUNTER_FREQUENCY		24000000
 #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk3288_common.h +0 -1
index 490da7cb23..e2e0f70a70 100644
@@ -13,7 +13,6 @@
 
 #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff810020
 #define COUNTER_FREQUENCY		24000000
 #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk3308_common.h +0 -1
index 1664707ca6..9cda8d9c48 100644
@@ -15,7 +15,6 @@
 
 #define CONFIG_SYS_NS16550_MEM32
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff1b00a0
 #define CONFIG_IRAM_BASE		0xfff80000
 #define CONFIG_SYS_INIT_SP_ADDR		0x00800000
 #define CONFIG_SPL_STACK		0x00400000
include/configs/rk3328_common.h +0 -1
index c1e26a019b..8a5f0c8999 100644
@@ -10,7 +10,6 @@
 
 #define CONFIG_IRAM_BASE		0xff090000
 
-#define CONFIG_ROCKCHIP_STIMER_BASE    0xff1d0020
 #define COUNTER_FREQUENCY		24000000
 
 #define CONFIG_SYS_CBSIZE		1024
include/configs/rk3368_common.h +0 -1
index 8b239ca07d..239296c1d2 100644
@@ -15,7 +15,6 @@
 #define SDRAM_MAX_SIZE			0xff000000
 #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff830020
 #define COUNTER_FREQUENCY		24000000
 
 #define CONFIG_IRAM_BASE		0xff8c0000
include/configs/rk3399_common.h +0 -1
index ed72c8bb6b..4037dba58c 100644
@@ -11,7 +11,6 @@
 #define CONFIG_SYS_CBSIZE		1024
 
 #define COUNTER_FREQUENCY               24000000
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff8680a0
 
 #define CONFIG_IRAM_BASE		0xff8c0000
 
include/configs/rk3568_common.h +0 -1
index 25d7c5cc8f..5649cd64e0 100644
@@ -11,7 +11,6 @@
 #define CONFIG_SYS_CBSIZE		1024
 
 #define COUNTER_FREQUENCY               24000000
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xfdd1c020
 
 #define CONFIG_IRAM_BASE		0xfdcc0000
 
Signature · 1 line
2.20.1
Reviewed-by on v4 1/12
#2 lore raw

Re: [PATCH v4 01/12] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig

Hi Johan,

Quoted 3 lines · Johan Jonker

Move ROCKCHIP_STIMER_BASE to Kconfig.

Thanks,
- Kever

Quoted 349 lines

---

Changed V4:
rebase
remove depends on
rk3188/rk3066 must now disable ROCKCHIP_STIMER in defconfig with defconfig there is more flexibility for other SoC types

Changed V3:
add ROCKCHIP_STIMER

---
  arch/arm/mach-rockchip/Kconfig        | 10 ++++++++++
  arch/arm/mach-rockchip/px30/Kconfig   |  3 +++
  arch/arm/mach-rockchip/rk3036/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk3128/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk322x/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk3288/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk3308/Kconfig | 10 ++++++----
  arch/arm/mach-rockchip/rk3328/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk3368/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk3399/Kconfig |  3 +++
  arch/arm/mach-rockchip/rk3568/Kconfig |  3 +++
  configs/rock_defconfig                |  3 ++-
  include/configs/px30_common.h         |  1 -
  include/configs/rk3036_common.h       |  1 -
  include/configs/rk3128_common.h       |  1 -
  include/configs/rk322x_common.h       |  1 -
  include/configs/rk3288_common.h       |  1 -
  include/configs/rk3308_common.h       |  1 -
  include/configs/rk3328_common.h       |  1 -
  include/configs/rk3368_common.h       |  1 -
  include/configs/rk3399_common.h       |  1 -
  include/configs/rk3568_common.h       |  1 -
  22 files changed, 45 insertions(+), 15 deletions(-)
arch/arm/mach-rockchip/Kconfig +10 -0
index 308dc09b03..811964973a 100644
@@ -339,6 +339,16 @@ config ROCKCHIP_BOOT_MODE_REG
  	  The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
  	  according to the value from this register.
 
+config ROCKCHIP_STIMER
+	bool "Rockchip STIMER support"
+	default y
+	help
+	  Enable Rockchip STIMER support.
+
+config ROCKCHIP_STIMER_BASE
+	hex
+	depends on ROCKCHIP_STIMER
+
  config ROCKCHIP_SPL_RESERVE_IRAM
  	hex "Size of IRAM reserved in SPL"
  	default 0
arch/arm/mach-rockchip/px30/Kconfig +3 -0
index 145bf3591f..4886fe946e 100644
@@ -38,6 +38,9 @@ config TARGET_PX30_CORE
  config ROCKCHIP_BOOT_MODE_REG
  	default 0xff010200
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff220020
+
  config SYS_SOC
  	default "px30"
 
arch/arm/mach-rockchip/rk3036/Kconfig +3 -0
index b746795d81..111531be1e 100644
@@ -16,6 +16,9 @@ endchoice
  config ROCKCHIP_BOOT_MODE_REG
  	default 0x200081c8
 
+config ROCKCHIP_STIMER_BASE
+	default 0x200440a0
+
  config SYS_SOC
  	default "rk3036"
 
arch/arm/mach-rockchip/rk3128/Kconfig +3 -0
index b867401c7f..9cc494eb40 100644
@@ -16,6 +16,9 @@ endchoice
  config ROCKCHIP_BOOT_MODE_REG
  	default 0x100a0038
 
+config ROCKCHIP_STIMER_BASE
+	default 0x200440a0
+
  config SYS_SOC
  	default "rk3128"
 
arch/arm/mach-rockchip/rk322x/Kconfig +3 -0
index 6458cd5581..058f848ddc 100644
@@ -8,6 +8,9 @@ config TARGET_EVB_RK3229
  config ROCKCHIP_BOOT_MODE_REG
  	default 0x110005c8
 
+config ROCKCHIP_STIMER_BASE
+	default 0x110d0020
+
  config SYS_SOC
  	default "rk322x"
 
arch/arm/mach-rockchip/rk3288/Kconfig +3 -0
index f37b1bdfd5..dd8c7826fc 100644
@@ -148,6 +148,9 @@ config ROCKCHIP_FAST_SPL
  config ROCKCHIP_BOOT_MODE_REG
  	default 0xff730094
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff810020
+
  config SYS_SOC
  	default "rk3288"
 
arch/arm/mach-rockchip/rk3308/Kconfig +6 -4
index 8fa536e15d..194353e4cd 100644
@@ -8,6 +8,12 @@ config TARGET_ROC_RK3308_CC
         bool "Firefly roc-rk3308-cc"
  	select BOARD_LATE_INIT
 
+config ROCKCHIP_BOOT_MODE_REG
+	default 0xff000500
+
+config ROCKCHIP_STIMER_BASE
+	default 0xff1b00a0
+
  config SYS_SOC
  	default "rk3308"
 
@@ -17,10 +23,6 @@ config SYS_MALLOC_F_LEN
  config SPL_SERIAL
  	default y
 
-config ROCKCHIP_BOOT_MODE_REG
-	default 0xff000500
-
-
  source "board/rockchip/evb_rk3308/Kconfig"
  source "board/firefly/firefly-rk3308/Kconfig"
 
arch/arm/mach-rockchip/rk3328/Kconfig +3 -0
index d13a169022..f6f1e06a83 100644
@@ -15,6 +15,9 @@ endchoice
  config ROCKCHIP_BOOT_MODE_REG
  	default 0xff1005c8
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff1d0020
+
  config SYS_SOC
  	default "rk3328"
 
arch/arm/mach-rockchip/rk3368/Kconfig +3 -0
index 78eb96df3d..104db36737 100644
@@ -45,6 +45,9 @@ endchoice
  config ROCKCHIP_BOOT_MODE_REG
  	default 0xff738200
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff830020
+
  config SYS_SOC
  	default "rk3368"
 
arch/arm/mach-rockchip/rk3399/Kconfig +3 -0
index 0833e083d9..c1f251316c 100644
@@ -125,6 +125,9 @@ endchoice
  config ROCKCHIP_BOOT_MODE_REG
  	default 0xff320300
 
+config ROCKCHIP_STIMER_BASE
+	default 0xff8680a0
+
  config SYS_SOC
  	default "rk3399"
 
arch/arm/mach-rockchip/rk3568/Kconfig +3 -0
index 201c63c2a9..4e7c02cce0 100644
@@ -9,6 +9,9 @@ config TARGET_EVB_RK3568
  config ROCKCHIP_BOOT_MODE_REG
  	default 0xfdc20200
 
