bus: mhi: pci_generic: add Telit FN980 v1 hardware revision
Subsystems (2)
PATCH 1/1 bus: mhi: pci_generic: add Telit FN980 v1 hardware revision
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]
Signed-off-by Daniele Palmas <[email protected]>
--- drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
drivers/bus/mhi/host/pci_generic.c +38 -0
@@ -446,7 +446,45 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { +MHI_CHANNEL_CONFIG_UL (14 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (15 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (20 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_DL_AUTOQUEUE (21 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0" ,128 ,1 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0" ,128 ,2 ), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (1 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,2048 ,101 ) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name ="telit-fn980-hwv1" , + .fw ="qcom/sdx55m/sbl1.mbn" , + .edl ="qcom/sdx55m/edl.mbn" , + .config = &modem_telit_fn980_hw_v1_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .mru_default =32768 , + .sideband_wake = false, +}; +static const struct pci_device_id mhi_pci_id_table[] = { +/* Telit FN980 hardware revision v1 */ + {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x1C5D ,0x2000 ), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x18d7 ,0x0200 ), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
Signature · 1 line
2.32.0
Manivannan Sadhasivam
maintainerQuoted 47 lines · Daniele Palmas
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]Signed-off-by Daniele Palmas <[email protected]>--- drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)drivers/bus/mhi/host/pci_generic.c +29
-0@@ -446,7 +446,45 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { +MHI_CHANNEL_CONFIG_UL (14 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (15 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (20 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_DL_AUTOQUEUE (21 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0" ,128 ,1 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0" ,128 ,2 ), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (1 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,2048 ,101 ) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name ="telit-fn980-hwv1" , + .fw ="qcom/sdx55m/sbl1.mbn" , + .edl ="qcom/sdx55m/edl.mbn" , + .config = &modem_telit_fn980_hw_v1_config,
drivers/bus/mhi/host/pci_generic.c static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { · line 487
Quoted 10 lines
drivers/bus/mhi/host/pci_generic.c +9
-0+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32, + .mru_default = 32768, + .sideband_wake = false, +}; +static const struct pci_device_id mhi_pci_id_table[] = { +/* Telit FN980 hardware revision v1 */ + {PCI_DEVICE_SUB (PCI_VENDOR_ID_QCOM ,0x0306 ,0x1C5D ,0x2000 ), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },
Please rebase this patch on top of my recent patch that sorts the table [1].
Thanks,
Mani
Quoted 7 lines
drivers/bus/mhi/host/pci_generic.c +0
-0/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },Signature · 1 line
2.32.0