Skip to contentSkip to conversation

replace hardcode of PSR state and drop psr state check for PSR-SU MPO test

PATCH In review David Zhang 3 participants 6 messages Apr 6, 2022

lore
Share & tools
lore
#0 lore raw

cover replace hardcode of PSR state and drop psr state check for PSR-SU MPO test

David Zhang (2):
tests/amdgpu/amd_psr: use PSR state enum replace the integer tests/amdgpu/amd_psr: drop the PSR state check for PSR-SU MPO test

 tests/amdgpu/amd_psr.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/2 tests/amdgpu/amd_psr: use PSR state enum replace the integer

[why & how]
The enum of AMDGPU PSR STATE may update along the time and should be aligned to the code base of upstream. Instead of using hard- coded integer, replace them with enum PSR_STATE would be preferred and we only need to update the PSR_STATE enum if needed in the future.

Cc Rodrigo Siqueira <[email protected]>
Cc Harry Wentland <[email protected]>
Cc Leo Li <[email protected]>
Cc Jay Pillai <[email protected]>
Cc Wayne Lin <[email protected]>
---
 tests/amdgpu/amd_psr.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tests/amdgpu/amd_psr.c +4 -4
index d21d41e3..83e44c4e 100644
@@ -179,10 +179,10 @@ static void run_check_psr(data_t *data, bool test_null_crtc) {
 			continue;
 
 		psr_state =  igt_amd_read_psr_state(data->fd, output->name);
-		igt_fail_on_f(psr_state < 0, "Open PSR state debugfs failed\n");
-		igt_fail_on_f(psr_state < 1, "PSR was not enabled for connector %s\n", output->name);
-		igt_fail_on_f(psr_state == 0xff, "PSR is invalid for connector %s\n", output->name);
-		igt_fail_on_f(psr_state != 5, "PSR state is expected to be at 5 on a "
+		igt_fail_on_f(psr_state < PSR_STATE0, "Open PSR state debugfs failed\n");
+		igt_fail_on_f(psr_state < PSR_STATE1, "PSR was not enabled for connector %s\n", output->name);
+		igt_fail_on_f(psr_state == PSR_STATE_INVALID, "PSR is invalid for connector %s\n", output->name);
+		igt_fail_on_f(psr_state != PSR_STATE3, "PSR state is expected to be at PSR_STATE3 (Active) on a "
 			      "static screen for connector %s\n", output->name);
 	}
 
Signature · 1 line
2.25.1
Reviewed-by on v1 1/2
#2 lore raw

Re: [igt-dev] [PATCH 1/2] tests/amdgpu/amd_psr: use PSR state enum replace the integer

[AMD Official Use Only]

--

Regards,
Jay
________________________________
From: Zhang, Dingchen (David) <[email protected]>
Sent: Wednesday, April 6, 2022 4:28 PM
To: [email protected] <[email protected]>
Cc: Siqueira, Rodrigo <[email protected]>; Wentland, Harry <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Pillai, Aurabindo <[email protected]>; Lin, Wayne <[email protected]>
Subject: [PATCH 1/2] tests/amdgpu/amd_psr: use PSR state enum replace the integer

[why & how]
The enum of AMDGPU PSR STATE may update along the time and should be aligned to the code base of upstream. Instead of using hard- coded integer, replace them with enum PSR_STATE would be preferred and we only need to update the PSR_STATE enum if needed in the future.

Cc Rodrigo Siqueira <[email protected]>
Cc Harry Wentland <[email protected]>
Cc Leo Li <[email protected]>
Cc Jay Pillai <[email protected]>
Cc Wayne Lin <[email protected]>
---
 tests/amdgpu/amd_psr.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tests/amdgpu/amd_psr.c +4 -4
index d21d41e3..83e44c4e 100644
@@ -179,10 +179,10 @@ static void run_check_psr(data_t *data, bool test_null_crtc) {
                         continue;
 
                 psr_state =  igt_amd_read_psr_state(data->fd, output->name);
-               igt_fail_on_f(psr_state < 0, "Open PSR state debugfs failed\n");
-               igt_fail_on_f(psr_state < 1, "PSR was not enabled for connector %s\n", output->name);
-               igt_fail_on_f(psr_state == 0xff, "PSR is invalid for connector %s\n", output->name);
-               igt_fail_on_f(psr_state != 5, "PSR state is expected to be at 5 on a "
+               igt_fail_on_f(psr_state < PSR_STATE0, "Open PSR state debugfs failed\n");
+               igt_fail_on_f(psr_state < PSR_STATE1, "PSR was not enabled for connector %s\n", output->name);
+               igt_fail_on_f(psr_state == PSR_STATE_INVALID, "PSR is invalid for connector %s\n", output->name);
+               igt_fail_on_f(psr_state != PSR_STATE3, "PSR state is expected to be at PSR_STATE3 (Active) on a "
                               "static screen for connector %s\n", output->name);
         }
 

--
2.25.1

#3 lore raw

PATCH 2/2 tests/amdgpu/amd_psr: drop the PSR state check for PSR-SU MPO test

In reply to David Zhang

[why & how]
Currently the enablement of PSR-SU for Linux kernel is still WIP and the PSR state to check for PSR-SU MPO is not upstreamed yet. In addition, all the PSR-SU test case currently by default is validated with visual confirm.