+config ROCKCHIP_STIMER_BASE
+	default 0xfdd1c020
+
  config SYS_SOC
  	default "rk3568"
 
configs/rock_defconfig +2 -1
index 46df66994b..4aa4608f90 100644
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x3F8000
  CONFIG_DEFAULT_DEVICE_TREE="rk3188-radxarock"
  CONFIG_SPL_TEXT_BASE=0x10080800
  CONFIG_ROCKCHIP_RK3188=y
+# CONFIG_ROCKCHIP_STIMER is not set
  CONFIG_TARGET_ROCK=y
  CONFIG_SPL_STACK_R_ADDR=0x60080000
  CONFIG_DEBUG_UART_BASE=0x20064000
  CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_DEBUG_UART=y
  CONFIG_SYS_LOAD_ADDR=0x60800800
+CONFIG_DEBUG_UART=y
  CONFIG_USE_PREBOOT=y
  CONFIG_DEFAULT_FDT_FILE="rk3188-radxarock.dtb"
  # CONFIG_DISPLAY_CPUINFO is not set
include/configs/px30_common.h +0 -1
index 0992387157..dc609013f3 100644
@@ -12,7 +12,6 @@
 
  #define CONFIG_SYS_NS16550_MEM32
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff220020
  #define COUNTER_FREQUENCY		24000000
 
  /* FIXME: ff020000 is pmu_mem (10k), while ff0e0000 is regular int_mem */
include/configs/rk3036_common.h +0 -1
index 00c453d739..5905518edf 100644
@@ -10,7 +10,6 @@
 
  #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0x200440a0
  #define COUNTER_FREQUENCY		24000000
  #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk3128_common.h +0 -1
index 97caceacfe..d77a7d7b09 100644
@@ -11,7 +11,6 @@
  #define CONFIG_SYS_MAXARGS		16
  #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0x200440a0
  #define COUNTER_FREQUENCY		24000000
  #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk322x_common.h +0 -1
index ef55ef0a83..3258820fcd 100644
@@ -11,7 +11,6 @@
  #define CONFIG_SYS_CBSIZE		1024
  #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/*  64M */
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0x110d0020
  #define COUNTER_FREQUENCY		24000000
  #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk3288_common.h +0 -1
index 490da7cb23..e2e0f70a70 100644
@@ -13,7 +13,6 @@
 
  #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff810020
  #define COUNTER_FREQUENCY		24000000
  #define CONFIG_SYS_HZ_CLOCK		24000000
 
include/configs/rk3308_common.h +0 -1
index 1664707ca6..9cda8d9c48 100644
@@ -15,7 +15,6 @@
 
  #define CONFIG_SYS_NS16550_MEM32
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff1b00a0
  #define CONFIG_IRAM_BASE		0xfff80000
  #define CONFIG_SYS_INIT_SP_ADDR		0x00800000
  #define CONFIG_SPL_STACK		0x00400000
include/configs/rk3328_common.h +0 -1
index c1e26a019b..8a5f0c8999 100644
@@ -10,7 +10,6 @@
 
  #define CONFIG_IRAM_BASE		0xff090000
 
-#define CONFIG_ROCKCHIP_STIMER_BASE    0xff1d0020
  #define COUNTER_FREQUENCY		24000000
 
  #define CONFIG_SYS_CBSIZE		1024
include/configs/rk3368_common.h +0 -1
index 8b239ca07d..239296c1d2 100644
@@ -15,7 +15,6 @@
  #define SDRAM_MAX_SIZE			0xff000000
  #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff830020
  #define COUNTER_FREQUENCY		24000000
 
  #define CONFIG_IRAM_BASE		0xff8c0000
include/configs/rk3399_common.h +0 -1
index ed72c8bb6b..4037dba58c 100644
@@ -11,7 +11,6 @@
  #define CONFIG_SYS_CBSIZE		1024
 
  #define COUNTER_FREQUENCY               24000000
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xff8680a0
 
  #define CONFIG_IRAM_BASE		0xff8c0000
 
include/configs/rk3568_common.h +0 -1
index 25d7c5cc8f..5649cd64e0 100644
@@ -11,7 +11,6 @@
  #define CONFIG_SYS_CBSIZE		1024
 
  #define COUNTER_FREQUENCY               24000000
-#define CONFIG_ROCKCHIP_STIMER_BASE	0xfdd1c020
 
  #define CONFIG_IRAM_BASE		0xfdcc0000
 
#3 lore raw

PATCH v4 2/12 rockchip: spl: change call condition rockchip_stimer_init()

In reply to Johan Jonker

The Rockchip SoCs rk3066/rk3188 have no CONFIG_ROCKCHIP_STIMER_BASE defined. Currently only rk3188 has an exception. Make this more generic and call the function rockchip_stimer_init() only when CONFIG_ROCKCHIP_STIMER_BASE is available.

---

Changed V3:
use CONFIG_ROCKCHIP_STIMER

Changed V2:
use IS_ENABLED
add include kconfig.h
move define location so that rockchip_stimer_init() is always visible to the compiler

---
 arch/arm/mach-rockchip/spl.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
arch/arm/mach-rockchip/spl.c +8 -5
index 7a8db632b8..0017ca71b0 100644
@@ -16,6 +16,7 @@
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include <linux/kconfig.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -71,7 +72,6 @@ u32 spl_mmc_boot_mode(const u32 boot_device)
 	return MMCSD_MODE_RAW;
 }
 
-#if !defined(CONFIG_ROCKCHIP_RK3188)
 #define TIMER_LOAD_COUNT_L	0x00
 #define TIMER_LOAD_COUNT_H	0x04
 #define TIMER_CONTROL_REG	0x10
@@ -81,6 +81,7 @@ u32 spl_mmc_boot_mode(const u32 boot_device)
 
 __weak void rockchip_stimer_init(void)
 {
+#if defined(CONFIG_ROCKCHIP_STIMER_BASE)
 	/* If Timer already enabled, don't re-init it */
 	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
 
@@ -95,8 +96,8 @@ __weak void rockchip_stimer_init(void)
 	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
 	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
 	       TIMER_CONTROL_REG);
-}
 #endif
+}
 
 __weak int board_early_init_f(void)
 {
@@ -133,9 +134,11 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 	arch_cpu_init();
-#if !defined(CONFIG_ROCKCHIP_RK3188)
-	rockchip_stimer_init();
-#endif
+
+	/* Init secure timer */
+	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
+		rockchip_stimer_init();
+
 #ifdef CONFIG_SYS_ARCH_TIMER
 	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
 	timer_init();
Signature · 1 line
2.20.1
#4 lore raw

Re: [PATCH v4 02/12] rockchip: spl: change call condition rockchip_stimer_init()

Hi Johan,

Quoted 61 lines · Johan Jonker

The Rockchip SoCs rk3066/rk3188 have no CONFIG_ROCKCHIP_STIMER_BASE defined. Currently only rk3188 has an exception. Make this more generic and call the function rockchip_stimer_init() only when CONFIG_ROCKCHIP_STIMER_BASE is available.

---

Changed V3:
use CONFIG_ROCKCHIP_STIMER

Changed V2:
use IS_ENABLED
add include kconfig.h
move define location so that rockchip_stimer_init() is always visible to the compiler

---
  arch/arm/mach-rockchip/spl.c | 13 ++++++++-----
  1 file changed, 8 insertions(+), 5 deletions(-)
arch/arm/mach-rockchip/spl.c +3 -2
index 7a8db632b8..0017ca71b0 100644
@@ -16,6 +16,7 @@
  #include <asm/global_data.h>
  #include <asm/io.h>
  #include <linux/bitops.h>
+#include <linux/kconfig.h>
 
  DECLARE_GLOBAL_DATA_PTR;
 
@@ -71,7 +72,6 @@ u32 spl_mmc_boot_mode(const u32 boot_device)
  	return MMCSD_MODE_RAW;
  }
 
-#if !defined(CONFIG_ROCKCHIP_RK3188)
  #define TIMER_LOAD_COUNT_L	0x00
  #define TIMER_LOAD_COUNT_H	0x04
  #define TIMER_CONTROL_REG	0x10
@@ -81,6 +81,7 @@ u32 spl_mmc_boot_mode(const u32 boot_device)
 
  __weak void rockchip_stimer_init(void)
  {
+#if defined(CONFIG_ROCKCHIP_STIMER_BASE)
  	/* If Timer already enabled, don't re-init it */
  	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
 
@@ -95,8 +96,8 @@ __weak void rockchip_stimer_init(void)
  	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
  	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
  	       TIMER_CONTROL_REG);
-}
  #endif
+}
 
  __weak int board_early_init_f(void)
  {
@@ -133,9 +134,11 @@ void board_init_f(ulong dummy)
  		hang();

arch/arm/mach-rockchip/spl.c void board_init_f(ulong dummy) · line 141

Quoted 10 lines
arch/arm/mach-rockchip/spl.c +5 -3
  	}
  	arch_cpu_init();
-#if !defined(CONFIG_ROCKCHIP_RK3188)
-	rockchip_stimer_init();
-#endif
+
+	/* Init secure timer */
+	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
+		rockchip_stimer_init();
+

The CONFIG_ROCKCHIP_STIMER and CONFIG_ROCKCHIP_STIMER_BASE are always show up at the same time,

so we don't need two ifdef with two different MACRO in this file, remove one of it.

