Skip to contentSkip to conversation

bugfix for testpmd

PATCH In review Min Hu (Connor) 4 participants 10 messages Apr 6, 2022 – May 12, 2022

lore
Share & tools
lore
#0 lore raw

cover bugfix for testpmd

This patch set contains two bugfixes for testpmd.

Huisong Li (1):
app/testpmd: fix incorrect MTU verification

Min Hu (Connor) (1):
app/testpmd: fix stats get when display fwd stats

 app/test-pmd/cmdline.c |  4 ---
 app/test-pmd/config.c  | 65 ++++++++++++++++++++++++++++++++++++++++--
 app/test-pmd/testpmd.c | 16 +++++++++--
 3 files changed, 77 insertions(+), 8 deletions(-)
Signature · 1 line
2.33.0
#1 lore raw

PATCH 1/2 app/testpmd: fix stats get when display fwd stats

In function 'fwd_stats_display', if function 'rte_eth_stats_get' fails, 'stats' is uncertainty value. The display result will be abnormal.

This patch check the return value of 'rte_eth_stats_get' to avoid display abnormal stats.

Fixes 53324971a14e ("app/testpmd: display/clear forwarding stats on demand")
---
 app/test-pmd/config.c  | 10 ++++++++--
 app/test-pmd/testpmd.c | 16 ++++++++++++++--
 2 files changed, 22 insertions(+), 4 deletions(-)
app/test-pmd/config.c +8 -2
index cc8e7aa138..bd689f9f86 100644
@@ -249,14 +249,20 @@ nic_stats_display(portid_t port_id)
 								diff_ns;
 	uint64_t mpps_rx, mpps_tx, mbps_rx, mbps_tx;
 	struct rte_eth_stats stats;
-
 	static const char *nic_stats_border = "########################";
+	int ret;
 
 	if (port_id_is_invalid(port_id, ENABLED_WARN)) {
 		print_valid_ports();
 		return;
 	}
-	rte_eth_stats_get(port_id, &stats);
+	ret = rte_eth_stats_get(port_id, &stats);
+	if (ret != 0) {
+		fprintf(stderr,
+			"%s: Error: failed to get stats (port %u): %d",
+			__func__, port_id, ret);
+		return;
+	}
 	printf("\n  %s NIC statistics for port %-2d %s\n",
 	       nic_stats_border, port_id, nic_stats_border);
 
app/test-pmd/testpmd.c +14 -2
index fe2ce19f99..79bb23264b 100644
@@ -1982,6 +1982,7 @@ fwd_stats_display(void)
 	struct rte_port *port;
 	streamid_t sm_id;
 	portid_t pt_id;
+	int ret;
 	int i;
 
 	memset(ports_stats, 0, sizeof(ports_stats));
@@ -2013,7 +2014,13 @@ fwd_stats_display(void)
 		pt_id = fwd_ports_ids[i];
 		port = &ports[pt_id];
 
-		rte_eth_stats_get(pt_id, &stats);
+		ret = rte_eth_stats_get(pt_id, &stats);
+		if (ret != 0) {
+			fprintf(stderr,
+				"%s: Error: failed to get stats (port %u): %d",
+				__func__, pt_id, ret);
+			continue;
+		}
 		stats.ipackets -= port->stats.ipackets;
 		stats.opackets -= port->stats.opackets;
 		stats.ibytes -= port->stats.ibytes;
@@ -2108,11 +2115,16 @@ fwd_stats_reset(void)
 {
 	streamid_t sm_id;
 	portid_t pt_id;
+	int ret;
 	int i;
 
 	for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
 		pt_id = fwd_ports_ids[i];
-		rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+		ret = rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+		if (ret != 0)
+			fprintf(stderr,
+				"%s: Error: failed to clear stats (port %u):%d",
+				__func__, pt_id, ret);
 	}
 	for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
 		struct fwd_stream *fs = fwd_streams[sm_id];
Signature · 1 line
2.33.0
Acked-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] app/testpmd: fix stats get when display fwd stats

Quoted 74 lines · Min Hu (Connor)

In function 'fwd_stats_display', if function 'rte_eth_stats_get' fails, 'stats' is uncertainty value. The display result will be abnormal.