Drop the PSR state check in MPO PSR-SU sub-test case in the loop.

Cc Rodrigo Siqueira <[email protected]>
Cc Harry Wentland <[email protected]>
Cc Leo Li <[email protected]>
Cc Jay Pillai <[email protected]>
Cc Wayne Lin <[email protected]>
---
 tests/amdgpu/amd_psr.c | 12 ------------
 1 file changed, 12 deletions(-)
tests/amdgpu/amd_psr.c +0 -12
index 83e44c4e..8ea73080 100644
@@ -292,18 +292,6 @@ static void run_check_psr_su_mpo(data_t *data)
 				      flip_fb->fb_id, DRM_MODE_PAGE_FLIP_EVENT, NULL);
 		igt_require(ret == 0);
 		kmstest_wait_for_pageflip(data->fd);
-
-		/* check PSR state */
-		if (i > PSR_SETTLE_DELAY * frame_rate) {
-			psr_state = igt_amd_read_psr_state(data->fd, data->output->name);
-			igt_fail_on_f(psr_state < 0, "Open PSR state debugfs failed\n");
-			igt_fail_on_f(psr_state == PSR_STATE0,
-				"PSR was not enabled for connector %s\n", data->output->name);
-			igt_fail_on_f(psr_state == PSR_STATE_INVALID,
-				"PSR is invalid for connector %s\n", data->output->name);
-			igt_fail_on_f(psr_state != PSR_STATE3,
-				"PSR state is expected to be STATE_3 for connector %s\n", data->output->name);
-		}
 	}
 
 	/* fini */
Signature · 1 line
2.25.1
Reviewed-by on v1 2/2
#4 lore raw

Re: [igt-dev] [PATCH 2/2] tests/amdgpu/amd_psr: drop the PSR state check for PSR-SU MPO test

[AMD Official Use Only]

--

Regards,
Jay
________________________________
From: Zhang, Dingchen (David) <[email protected]>
Sent: Wednesday, April 6, 2022 4:28 PM
To: [email protected] <[email protected]>
Cc: Siqueira, Rodrigo <[email protected]>; Wentland, Harry <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Pillai, Aurabindo <[email protected]>; Lin, Wayne <[email protected]>
Subject: [PATCH 2/2] tests/amdgpu/amd_psr: drop the PSR state check for PSR-SU MPO test

[why & how]
Currently the enablement of PSR-SU for Linux kernel is still WIP and the PSR state to check for PSR-SU MPO is not upstreamed yet. In addition, all the PSR-SU test case currently by default is validated with visual confirm.

Drop the PSR state check in MPO PSR-SU sub-test case in the loop.

Cc Rodrigo Siqueira <[email protected]>
Cc Harry Wentland <[email protected]>
Cc Leo Li <[email protected]>
Cc Jay Pillai <[email protected]>
Cc Wayne Lin <[email protected]>
---
 tests/amdgpu/amd_psr.c | 12 ------------
 1 file changed, 12 deletions(-)
tests/amdgpu/amd_psr.c +0 -12
index 83e44c4e..8ea73080 100644
@@ -292,18 +292,6 @@ static void run_check_psr_su_mpo(data_t *data)
                                       flip_fb->fb_id, DRM_MODE_PAGE_FLIP_EVENT, NULL);
                 igt_require(ret == 0);
                 kmstest_wait_for_pageflip(data->fd);
-
-               /* check PSR state */
-               if (i > PSR_SETTLE_DELAY * frame_rate) {
-                       psr_state = igt_amd_read_psr_state(data->fd, data->output->name);
-                       igt_fail_on_f(psr_state < 0, "Open PSR state debugfs failed\n");
-                       igt_fail_on_f(psr_state == PSR_STATE0,
-                               "PSR was not enabled for connector %s\n", data->output->name);
-                       igt_fail_on_f(psr_state == PSR_STATE_INVALID,
-                               "PSR is invalid for connector %s\n", data->output->name);
-                       igt_fail_on_f(psr_state != PSR_STATE3,
-                               "PSR state is expected to be STATE_3 for connector %s\n", data->output->name);
-               }
         }
 
         /* fini */

--
2.25.1

#5 lore raw

[igt-dev] ✗ Fi.CI.BUILD: failure for replace hardcode of PSR state and drop psr state check for PSR-SU MPO test (rev3)

In reply to David Zhang
== Series Details ==

== Series Details ==

Series: replace hardcode of PSR state and drop psr state check for PSR-SU MPO test (rev3)
URL : https://patchwork.freedesktop.org/series/102297/
State : failure

== Summary ==

Applying: tests/amdgpu/amd_psr: use PSR state enum replace the integer Using index info to reconstruct a base tree...
M tests/amdgpu/amd_psr.c
Patch failed at 0001 tests/amdgpu/amd_psr: use PSR state enum replace the integer When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".