I would prefer to just call rockchip_stimer_init() here, and it will be empty function for rk3066/rk3188.

Thanks,

- Kever

Quoted 3 lines
arch/arm/mach-rockchip/spl.c +0 -0
  #ifdef CONFIG_SYS_ARCH_TIMER
  	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
  	timer_init();
#5 lore raw

PATCH v4 3/12 rockchip: tpl: change call condition rockchip_stimer_init()

In reply to Johan Jonker

The Rockchip SoCs rk3066/rk3188 have no CONFIG_ROCKCHIP_STIMER_BASE defined. Currently only rk3188 has an exception. Make this more generic and call the function rockchip_stimer_init() only when CONFIG_ROCKCHIP_STIMER_BASE is available.

---

Changed V3:
use CONFIG_ROCKCHIP_STIMER

Changed V2:
use IS_ENABLED
add include kconfig.h
move define location so that rockchip_stimer_init() is always visible to the compiler

---
 arch/arm/mach-rockchip/tpl.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm/mach-rockchip/tpl.c +6 -1
index 3c007bb450..2b561264a5 100644
@@ -15,6 +15,7 @@
 #include <asm/io.h>
 #include <asm/arch-rockchip/bootrom.h>
 #include <linux/bitops.h>
+#include <linux/kconfig.h>
 
 #if CONFIG_IS_ENABLED(BANNER_PRINT)
 #include <timestamp.h>
@@ -29,6 +30,7 @@
 
 __weak void rockchip_stimer_init(void)
 {
+#if defined(CONFIG_ROCKCHIP_STIMER_BASE)
 	/* If Timer already enabled, don't re-init it */
 	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
 
@@ -45,6 +47,7 @@ __weak void rockchip_stimer_init(void)
 	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
 	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
 	       TIMER_CONTROL_REG);
+#endif
 }
 
 void board_init_f(ulong dummy)
@@ -74,7 +77,9 @@ void board_init_f(ulong dummy)
 	}
 
 	/* Init secure timer */
-	rockchip_stimer_init();
+	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
+		rockchip_stimer_init();
+
 	/* Init ARM arch timer in arch/arm/cpu/ */
 	timer_init();
 
Signature · 1 line
2.20.1
#6 lore raw

Re: [PATCH v4 03/12] rockchip: tpl: change call condition rockchip_stimer_init()

Quoted 50 lines · Johan Jonker

The Rockchip SoCs rk3066/rk3188 have no CONFIG_ROCKCHIP_STIMER_BASE defined. Currently only rk3188 has an exception. Make this more generic and call the function rockchip_stimer_init() only when CONFIG_ROCKCHIP_STIMER_BASE is available.

---

Changed V3:
use CONFIG_ROCKCHIP_STIMER

Changed V2:
use IS_ENABLED
add include kconfig.h
move define location so that rockchip_stimer_init() is always visible to the compiler

---
  arch/arm/mach-rockchip/tpl.c | 7 ++++++-
  1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm/mach-rockchip/tpl.c +3 -0
index 3c007bb450..2b561264a5 100644
@@ -15,6 +15,7 @@
  #include <asm/io.h>
  #include <asm/arch-rockchip/bootrom.h>
  #include <linux/bitops.h>
+#include <linux/kconfig.h>
 
  #if CONFIG_IS_ENABLED(BANNER_PRINT)
  #include <timestamp.h>
@@ -29,6 +30,7 @@
 
  __weak void rockchip_stimer_init(void)
  {
+#if defined(CONFIG_ROCKCHIP_STIMER_BASE)
  	/* If Timer already enabled, don't re-init it */
  	u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
 
@@ -45,6 +47,7 @@ __weak void rockchip_stimer_init(void)
  	writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
  	writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
  	       TIMER_CONTROL_REG);
+#endif
  }
 
  void board_init_f(ulong dummy)

arch/arm/mach-rockchip/tpl.c void board_init_f(ulong dummy) · line 81

Quoted 6 lines
arch/arm/mach-rockchip/tpl.c +2 -1
@@ -74,7 +77,9 @@ void board_init_f(ulong dummy)
  	}
 
  	/* Init secure timer */
-	rockchip_stimer_init();
+	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
+		rockchip_stimer_init();

Same with 2/12 for SPL.

Thanks,

- Kever

Quoted 4 lines
arch/arm/mach-rockchip/tpl.c +1 -0
+
  	/* Init ARM arch timer in arch/arm/cpu/ */
  	timer_init();
 
#7 lore raw

PATCH v4 4/12 rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition

In reply to Johan Jonker

Not all Rockchip SoC models use the ARM arch timer. Call the function timer_init() only when CONFIG_SYS_ARCH_TIMER is available.
Replace the ifdef call condition by IS_ENABLED
to increase build coverage and make the code easier to read.

---
 arch/arm/mach-rockchip/spl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-rockchip/spl.c +4 -4
index 0017ca71b0..9c83b038a6 100644
@@ -139,10 +139,10 @@ void board_init_f(ulong dummy)
 	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
 		rockchip_stimer_init();
 
-#ifdef CONFIG_SYS_ARCH_TIMER
-	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
-	timer_init();
-#endif
+	/* Init ARM arch timer */
+	if (IS_ENABLED(CONFIG_SYS_ARCH_TIMER))
+		timer_init();
+
 #if !defined(CONFIG_TPL) || defined(CONFIG_SPL_RAM)
 	debug("\nspl:init dram\n");
 	ret = dram_init();
Signature · 1 line
2.20.1
#8 lore raw

Re: [PATCH v4 04/12] rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition

Quoted 5 lines · Johan Jonker

Not all Rockchip SoC models use the ARM arch timer. Call the function timer_init() only when CONFIG_SYS_ARCH_TIMER is available.
Replace the ifdef call condition by IS_ENABLED
to increase build coverage and make the code easier to read.

The commit message does not really describe the code change.

Quoted 12 lines
---
  arch/arm/mach-rockchip/spl.c | 8 ++++----
  1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-rockchip/spl.c +0 -0
index 0017ca71b0..9c83b038a6 100644

arch/arm/mach-rockchip/spl.c void board_init_f(ulong dummy) · line 144

Quoted 10 lines
arch/arm/mach-rockchip/spl.c +3 -4
@@ -139,10 +139,10 @@ void board_init_f(ulong dummy)
  	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
  		rockchip_stimer_init();
 
-#ifdef CONFIG_SYS_ARCH_TIMER
-	/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
-	timer_init();
-#endif
+	/* Init ARM arch timer */
+	if (IS_ENABLED(CONFIG_SYS_ARCH_TIMER))
+		timer_init();

These two kind of code end up with the same compile output, isn't it?

This patch is no need for this series.

Thanks,
- Kever

Quoted 4 lines
arch/arm/mach-rockchip/spl.c +1 -0
+
  #if !defined(CONFIG_TPL) || defined(CONFIG_SPL_RAM)
  	debug("\nspl:init dram\n");
  	ret = dram_init();
#9 lore raw

PATCH v4 5/12 rockchip: tpl: use IS_ENABLED for timer_init() call condition

In reply to Johan Jonker

Not all Rockchip SoC models use the ARM arch timer. Call the function timer_init() only when CONFIG_SYS_ARCH_TIMER is available.
Use the call condition IS_ENABLED to increase build coverage and make the code easier to read.

---
 arch/arm/mach-rockchip/tpl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm/mach-rockchip/tpl.c +3 -2
index 2b561264a5..05deba3f84 100644
@@ -80,8 +80,9 @@ void board_init_f(ulong dummy)
 	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
 		rockchip_stimer_init();
 
-	/* Init ARM arch timer in arch/arm/cpu/ */
-	timer_init();
+	/* Init ARM arch timer */
+	if (IS_ENABLED(CONFIG_SYS_ARCH_TIMER))
+		timer_init();
 
 	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
 	if (ret) {
Signature · 1 line
2.20.1
Reviewed-by on v4 5/12
#10 lore raw

Re: [PATCH v4 05/12] rockchip: tpl: use IS_ENABLED for timer_init() call condition

Quoted 8 lines · Johan Jonker

Not all Rockchip SoC models use the ARM arch timer. Call the function timer_init() only when CONFIG_SYS_ARCH_TIMER is available.
Use the call condition IS_ENABLED to increase build coverage and make the code easier to read.