This patch check the return value of 'rte_eth_stats_get' to avoid display abnormal stats.

Fixes 53324971a14e ("app/testpmd: display/clear forwarding stats on demand")
---
  app/test-pmd/config.c  | 10 ++++++++--
  app/test-pmd/testpmd.c | 16 ++++++++++++++--
  2 files changed, 22 insertions(+), 4 deletions(-)
app/test-pmd/config.c +8 -2
index cc8e7aa138..bd689f9f86 100644
@@ -249,14 +249,20 @@ nic_stats_display(portid_t port_id)
  								diff_ns;
  	uint64_t mpps_rx, mpps_tx, mbps_rx, mbps_tx;
  	struct rte_eth_stats stats;
-
  	static const char *nic_stats_border = "########################";
+	int ret;
 
  	if (port_id_is_invalid(port_id, ENABLED_WARN)) {
  		print_valid_ports();
  		return;
  	}
-	rte_eth_stats_get(port_id, &stats);
+	ret = rte_eth_stats_get(port_id, &stats);
+	if (ret != 0) {
+		fprintf(stderr,
+			"%s: Error: failed to get stats (port %u): %d",
+			__func__, port_id, ret);
+		return;
+	}
  	printf("\n  %s NIC statistics for port %-2d %s\n",
  	       nic_stats_border, port_id, nic_stats_border);
 
app/test-pmd/testpmd.c +9 -1
index fe2ce19f99..79bb23264b 100644
@@ -1982,6 +1982,7 @@ fwd_stats_display(void)
  	struct rte_port *port;
  	streamid_t sm_id;
  	portid_t pt_id;
+	int ret;
  	int i;
 
  	memset(ports_stats, 0, sizeof(ports_stats));
@@ -2013,7 +2014,13 @@ fwd_stats_display(void)
  		pt_id = fwd_ports_ids[i];
  		port = &ports[pt_id];
 
-		rte_eth_stats_get(pt_id, &stats);
+		ret = rte_eth_stats_get(pt_id, &stats);
+		if (ret != 0) {
+			fprintf(stderr,
+				"%s: Error: failed to get stats (port %u): %d",
+				__func__, pt_id, ret);
+			continue;
+		}
  		stats.ipackets -= port->stats.ipackets;
  		stats.opackets -= port->stats.opackets;
  		stats.ibytes -= port->stats.ibytes;
@@ -2108,11 +2115,16 @@ fwd_stats_reset(void)
  {
  	streamid_t sm_id;
  	portid_t pt_id;
+	int ret;

app/test-pmd/testpmd.c fwd_stats_reset(void) · line 2127

Quoted 10 lines
app/test-pmd/testpmd.c +5 -1
  	int i;
 
  	for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
  		pt_id = fwd_ports_ids[i];
-		rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+		ret = rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+		if (ret != 0)
+			fprintf(stderr,
+				"%s: Error: failed to clear stats (port %u):%d",
+				__func__, pt_id, ret);

Should we clear "ports[pt_id].stats" in this condition.

app/test-pmd/testpmd.c fwd_stats_reset(void) · line 2130

Quoted 3 lines
app/test-pmd/testpmd.c +0 -0
  	}
  	for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
  		struct fwd_stream *fs = fwd_streams[sm_id];

As such LGTM

#3 lore raw

Re: [PATCH 1/2] app/testpmd: fix stats get when display fwd stats

Hi, Singh,

Quoted 75 lines · Aman Deep
Quoted 72 lines · Min Hu (Connor)

In function 'fwd_stats_display', if function 'rte_eth_stats_get' fails, 'stats' is uncertainty value. The display result will be abnormal.

This patch check the return value of 'rte_eth_stats_get' to avoid display abnormal stats.

