Skip to contentSkip to conversation

printk/index: Printk index feature documentation

PATCH In review Petr Mladek 2 participants 4 messages Apr 5, 2022 – Apr 13, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 printk/index: Printk index feature documentation

Document the printk index feature. The primary motivation is to explain that it is not creating KABI from particular printk() calls.

---
Changes against RFC[*]:

+ Updated text by feedback from Darrick.
+ Updated index.rst and MAINTAINERS.
+ Tested build of the html documentation.

Did not add Sergey's ack because there were some changes.

[*] https://lore.kernel.org/r/[email protected]

 Documentation/core-api/index.rst        |   1 +
 Documentation/core-api/printk-index.rst | 136 ++++++++++++++++++++++++
 MAINTAINERS                             |   1 +
 3 files changed, 138 insertions(+)
 create mode 100644 Documentation/core-api/printk-index.rst
Documentation/core-api/index.rst +1 -0
index 972d46a5ddf6..8a3fce1fe582 100644
@@ -20,6 +20,7 @@ it.
    workqueue
    printk-basics
    printk-formats
+   printk-index
    symbol-namespaces
 
 Data structures and low-level utilities
Documentation/core-api/printk-index.rst new file +136 -0

136 lines not on this page · raw message

MAINTAINERS +1 -0
index fd768d43e048..ad8625130ea9 100644
@@ -15855,6 +15855,7 @@ F:	kernel/printk/
 PRINTK INDEXING
 R:	Chris Down <[email protected]>
 S:	Maintained
+F:	Documentation/core-api/printk-index.rst
 F:	kernel/printk/index.c
 
 PROC FILESYSTEM
Signature · 1 line
2.26.2
reviewer Reviewed-by on v1 1/1
#1 lore raw
Quoted 5 lines · Petr Mladek

Document the printk index feature. The primary motivation is to explain that it is not creating KABI from particular printk() calls.

This looks great, thanks a lot for spending the time to write this up. Just some very minor comments.

Quoted 71 lines

---
Changes against RFC[*]:

+ Updated text by feedback from Darrick.
+ Updated index.rst and MAINTAINERS.
+ Tested build of the html documentation.

Did not add Sergey's ack because there were some changes.

[*] https://lore.kernel.org/r/[email protected]

Documentation/core-api/index.rst        |   1 +
Documentation/core-api/printk-index.rst | 136 ++++++++++++++++++++++++
MAINTAINERS                             |   1 +
3 files changed, 138 insertions(+)

create mode 100644 Documentation/core-api/printk-index.rst

Documentation/core-api/index.rst +1 -0
index 972d46a5ddf6..8a3fce1fe582 100644
@@ -20,6 +20,7 @@ it.
   workqueue
   printk-basics
   printk-formats
+   printk-index
   symbol-namespaces
 

Data structures and low-level utilities

Documentation/core-api/printk-index.rst new file +36 -0
new file mode 100644
index 000000000000..0de380b4a67c
@@ -0,0 +1,136 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Printk Index
+============
+
+There are many ways how to monitor the state of the system. One important
+source of information is the system log. It provides a lot of information,
+including more or less important warnings and error messages.
+
+There are monitoring tools that filter and take action based on messages
+logged.
+
+The kernel messages are evolving together with the code. As a result,
+particular kernel messages are not KABI and never will be!
+
+It is a huge challenge for maintaining the system log monitors. It requires
+knowing what messages were updated in a particular kernel version and why.
+Finding these changes in the sources would require non-trivial parsers.
+Also it would require matching the sources with the binary kernel which
+is not always trivial. Various changes might be backported. Various kernel
+versions might be used on different monitored systems.
+
+This is where the printk index feature might become useful. It provides
+a dump of printk formats used all over the source code used for the kernel
+and modules on the running system. It is accessible at runtime via debugfs.
+
+The printk index helps to find changes in the message formats. Also it helps
+to track the strings back to the kernel sources and the related commit.
+
+
+User Interface
+==============
+
+The index of printk formats are split in into separate files. The files are
+named according to the binaries where the printk formats are built-in. There

Documentation/core-api/printk-index.rst line 46

Quoted 10 lines
Documentation/core-api/printk-index.rst new file +10 -0
+is always "vmlinux" and optionally also modules, for example::
+
+   /sys/kernel/debug/printk/index/vmlinux
+   /sys/kernel/debug/printk/index/ext4
+   /sys/kernel/debug/printk/index/scsi_mod
+
+Note that only loaded modules are shown. Also printk formats from a module
+might appear in "vmlinux" when the module is built-in.
+
+The content is inspired by the dynamic debug interface and looks like::

s/::/:/

Documentation/core-api/printk-index.rst line 58

Quoted 12 lines
Documentation/core-api/printk-index.rst new file +12 -0
+
+   $> head -1 /sys/kernel/debug/printk/index/vmlinux; shuf -n 5 vmlinux
+   # <level[,flags]> filename:line function "format"
+   <5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
+   <4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
+   <6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
+   <6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
+   <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
+
+, where the meaning is::
+
+   - level: log level

Maybe worth noting that level may not be there if we have a KERN_CONT.