Thanks,
- Kever

Quoted 20 lines
---
  arch/arm/mach-rockchip/tpl.c | 5 +++--
  1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm/mach-rockchip/tpl.c +3 -2
index 2b561264a5..05deba3f84 100644
@@ -80,8 +80,9 @@ void board_init_f(ulong dummy)
  	if (IS_ENABLED(CONFIG_ROCKCHIP_STIMER))
  		rockchip_stimer_init();
 
-	/* Init ARM arch timer in arch/arm/cpu/ */
-	timer_init();
+	/* Init ARM arch timer */
+	if (IS_ENABLED(CONFIG_SYS_ARCH_TIMER))
+		timer_init();
 
  	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
  	if (ret) {
#11 lore raw

PATCH v4 6/12 rockchip: timer: add OF_PLATDATA support for dw-apb-timer

In reply to Johan Jonker

The Rockchip rk3066 SoC has 3 dw-apb-timer nodes. U-boot is compiled with OF_PLATDATA TPL/SPL options, so add OF_PLATDATA support for the dw-apb-timer. Also change driver name to be able to compile with U-boot scripts. No reset OF_PLATDATA support was added, because the rk3066 nodes don't need/have them.

---

Changed V3:
use if (CONFIG_IS_ENABLED(OF_REAL))
remove white space fix

Changed V2:
use #if CONFIG_IS_ENABLED(OF_REAL)

---
 drivers/timer/dw-apb-timer.c | 50 ++++++++++++++++++++++++++----------
 1 file changed, 37 insertions(+), 13 deletions(-)
drivers/timer/dw-apb-timer.c +37 -13
index 9aed5dd217..f722697934 100644
@@ -8,10 +8,12 @@
 #include <common.h>
 #include <dm.h>
 #include <clk.h>
+#include <dt-structs.h>
 #include <malloc.h>
 #include <reset.h>
 #include <timer.h>
 #include <dm/device_compat.h>
+#include <linux/kconfig.h>
 
 #include <asm/io.h>
 #include <asm/arch/timer.h>
@@ -25,6 +27,12 @@ struct dw_apb_timer_priv {
 	struct reset_ctl_bulk resets;
 };
 
+struct dw_apb_timer_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_snps_dw_apb_timer dtplat;
+#endif
+};
+
 static u64 dw_apb_timer_get_count(struct udevice *dev)
 {
 	struct dw_apb_timer_priv *priv = dev_get_priv(dev);
@@ -43,20 +51,33 @@ static int dw_apb_timer_probe(struct udevice *dev)
 	struct dw_apb_timer_priv *priv = dev_get_priv(dev);
 	struct clk clk;
 	int ret;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dw_apb_timer_plat *plat = dev_get_plat(dev);
+	struct dtd_snps_dw_apb_timer *dtplat = &plat->dtplat;
 
-	ret = reset_get_bulk(dev, &priv->resets);
-	if (ret)
-		dev_warn(dev, "Can't get reset: %d\n", ret);
-	else
-		reset_deassert_bulk(&priv->resets);
+	priv->regs = dtplat->reg[0];
 
-	ret = clk_get_by_index(dev, 0, &clk);
-	if (ret)
+	ret = clk_get_by_phandle(dev, &dtplat->clocks[0], &clk);
+	if (ret < 0)
 		return ret;
 
-	uc_priv->clock_rate = clk_get_rate(&clk);
+	uc_priv->clock_rate = dtplat->clock_frequency;
+#endif
+	if (CONFIG_IS_ENABLED(OF_REAL)) {
+		ret = reset_get_bulk(dev, &priv->resets);
+		if (ret)
+			dev_warn(dev, "Can't get reset: %d\n", ret);
+		else
+			reset_deassert_bulk(&priv->resets);
+
+		ret = clk_get_by_index(dev, 0, &clk);
+		if (ret)
+			return ret;
 
-	clk_free(&clk);
+		uc_priv->clock_rate = clk_get_rate(&clk);
+
+		clk_free(&clk);
+	}
 
 	/* init timer */
 	writel(0xffffffff, priv->regs + DW_APB_LOAD_VAL);
@@ -68,9 +89,11 @@ static int dw_apb_timer_probe(struct udevice *dev)
 
 static int dw_apb_timer_of_to_plat(struct udevice *dev)
 {
-	struct dw_apb_timer_priv *priv = dev_get_priv(dev);
+	if (CONFIG_IS_ENABLED(OF_REAL)) {
+		struct dw_apb_timer_priv *priv = dev_get_priv(dev);
 
-	priv->regs = dev_read_addr(dev);
+		priv->regs = dev_read_addr(dev);
+	}
 
 	return 0;
 }
@@ -91,8 +114,8 @@ static const struct udevice_id dw_apb_timer_ids[] = {
 	{}
 };
 
-U_BOOT_DRIVER(dw_apb_timer) = {
-	.name		= "dw_apb_timer",
+U_BOOT_DRIVER(snps_dw_apb_timer) = {
+	.name		= "snps_dw_apb_timer",
 	.id		= UCLASS_TIMER,
 	.ops		= &dw_apb_timer_ops,
 	.probe		= dw_apb_timer_probe,
@@ -100,4 +123,5 @@ U_BOOT_DRIVER(dw_apb_timer) = {
 	.of_to_plat = dw_apb_timer_of_to_plat,
 	.remove		= dw_apb_timer_remove,
 	.priv_auto	= sizeof(struct dw_apb_timer_priv),
+	.plat_auto	= sizeof(struct dw_apb_timer_plat),
 };
Signature · 1 line
2.20.1
Reviewed-by on v4 6/12
#12 lore raw

Re: [PATCH v4 06/12] rockchip: timer: add OF_PLATDATA support for dw-apb-timer

Quoted 9 lines · Johan Jonker

The Rockchip rk3066 SoC has 3 dw-apb-timer nodes. U-boot is compiled with OF_PLATDATA TPL/SPL options, so add OF_PLATDATA support for the dw-apb-timer. Also change driver name to be able to compile with U-boot scripts. No reset OF_PLATDATA support was added, because the rk3066 nodes don't need/have them.

Thanks,
- Kever

Quoted 116 lines

---

Changed V3:
use if (CONFIG_IS_ENABLED(OF_REAL))
remove white space fix

Changed V2:
use #if CONFIG_IS_ENABLED(OF_REAL)

---
  drivers/timer/dw-apb-timer.c | 50 ++++++++++++++++++++++++++----------
  1 file changed, 37 insertions(+), 13 deletions(-)
drivers/timer/dw-apb-timer.c +37 -13
index 9aed5dd217..f722697934 100644
@@ -8,10 +8,12 @@
  #include <common.h>
  #include <dm.h>
  #include <clk.h>
+#include <dt-structs.h>
  #include <malloc.h>
  #include <reset.h>
  #include <timer.h>
  #include <dm/device_compat.h>
+#include <linux/kconfig.h>
 
  #include <asm/io.h>
  #include <asm/arch/timer.h>
@@ -25,6 +27,12 @@ struct dw_apb_timer_priv {
  	struct reset_ctl_bulk resets;
  };
 
+struct dw_apb_timer_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dtd_snps_dw_apb_timer dtplat;
+#endif
+};
+
  static u64 dw_apb_timer_get_count(struct udevice *dev)
  {
  	struct dw_apb_timer_priv *priv = dev_get_priv(dev);
@@ -43,20 +51,33 @@ static int dw_apb_timer_probe(struct udevice *dev)
  	struct dw_apb_timer_priv *priv = dev_get_priv(dev);
  	struct clk clk;
  	int ret;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+	struct dw_apb_timer_plat *plat = dev_get_plat(dev);
+	struct dtd_snps_dw_apb_timer *dtplat = &plat->dtplat;
 
-	ret = reset_get_bulk(dev, &priv->resets);
-	if (ret)
-		dev_warn(dev, "Can't get reset: %d\n", ret);
-	else
-		reset_deassert_bulk(&priv->resets);
+	priv->regs = dtplat->reg[0];
 
-	ret = clk_get_by_index(dev, 0, &clk);
-	if (ret)
+	ret = clk_get_by_phandle(dev, &dtplat->clocks[0], &clk);
+	if (ret < 0)
  		return ret;
 