Fixes 53324971a14e ("app/testpmd: display/clear forwarding stats on demand")

---
  app/test-pmd/config.c  | 10 ++++++++--
  app/test-pmd/testpmd.c | 16 ++++++++++++++--

  2 files changed, 22 insertions(+), 4 deletions(-)
app/test-pmd/config.c +8 -2
index cc8e7aa138..bd689f9f86 100644
@@ -249,14 +249,20 @@ nic_stats_display(portid_t port_id)
                                   diff_ns;
       uint64_t mpps_rx, mpps_tx, mbps_rx, mbps_tx;
       struct rte_eth_stats stats;
-
       static const char *nic_stats_border = "########################";
+    int ret;
       if (port_id_is_invalid(port_id, ENABLED_WARN)) {
           print_valid_ports();
           return;
       }
-    rte_eth_stats_get(port_id, &stats);
+    ret = rte_eth_stats_get(port_id, &stats);
+    if (ret != 0) {
+        fprintf(stderr,
+            "%s: Error: failed to get stats (port %u): %d",
+            __func__, port_id, ret);
+        return;
+    }
       printf("\n  %s NIC statistics for port %-2d %s\n",
              nic_stats_border, port_id, nic_stats_border);
app/test-pmd/testpmd.c +9 -1
index fe2ce19f99..79bb23264b 100644
@@ -1982,6 +1982,7 @@ fwd_stats_display(void)
       struct rte_port *port;
       streamid_t sm_id;
       portid_t pt_id;
+    int ret;
       int i;
       memset(ports_stats, 0, sizeof(ports_stats));
@@ -2013,7 +2014,13 @@ fwd_stats_display(void)
           pt_id = fwd_ports_ids[i];
           port = &ports[pt_id];
-        rte_eth_stats_get(pt_id, &stats);
+        ret = rte_eth_stats_get(pt_id, &stats);
+        if (ret != 0) {
+            fprintf(stderr,
+                "%s: Error: failed to get stats (port %u): %d",
+                __func__, pt_id, ret);
+            continue;
+        }
           stats.ipackets -= port->stats.ipackets;
           stats.opackets -= port->stats.opackets;
           stats.ibytes -= port->stats.ibytes;
@@ -2108,11 +2115,16 @@ fwd_stats_reset(void)
   {
       streamid_t sm_id;
       portid_t pt_id;
+    int ret;
       int i;
       for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
Quoted 8 lines

app/test-pmd/testpmd.c fwd_stats_reset(void) · line 2127

Quoted 7 lines
app/test-pmd/testpmd.c +5 -1
           pt_id = fwd_ports_ids[i];
-        rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+        ret = rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+        if (ret != 0)
+            fprintf(stderr,
+                "%s: Error: failed to clear stats (port %u):%d",
+                __func__, pt_id, ret);

Should we clear "ports[pt_id].stats" in this condition.

when done 'rte_eth_stats_get',
if success, 'ports[pt_id].stats' will be cleared in this function. if failed, no need to clear 'ports[pt_id].stats' as the log said.

Quoted 4 lines

app/test-pmd/testpmd.c fwd_stats_reset(void) · line 2130

Quoted 3 lines
app/test-pmd/testpmd.c +0 -0
       }
       for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
           struct fwd_stream *fs = fwd_streams[sm_id];

As such LGTM

Thanks for your comment.

Quoted 2 lines

.

#4 lore raw

PATCH 2/2 app/testpmd: fix incorrect MTU verification

In reply to Min Hu (Connor)

From: Huisong Li <[email protected]>

The macro RTE_ETHER_MIN_LEN isn't the minimum value of MTU. But testpmd used it when execute 'port config mtu 0 xx' cmd. This patch fix it.