Quoted 93 lines
Documentation/core-api/printk-index.rst new file +78 -0
+   - flags: optional flags: currently only 'c' for KERN_CONT
+   - filename:line: source filename and line number of the related
+	printk() call. Note that there are many wrappers, for example,
+	pr_warn(), pr_warn_once(), dev_warn().
+   - function: function name where the printk() call is used.
+   - format: format string
+
+The extra information makes it a bit harder to find differences
+between various kernels. Especially the line number might change
+very often. On the other hand, it helps a lot to confirm that
+it is the same string or find the commit that is responsible
+for eventual changes.
+
+
+printk() Is Not a Stable KABI
+=============================
+
+Several developers are afraid that exporting all these implementation
+details into the user space will transform particular printk() calls
+into KABI.
+
+But it is exactly the opposite. printk() calls must _not_ be KABI.
+And the printk index helps user space tools to deal with this.
+
+
+Subsystem specific printk wrappers
+==================================
+
+The printk index is generated using extra metadata that are stored in
+a dedicated .elf section ".printk_index". It is achieved using macro
+wrappers doing __printk_index_emit() together with the real printk()
+call. The same technique is used also for the metadata used by
+the dynamic debug feature.
+
+The metadata are stored for a particular message only when it is printed
+using these special wrappers. It is implemented for the commonly
+used printk() calls, including, for example, pr_warn(), or pr_once().
+
+Additional changes are necessary for various subsystem specific wrappers
+that call the original printk() via a common helper function. These needs
+their own wrappers adding __printk_index_emit().
+
+Only few subsystem specific wrappers have been updated so far,
+for example, dev_printk(). As a result, the printk formats from
+some subsystes can be missing in the printk index.
+
+
+Subsystem specific prefix
+=========================
+
+The macro pr_fmt() macro allows to define a prefix that is printed
+before the string generated by the related printk() calls.
+
+Subsystem specific wrappers usually add even more complicated
+prefixes.
+
+These prefixes can be stored into the printk index metadata
+by an optional parameter of __printk_index_emit(). The debugfs
+interface might then show the printk formats including these prefixes.
+For example, drivers/acpi/osl.c contains::
+
+  #define pr_fmt(fmt) "ACPI: OSL: " fmt
+
+  static int __init acpi_no_auto_serialize_setup(char *str)
+  {
+	acpi_gbl_auto_serialize_methods = FALSE;
+	pr_info("Auto-serialization disabled\n");
+
+	return 1;
+  }
+
+This results in the following printk index entry::
+
+  <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
+
+It helps matching messages from the real log with printk index.
+Then the source file name, line number, and function name can
+be used to match the string with the source code.
MAINTAINERS +0 -0
index fd768d43e048..ad8625130ea9 100644
@@ -15855,6 +15855,7 @@ F:	kernel/printk/

PRINTK INDEXING
R: Chris Down <[email protected]>
S: Maintained
+F: Documentation/core-api/printk-index.rst
F: kernel/printk/index.c

PROC FILESYSTEM

Signature · 1 line
2.26.2
#2 lore raw
Quoted 9 lines · Chris Down
Quoted 5 lines · Petr Mladek

Document the printk index feature. The primary motivation is to explain that it is not creating KABI from particular printk() calls.

This looks great, thanks a lot for spending the time to write this up. Just some very minor comments.

Ah, I forgot to do the small fixup when pushing. So, I did it now are rebased.

Quoted 11 lines
Quoted 11 lines
Documentation/core-api/printk-index.rst new file +9 -0
+User Interface
+==============
+
+The index of printk formats are split in into separate files. The files are
+named according to the binaries where the printk formats are built-in. There
+is always "vmlinux" and optionally also modules, for example::
+
+   /sys/kernel/debug/printk/index/vmlinux
+   /sys/kernel/debug/printk/index/ext4
Quoted 8 lines

Documentation/core-api/printk-index.rst line 46

Quoted 6 lines
Documentation/core-api/printk-index.rst new file +6 -0
+   /sys/kernel/debug/printk/index/scsi_mod
+
+Note that only loaded modules are shown. Also printk formats from a module
+might appear in "vmlinux" when the module is built-in.
+
+The content is inspired by the dynamic debug interface and looks like::

s/::/:/

The double double dots '::' cause that the following paragraph will be block quoting. There is only single ':' in the generated html.

Quoted 9 lines

Documentation/core-api/printk-index.rst line 56

Quoted 9 lines
Documentation/core-api/printk-index.rst new file +9 -0
+   $> head -1 /sys/kernel/debug/printk/index/vmlinux; shuf -n 5 vmlinux
+   # <level[,flags]> filename:line function "format"
+   <5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
+   <4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
+   <6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
+   <6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
+   <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
+
+, where the meaning is::

I uses only single double dot here.

Quoted 3 lines
Quoted 1 line

+ - level: log level

Maybe worth noting that level may not be there if we have a KERN_CONT.

I added:

- :level: log level value: 0-7 for particular severity, -1 as default, 'c' as continuous line without an explicit log level

Quoted 6 lines
Quoted 1 line

+ - flags: optional flags: currently only 'c' for KERN_CONT

+ - filename:line: source filename and line number of the related

Documentation/core-api/printk-index.rst line 64

Quoted 4 lines
Documentation/core-api/printk-index.rst new file +4 -0
+	printk() call. Note that there are many wrappers, for example,
+	pr_warn(), pr_warn_once(), dev_warn().
+   - function: function name where the printk() call is used.
+   - format: format string

I added few more double dots to generate bold: 'level', 'flags', 'filename:line', etc.

See the updated commit at
https://git.kernel.org/pub/scm/linux/kernel/git/printk/linux.git/commit/?h=for-5.19&id=a5c7a39f508ae1fd3288493b96dd26079bae41bf

Best Regards,
Petr