-	uc_priv->clock_rate = clk_get_rate(&clk);
+	uc_priv->clock_rate = dtplat->clock_frequency;
+#endif
+	if (CONFIG_IS_ENABLED(OF_REAL)) {
+		ret = reset_get_bulk(dev, &priv->resets);
+		if (ret)
+			dev_warn(dev, "Can't get reset: %d\n", ret);
+		else
+			reset_deassert_bulk(&priv->resets);
+
+		ret = clk_get_by_index(dev, 0, &clk);
+		if (ret)
+			return ret;
 
-	clk_free(&clk);
+		uc_priv->clock_rate = clk_get_rate(&clk);
+
+		clk_free(&clk);
+	}
 
  	/* init timer */
  	writel(0xffffffff, priv->regs + DW_APB_LOAD_VAL);
@@ -68,9 +89,11 @@ static int dw_apb_timer_probe(struct udevice *dev)
 
  static int dw_apb_timer_of_to_plat(struct udevice *dev)
  {
-	struct dw_apb_timer_priv *priv = dev_get_priv(dev);
+	if (CONFIG_IS_ENABLED(OF_REAL)) {
+		struct dw_apb_timer_priv *priv = dev_get_priv(dev);
 
-	priv->regs = dev_read_addr(dev);
+		priv->regs = dev_read_addr(dev);
+	}
 
  	return 0;
  }
@@ -91,8 +114,8 @@ static const struct udevice_id dw_apb_timer_ids[] = {
  	{}
  };
 
-U_BOOT_DRIVER(dw_apb_timer) = {
-	.name		= "dw_apb_timer",
+U_BOOT_DRIVER(snps_dw_apb_timer) = {
+	.name		= "snps_dw_apb_timer",
  	.id		= UCLASS_TIMER,
  	.ops		= &dw_apb_timer_ops,
  	.probe		= dw_apb_timer_probe,
@@ -100,4 +123,5 @@ U_BOOT_DRIVER(dw_apb_timer) = {
  	.of_to_plat = dw_apb_timer_of_to_plat,
  	.remove		= dw_apb_timer_remove,
  	.priv_auto	= sizeof(struct dw_apb_timer_priv),
+	.plat_auto	= sizeof(struct dw_apb_timer_plat),
  };
#13 lore raw

PATCH v4 7/12 rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure

In reply to Johan Jonker

The line with .of_to_plat in the U_BOOT_DRIVER structure of dw-apb-timer.c is not aligned with the rest. Add an extra TAB to fix the whitespace.

---
 drivers/timer/dw-apb-timer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/timer/dw-apb-timer.c +1 -1
index f722697934..10f0a9f646 100644
@@ -120,7 +120,7 @@ U_BOOT_DRIVER(snps_dw_apb_timer) = {
 	.ops		= &dw_apb_timer_ops,
 	.probe		= dw_apb_timer_probe,
 	.of_match	= dw_apb_timer_ids,
-	.of_to_plat = dw_apb_timer_of_to_plat,
+	.of_to_plat	= dw_apb_timer_of_to_plat,
 	.remove		= dw_apb_timer_remove,
 	.priv_auto	= sizeof(struct dw_apb_timer_priv),
 	.plat_auto	= sizeof(struct dw_apb_timer_plat),
Signature · 1 line
2.20.1
Reviewed-by on v4 7/12
#14 lore raw

Re: [PATCH v4 07/12] rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure

Quoted 6 lines · Johan Jonker

The line with .of_to_plat in the U_BOOT_DRIVER structure of dw-apb-timer.c is not aligned with the rest. Add an extra TAB to fix the whitespace.

Thanks,
- Kever

Quoted 17 lines
---
  drivers/timer/dw-apb-timer.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/timer/dw-apb-timer.c +1 -1
index f722697934..10f0a9f646 100644
@@ -120,7 +120,7 @@ U_BOOT_DRIVER(snps_dw_apb_timer) = {
  	.ops		= &dw_apb_timer_ops,
  	.probe		= dw_apb_timer_probe,
  	.of_match	= dw_apb_timer_ids,
-	.of_to_plat = dw_apb_timer_of_to_plat,
+	.of_to_plat	= dw_apb_timer_of_to_plat,
  	.remove		= dw_apb_timer_remove,
  	.priv_auto	= sizeof(struct dw_apb_timer_priv),
  	.plat_auto	= sizeof(struct dw_apb_timer_plat),
#15 lore raw

PATCH v4 8/12 rockchip: mmc: rockchip_dw_mmc: fix ciu clock index

In reply to Johan Jonker

The document rockchip-dw-mshc.yaml decribes a maximum of 4 clocks. In the rockchip_dw_mmc driver the clock name in use was "fixed" to "ciu" with index 1, but later reverted back to index 0. The clock drivers can handle both, but the calling driver should submit correct data as a standard practice.
Fix the "ciu" clock index by setting it back to 1.

clock-names:
minItems: 2
items:
- const: biu
- const: ciu
- const: ciu-drive
- const: ciu-sample

---
 drivers/mmc/rockchip_dw_mmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mmc/rockchip_dw_mmc.c +2 -2
index 7f8dea1e34..be065ec0c3 100644
@@ -123,11 +123,11 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 	priv->minmax[0] = 400000;  /*  400 kHz */
 	priv->minmax[1] = dtplat->max_frequency;
 
-	ret = clk_get_by_phandle(dev, dtplat->clocks, &priv->clk);
+	ret = clk_get_by_phandle(dev, &dtplat->clocks[1], &priv->clk);
 	if (ret < 0)
 		return ret;
 #else
-	ret = clk_get_by_index(dev, 0, &priv->clk);
+	ret = clk_get_by_index(dev, 1, &priv->clk);
 	if (ret < 0)
 		return ret;
 #endif
Signature · 1 line
2.20.1
Reviewed-by on v4 8/12
#16 lore raw

Re: [PATCH v4 08/12] rockchip: mmc: rockchip_dw_mmc: fix ciu clock index

Quoted 15 lines · Johan Jonker

The document rockchip-dw-mshc.yaml decribes a maximum of 4 clocks. In the rockchip_dw_mmc driver the clock name in use was "fixed" to "ciu" with index 1, but later reverted back to index 0. The clock drivers can handle both, but the calling driver should submit correct data as a standard practice.
Fix the "ciu" clock index by setting it back to 1.

clock-names:
minItems: 2
items:
- const: biu
- const: ciu
- const: ciu-drive
- const: ciu-sample

Quoted 1 line

Thanks,
- Kever

Quoted 22 lines
---
  drivers/mmc/rockchip_dw_mmc.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mmc/rockchip_dw_mmc.c +2 -2
index 7f8dea1e34..be065ec0c3 100644
@@ -123,11 +123,11 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
  	priv->minmax[0] = 400000;  /*  400 kHz */
  	priv->minmax[1] = dtplat->max_frequency;
 
-	ret = clk_get_by_phandle(dev, dtplat->clocks, &priv->clk);
+	ret = clk_get_by_phandle(dev, &dtplat->clocks[1], &priv->clk);
  	if (ret < 0)
  		return ret;
  #else
-	ret = clk_get_by_index(dev, 0, &priv->clk);
+	ret = clk_get_by_index(dev, 1, &priv->clk);
  	if (ret < 0)
  		return ret;
  #endif
#17 lore raw

PATCH v4 9/12 rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support

In reply to Johan Jonker

The Rockchip SoCs rk3066/rk3188 have mmc DT nodes with as compatible string "rockchip,rk2928-dw-mshc". Add support to the existing driver with help of a DM_DRIVER_ALIAS.

This type needs a permanent enabled fifo.
The other Rockchip SoCs not always have the property "fifo-mode" in the TPL/SPL DT nodes, so dtplat structures can't be used to switch it on.
Add a data structure linked to the compatible string to enable.