Fixes 1bb4a528c41f ("ethdev: fix max Rx packet length")
---
 app/test-pmd/cmdline.c |  4 ---
 app/test-pmd/config.c  | 55 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+), 4 deletions(-)
app/test-pmd/cmdline.c +0 -4
index 6ffea8e21a..91e4090582 100644
@@ -2050,10 +2050,6 @@ cmd_config_mtu_parsed(void *parsed_result,
 {
 	struct cmd_config_mtu_result *res = parsed_result;
 
-	if (res->value < RTE_ETHER_MIN_LEN) {
-		fprintf(stderr, "mtu cannot be less than %d\n", RTE_ETHER_MIN_LEN);
-		return;
-	}
 	port_mtu_set(res->port_id, res->value);
 }
 
app/test-pmd/config.c +55 -0

67 lines not on this page · raw message

Signature · 1 line
2.33.0
#5 lore raw

Re: [PATCH 2/2] app/testpmd: fix incorrect MTU verification

Quoted 93 lines · Min Hu (Connor)

From: Huisong Li <[email protected]>

The macro RTE_ETHER_MIN_LEN isn't the minimum value of MTU. But testpmd used it when execute 'port config mtu 0 xx' cmd. This patch fix it.

Fixes 1bb4a528c41f ("ethdev: fix max Rx packet length")
---
  app/test-pmd/cmdline.c |  4 ---
  app/test-pmd/config.c  | 55 ++++++++++++++++++++++++++++++++++++++++++
  2 files changed, 55 insertions(+), 4 deletions(-)
app/test-pmd/cmdline.c +0 -4
index 6ffea8e21a..91e4090582 100644
@@ -2050,10 +2050,6 @@ cmd_config_mtu_parsed(void *parsed_result,
  {
  	struct cmd_config_mtu_result *res = parsed_result;
 
-	if (res->value < RTE_ETHER_MIN_LEN) {
-		fprintf(stderr, "mtu cannot be less than %d\n", RTE_ETHER_MIN_LEN);
-		return;
-	}
  	port_mtu_set(res->port_id, res->value);
  }
 
app/test-pmd/config.c +51 -0
index bd689f9f86..1b1e738f83 100644
@@ -1254,6 +1254,57 @@ port_reg_set(portid_t port_id, uint32_t reg_off, uint32_t reg_v)
  	display_port_reg_value(port_id, reg_off, reg_v);
  }
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
+static int
+eth_dev_validate_mtu(uint16_t port_id, uint16_t mtu)
+{
+	struct rte_eth_dev_info dev_info;
+	uint32_t overhead_len;
+	uint32_t frame_size;
+	int ret;
+
+	ret = rte_eth_dev_info_get(port_id, &dev_info);
+	if (ret != 0)
+		return ret;
+
+	if (mtu < dev_info.min_mtu) {
+		fprintf(stderr,
+			"MTU (%u) < device min MTU (%u) for port_id %u\n",
+			mtu, dev_info.min_mtu, port_id);
+		return -EINVAL;
+	}
+	if (mtu > dev_info.max_mtu) {
+		fprintf(stderr,
+			"MTU (%u) > device max MTU (%u) for port_id %u\n",
+			mtu, dev_info.max_mtu, port_id);
+		return -EINVAL;
+	}
+
+	overhead_len = eth_dev_get_overhead_len(dev_info.max_rx_pktlen,
+			dev_info.max_mtu);
+	frame_size = mtu + overhead_len;
+	if (frame_size > dev_info.max_rx_pktlen) {
+		fprintf(stderr,
+			"Frame size (%u) > device max frame size (%u) for port_id %u\n",
+			frame_size, dev_info.max_rx_pktlen, port_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
  void
  port_mtu_set(portid_t port_id, uint16_t mtu)
  {

app/test-pmd/config.c port_mtu_set(portid_t port_id, uint16_t mtu) · line 1323

Quoted 10 lines
app/test-pmd/config.c +4 -0
@@ -1263,6 +1314,10 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
  	if (port_id_is_invalid(port_id, ENABLED_WARN))
  		return;
 
+	diag = eth_dev_validate_mtu(port_id, mtu);
+	if (diag != 0)
+		return;
+
  	if (port->need_reconfig == 0) {
  		diag = rte_eth_dev_set_mtu(port_id, mtu);
  		if (diag != 0) {

I just wanted to know if these added functions eth_dev_validate_mtu() &  eth_dev_get_overhead_len() are copy of ethdev library API's in file "rte_ethdev.c", which get called by rte_eth_dev_set_mtu. Is our intent, is to call these twice ?