---

Changed V4:
use boolean

---
 drivers/mmc/rockchip_dw_mmc.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/mmc/rockchip_dw_mmc.c +13 -3
index be065ec0c3..45488dd7bd 100644
@@ -19,6 +19,11 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
+enum rockchip_dwmmc_type {
+	RK2928_MSHC,
+	RK3288_MSHC,
+};
+
 struct rockchip_mmc_plat {
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct dtd_rockchip_rk3288_dw_mshc dtplat;
@@ -111,6 +116,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct dtd_rockchip_rk3288_dw_mshc *dtplat = &plat->dtplat;
+	enum rockchip_dwmmc_type type = dev_get_driver_data(dev);
 
 	host->name = dev->name;
 	host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
@@ -119,7 +125,10 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 	host->priv = dev;
 	host->dev_index = 0;
 	priv->fifo_depth = dtplat->fifo_depth;
-	priv->fifo_mode = 0;
+	if (type == RK2928_MSHC)
+		priv->fifo_mode = true;
+	else
+		priv->fifo_mode = false;
 	priv->minmax[0] = 400000;  /*  400 kHz */
 	priv->minmax[1] = dtplat->max_frequency;
 
@@ -163,8 +172,8 @@ static int rockchip_dwmmc_bind(struct udevice *dev)
 }
 
 static const struct udevice_id rockchip_dwmmc_ids[] = {
-	{ .compatible = "rockchip,rk2928-dw-mshc" },
-	{ .compatible = "rockchip,rk3288-dw-mshc" },
+	{ .compatible = "rockchip,rk2928-dw-mshc", .data = RK2928_MSHC },
+	{ .compatible = "rockchip,rk3288-dw-mshc", .data = RK3288_MSHC },
 	{ }
 };
 
@@ -180,5 +189,6 @@ U_BOOT_DRIVER(rockchip_rk3288_dw_mshc) = {
 	.plat_auto	= sizeof(struct rockchip_mmc_plat),
 };
 
+DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk2928_dw_mshc)
 DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3328_dw_mshc)
 DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3368_dw_mshc)
Signature · 1 line
2.20.1
#18 lore raw

Re: [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support

Hi Johan,

Quoted 9 lines · Johan Jonker

The Rockchip SoCs rk3066/rk3188 have mmc DT nodes with as compatible string "rockchip,rk2928-dw-mshc". Add support to the existing driver with help of a DM_DRIVER_ALIAS.

This type needs a permanent enabled fifo.
The other Rockchip SoCs not always have the property "fifo-mode" in the TPL/SPL DT nodes, so dtplat structures can't be used to switch it on.

There is an option "u-boot,spl-fifo-mode", which already used for many SoCs,

could you try with it?

Thanks,

- Kever

Quoted 66 lines

Add a data structure linked to the compatible string to enable.

---

Changed V4:
use boolean

---
  drivers/mmc/rockchip_dw_mmc.c | 16 +++++++++++++---
  1 file changed, 13 insertions(+), 3 deletions(-)
drivers/mmc/rockchip_dw_mmc.c +13 -3
index be065ec0c3..45488dd7bd 100644
@@ -19,6 +19,11 @@
  #include <linux/delay.h>
  #include <linux/err.h>
 
+enum rockchip_dwmmc_type {
+	RK2928_MSHC,
+	RK3288_MSHC,
+};
+
  struct rockchip_mmc_plat {
  #if CONFIG_IS_ENABLED(OF_PLATDATA)
  	struct dtd_rockchip_rk3288_dw_mshc dtplat;
@@ -111,6 +116,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 
  #if CONFIG_IS_ENABLED(OF_PLATDATA)
  	struct dtd_rockchip_rk3288_dw_mshc *dtplat = &plat->dtplat;
+	enum rockchip_dwmmc_type type = dev_get_driver_data(dev);
 
  	host->name = dev->name;
  	host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
@@ -119,7 +125,10 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
  	host->priv = dev;
  	host->dev_index = 0;
  	priv->fifo_depth = dtplat->fifo_depth;
-	priv->fifo_mode = 0;
+	if (type == RK2928_MSHC)
+		priv->fifo_mode = true;
+	else
+		priv->fifo_mode = false;
  	priv->minmax[0] = 400000;  /*  400 kHz */
  	priv->minmax[1] = dtplat->max_frequency;
 
@@ -163,8 +172,8 @@ static int rockchip_dwmmc_bind(struct udevice *dev)
  }
 
  static const struct udevice_id rockchip_dwmmc_ids[] = {
-	{ .compatible = "rockchip,rk2928-dw-mshc" },
-	{ .compatible = "rockchip,rk3288-dw-mshc" },
+	{ .compatible = "rockchip,rk2928-dw-mshc", .data = RK2928_MSHC },
+	{ .compatible = "rockchip,rk3288-dw-mshc", .data = RK3288_MSHC },
  	{ }
  };
 
@@ -180,5 +189,6 @@ U_BOOT_DRIVER(rockchip_rk3288_dw_mshc) = {
  	.plat_auto	= sizeof(struct rockchip_mmc_plat),
  };
 
+DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk2928_dw_mshc)
  DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3328_dw_mshc)
  DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3368_dw_mshc)
#19 lore raw

Re: [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support

Hi,

Quoted 13 lines · Kever Yang

Hi Johan,

Quoted 9 lines · Johan Jonker

The Rockchip SoCs rk3066/rk3188 have mmc DT nodes with as compatible string "rockchip,rk2928-dw-mshc". Add support to the existing driver with help of a DM_DRIVER_ALIAS.

This type needs a permanent enabled fifo.
The other Rockchip SoCs not always have the property "fifo-mode" in the TPL/SPL DT nodes, so dtplat structures can't be used to switch it on.

Quoted 4 lines

There is an option "u-boot,spl-fifo-mode", which already used for many SoCs,

could you try with it?

Rk3066 SPL makes use of dt-plat.c to describe the DT, because of memory size and it's BOOTROM doesn't have build-in SD card support like the later models.

u-boot-tpl.bin : 25,112 bytes
u-boot-spl.bin : 39,280 bytes
u-boot-dtb.img : 328,678 bytes

Example rockchip_dwmmc_probe function:

old:
priv->fifo_mode = 0;

vs.

new:
priv->fifo_mode = dtplat->u_boot_spl_fifo_mode

The use of u_boot_spl_fifo_mode in C code would make it a requirement for other SoC types to include it in "static struct dtd_rockchip_rk3288_dw_mshc" as well:

.u_boot_spl_fifo_mode = false,

Please advise how to get progress here as.

Kind regards,

Johan

===

static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_10214000 = {
	.bus_width		= 0x4,
	.cap_mmc_highspeed	= true,
	.cap_sd_highspeed	= true,
	.clock_frequency	= 0x2faf080,
	.clocks			= {
			{0, {448}},
			{0, {72}},},
	.dma_names		= "rx-tx",
	.dmas			= {0xa, 0x1},
	.fifo_depth		= 0x100,
	.fifo_mode		= true,
	.max_frequency		= 0x3d0900,
	.reg			= {0x10214000, 0x1000},
	.reset_names		= "reset",
	.resets			= {0x2, 0x51},

	.u_boot_spl_fifo_mode	= true,

	.vmmc_supply		= 0xf,
};
U_BOOT_DRVINFO(mmc_at_10214000) = {
	.name		= "rockchip_rk3288_dw_mshc",
	.plat		= &dtv_mmc_at_10214000,
	.plat_size	= sizeof(dtv_mmc_at_10214000),
	.parent_idx	= -1,
};
Quoted 66 lines

Thanks,

- Kever

Quoted 60 lines

Add a data structure linked to the compatible string to enable.

---

Changed V4:
   use boolean
---
  drivers/mmc/rockchip_dw_mmc.c | 16 +++++++++++++---

  1 file changed, 13 insertions(+), 3 deletions(-)
drivers/mmc/rockchip_dw_mmc.c +9 -1
index be065ec0c3..45488dd7bd 100644
@@ -19,6 +19,11 @@
   #include <linux/delay.h>
   #include <linux/err.h>
   +enum rockchip_dwmmc_type {
+    RK2928_MSHC,
+    RK3288_MSHC,
+};
+
   struct rockchip_mmc_plat {
   #if CONFIG_IS_ENABLED(OF_PLATDATA)
       struct dtd_rockchip_rk3288_dw_mshc dtplat;
@@ -111,6 +116,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
     #if CONFIG_IS_ENABLED(OF_PLATDATA)
       struct dtd_rockchip_rk3288_dw_mshc *dtplat = &plat->dtplat;
+    enum rockchip_dwmmc_type type = dev_get_driver_data(dev);
         host->name = dev->name;
       host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
@@ -119,7 +125,10 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
       host->priv = dev;
       host->dev_index = 0;
       priv->fifo_depth = dtplat->fifo_depth;
-    priv->fifo_mode = 0;
+    if (type == RK2928_MSHC)
+        priv->fifo_mode = true;
+    else
+        priv->fifo_mode = false;

      priv->minmax[0] = 400000;  /*  400 kHz */ priv->minmax[1] = dtplat->max_frequency;
  @@ -163,8 +172,8 @@ static int rockchip_dwmmc_bind(struct udevice *dev) }
    static const struct udevice_id rockchip_dwmmc_ids[] = {
-    { .compatible = "rockchip,rk2928-dw-mshc" },
-    { .compatible = "rockchip,rk3288-dw-mshc" },
+    { .compatible = "rockchip,rk2928-dw-mshc", .data = RK2928_MSHC }, +    { .compatible = "rockchip,rk3288-dw-mshc", .data = RK3288_MSHC }, { }
  };
  @@ -180,5 +189,6 @@ U_BOOT_DRIVER(rockchip_rk3288_dw_mshc) = { .plat_auto    = sizeof(struct rockchip_mmc_plat),
  };
  +DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk2928_dw_mshc) DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3328_dw_mshc) DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3368_dw_mshc)

#20 lore raw

Re: [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support

Quoted 39 lines · Johan Jonker

Hi,

Quoted 8 lines · Kever Yang

Hi Johan,

Quoted 5 lines · Johan Jonker

The Rockchip SoCs rk3066/rk3188 have mmc DT nodes with as compatible string "rockchip,rk2928-dw-mshc". Add support to the existing driver with help of a DM_DRIVER_ALIAS.

Quoted 8 lines
Quoted 4 lines

This type needs a permanent enabled fifo.
The other Rockchip SoCs not always have the property "fifo-mode" in the TPL/SPL DT nodes, so dtplat structures can't be used to switch it on.

There is an option "u-boot,spl-fifo-mode", which already used for many SoCs,

could you try with it?

Rk3066 SPL makes use of dt-plat.c to describe the DT, because of memory size and it's BOOTROM doesn't have build-in SD card support like the later models.

u-boot-tpl.bin : 25,112 bytes
u-boot-spl.bin : 39,280 bytes
u-boot-dtb.img : 328,678 bytes

Example rockchip_dwmmc_probe function:

old:
priv->fifo_mode = 0;

vs.

new:
priv->fifo_mode = dtplat->u_boot_spl_fifo_mode

Quoted 5 lines

The use of u_boot_spl_fifo_mode in C code would make it a requirement for other SoC types to include it in "static struct dtd_rockchip_rk3288_dw_mshc" as well:

.u_boot_spl_fifo_mode = false,

Yes, extend the dt-plat with new fifo mode support will be OK.

BTW: rk3288 can also use fifo-mode in SPL in dt-plat mode, so you can re-use this structure

and no need to add a new one.

Thanks,

- Kever

Quoted 103 lines

Please advise how to get progress here as.

Kind regards,

Johan

===

static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_10214000 = {
	.bus_width		= 0x4,
	.cap_mmc_highspeed	= true,
	.cap_sd_highspeed	= true,
	.clock_frequency	= 0x2faf080,
	.clocks			= {
			{0, {448}},
			{0, {72}},},
	.dma_names		= "rx-tx",
	.dmas			= {0xa, 0x1},
	.fifo_depth		= 0x100,
	.fifo_mode		= true,
	.max_frequency		= 0x3d0900,
	.reg			= {0x10214000, 0x1000},
	.reset_names		= "reset",
	.resets			= {0x2, 0x51},

	.u_boot_spl_fifo_mode	= true,

	.vmmc_supply		= 0xf,
};
U_BOOT_DRVINFO(mmc_at_10214000) = {
	.name		= "rockchip_rk3288_dw_mshc",
	.plat		= &dtv_mmc_at_10214000,
	.plat_size	= sizeof(dtv_mmc_at_10214000),
	.parent_idx	= -1,
};
Quoted 65 lines

Thanks,

- Kever

Quoted 60 lines

Add a data structure linked to the compatible string to enable.

---

Changed V4:
   use boolean

---
   drivers/mmc/rockchip_dw_mmc.c | 16 +++++++++++++---
   1 file changed, 13 insertions(+), 3 deletions(-)
drivers/mmc/rockchip_dw_mmc.c +9 -1
index be065ec0c3..45488dd7bd 100644
@@ -19,6 +19,11 @@
   #include <linux/delay.h>
   #include <linux/err.h>
   +enum rockchip_dwmmc_type {
+    RK2928_MSHC,
+    RK3288_MSHC,
+};
+
   struct rockchip_mmc_plat {
   #if CONFIG_IS_ENABLED(OF_PLATDATA)
       struct dtd_rockchip_rk3288_dw_mshc dtplat;
@@ -111,6 +116,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
     #if CONFIG_IS_ENABLED(OF_PLATDATA)
       struct dtd_rockchip_rk3288_dw_mshc *dtplat = &plat->dtplat;
+    enum rockchip_dwmmc_type type = dev_get_driver_data(dev);
         host->name = dev->name;
       host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
@@ -119,7 +125,10 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
       host->priv = dev;
       host->dev_index = 0;
       priv->fifo_depth = dtplat->fifo_depth;
-    priv->fifo_mode = 0;
+    if (type == RK2928_MSHC)
+        priv->fifo_mode = true;
+    else
+        priv->fifo_mode = false;
       priv->minmax[0] = 400000;  /*  400 kHz */
       priv->minmax[1] = dtplat->max_frequency;
   @@ -163,8 +172,8 @@ static int rockchip_dwmmc_bind(struct udevice *dev)

  }
    static const struct udevice_id rockchip_dwmmc_ids[] = {
-    { .compatible = "rockchip,rk2928-dw-mshc" },
-    { .compatible = "rockchip,rk3288-dw-mshc" },
+    { .compatible = "rockchip,rk2928-dw-mshc", .data = RK2928_MSHC }, +    { .compatible = "rockchip,rk3288-dw-mshc", .data = RK3288_MSHC },
      { }
  };
  @@ -180,5 +189,6 @@ U_BOOT_DRIVER(rockchip_rk3288_dw_mshc) = { .plat_auto    = sizeof(struct rockchip_mmc_plat),
  };
  +DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk2928_dw_mshc) DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3328_dw_mshc) DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3368_dw_mshc)

#21 lore raw

PATCH v4 10/12 rockchip: serial: restyle the serial_rockchip.c driver

In reply to Johan Jonker

The ns16550.c driver has the following conditions for .of_match:

CONFIG_IS_ENABLED(OF_REAL)

For Rockchip SoCs with TPL/SPL and platform data that need serial support the serial_rockchip.c driver was made. It copies this data and then calls ns16550_serial_probe(). With the addition of yet an other SoC type this driver is in need for a little restyle. Simplify struct rockchip_uart_plat and add extra SoCs with DM_DRIVER_ALIAS(). Return -ENODEV when the ns16550.c driver probe function is available.

---

Changed V4:
add empty line

---
 drivers/serial/serial_rockchip.c | 37 +++++++++++++-------------------
 1 file changed, 15 insertions(+), 22 deletions(-)
drivers/serial/serial_rockchip.c +15 -22
index 97d40869a2..f5ac705f4d 100644
@@ -12,22 +12,20 @@
 #include <asm/arch-rockchip/clock.h>
 #include <dm/device-internal.h>
 
-#if defined(CONFIG_ROCKCHIP_RK3188)
-struct rockchip_uart_plat {
-	struct dtd_rockchip_rk3188_uart dtplat;
-	struct ns16550_plat plat;
-};
-struct dtd_rockchip_rk3188_uart *dtplat, s_dtplat;
-#elif defined(CONFIG_ROCKCHIP_RK3288)
 struct rockchip_uart_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct dtd_rockchip_rk3288_uart dtplat;
+#endif
 	struct ns16550_plat plat;
 };
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
 struct dtd_rockchip_rk3288_uart *dtplat, s_dtplat;
 #endif
 
 static int rockchip_serial_probe(struct udevice *dev)
 {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct rockchip_uart_plat *plat = dev_get_plat(dev);
 
 	/* Create some new platform data for the standard driver */
@@ -38,24 +36,19 @@ static int rockchip_serial_probe(struct udevice *dev)
 	dev_set_plat(dev, &plat->plat);
 
 	return ns16550_serial_probe(dev);
+#else
+	return -ENODEV;
+#endif
 }
 
-U_BOOT_DRIVER(rockchip_rk3188_uart) = {
-	.name	= "rockchip_rk3188_uart",
-	.id	= UCLASS_SERIAL,
-	.priv_auto	= sizeof(struct ns16550),
-	.plat_auto	= sizeof(struct rockchip_uart_plat),
-	.probe	= rockchip_serial_probe,
-	.ops	= &ns16550_serial_ops,
-	.flags	= DM_FLAG_PRE_RELOC,
-};
-
 U_BOOT_DRIVER(rockchip_rk3288_uart) = {
-	.name	= "rockchip_rk3288_uart",
-	.id	= UCLASS_SERIAL,
+	.name		= "rockchip_rk3288_uart",
+	.id		= UCLASS_SERIAL,
 	.priv_auto	= sizeof(struct ns16550),
 	.plat_auto	= sizeof(struct rockchip_uart_plat),
-	.probe	= rockchip_serial_probe,
-	.ops	= &ns16550_serial_ops,
-	.flags	= DM_FLAG_PRE_RELOC,
+	.probe		= rockchip_serial_probe,
+	.ops		= &ns16550_serial_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
 };
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3066_uart)
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3188_uart)
Signature · 1 line
2.20.1
Reviewed-by on v4 10/12
#22 lore raw

Re: [PATCH v4 10/12] rockchip: serial: restyle the serial_rockchip.c driver

Quoted 12 lines · Johan Jonker

The ns16550.c driver has the following conditions for .of_match:

CONFIG_IS_ENABLED(OF_REAL)

For Rockchip SoCs with TPL/SPL and platform data that need serial support the serial_rockchip.c driver was made. It copies this data and then calls ns16550_serial_probe(). With the addition of yet an other SoC type this driver is in need for a little restyle. Simplify struct rockchip_uart_plat and add extra SoCs with DM_DRIVER_ALIAS(). Return -ENODEV when the ns16550.c driver probe function is available.