#6 lore raw

Re: [PATCH 2/2] app/testpmd: fix incorrect MTU verification

Quoted 99 lines · Aman Deep
Quoted 97 lines · Min Hu (Connor)

From: Huisong Li <[email protected]>

The macro RTE_ETHER_MIN_LEN isn't the minimum value of MTU. But testpmd used it when execute 'port config mtu 0 xx' cmd. This patch fix it.

Fixes 1bb4a528c41f ("ethdev: fix max Rx packet length")

---
  app/test-pmd/cmdline.c |  4 ---
  app/test-pmd/config.c  | 55 ++++++++++++++++++++++++++++++++++++++++++

  2 files changed, 55 insertions(+), 4 deletions(-)
app/test-pmd/cmdline.c +0 -3
index 6ffea8e21a..91e4090582 100644
@@ -2050,10 +2050,6 @@ cmd_config_mtu_parsed(void *parsed_result,
   {
       struct cmd_config_mtu_result *res = parsed_result;
   -    if (res->value < RTE_ETHER_MIN_LEN) {
-        fprintf(stderr, "mtu cannot be less than %d\n", 
 RTE_ETHER_MIN_LEN);
-        return;
-    }
       port_mtu_set(res->port_id, res->value);
   }

  diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index bd689f9f86..1b1e738f83 100644

app/test-pmd/config.c +0 -0
@@ -1254,6 +1254,57 @@ port_reg_set(portid_t port_id, uint32_t 
 reg_off, uint32_t reg_v)
       display_port_reg_value(port_id, reg_off, reg_v);
   }

  +static uint32_t

app/test-pmd/config.c +43 -0
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+    uint32_t overhead_len;
+
+    if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+        overhead_len = max_rx_pktlen - max_mtu;
+    else
+        overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+    return overhead_len;
+}
+
+static int
+eth_dev_validate_mtu(uint16_t port_id, uint16_t mtu)
+{
+    struct rte_eth_dev_info dev_info;
+    uint32_t overhead_len;
+    uint32_t frame_size;
+    int ret;
+
+    ret = rte_eth_dev_info_get(port_id, &dev_info);
+    if (ret != 0)
+        return ret;
+
+    if (mtu < dev_info.min_mtu) {
+        fprintf(stderr,
+            "MTU (%u) < device min MTU (%u) for port_id %u\n",
+            mtu, dev_info.min_mtu, port_id);
+        return -EINVAL;
+    }
+    if (mtu > dev_info.max_mtu) {
+        fprintf(stderr,
+            "MTU (%u) > device max MTU (%u) for port_id %u\n",
+            mtu, dev_info.max_mtu, port_id);
+        return -EINVAL;
+    }
+
+    overhead_len = eth_dev_get_overhead_len(dev_info.max_rx_pktlen,
+            dev_info.max_mtu);
+    frame_size = mtu + overhead_len;
+    if (frame_size > dev_info.max_rx_pktlen) {
+        fprintf(stderr,
+            "Frame size (%u) > device max frame size (%u) for 

port_id %u\n",
+            frame_size, dev_info.max_rx_pktlen, port_id); +        return -EINVAL;
+    }

app/test-pmd/config.c +4 -0
+
+    return 0;
+}
+

  void
  port_mtu_set(portid_t port_id, uint16_t mtu)
  {

app/test-pmd/config.c +1 -0
@@ -1263,6 +1314,10 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
       if (port_id_is_invalid(port_id, ENABLED_WARN))
           return;
   +    diag = eth_dev_validate_mtu(port_id, mtu);
+    if (diag != 0)
Quoted 8 lines

app/test-pmd/config.c port_mtu_set(portid_t port_id, uint16_t mtu) · line 1323

Quoted 5 lines
app/test-pmd/config.c +2 -0
+        return;
+
       if (port->need_reconfig == 0) {
           diag = rte_eth_dev_set_mtu(port_id, mtu);
           if (diag != 0) {

I just wanted to know if these added functions eth_dev_validate_mtu() &  eth_dev_get_overhead_len() are copy of ethdev library API's in file "rte_ethdev.c", which get called by rte_eth_dev_set_mtu. Is our intent, is to call these twice ?