Quoted 2 lines

Thanks,
- Kever

Quoted 75 lines

---

Changed V4:
add empty line

---
  drivers/serial/serial_rockchip.c | 37 +++++++++++++-------------------
  1 file changed, 15 insertions(+), 22 deletions(-)
drivers/serial/serial_rockchip.c +15 -22
index 97d40869a2..f5ac705f4d 100644
@@ -12,22 +12,20 @@
  #include <asm/arch-rockchip/clock.h>
  #include <dm/device-internal.h>
 
-#if defined(CONFIG_ROCKCHIP_RK3188)
-struct rockchip_uart_plat {
-	struct dtd_rockchip_rk3188_uart dtplat;
-	struct ns16550_plat plat;
-};
-struct dtd_rockchip_rk3188_uart *dtplat, s_dtplat;
-#elif defined(CONFIG_ROCKCHIP_RK3288)
  struct rockchip_uart_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
  	struct dtd_rockchip_rk3288_uart dtplat;
+#endif
  	struct ns16550_plat plat;
  };
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
  struct dtd_rockchip_rk3288_uart *dtplat, s_dtplat;
  #endif
 
  static int rockchip_serial_probe(struct udevice *dev)
  {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
  	struct rockchip_uart_plat *plat = dev_get_plat(dev);
 
  	/* Create some new platform data for the standard driver */
@@ -38,24 +36,19 @@ static int rockchip_serial_probe(struct udevice *dev)
  	dev_set_plat(dev, &plat->plat);
 
  	return ns16550_serial_probe(dev);
+#else
+	return -ENODEV;
+#endif
  }
 
-U_BOOT_DRIVER(rockchip_rk3188_uart) = {
-	.name	= "rockchip_rk3188_uart",
-	.id	= UCLASS_SERIAL,
-	.priv_auto	= sizeof(struct ns16550),
-	.plat_auto	= sizeof(struct rockchip_uart_plat),
-	.probe	= rockchip_serial_probe,
-	.ops	= &ns16550_serial_ops,
-	.flags	= DM_FLAG_PRE_RELOC,
-};
-
  U_BOOT_DRIVER(rockchip_rk3288_uart) = {
-	.name	= "rockchip_rk3288_uart",
-	.id	= UCLASS_SERIAL,
+	.name		= "rockchip_rk3288_uart",
+	.id		= UCLASS_SERIAL,
  	.priv_auto	= sizeof(struct ns16550),
  	.plat_auto	= sizeof(struct rockchip_uart_plat),
-	.probe	= rockchip_serial_probe,
-	.ops	= &ns16550_serial_ops,
-	.flags	= DM_FLAG_PRE_RELOC,
+	.probe		= rockchip_serial_probe,
+	.ops		= &ns16550_serial_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
  };
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3066_uart)
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3188_uart)
#23 lore raw

PATCH v4 11/12 rockchip: serial: move driver alias to serial_rockchip.c

In reply to Johan Jonker

The Rockchip uart DT nodes have "snps,dw-apb-uart" as
fall back string. The driver ns16550.c has CONFIG_IS_ENABLED(OF_REAL) as condition to of_match and does not copy dtplat data. For TPL/SPL the driver serial_rockchip.c
is used. Move driver alias to correct driver.

---
 drivers/serial/ns16550.c         | 2 --
 drivers/serial/serial_rockchip.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/serial/ns16550.c +0 -2
index 796ff1658c..a4220fd0ae 100644
@@ -624,8 +624,6 @@ U_BOOT_DRIVER(ns16550_serial) = {
 #endif
 };
 
-DM_DRIVER_ALIAS(ns16550_serial, rockchip_rk3328_uart)
-DM_DRIVER_ALIAS(ns16550_serial, rockchip_rk3368_uart)
 DM_DRIVER_ALIAS(ns16550_serial, ti_da830_uart)
 #endif
 #endif /* SERIAL_PRESENT */
drivers/serial/serial_rockchip.c +2 -0
index f5ac705f4d..10e731caa1 100644
@@ -52,3 +52,5 @@ U_BOOT_DRIVER(rockchip_rk3288_uart) = {
 };
 DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3066_uart)
 DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3188_uart)
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3328_uart)
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3368_uart)
Signature · 1 line
2.20.1
Reviewed-by on v4 11/12
#24 lore raw

Re: [PATCH v4 11/12] rockchip: serial: move driver alias to serial_rockchip.c

Quoted 8 lines · Johan Jonker

The Rockchip uart DT nodes have "snps,dw-apb-uart" as
fall back string. The driver ns16550.c has CONFIG_IS_ENABLED(OF_REAL) as condition to of_match and does not copy dtplat data. For TPL/SPL the driver serial_rockchip.c
is used. Move driver alias to correct driver.

Thanks,
- Kever

Quoted 28 lines
---
  drivers/serial/ns16550.c         | 2 --
  drivers/serial/serial_rockchip.c | 2 ++
  2 files changed, 2 insertions(+), 2 deletions(-)
drivers/serial/ns16550.c +0 -2
index 796ff1658c..a4220fd0ae 100644
@@ -624,8 +624,6 @@ U_BOOT_DRIVER(ns16550_serial) = {
  #endif
  };
 
-DM_DRIVER_ALIAS(ns16550_serial, rockchip_rk3328_uart)
-DM_DRIVER_ALIAS(ns16550_serial, rockchip_rk3368_uart)
  DM_DRIVER_ALIAS(ns16550_serial, ti_da830_uart)
  #endif
  #endif /* SERIAL_PRESENT */
drivers/serial/serial_rockchip.c +2 -0
index f5ac705f4d..10e731caa1 100644
@@ -52,3 +52,5 @@ U_BOOT_DRIVER(rockchip_rk3288_uart) = {
  };
  DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3066_uart)
  DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3188_uart)
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3328_uart)
+DM_DRIVER_ALIAS(rockchip_rk3288_uart, rockchip_rk3368_uart)
#25 lore raw

PATCH v4 12/12 rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL

In reply to Johan Jonker

The Rockchip serial driver depends on an enabled NS16550 driver, so add select SYS_NS16550 to config ROCKCHIP_SERIAL.

---
 drivers/serial/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/serial/Kconfig +1 -0
index 76171e7146..06a69e78de 100644
@@ -763,6 +763,7 @@ config PL01X_SERIAL
 config ROCKCHIP_SERIAL
 	bool "Rockchip on-chip UART support"
 	depends on DM_SERIAL && SPL_OF_PLATDATA
+	select SYS_NS16550
 	help
 	  Select this to enable a debug UART for Rockchip devices when using
 	  CONFIG_SPL_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
Signature · 1 line
2.20.1
Reviewed-by on v4 12/12
#26 lore raw

Re: [PATCH v4 12/12] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL

Quoted 5 lines · Johan Jonker

The Rockchip serial driver depends on an enabled NS16550 driver, so add select SYS_NS16550 to config ROCKCHIP_SERIAL.

Thanks,
- Kever

Quoted 16 lines
---
  drivers/serial/Kconfig | 1 +
  1 file changed, 1 insertion(+)
drivers/serial/Kconfig +1 -0
index 76171e7146..06a69e78de 100644
@@ -763,6 +763,7 @@ config PL01X_SERIAL
  config ROCKCHIP_SERIAL
  	bool "Rockchip on-chip UART support"
  	depends on DM_SERIAL && SPL_OF_PLATDATA
+	select SYS_NS16550
  	help
  	  Select this to enable a debug UART for Rockchip devices when using
  	  CONFIG_SPL_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).