If port->need_reconfig is 1, rte_eth_dev_set_mtu doesn't be called, and MTU value is saved to port->dev_conf.rxmode.mtu. This dev_conf.rxmode.mtu will be set to driver in dev_configure(). This check is performed to prevent dev_configure() failure. That's what I think.

Quoted 1 line

.

Acked-by
#7 lore raw

Re: [PATCH 2/2] app/testpmd: fix incorrect MTU verification

Quoted 14 lines · lihuisong (C)
Quoted 12 lines · Aman Deep
Quoted 10 lines · Min Hu (Connor)

From: Huisong Li <[email protected]>

The macro RTE_ETHER_MIN_LEN isn't the minimum value of MTU. But testpmd used it when execute 'port config mtu 0 xx' cmd. This patch fix it.

Fixes 1bb4a528c41f ("ethdev: fix max Rx packet length")

<...>

Quoted 13 lines
Quoted 5 lines
Quoted 5 lines
app/test-pmd/config.c +1 -0
@@ -1263,6 +1314,10 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
       if (port_id_is_invalid(port_id, ENABLED_WARN))
           return;
   +    diag = eth_dev_validate_mtu(port_id, mtu);
+    if (diag != 0)
Quoted 8 lines

app/test-pmd/config.c port_mtu_set(portid_t port_id, uint16_t mtu) · line 1323

Quoted 5 lines
app/test-pmd/config.c +2 -0
+        return;
+
       if (port->need_reconfig == 0) {
           diag = rte_eth_dev_set_mtu(port_id, mtu);
           if (diag != 0) {

I just wanted to know if these added functions eth_dev_validate_mtu() &  eth_dev_get_overhead_len() are copy of ethdev library API's in file "rte_ethdev.c", which get called by rte_eth_dev_set_mtu. Is our intent, is to call these twice ?

Quoted 5 lines

If port->need_reconfig is 1, rte_eth_dev_set_mtu doesn't be called, and MTU value is saved to port->dev_conf.rxmode.mtu. This dev_conf.rxmode.mtu will be set to driver in dev_configure(). This check is performed to prevent dev_configure() failure. That's what I think.

Quoted 1 line

.

Testpmd stores the MTU value and process it during start_port(), which may postpone any possible error in rte_eth_dev_configure(), so I think it is OK to duplicate the check in app level.

#8 lore raw
In reply to Min Hu (Connor)

Hi, Ferruh,
what do you think of this patch?

Quoted 13 lines · Min Hu (Connor)

This patch set contains two bugfixes for testpmd.

Huisong Li (1):
app/testpmd: fix incorrect MTU verification

Min Hu (Connor) (1):
app/testpmd: fix stats get when display fwd stats

  app/test-pmd/cmdline.c |  4 ---
  app/test-pmd/config.c  | 65 ++++++++++++++++++++++++++++++++++++++++--
  app/test-pmd/testpmd.c | 16 +++++++++--
  3 files changed, 77 insertions(+), 8 deletions(-)
#9 lore raw
Quoted 12 lines · Min Hu (Connor)

Hi, Ferruh,
    what do you think of this patch?

Quoted 8 lines · Min Hu (Connor)

This patch set contains two bugfixes for testpmd.

Huisong Li (1):
   app/testpmd: fix incorrect MTU verification

Min Hu (Connor) (1):
   app/testpmd: fix stats get when display fwd stats

Series applied to dpdk-next-net/main, thanks.